Export video with Lumetri effects - 2 to 3 videos render fine, after that flickering, colored frames
After I spent 45 minutes waiting to be transferred to to right department with the support chat, only to find out technical support isn't available during the hours I called, I am going to try this outlet to get some advice:
I have about 50 video files to export, each 20 seconds to 2 minutes long. They all have Lumetri effects on them (I suppose that's what causes the problem).
I can render 2, maybe 3 videos without problems. The next one might be fine for a while, but then all I get is strobelight frames, flickering, and different color frames. One time I even received a blue screen of death. I restart Media Encoder, add files to the queue, same thing happens. 2 - 3 will work, after that it exports garbage.
I am using Premiere Pro CC to edit the video, Media Encoder CC to export it.
The original footage is HDV 50i - 1440 px by 1080px - 1.333 pixelr ratio.
Besides some dip to black and cross transitions the only other effect is a title layer with some static color effects on it, and 2 Lumetri effects (warm midtones and dream 1).
I thought at first maybe it is because I encode in FLV, 1800 mbps, but also when I used uncomressed AVI with the same settings as the original footage the same problem occured.
I have two ATI radeon HD 6950s 1GB in my pc hooked together with cross fire, 16GB ram, the project file is on a SSD, the raw footage on a HDD. AMD Phenom II x4 processor with 3.4 GHz.
OS: Windows 7 64bit.
I did update to the latest GPU driver last night - that didnt fix the problem.
Since I noticed the fans becoming quite loud during rendering, I did put two Ice packs from the freezer on top of the case and pulled it away from the wall a little bit to allow for better cooling (and it did stay a lot cooler with the ice packs).
I do also get funky looking frames inside Adobe Premiere after trying to watch the footage with the Lumetri filter for a while. I'll have to restart the program and it'll work fine.
Any suggestions what I could do? Settings, or something? I dont want to attend to my machiene for so many hours, importing 2 video files at a time, having to review each of them for errors. I'd rather set it up once, and let them all render...
@Peter Garaway:
Thanks for the response.
I use two Lumetri effects:
Warm Midtones
Dream 1
Both applied directly to the clip of raw footage which is in the sequence that gets exported. There is actually one sequence, where I fixed some of the footage putting it into another sequence first, then the sequence into the final sequence that gets exported.
All my clips have both Lumetri effects applied to them. The flickering took place randomly, but it would definitely get worse the more I attempted to render (the first 2 to 3 no problems, on the 3rd or 4th maybe a few flicker seconds in the middle, any more would be 100% flickering - if any flickering or only like a green solid...)
Now Shrishti from tech support insisted the problem was within the sequence. And that kind of made sense, because once we successfully rendered one sequence, there would be no more trouble rendering it a second time, even if the program was already in flicker mode. And also for some reason while we were playing around with it when one sequence failed, even after restarting Media Encoder, it would fail again afterwards.
However last night after it failed I would just try again, doing 2 at a time and it would be successful.
Now I say it failed, but of course no errors no nothing... Just as in the result didn't look the way it was supposed to.
Also I want to mention that especially when I kept it running after it failed (meaning you leave it runnning, producing only garbage) the fans of my computer kept running louder and louder. Not sure if it was the GPU or CPU. Rigth now it keeps rendering in Software mode and the fans are barely louder than under normal usage.
I use the AMD catalyst driver which I downloaded from here:
http://support.amd.com/us/gpudownload/windows/Pages/radeonaiw_win8-64.aspx
While Shrishti was trying a couple of different settings at one time the screen went dark, as it came back on there was a message coming from the windows tray, saying the display driver had crashed, but recovered. One time I also received a bluescreen message, which I will try to attach to this post.
well i guess it doesnt have too much information on there other than... what is that? a memory address?
This happened I believe after the first attempt with the updated driver (I updated from 13.3 to 13.4 )
Similar Messages
-
Hi, I've an iPad Mini with the latest version 6.0.2, a windows 7 Home Premium laptop and iTunes 11.0.1 (12), but I can't synchronize my music or videos with it. I managed to syncronize my books but thats all.
I also have an iphone 5 and everything seems to work fine with it.
I see all movies and music available to be sync but when I click on the sync button, the process starts, the bottom bar shows an increase in consumed space then nothing happens and the bar goes back as nothing was added.
Please help..
I have tried everything but nothing works.Thanks Sk8dreams,
....but I wish I could have lol like u right now..
If I could get a free iPad everything I'd already kept my iPad connected and restarted iTunes, I think I'd have had a truckload of them by now...
I've done all of these..
Like I said earlier I syncd everything to my iphone5 successfully...
