Export to Quicktime Movie Sound Problems

I have a 60 min. film with a lot of music that I exported to Quicktime. One 10 second section of one of the songs is distorted (crackly/choppy) in the .mov file (at the end of the song). In FCE, it sounds perfect. The original mp3 sounds perfect. The other 59:50 of the film sounds fine. Any help would be greatly appreciated.

Hello, and welcome to the Apple Discussion forums!
First thing, did you mixdown your audio before exporting from FCE?
Select the entire sequence, then do *Sequence > Render Only > Mixdown.* Try that first, it may fix things this time. Then export your video again.
Second, MP3's are not ideal for use in FCE. You really should convert audio to AIFF, 16-bit (48KHz), stereo before importing into FCE.
Another thing that could be happening, if that 10-sec is extra loud, you could be getting clipping. If so, you can keyframe around that 10-sec area and +reduce the gain+ (drag down the clip's audio level overlay line in either the Viewer or the Timeline.) Ideally, you should target -12 db in the audio meters as your max peak.

Similar Messages

  • I have FCE 4.0.1 and running OS x 10.7.5  when i burn my movie the audio from my movie clips don't come through .  My Sound effects and music can be heard.  I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it.

    I have FCE 4.0.1 and running OS x 10.7.5  when i burn my movie the audio from my movie clips don't come through .  My Sound effects and music can be heard.  First I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it.  everything sounds great in preview but then ( once again)I lose my audio from my movie clips.

    Try Mixing Down the audio before export.
    This info may help;
    https://discussions.apple.com/message/1060680?messageID=1060680&amp%3b#1060680
    Also serch this forum for Mix Down you should find lots of info.
    Al

  • Final cut pro problem when exporting with quicktime movie

    Hello!
    I must have som help beacuse my musicmovie must be finsihed untill today. I have a movie their i had used filters like colour correction and interlace. When i export with USING QUICKTIME CONVERSION and have
    keyfram 10
    bitrate 6000
    faster encode
    size 1920x1080 HD 16:9
    its not a problem the movie works fine all the way.
    But when i export with QUICKTIME MOVIE it dosent work. Some clips are frozen and some are beeing misscoloured. None of them have interlace. Its the same clips that dosent work everytime i had export with QM. I have tried to replace these clips but the same thing is happening. I dont understand why i cant use quicktime movie but it works with quicktime conversion.
    If you have an e-mail i can send you just the part where this happening.
    Please help me!
    Thanks Gabriel

    I am also expriencing the same error. Tried every solution listed so far:
    1. Switch off background rendering. Trash render files. Don't render. Export.
    2. copying the project within Final Cut Pro into another project
    3. remove the following folder: Library > Application Support > ProApps > MIO > RADPlugins > XDCAMFormat.RADPlug
    Nothing worked. I try to export to Vimeo, YouTube, and master. All error right at 9%
    What's going on?

  • Export to Quicktime movie continued crashes. HELP

    I have sequence, it renders no problem. Whenever I go to export to Quicktime movie it crashes. I have gone and deleted all files associated with it and redone the sequence from scratch, and I keep getting the same results. Crash while exporting. I am working in DV, so all I do at export is export to Quicktime movie, which means it should be exporting as a DV movie. I am not sure what is wrong please help.
    As always thanks in advance for reading and replying to my Post,
    Sebastian

    I did try burning the 18.05GB file on i-DVD but even with the auto compression of i-DVD it only managed to compress it down to 5.4GB - too large for my 4.7GB DVD.
    The only reason I need to burn it so my friend can author it is that he's a little too fussy and wants to author it on Adobe Encore.
    I managed to get a firewire drive - but the blooming PC didnt accept it as it was Mac formated!
    I just exported the original file as a QT movie, reducing sound quality, frame rate etc but it still comes out at 17.5GB - still to large for i-DVD (and thats with i-DVD's compression, which comes in at approx 5GB!)
    I really really blame myself for this as I never really looked into anything more than the creative aspect of FCP. But I've started now.

  • File type for export as quicktime movie

    I thought I read here that "Export as Quicktime Movie" produces a .mov file (although without the extension). I'm using Brightcove to host our videos, and their publishpod says it accepts .mov files, but doesn't seem to work with the file from FCE. Is it really a .mov? Or do I need to export using Quicktime Conversion (and burn up lots more time in the process?)

    Thanks...
    I did search the forum and nothing addressed my specific issue. Sorry if I didn't phrase my question clearly.
    Anyway, I suspect the problem is that the Brightcove software does not work well with the Apple Intermediate Codec. I had no problem with a .mov exported with H.264 compression. This adds extra time to my workflow, but I suspect it will be a necessary evil.

