Exported and later Imported .pst files retain the permissions from the original Mailbox.

After migrating from Exchange 2003 to 2010 something strange happens when exporting folders to a .pst file and importing them in another mailbox.
The acces right that are applied, are those from the original mailbox.
I have been searching on the internet about this strange behaviour, but it seems our organization is the only one where is applies.
Does anybody have any ideas what can be the cause?

Hi,
For example, userA was granted permissions to the Inbox folder of userB's mailbox. You exported userB's Inbox folder to PST file and then imported to userC's mailbox. After that, userA had permissions for Inbox folder in userC's mailbox as well. This is
what you had encountered, is it right?
Generally, permissions aren't preserved when you export folders to PST file, only the content itself is exported. I recommend you remove this mailbox folder permission using the Remove-MailboxFolderPermission command to check the result.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Similar Messages

Import PST files for multiple users at the same time?

While importing PST files into archive mailboxes, the Exchange 2010 mailbox server went to 100% CPU and memory usage and I could not stop the imports because the EMS stopped responding. We had to restart the whole server to get back to normal.
Not sure if importing PSTs was the cause of it it was a coincidence. We have done imports the same way before without this issue.
How many PST imports can be done at the same time and how do we queue up multiple users and have the mailbox imports have unique names for each user? I noticed they are always called MailboxImport and MailboxImport1 and then it starts over as MailboxImport
again for additional users. So, if more than one user's PSTs are being imported at the same time, we will have multiple identically named imports running.
We would like multiple users' PST imports to queue up and start automatically when the previous users' imports complete.

Please try like this. Rename folder name same as alias. i.e. \\server\share\<alias>. below are examples.
"\\server\share\jsmith"
"\\server\share\tjones"
"\\server\share\rsmith"
"\\server\share\bspears"
"\\server\share\mmouse"
And run below command to take PST from the corresponding
foreach ($i in (Get-Mailbox)) { New-MailboxImportRequest -Mailbox $i -FilePath "\\Server\share\$($i.Alias)\$($i.Alias).pst" -baditemlimit 50 -acceptlargedataloss ;while ((Get-MailboxImportRequest -mailbox $i | ? {$_.Status -eq "Queued" -or $_.Status -eq "InProgress"})) { sleep 180 } }
If a folder missing with the alias you will see an error similar to this.I think this will work for you. You just keep only the required PST folders to import in the "\\Server\share" folder.
"Unable to open PST file '\\server\share\mmouse\mmouse.pst'.
Error details: Could
not find a part of the path '\\server\share\mmouse\mmouse.pst'.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MailboxImportRequest], RemotePermanentException
+ FullyQualifiedErrorId : 27802833,Microsoft.Exchange.Management.RecipientTasks.NewMailboxImportRequest"
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

How can I import eex files into Applications EUL from the unix command line

How can I import *.eex and *.dis files into an Applications EUL from the unix command line?
Thanks

Hi
The simple answer is you either have to use the client tool DIS51ADM to import files using the command line (Discoverer Admin is a windows only client tool), or the Java command line which needs a browser.
In theory if you have a browser running on your Unix box you may be able to use the Java command line to make this work.
Best wishes
Michael

Question about Removing Permissions from the System Folder with chmod

Hi
I have a question about the removal of permissions from the System folder (and sub directories and files).
Background
Since installing a new HD, clean install of 10.6, application of updates and moving over backed up user directories I have had several issues with permissions.
I have read several threads on this and using disk warrior and other tools I have been able to fix most of the issues.
The Problem
The issue that remains is a permissions check using Disk Utility keeps reporting
ACL found but not expected on "System".
followed by an extensive list of sub directories and all.
Attempts to repair take hours and the same errors are reported.
Found Solutions
I have read about changing and/or completely removing the ACL from the permissions from the System using two different commands:
sudo chmod -R -N ./System/* ( to remove all ACLs)
or
sudo chmod -R -E ./System/* ( to replace all ACLs )
My Question is ( to the UNIX gurus):
What is the difference between the usage with -E and -R and which is the best approach for a Systems directory and (subordinates)?
Many thanks!!

