Exporting an EDL from Premiere CS6 that SpeedGrade can read

I have a long sequence which I now want to grade. I didn't grade the individual clips prior to editing them into a 70 minute timeline. I have tried the following without success:
Exporting to SpeedGrade the Premiere timeline: it will do this, but leaves chunks of clips brown, as blank info in the SG timeline, so if I grade this, I'll have an incomplete graded file to apply back to the Premiere timeline;
importing to SpeedGrade a ProRes 422 file which I then asked SG to divide into clips (the app quit after taking 40 minutes to examine the file, which it did successfully, but when I asked it to make clips, it quit)
exporting from Premiere an EDL which I then apply to the QT ProRes file in SG. This is not accepted because there are certain key commands which SG won't accept, but there's no way to know how to export a "clean" EDL from PP to SG without those commands (I even went into the EDL using TextEdit to see if I could delete certain lines, but that was obviously a losing game)
Suggestions welcome!

Yes, I tried to find that forum and couldn't which is why I posted here, but since I have you on the line, and since you apparently have lots of experience with SG, can I ask you:
Because of the way I've done this documentary I can only grade it now that the picture/sound is locked. If I export a ProRes flattened movie into SG, it will have the effects, titles etc which is not what SG wants, right? So do I duplicate a timeline in Premiere, delete the titles, etc, (what else: effects?) and then export to SG?
If I export the timeline (using a MacPro but not the fastest newest model, 16GB Ram) it takes about three or four hours to export the DPX files. I'm trying it again, but don't hold any hope that it will export without some of those incomplete clips. I don't know what causes them. Could it be sections with effects, with stacked clips which have wipes and other stuff, combining them in the ProRes export to a single image but in a timeline exported to SG maybe its not reading that info?
Whatever you can suggest would be great.

Similar Messages

  • Speedgrade frame rate issue when loading reels. EDL from Premiere CS6

    We have a short film, cut in Premiere (time base in sequence is set to 23.976 and display format is set at 24fps) I imported the EDL into Speedgrade for coloring. My Speedgrade edit settings have a base frame rate of 24fps and the option "both edits have current base frame rate as set above or within the EDL itself" is selected. However when I go to load reels from desktop I am getting an error that says "some of the reels do not match your current frame rate." In turn this is causing our exported Quicktime (TIFF uncompressed at 24fps) to not sync up with our audio back in premiere. It looks as if we are missing frames.
    Is this an EDL issue with Premiere? Or is it a Speedgrade frame rate settings issue? Any feedback is greatly appreciated!
    Some details on the project:
    Shot at 4K on Red Scarlet, at 24fps.  Edited in Premiere CS6.
    Premiere Settings:
    Editing Mode: Custom
    Timebase: 23.976 frames/second
    Display Format: 24fps Timecode
    Speedgrade Settings:
    Timeline FPS: 24fps

    aaronfronk wrote:
    Shot at 4K on Red Scarlet, at 24fps.  Edited in Premiere CS6.
    Premiere Settings:
    Editing Mode: Custom
    Timebase: 23.976 frames/second
    Display Format: 24fps Timecode
    Speedgrade Settings:
    Timeline FPS: 24fps
    I don't have had problems if the frame ratio is the same in all process, and in this case it isn't. If the Scarlet footage is to 24 fps, why to use 23.976 in Premiere?

  • Only seeing Audio File in AME on Import or Export to Queue from Premiere

    Hello All...
    I don't have alot of experience with AME... I"ve exported a sequence from Premiere Pro, Selected setting and added to the Queue in AME... all I see show up once the AME window opens is an Audio File.
    When I open a Premiere project directly from AME (using the dropdown menu) I get the same result... I've tried this with a few Premiere Projects. Am I missing a step here???
    Also... I'm confused as to why I select all the transcode settings in Premiere Pro when exporting media... and then there are presets again in AME... don't the settings carry over from Premiere's export window?
    Thyanks for any help...