I got my PDF ebooks to this same iPad... Films & Music do not seem to be getting through..
I'm sure someone out there knows what to do.. -
I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?, I have built a android application using adobe flex, and i have exported it with native air. The application is working fine on samsung phones whereas it is getting crashed on Moto Phones, which runs on android kitkat, is there any compatibility issue ?
Thanks, Flex harUI, for the direction in regards to isolating build changes. That aside (still working on it), can you offer any direction in regards to my original question on SDK and AIR compatibility? I'm specifically looking for a version compatibility mapping or anything that definitively states, "Flex SDK x.y.z works with the following versions of AIR". This information is crucial for us in order to more specifically plan our own roadmap built upon these two frameworks as we consider both existing installations of our software and future distributions.
-
Apple TV3 doesn't start automatically when I select airplay from my iMac (Yosemite) and Ipad 3( iOS 8.1.3) i have to manually turn it on then it works fine after that! what is wrong with which setting.
You need to re install OSX. If you have the dmg file downloaded via torrentz this is how you can create a bootable external HD or Flash drive (8 GB+)
https://discussions.apple.com/message/23957654#23957654
Peace
Harry -
Hello! I have a problem with a credit card. I bought one program, after that i wanted buy one more, but it wrote that with my card something wrong. After that i wanted change my card (VISA) on "NONE". But there no NONE! I can't download FREE apps! Than I wanted make new account and select NONE, but there no NONE, there only cards. Help, please!
Hey Shamannnig!
Here is an article that can explain a little more about this situation:
Why can’t I select None when I edit my payment information?
http://support.apple.com/kb/ts5366
Thanks for using the Apple Support Communities!
Cheers,
Braden -
What is Causing Lag with Lumetri Effect?
I get some lag when I add the Lumetri effect, I was wondering what is causing it?
My system:
3930k overclocked
32G Ram
SSD for media drive
Please watch the video below.Bart Walczak answered my question and it worked!
Try turning off your reference monitor and see if the lag persists. -
How can I retain Speedgrade Lumetri effect on a Premiere clip when dynamic linking that clip to Afte
I'm trying to streamline the workflow between me (editor) and the animator at my office.
Right now we are exporting clips as ProRes files to be tracked and rotoscoped by the animator in AE and then dropping them back in Premiere. We work off a server so it would be much faster to simply dynamic link my clip that needs screen replacement animation into an After Effects comp. Then the animator could open that After Effects file on the server and do their work then just save it so it will automatically repopulate in my timeline with the tracked shot.
The problem is here. I want to color correct in Speedgrade before animation so I'm not having to track around screens. So I color correct and the clips come back to Premiere with the Speedgrade Lumetri effects applied. Then I dynamic link to AE. But when the tracked shot returns from AE, the Lumetri color effect is completely lost, which causes me to have to re-color and track around the screen replacement animation.
Does anyone have any tips for this? The help is much appreciated.I just responded to this on another thread, but let me repeat it here for convenience:
Like you, I too (and I presume most everyone) first send to SG for color correction and then (actually after another SG trip for grading) replace with AE comp for effects work. And when I try that with my CC 2014, I have the same issue (all SG effects disappear after replace with AE comp). But I believe I've found a simple workaround (at least working great so far):
Instead of replace with AE comp, open AE and drag the PP comp to the AE projects - it will appear like a clip.
Create an AE comp with that and do your thing.
Save as AE project and import it into PP - it will appear like a clip that you can use in PP (as if you'd done a replace with AE comp).
Everything will be dynamic: if you change the SG corrections, the changes will get reflected everywhere (in AE as well as the AE project imported in PP), and what you do in SG will apply BEFORE the AE stuff, which is exactly what we want. Looks like Adobe put all the capability in, but the replace with AE comp is not making use of it yet - I will report this.
One other related issue is that for some weird reason, you can't drag the imported AE project in PP onto a PP sequence, BUT you can select it and ask to create a new PP sequence! Go figure. -
Video with Synched Slides used as a Video Component ?
I would like to take an existing Synched video and slide show
.fla file and convert it to a FLV file for insertion onto a page
with multiple videos. I was willing to try and convert to QT format
and then convert to FLV and drop the video component on the page,
however CS3 reqiuries you to output in flash 5 format for QT
conversion....... CS3 wont let you convert synched slides and video
below flash 6. Hope this makes sense to somebody.... I suppose
there is a much better way to handle what I am trying to do.... Any
help would be most appreciated ....It seems like your trying to composite......Did you try after
effects?