OK
So I misread on the your instructions about the PW reset, did it, no harm in that. I did also select the options to reset all the permissions for all the accounts and the ACL issues were not resolved. My bad, I forgot to note that.
You do suggest getting and expert opinion but alas these are rather elusive. In most cases the Apple solutions is to do a complete reinstall... I have found that unless you completely wipe a drive and rebuild everything there are often artifacts left behind. Since I have full and redundant back-ups I would rather explore and hack a little instead of a dull old system reinstall. The irony is the system issue I had was it was the result a reinstall and combo update on a new drive. I recognize the risks of entering the realms of the System folders but I am willing to explore knowing full well that I have a path to recovery.
Thanks again for your insights. I come to the forums looking for insights and ideas but not a lecture...

I write both JPG and DNG files in the camera.   Camera is a Leica Monochrom.   Photo, unlike iPhoto, seems to ignore DNG files and only imports JPG files.   What am I missing here?

I write both JPG and DNG files in the camera.   Camera is a Leica Monochrom.   Photo, unlike iPhoto, seems to ignore DNG files and only imports JPG files when both are present on the SD card. JPGs are used for quick proofing on an iPad.    DNG RAW files are edited on a Mac Pro (2013).    Other than deleting the JPGs before importing images from the SD card, is there any way to force Photo to select and import only the DNG images?

Thanks Larry,
I did see the J stacked in the lower left of the thumbnails but couldn't figure out how to get to whatever is below it.   How do you select R?
I use an iPad to do quick proofs of my images.   A JPG is good enough for a proof ( dust on the lens, composition, blown out image, etc. ).   The iPad is JPG friendly and can load the images quickly.    Serious editing takes place on my Mac Pro with the DNG files.   I use the same workflow with the the Leica M 240.   iPhoto has been a quick and easy importer to the Mac capturing all of the metadata in the EXIF sidecar file ( location, date, time, camera settings, lens type). A quick scan in iPhoto for the "keepers" let's me export those worth editing to Lightroom/Bridge/Photoshop. I typically shoot 50 images from three locations in a normal day. If I'm lucky I'll get 1 worth real work to add to the portfolio.

Dear Team, Can we secure "sent msg" that the receiver cannot edit while forwarding/replying? Is possible to import .PST file(S) into thunderbird?

Dear Team,
Can we secure “sent msg” that the receiver cannot edit while forwarding/replying?
Is possible to import .PST file(S) into thunderbird? If yes, any size limit?
Can we convert thunderbird data file in .PST?

I don't think you can prevent email body text from being copied and edited.
You'd probably need to created a protected Word or PDF document, and send it as an attachment.
This is still some sort of guessing because it's still not clear to me what exactly your scenario is.
Whatever text you send in an email, regardless of whether in the body or as an attachment, the recipient will always be able to use that and distribute it further, e.g. by making a screenshot. And images can be 'photoshoped' as well.
If you want the recipient to be able to detect whether a message or an attachment has been altered on transit, you'd need to sign it.

I have my camera (Canon 5D MARK 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put ab

I have my camera (Canon 5D Mark 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put about 700 images in an untitled project folder, but all the images are the JPEGs. What am I missing?
Thanks,
upsjdris

Have you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
You can set Aperture to import raw, jpeg, or raw&jpeg.
If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
Photos > Use Raw as original.
Regards
Léonie

How to Import .pst files in Mac mail?

I am finding a solution to import .pst files in Mac mail.
In other and simpler words, I am tryng to transfer emails from ms outlook 2007 that supports .pst files to mac mail of mac operating system.
Also it will very helpful if I can get solution for transferring contacts and calender work along with the above asked question.
Eagerly waiting for the solutions.
Thanks

do it with the help of import-export wizard. Here goes the steps for youhttp://www.trickyways.com/2010/08/how-to-transfer-emails-from-outlook-to-apple-m
ail/
Your best move would be if you search for your problem on some search engine
that you use.
Typing "Convert
Pst To Mac Mail" will land you in several solution.
Or you can simply visit apple online store for this problem have a look:
https://itunes.apple.com/in/app/pst-con
... 1009?mt=12
Hope this helps