    I'm wrestling with this same issue.
    I'm on Windows 7using Adobe Premiere Pro CS6.
    I'm producing a two disc, dual layer DVD set for 100 families of my son's marching band.
    I have a half hour "masterwork" of interviews, performance segments, rehearsal sequences, credits, etc that I've edited together complete with sound, etc.
    I also then have various other video segments from the season, some high quality (1920x1080) and some lower quality.
    Rather than import everything into Encore and have Encore transcode them all at the same quality, I wanted to ensure that the half-hour piece and certain other segments were transcoded as high quality as possible and given the largest file sizes I could and then transcode other segments as needed so everything would fit on the discs.
    The company I'm using to duplicate/replicate the 100 DVDs from my Master DVD advised me to encode them FIRST in Premiere Pro as desired, and THEN import those files into Encore.
    I've used Adobe Media Encoder a lot to export the individual segments into files I could upload to Youtube and have had no problem.
    But now, two things happen:
    1) AME automatically designates the "Output File" with an .aac extension
    2) When I do an "Import As" of the AME encoded file in Encore it only loads an audio file (obviously)
    Whassup?
    Here are the settings I use in my Export Media dialogue in Premiere Pro CS6:
    Format: MPEG2-DVD
    Preset: NTSC Widescreen High Quality
    Output Name (and filetype): ______ name with Save as Type of "Video Files(*.mpg)
    BOTH the "Export Video" and "Export Audio" boxes are checked
    Filters Tab: left as is, don't do anything here
    Multiplexer Tab:
    choose the "DVD" button (vs the "None" button)
    Bitrate Type: left as Variable which is what is selected as a default
    Video Tab:
    Codec: Reads MainConcept MPEG Video
    Quality: increase it to the max of 5
    TV Standard: NTSC
    Frame Rate: 29.97
    Field Order: None (Progressive)
    Pixel Aspect Ration: Widescreen 16:9
    Render at Maximum Depth box checked
    Bitrate Encoding: I choose CBR for my high quality segments and VBR 2-pass for my lower quality segments
    Bitrate: kick it up to the max for high qulaity segments, adjust as needed to get the filesize I want for my lower quality segments
    Audio Tab:
    Audio Format: Dolby Digital
    Codec: Dolby Digital
    Bitrate: At least 320, sometimes higher for the segments I want to be the highest quality
    I check the "Use Maximum Render Quality" box
    I chose "Queue" for everything and then let it run overnight
    So... what am I doing wrong, helpful experts????

  • I am new to EPUB fomat and I am facing a lot of difficulties in exporting my work from InDesign CS6

    Hi..I am new to EPUB fomat and I am facing a lot of difficulties in exporting my work from InDesign CS6. The problem is that I have got a financial report of about 100pages to export as EPUB, with lots of graphs etc..and when I export it, to EPUB 2.0, the following happens:
    1. The image quality is quite low (even if the original images are of high quality, and during export, i put the image to max quality)
    2. The graphs do not appear where they should be! All the imags in fact appear after the long paragraphs of text..meaning everything appear quite messy and in an unordered manner.
    I have read that images should be anchored, and doing so, the result is quite better, but still, some images appear at the end of the text!!d
    That is, the end result, in terms of pagination and graphics, is no way like it should have been, compared to the indesign file (page 5 is displayed after page 10, image on page 4 appears on page 9 etc..)
    PLEASE HELP..
    P.S :
    I am using Adobe digital edition to view my EPUB..I have also tried CALIBRE and SIGIL!! But I am not too sharp in eiting CSS codes etc...

    Hi Akshay,
    If you want your images to appear standalone with no other page item on the page, then you can insert Page break on an image.
    This is how you can specify a page break:
    1. Select the image
    2. Goto Object->Object Export Options
    3. Select EPUB and HTML tab
    4. Select Custom Layout check box and then check Insert Page break. You can select from the option in the dropdown-Before Image, After Image, Before and After Image as per your requirement.
    Regarding your question about images:
    You export your graphs as JPEG but are those JPEGs of good resolution? If they are, then InDesign is doing something wrong during export but if the JPEGs are not of good quality then it is not an export issue. Please provide some more details here.
    Regards,
    Pooja

  • Direct link from Premiere Pro to Speedgrade won't open and stops at the post processing bar.

    I've just installed the new version of Speedgrade and every time I try to open a direct link from Premiere Pro to Speedgrade, it opens and starts to load, but when the post processing bar appears it stops there and doesn't open, I've gone back to the original versions of both programmes and that same thing happens, HLEP!

    Hi Vinay,
    1. I am using third party plug ins, and I understand that might be causing an issue, but I've also tried opening a new project with nothing in it at all, and that won't open.
    2. Premiere Pro quits after the project loading bar or after I create a new project.
    3. I used a lot of files! mov, mts, psd, ai, png, jpeg, and AE compositions through dynamic link.
    4. The project has about five sequences. They range from 1 minute to 4 minutes.
    Thanks!

  • I am having trouble exporting closed captions from premiere cc 2014.

    I am having trouble exporting closed captions from premiere cc 2014. I see them in the program monitor but after i export and try to playback in either quicktime or VLC i get to embedded captions. I eve tried the side car file and embedded with compressor and still nothing. Any help would be appreciated.
    I only used compressor because i switched from final cut to adobe. easy fellas!

    I have latest QT version, do i need to go back to 7? I have tried VLC also, i usually use that to check CC in mpeg files. I am exporting a QT H.264 for just testing purposes, I need a prores HQ, also this is SD so my sequences are set to 720x486.

  • Export to Encore from Premiere - Set DVD Title?

    I am new to Encore.
    I tried to Export to Encore from Premiere. The DVD turns out fine, but the DVD is named "Untitled Project" and I'd like to give the disc a custom title.
    I saved the Encore project, gave the disc a title, and the titling works out fine, but the DVD has no sound.
    I have tried both of these processes two times each, and the same thing happens.
    Given the choice between a custom title and sound, I certainly want the disc to have sound. But how do I get both?
    Help help help.