I think you can do this easily in after effects. -
I dont want to the people in the main video to become transpartent (ghostly) I only want that to happen with the copy that I am overlaping. The copy will not be at the same starting point as the original, it will be slightly ahead. Everything ive tried has left the video lighter or darker then the original and it looks weird, it was used with a tripod so nothing changes in the video except for the posiioning of the people. I want to have like a trailing affect following the people, like you can get with your cursor on some computers its like its lagging behind? Its hard to explain, I hope this made some sense.. any suggestions would be great thanks.
Since you are disolving two shots together (rather than compositing or keying) it seems like you will always have some slight noticeable opacity as you are effectively bleinding two shots together at 50% opacity each. There is no way to maintian 100% short of keying or compositing. However with the background being the same in both shots the opacity shift should be very minimal.
Although you might consider trying the built in trailing effect in the filters browser and see how it looks, it might achive the effect you are attempting better than blending the two shots. -
Youtube will not load videos beyond 2 seconds. How can this be fixed?
Try contacting YouTube's tech support and/or post in their forums.
Make sure you are using the latest version of Adobe Flash Player.
Is your RAM maxed out? Care to share which OS you are using? -
Videos and special effects... (?)
Okay I just found these.. they are great! But I was wondering... is anyone else having issues when filming either backlit or in the snow?
My vids are... as best described... "mucky" looking!
Is there not an option to increase the contrast or to 'vivid color' saturate the look?
Thanks...
===== and for those that do not know about the special effects: =====
Chapter 5 Using the Video Camera page:53
Recording Video with Special Effects
You can record video with a variety of special effects on iPod nano.
Note: Video effects can only be selected before recording. iPod nano can’t add effects
to or remove effects from recorded videos. You can’t change video effects settings
while recording.
To record video with special effects:
1 Choose Video Camera from the main menu.
2 Press and hold the Center button to display the video effects palette.
3 Use the Click Wheel to browse the effects, and press the Center button to select one.
The viewfinder screen appears with the selected effect.
4 Press the Center button again to start recording with video effects.
5 Press the Center button to stop recording.
If you exit the Video Camera screen to play back your video, video effects are turned
off. To resume recording with a video effect, repeat steps 2 through 4.Okay, why am I the only one who couldn't figure out how to get Special Effects with my video camera? The User Manual instructions: see pg 7, which is correct and pg 53-54 seem to be written incompletely; and (as I read them) indicate that with "Video Camera" on the screen, the center black button should be held down, thus providing the choices of Special Effects. WRONG. What does provide the array of Special Effects, is to select Video Camera (with the black center button), opening the lens of the camera. Before recording begins, hold the center black button down until the Special Effects are displayed, THEN select one and begin recording with it by quickly depressing the black center button. To end, again depress the black center button.
-
Problem with keyframe effect - at start and end (crop and scale)
I'm having this odd problem with keyframe effects.
Setup:
I have a gif image that I have on video 1 for say 2 minutes.
I have my real video on video 2. It is a person talking.
First I start with my video full size on top of video 1.
Though the motion and cropping keyframe management I slowly reduce the scale and crop my video image so that it is reduced to the lower left bottom of the screen, on top of the gif, which is now revealed.
My problem is at the start and end of the transition from full video to small box on lower left on top of my gif I often get 1-2 frames where the video goes blank and/or I get a bunch of random red bars on black background appearing on the video - Or I get the gif from video 1 without the video 2 at all (it disappears).
I've tried moving my start of end of the transition to skip the bad spots - but these new transition starts or ends not get their own bad spots in the same way. Its only a couple of frames but it's really unacceptable for the finished video.
Note, when I say transition here I don't mean real transition events, but rather the start of effects that are managed with keyframes. My move from start to end of the effect runs for about 4-6 seconds.
Any ideas?Bill,
Here is more detail and screen captures.
Concept:
I have 3 minutes of video. It contains a person making a speech. During parts of the speech I want to reveal a graphic image that will be discussed. The speech will begin with the speaker full screen. Half way in, the speaker will shrink down to 45% in the lower left corner of the screen. While the animation occurs (the shrink, move and cropping) it will reveal the graphic below. The graphic will take up the full screen with the speaker at 45%.
Technique:
I put the video in Video 2 and the graphic, a GIF image in Video 1. The scene begins with the speaker talking at full screen. After a minute, I animate the move of the speaker using Motion: Scale and Position and Effect: Crop changing Top, Bottom, Left and Right sides. The animation occurs over approximately 8 seconds.
I am manually adding keyframes at the start and end of the animation. I set the ending state of the video image in the end keyframes. The interpolation between these start and end keyframes should be managing the animation.