PST Capture error when trying to import .PST files

I am currently migrating mailboxes from Exchange 2010 to Exchange 2013 on prem. I have installed PST Capture 2.0 and 64-bit Outlook 2013 on a Windows 2008 R2 machine and have installed the PST Capture 2.0 agent on a workstation that has some .pst files
on it. PST Capture finds all the .pst files on the workstation, but when I use PST Capture to try to import PST files into a mailbox on Exchange 2013, I get the error "Import error: Error opening mailbox [email protected]".
I created a userID with a mailbox to run PST Capture. Based on the instructions at
https://technet.microsoft.com/en-us/library/hh781035%28v=exchg.141%29.aspx I have made that user a member of the groups that are assigned the Public Folder Management role, the Mailbox Import Export role and the Organizational Management role. The
user is also a local admin on the machine running the PST Capture console. While the error sounds like a permissions issue, these are the only permissions I could find documented for PST Capture. I am starting PST Capture with "Run as administrator"
Any ideas why this isn't working? Are there any other permissions that the PST Capture user needs? Is there anything else I need to do?
Thank you very much for your help.

Generally PST capture tool allows you to search for PST files & import these PST files
to the mailboxes but as your account is not getting connected, so you need to check settings of your PST Capture tool :
https://technet.microsoft.com/en-us/library/hh781032(v=exchg.141).aspx
If this solution does not work out for you, then I would advise you to use any professional
tool for exchange migration like CodeTwo , Stellar. From my personal experience, I would recommend you to go for Stellar Mailbox Extractor for Exchange Server as it migrated my mailboxes to another Exchange Server in quick time.

I am having trouble keeping the quality of my video when exporting to my external drive. I change the kind to "original" but when I view the video from the external drive once exported, the sound and picture are distorted.

I am having trouble keeping the quality of my video when exporting to my external hard drive. I have tried to export from iphoto with changing kind to "original" but when I open the video from the external drive the quality is effected. I have also tried copying the video to my desktop and then dragging and dropping onto the drive...same problem. Any suggestions? I would like to save everything to my external drive so that I can delete all of iphoto library and then reimport to correct a few things.

The file sizes are identical. In the finder I did a search for all .mov files. Then when they came up, I went through them and named each one so that they would be easier to find. I am a new mac user and am used to windows. I realized later that I should not have done this....with a mac files should be named within iphoto app...not finder....When I went to open the videos in iphoto, it wouldn't allow me. I had to go into finder, copy to desktop and reimport into iphoto. Then the videos worked again. However, I had the problem with the poor video quality when copied to external drive before that. Actually the first problem I had was when I copied to ext drive...videos were copying as an image...so I learned that you have to change "kind" to original before exporting....then that problem was solved...now they are videos, not images but not of a great quality. Skips, sound and images are not in sync...etc...

Import multiple PST files for a single user into archive mailbox is failing

Most of our users that have PST files have between 2 and 10 separate PST files named by either subject or year.
I am trying to find a way to automate using New-MailboxImportRequest to import ALL of the psts found within a user's shared folder.
I found a script that others says should work, but it doesn't work for me.
One of the problems is that that the commands are spread over several lines. I have tried entering it line by line but it still errors out.
First, how can I run a multi-line command?
Second, can anyone see an error in the script below?
I do change the server name, share name and mailbox alias to the actual values before running.
I am trying the script below and it fails:
$filepath=”\\server\usersfileshare”
$items=get-childitem -path $filepath -filter *.pst
foreach($item in $items)
{$location=$filepath+”\”+$item.Name
New-MailboxImportRequest -mailbox mailboxalias -isarchive -filepath $location}
The error says:
Unexpected token 'items' in expression or statement.
At line:1 char:51
+ $filepath="\\servername\usersfileshare" $items <<<< =get-childitem -path $filepath -filter *.pst foreach ($item i
n $items) {$location=$filepath+"\"+$item.Name New-MailboxImportRequest -mailbox mailboxalias -isarchive -filepath $location
+ CategoryInfo : ParserError: (items:String) [], ParentContainsErrorRecordException
+ FullyQualifiedErrorId : UnexpectedToken

You can have check this
thread which has been discussed earlier with similar concern.
Here is another helpful
Blog reference. Please check this.
Moreover, you can have also check this
automated option which would be very helpful in terms of importing PST files into live exchange mailboxes.

Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the ST card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the SD card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

Check your Import settings in the Import Panel, i.e. all that might exclude the image type you want to import:
If you did not exclude any file types, and still Aperture will not import, remove your ImageCapture preferences fro your user library:
To remove the image capture preferences:
If Aperture is running, quit Aperture, and log off and on again.
Open your user library from the Finder's Go menu: Hit Command Shift G (⌘⇧G) and then type in: ~/Library/Preferences/ then hit return.
In the window that opens remove "com.apple.ImageCapture.plist"
and look into the subfolder "ByHost": if there are files named com.apple.ImageCapture something .plist remove them too.
then try again.
And if that still does not help, remove the Aperture preferences as well:
~/Library/Preferences/aperture.plist
Regards
Léonie
P.S. in MacOS Lion and later the user library ~/Library is hidden by default.
You can reveal it also from the Finder's "Go" menu:
Finder > Go, then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences".

Export a mail as PST file using EWS API

Hi,
I need to export the Exchange mails to PST file without installing the outlook. To acheive this i am choosing the EWS API. but i dont know how to do that. So, now i have a two questions, the first one, is it possible to create the pst file using EWS API?.
If yes, how to create a pst file using EWS, if any one posted the sample code here, it is very helpful for me.
Thanks,
RamMohan

EWS is not going to help you do what your trying to do, EWS is an Exchange API so you need to have an Exchange 2007 server or greater with the MailStore mounted to even use it to access the Mailbox . EWS also doesn't support exporting email to a PST because
the PST file is an Office file format so in the case where you do manage to mount the database on Exchange then use Adam's suggestion or just connect via Outlook and export the Mailbox.
>> I am parsing the mails from the exchange EDB files
With what ? reading the contents of an EDB file directly is not supported although there are a few third party apps that can do it and if your using one of those apps then all of them I've seen support the export to PST (unless your using a Trial licence).
The correct method of recovering data from an EDB file would be to use a Recovery Database
https://technet.microsoft.com/en-us/library/dd876954(v=exchg.150).aspx even if you don't have access to the environment you should be able to setup a temp environment using Virtual machines and recover it that way.
Cheers
Glen

I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD It does not shoe in p[layback on the computer. I understand there isd some file I need to delete and reboot the imovie to co

I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD. The digital breakup does not show in playback on the computer. I understand there is a file I need to delete and reboot the computer and imovie will rebuild the file in the program. Help!

My method is to use the DAW in standard recording mode, and set up the camcorder entirely separately. After recording, I automate the audio mix with fader moves and effects, then export ("bounce to disk") a full-fidelity AIFF, 16-bit 48 kHz stereo file (most videos use 48, not 44.1). I use iMovie '11 to import the video from the camera, then import the stereo audio file and match it up to the camera audio by dragging it into the iMovie Project. Make the waveforms visible, it's not too hard to align.
Then, use iMovie's "Export as Quicktime" feature. Here, by going through the menus and options, you can control the audio compression (for example, 256k instead of 128, although 128 seems to be enough for YouTube).
AppleMan1958 posted a YouTube video about controlling iMovie's export options that may help:
http://www.youtube.com/watch?feature=player_embedded&v=vJg-909lx2s#!

Hi, I'm new to Labview...How do I export Data to a spreadsheet from an agilent 8510c using labview 6 and the VI from the NI site?

Hi, I'm trying to export data to a spreadsheet from an Agilent 8510c to a laptop(Win XP) using a PCMCIA-GPIB card, Labview 6 and the VI from the NI site. How do I do this? Ideally I'd like the Magnitude and Phase Data, as pairs for each frequency point, but the Real and Imaginary pairs can work just as well. Any help would be greatly appreciated.

When you say the "VI from the NI site", I'm going to assume that you mean the HP8510C driver. If that's the case, then VI called HP8510C Application Example should be your starting point. It returns two 1D arrays - real raw data and imaginary raw data. These can be combined with a Build Array function and the resulting 2D array can be wired to the Write to Spreadsheet File function. This will create a tab or comma separated file that Excel or any other spreadsheet program can import. The very simplest program would look something like the attached picture. You may need to modify the instrument program to suit your requirements but this should get you started.
Attachments:
HP8510C_and_Spreadsheet_Write.jpg ‏5 KB

Exported and later Imported .pst files retain the permissions from the original Mailbox.

Similar Messages

Maybe you are looking for