    Thank you for your reply.
    I used a short disc title in Encore, which was PANDORA. The titles winds up on the DVD, but no sound.
    But when I export the video from Premiere to Encore, I don't see a place where I can enter a custom name. So it names the DVD Untitled Project. Can you tell me where that is in Premiere?

  • Sending clips straight from premiere cs6 into photoshop cs6?

    I was wondering if it's possible to send specific clips in my timeline directly from Premiere CS6 into Photshop so I can do color correction/color grading and then export the clips straight back into Premiere?

    Here are some examples how to use Photoshop for video.
    http://tv.adobe.com/watch/short-and-suite/using-video-in-photoshop-cs4/
    http://tv.adobe.com/watch/photoshop-for-video/secondary-color-correction-with-curves/

  • Having trouble exporting to pdf from InDesign CS6

    When I attempt to export to pdf from InDesign CS6, the application crashes. Apparently there is some phantom plug-in issue.
    I need to get this resolved asap.
    Thank you,
    Marissa

    Have a look at this generic document to help you troubleshoot: http://helpx.adobe.com/indesign/kb/troubleshoot-printing-pdf-export-indesign.html
    Could you also provide details about what you've tried, and what errors you encountered? Is this problem limited to a particular document, or all documents?

  • How come I can't export a image from lightroom 3 that is 600w x 610h?

    How come I can't export a image from lightroom 3 that is 600w x 610h?

    I think thats what I'm doing.  No luck though. Maybe its a bug?

  • I'm having this message when I try to export my video from Premiere Pro:  "Error compiling movie. Unknown error"

    I'm having this message when i try to export my video from Premiere Pro:
    "Error compiling movie. Unknown error" Do anybody knows what to do?

    1st, I moved your message to the correct forum
    2nd, More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    3rd, Error Compiling Movie... some past discussions and ideas
    -http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html
    -http://helpx.adobe.com/premiere-elements/kb/error-error-compiling-movie-render.html
    -and nested sequences http://forums.adobe.com/thread/955172
    -and WMV files frame rate http://forums.adobe.com/message/4629210

  • I would like to know the list of possible output (export) file codec from FCP X. For example, can I export  in F4V or FLV format?

    I would like to know the list of possible output (export) file codec from FCP X.  For example, can I export  in FLV format?  Where do I find the list, which gives me all the details about it?  Or is there only one output codec? Thanks

    That's an excellent analogy. While FCP cannot export FLV. It is possible to do a very simple substitution. If you export a QuickTime movie using the .mov suffix with the H.264 codec, you can change it to FLV simply by changing the suffix to .flv. This is an acceptable format for Flash movies on most web sites, if that's where you're trying to go.

  • I received an email supposedly from Best Western that I can't delete - says it's a 159860.emlx file - how do I delete it?

    I received an email supposedly from Best Western that I can't delete - says it's a 159860.emlx file - how do I delete it?

    Do a backup.
    Take notes of all account information or take screen shots. You may need to set the accounts up again. Quit Mail.
    Copy the line below.
    ~/Library/Mail/V2
    Select Go/Go To Folder from the Finder menu bar. Paste the line into the window. You won't see it.
    That should show you the accounts. Select the appropriate inbox and dig around in the folders until you find the e-mail matching the number. Try to delete/move to the trash. If successful, launch Mail and test.
    If you prefer to make your user library permanently visible, use the Terminal command found below.
    Show User Library Directory in Mac OS X 10.7 Lion & 10.8 Mountain Lion
    You might want to bookmark the command. I had to use it again after every update. I have also been informed that if you drag the user library to Finder it will remain visible.

  • I ask the third time: How can I enlarge the menue symbols and the text of the menue in Photoshop CS6 vers.13 so that I can read them??? My laptop has Win 8.1 and a screen resolution of 3840x2160

    I ask the third time:
    How can I enlarge the menue symbols and the text of the menue in Photoshop CS6 vers.13 so that I can read them??? My laptop has Win 8.1 and a screen resolution of 3840x2160.
    It is unbelievable that such an expensive software does not provide a proper lay out wit a high screen resolution!
    It is also unbelivable that it is not possible to get a qualified employee of ADOBE on the phone in Germany.
    hope of feed back: e-mail: [email protected]

    Chris Cox answered your question here:
    I have PS cs6 extended and a new laptop with screen resolution of 3840x2160. Now all control elements and menues are so small that I can not reed them. How can I make them readable without reducing the resolution of the schreen?

  • I cannot access all of the gmail messages from my Ipad that I can from my laptop.  What gives?

    I cannot access all of my gmail messages from my Ipad that I can from my laptop.  I have a folder with 27 messages in it, but when I access that folder on my Ipad, only one message shows.

    Barbr6322 wrote:
    How do I set as iMap?
    How is it set now?

Maybe you are looking for