Problem:
At the beginning and end of the animation – usually 1-3 frames from the start and 1-3 frames from the end, where the change has barely begun or almost ended, I get these problems. On some frames, the video (in Video 2) completely disappears only showing the Video 1 GIF image below. On other frames, the video image turns black with horizontal red bands half way across.
Troublshooting:
I’ve tried deleting all start and end keyframes and moving the start and end earlier or later to see if I can fix this, but the problem continues to show up in these new locations.
I have added a few screen shots.
1:32:15 is the start of the animation change and 1:40:22 is the end of increasing from the mini video speaker to full size (on top of the GIF).
At 1:40:16 the video image completely disappears only showing the GIF below.
At 1:40:17 its back and slowly increases in size through the interpolation until it is full size at 1:40:22.
Let me know if you need anything else.
Thanks!
Evan -
I have Adobe Premiere Elements 4.0 and I want to end a video with the effect of it looking like it goes to a TV screen of static with that sound. Is there any possible way to do that???
My first thought would be to tape an analog TV tuned to a channel with no signal. Otherwise, you could probably pull the Ant. connection and tape that.
For the Audio, if you do not get what you want (I'd use the Audio Out on the TV to the Audio In on the camera), you might look for on-line SFX sites. Here are a few:
http://www.stevengotz.com/audio.htm
http://www.findsounds.com/ISAPI/search.dll
http://www.freesound.org/index.php
http://www.a1freesoundeffects.com/
http://www.ljudo.com/default.asp?lang=tEnglish&do=it
http://www.sounddogs.com/
http://www.soundsnap.com/
I'm also sure that there would be stock footage of the "static" on video, but think that your video camera would get exactly what you want, including the bezel, if needed.
Good luck,
Hunt -
How to export RTF with paragraph style names?
Anybody can help me "how to export RTF with paragraph style names?"
Thank youIt's not something that's natively done with Indesign.
However it's possible that it might be able to be scripted.
Check the scripting forum
http://forums.adobe.com/community/indesign/indesign_scripting -
Hi,
I have a movieclip which will be placed at random place (
when the flash movie is loaded ). Now when i click on the movie i
want the movie should move to center point with the effect of
scaling. But the issue is that it's not placed at center.
I had used tween to move the movie at center place.
Can anyone help me !!
Thanks In Advance.On movie click at to send the movie clip i had used the tween
as :
var centerX:Number = Stage.width/2 - this._width/2;
var centerY:Number = Stage.height/2 - this._height/2;
var centerxTween = new mx.transitions.Tween(this, "_x",
mx.transitions.easing.Regular.easeIn, this._x, centerX, 0.5, true);
var centeryTween = new mx.transitions.Tween(this, "_y",
mx.transitions.easing.Regular.easeIn, this._y, centerY, 0.5, true);
var xTween:Tween = new mx.transitions.Tween(this, "_xscale",
mx.transitions.easing.Regular.easeIn, this._xscale, this._xscale +
70, 30, false);
var yTween:Tween = new mx.transitions.Tween(this, "_yscale",
mx.transitions.easing.Regular.easeIn,this._yscale, this._yscale +
70, 30, false);
The movie clip registration point is "center". ( exactly i
was thinking on movieclip registration...)
Maybe you are looking for
-
How to make Text Input in Sales Order Trigger Change Event
Hi Gurus, I have a project going on where when a sales order is created, changed or cancelled, an IDoc is FTP to our freight company. Now the issues is when we change a sales order text input (for example, shipping note). Nothing happens. The system
-
ID CS6 shows low resolution on placed AI file.
I placed an AI, full vector, file into ID. Didn't see any problems until I ran preflight and it popped up with a low resolution warning. The vector is scaled down inside ID, but still shows a 90 ppi. I couldn't find any placed images in the AI file,
-
What it means iwl3945: Could not read microcode: -2 ?
My iwl3945 module work fine ( intel pro/wireless 3945abg ). I put it in /etc/rc.conf 1) MODULES=( ... iwl3945 ...) 2) wlan0="dhcp" INTERFACES=(lo wlan0 ...) and in /etc/conf.d/wireless 1) wlan_wlan0="wlan0 mode managed essid MariaTeresa channel 7 ap
-
Problem with Logical Database - Get stmt
Hi, There is a standard LDB which is used in custom developed report. GET A GET B When there is no record fetched from B table, it moves to end-of-selection and finishes the report execution. But in some cases I dont want this to happen. Only GET
-
Available characteristics and key figures in drilldown reports
Hi, I'm wondering which table /structure defines what characteristics and key figures are available for drilldown reports (eg. G/L), and if it is possible to add new chars/key figs. I reckon there must be a structure resembling Report Painter librari