  • Export To Quicktime Movie (Reference or Self Contained) - GENERAL ERROR

    Hi -
    I recently had to re-install FCS2 due to problems with OSX.
    Now, for some reason, when I want to export from FCP to get a QT reference movie, I get a general error message. All other options from FCP export seem to work, but NOT export to Quicktime Movie.
    Any suggestions?
    Thanks.
    Chris

    how so?
    we can all do with a dummy's cheat sheet e.g. when making a master monitor the record device, not the computer.
    So come on, what'd you do?

  • Export to Quicktime/Movie to MPEG-4 Quality Much Worse with Snow Leopard?

    I just tried exporting an HD movie from iMovie using Export to Quicktime - Movie to MPEG-4 for the first time since upgrading to Snow Leopard and besides taking forever to export, the quality at the same settings I've used before is terrible. There's terrible macroblocking even on relatively slow moving scenes. I've exported several movies using the same workflow previously to upgrading and the video was perfect.
    I use mpeg-4, H.264 encoding, 4096 bit rate, 1920x1080 HD resolution, key frame every 15 frames. It's definitely a change in the encoder as just sharing to the Media Browser results in expected quality.
    As a test, I tried upping the bitrate to 5120 but it didn't help with the macroblocking.
    Anyone with similar problems and/or a solution?

    I've actually started noticing more artifacts using the Share to Media Browser quicktime presets. The movies that are created don't seem to be as high quality as ones I've created before. It's almost like quicktime is missing keyframes or something and then artifacting. It's not consistent. I've got one mobile formatted movie where it artifacts badly in the first minute and then not at all afterwards. It's kind of frustrating.

  • FCP export to "QuickTime Movie" distorts aspect ratio of all text, displays video correctly.

    Hi you all,
    My name is Alexander, I'm from Belgium.
    I'm working on Final Cut Pro 6.0.6, on a MacBook Pro with a 2.53 GHz Intel Core 2 Duo Processor, running version 10.7.2 of Mac OS X (Lion).
    I'm editing a 'making of' of a Flemish feature film. I shot this 35 minute documentary short with my own Canon HDV-camcorder (XH-A1). The Final Cut Pro-project is stored on an external hard drive (1 TB LaCie Minimus).
    I've been doing exports to "QuickTime Movie" for years now, without any problems, but since a week or two, FCP started messing up the titles over the video - and the titles only. Their aspect ratio is messed up once exported, but they look just fine in the FCP Timeline (in Viewer, I can verify that the aspect ratio of the titles is always "0"). I'm trying to export this to "HDV - 720p25".
    Here's a comparison between the two:
    As you can see: the MOV has the titles' aspect ratio all weird, the upper one partly covering the lower one. All titles and text in the docu come out like this, but the video (and audio) is exported correctly.
    Any ideas on how to solve this very annoying problem?
    Many thanks!!
    Alexander

    Hi Studio X,
    Thank you for your quick reply.
    The producers of the film want to upload this making of-documentary on YouTube. Therefore, I need to give them a high-quality-mov with the least possible Megabites. My film has a 35 minute running time.
    So I figured: Let's start with the 'smallest' high-quality FCP-export to begin with (HDV-720p25), and throw that one in Compressor, in order to end up with a 'small' but good looking H.264-MOV for YouTube.
    But for some reason, those "HDV-720p25"-exports mess up the titles. And I can't figure out why.
    Alexander

  • "General Error" when I export to quicktime movie .mov

    I have no idea why all of a sudden FCE4 says "General Error" when I export using quicktime movie... If i use another option like mpeg4 or other it works fine. What could be a problem?
    I have lots of memory.

    I made the movie self contained and it started but then stops at 10%. This isnt anything complex just a few clips edited together w/ music. I just want to upload to youtube. I have no idea what the deal is!

  • Footage is jumpy after exporting to Quicktime movie

    I have final cut pro 7 and im working with to different type of footage. One is from my canon t2i and the other is sony 500v AVCHD. Everything was logged and transfered correctly as prores. Everything plays well in the sequence no jumping between between muiltcam shots.The problem comes into play when i right click on the sequence and export to Quicktime movie. I keep all of the default setting of the sequence it was created from. Again everything plays GREAT in the sequence, so i dont think i have any corrupt files.Its weird its like it jumps from 100% on a clip to 98% and then back again. It doesn't play this way thru the entire sequence. I have the new 27 IMac

    Did you transcode to ProRes HQ?
    If so, your system and or hard drive may not have enough juice to play it back in Quicktime without skipping.
    ProRes LT is what your clips should be transcoded to.
    If you have Unlimited RT activated for the sequence with dynamic settings, it may appear to play back correctly, but actually the quality and/or frame rate may be lowered slightly for realtime playback.

  • I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black.  I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

    I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black.  I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

    I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black.  I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

  • Export to Quicktime Movie rerendering. Why?

    Hi
    I have a DV project edited in FCP 5.11 which is all completely rendered. It's actually made up of a number of sequences joined end to end each of which is rendered before rendering the final 'top' sequence. There are some heavily rendered motion still sections in there, so I don't really want to render them again.
    However when I Export to Quicktime Movie, using the current settings, ie not making a self-contained movie, it takes hours to render and looks like it is rerendering everything I painstakingly made sure was rendered to full quality already. Is there anything I can do to stop it doing this? (I am doing this to make things much easier for Compressor, rendering the whole project as a referenced movie.)
    Thanks for your attention.
    Regards
    Jeff Cole
    PowerMac G5 Dual 2Ghz   Mac OS X (10.4.6)  

    Just checking that you are, in fact, leaving the menu as Current Settings... and not changing it to match the settings of your timeline...
    Also, you say you are not making a self contained movie - you've left that unchecked? Are you sure you don't have any gray realtime bars over the top of your clips - resize, dissolve, etc don't require rendering until export. You need to check the Render All menu (opt-r) under Sequence has everything checked...
    Patrick

  • "Export as Quicktime Movie" -- won't play on other computers

    When I use the "Export as Quicktime Movie" option and try to play it back on a Mac without FCP installed, it is missing components and won't play back in Quicktime Player. Of course, I can export with various compressions and then it's fine, but sometimes I want that big "original" file. Any thoughts? Thanks!
    Message was edited by: elisenew

    You do need the codec you are exporting to installed in the other machine if you wish to play the exported file. A variety of codecs are available only with FCP installed.
    A couple of possible solutions are a very high res H.264 or Download [ProRes decoder|http://support.apple.com/downloads/AppleProRes_QuickTime_Decoder_1_0_forMac] to share a prores file between machines.

  • How to export a Quicktime movie from IDVD ?

    How to export a Quicktime movie from IDVD ?

    Do you have a DVD that you want to get the video from?  Is it a commercial DVD or one that you created yourself?
    OT

  • Keynote 08 - problem exporting to Quicktime (no sound or video clip)

    Hi
    Having just spent a long time making and narrating a training slideshow intended for a screencast using Keynote 08 (4.0.3) I choose to export the show as a quicktime movie with the recording timings and recording narrative soundtrack. A screenshot of my settings is below.
    The problems I have are:
    1. The recorded narration is not present in the QT Mov file
    2. A video animation of an embedded movie (screen capture) displays the first frame but does not play automatically
    The show works fine if I play it in Keynote, but this is no good as I want to put it on the web!
    Uploaded with plasq's Skitch!
    If anyone has any ideas or similar experiences, please let me know
    Thanks
    Nick

    Just thought I would add my voice to the chorus... I am having the same problem.
    Also note that this error will prevent you from being able to "Send To">"YouTube" as well.
    I am seeing the exact same issues reported here by everyone else. Not sure what update screwed this up, but it was working fine less than a month ago (I do a series of 5 keynote presentations each month and it worked for the first one I did on June 7 but has not worked for the last two I tried).
    I am also in need of a fast solution for this. I am pretty much dead in the water till I get a solution going.
    My flash export also results in out of sync audio. Do I have to dig up powerpoint?
    Also, it looks as if Quicktime is having a hard time with the file. Quicktime suddenly becomes very sluggish (IE: tons of delay when you click on menus or on pause when the keynote export is playing). Quicktime is NOT having these problems with video files from other sources.
    R
    Message was edited by: Robert Whitelaw

Maybe you are looking for

  • Deleting photos from ipod

    i have all photos automatically updated on my ipod when i plug it in, but now i'd like to delete some of the photos that are on the ipod. they're no longer in the folder that updates to my ipod, but they're still on the ipod. how do i delete them? th

  • XML Help Needed- SYS_XMLGEN

    Hi, How to eliminate the default "ROW" tag from the below result? Result: <?xml version="1.0"?> <ROW> <request> <operationId>SERVICE</operationId> <transactionId>12</transactionId> <processId>123</processId> <parameters> <Department Type="integer" nu

  • Command line error on Windows server 2008, GUI works

    I'm running Windows Server 2008 with a Blackmagic Decklink card. Everything works fine with the GUI but when I try to start from command line it extis with an error (see attached image). Note: I have the desktop experience enabled.

  • Is it possible to have spare 'VM Manager'?

    Is it possible to have spare 'VM Manager'? I want to enable two or more managers to connect the same server pool and same virtual host. If it is possible,when a manager breaks,we can use spare manager,

  • I TUNES 7 ****!!!!!!

    ever since i upgrade to 7 i have tons of problems: takes forever to open the app, seems like my hd's looking for smthing and it takes forever. i try to quit the app to no avail, then all other apps i got open freeze and i got to restart the computer.