Exporting and Importing Virtual servers with Windows 2012 R2 Hyper V

Hi
We are looking for various options / best practice in exporting and importing VSs between Windows 2012 R2 servers. Live migration we tested between servers in same VLAN and it's fine, but some servers are in different VLAN and hardware firewall is there
in between. So we exported the VS and while importing it, there is no option to export each Virtual disk to separate partitions / LUNs. Is it fine to create a new VS in the new server and just copy the VDs from the other HV host server, or exporting and importing
is the only proper method?
Thanks in advance
LMS

Hi Laljeev,
Please allow me to state my understanding of the two methods :
1.when you want to copy vhd you may need to shutdown the VM , further more if there is some snapshots I think it will be a trouble .
2. "export" you still need to shutdown VM but it doesn't have the trouble with snapshots .
The other way I will use is , "move" all of the VM's data to external disk then import it into destination hyper-v server (it can decrease the off-line time of VMs).
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Elton, in Windows Server 2012 R2, we do not need to show down the VM to export it via the Hyper-V Manager GUI or Powershell...
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

Similar Messages

OS-Deployment to virtual servers with SCVMM 2012 R2 vs SCCM 2012 R2 or integration with both?

Hi,
OS-Deployment to virtual servers with SCVMM 2012 R2 vs SCCM 2012 R2 or integration with both?
Is SCCM just for physical servers, and SCVMM for virtual?
What are benefits of integrating them?
/SaiTech

Hi,
Please refer to the links below:
Introduction to Configuration Manager
http://technet.microsoft.com/en-us/library/gg682140.aspx
Virtual Machine Manager
http://technet.microsoft.com/en-us/library/gg610610.aspx
The System Center 2012 Integration Guide provides information about automating each of the System Center components and integrating them with each other and with other systems and applications.
For more information, see the
System Center 2012 Integration Guide.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Export and import table data with Java

I need a library for simple exporting and importing table data.
The data should be exported to a SQL file with insert statements.
I just want to tell the library the table name, the connection and where to store the file. The usage should be very simple.
Are there any small libraries for this? Finished calsses and methods which I can just call?

I need a library for simple exporting and importing
table data.
The data should be exported to a SQL file with insert
statements.Every database has utilities to export/import data from tables. Take a look at your database manual.

Export and Import of Users with ABAP datasource to target standalone EP.

Hi Friends,
My customer is having
Source System:BS2
ABAP+ JAVA --- usage type : BW, EP
datasource -- ABAP
now, they need datasource as LDAP
so i have suggested as attached SOW
1.Install New Instance BS3 with JAVA,EP,EP Core
2.Patching BS3 to SP15 level
3.Import PCD from BS2 to BS3
4.Configure SSO between BS2 and BS3
5.Configure Data source to LDAP
6.Testing the Configurations
7. Uninstall JAVA DATABASE from BS2
Target System:
Standalone JAVA-- only EP
datasource -- LDAP configured
I have completed all steps successfully from 1 to 5
In source system, 45 users are there with ABAP datasource and ABAP roles... Now how can i import those users with ABAP roles into target System ( Standalone EP)
Any Usermapping is required to configure.
Please suggest me to workaround on this.
Regards,
Venkat.

You have to do this manually. In theory you can make a specially formatted text file to create the users and assign their portal groups, but it is quicker to just add them using the useradmin tool. If you export a user from the Java useradmin tool you can see the format of the text file. I ahve written an ABAP in the past to do the text file creation, but I can't find it now

Exporting and Importing the schema with AQ capability

Hi,
We have a production DB which is using Advance queuing and this whole queuing is working fine in Prod but now we have a problem in test Env and it seems that somebody has already tampered the test DB. (the queue reads and sends the messages to DB2)
So i wanted to export the prod schema and import it to the test schema that we have.
i wanted to make sure that if i import it to test db , it doesn't send the messages to the prod DB2 database!!
now it should send the messages to the test DB2 database.
How can i see where it sends the messages after i imported it ? how can i change it?
i'm not sure if i have explained my problem in a correct way and if you have understood my question. Please send me messages and i can explain more about it.

Hi Adhappan
I have tried importing without success. The import is not consistent. The same schema creates different sets of tables & fields each time. Sometimes if you reimport some more tables which were not set up the first time gets selected for import.
I did a simple exercise to test the import / export functionality.
1. I unarchived a repository from standard content provided by SAP
2. I exported the schema
3. I tried importing the schema without any modifications to schema
4. The results were highly inconsistent.
Arvind
Pls reward useful answers

Exporting and importing form data with out user intervention

Hi
A sample for this is posted on
http://eslifeline.files.wordpress.com/2008/06/importing-and-exporting-data-from-pdf.pdf

Hi Steffen,
You should go to user manegment and there you should export you'll have to copy the text file it will create than paste it in the import of the other portal it should copy the users and the groups.
hope it helps,
Yoav

Best practices for setting up virtual servers on Windows Server 2012 R2

I am creating a Web server from scratch with Windows Server 2012 R2. I expect to have a host server, and then 3 virtual servers...one that runs all of the web apps as a web server, another as a Database Server, and then on for session state. I
expect to use Windows Server 2012 R2 for the Web Server and Database Server, but Windows 7 for the session state.
I have an SATA2 Intel SROMBSASMR RAID card with battery back up that I am attaching a small SSD drive that I expect to use for the session state, and an IBM Server RAID M1015 SATA3 card that I am running Intel 520 Series SSD's that I expect to
use for Web server and Database server.
I have some questions. I am considering using the internal USB with a flash drive to boot the Host off of, and then using two small SSD's in a Raid 0 for the Web server (theory being that if something goes wrong, session state is on a different drive), and
then 2 more for the Database server in a RAID 1 configuration.
please feel free to poke holes in this and tell me of a better way to do it.
I am assuming that having the host running on a slow USB drive that is internal has no effect on the virtual servers after it is booted up, and the virtual servers are booted up?
DCSSR

I am creating a Web server from scratch with Windows Server 2012 R2. I expect to have a host server, and then 3 virtual servers...one that runs all of the web apps as a web server, another as a Database Server, and then on for session state. I
expect to use Windows Server 2012 R2 for the Web Server and Database Server, but Windows 7 for the session state.
I have an SATA2 Intel SROMBSASMR RAID card with battery back up that I am attaching a small SSD drive that I expect to use for the session state, and an IBM Server RAID M1015 SATA3 card that I am running Intel 520 Series SSD's that I expect to
use for Web server and Database server.
I have some questions. I am considering using the internal USB with a flash drive to boot the Host off of, and then using two small SSD's in a Raid 0 for the Web server (theory being that if something goes wrong, session state is on a different drive), and
then 2 more for the Database server in a RAID 1 configuration.
please feel free to poke holes in this and tell me of a better way to do it.
I am assuming that having the host running on a slow USB drive that is internal has no effect on the virtual servers after it is booted up, and the virtual servers are booted up?
There are two issues about RAID0:
1) It's not as fast as people think. So with a general purpose file system like NTFS or ReFS (choice for Windows is limited) you're not going to have any great benefits as there are very low chances whole RAID stripe would be updated @ the same time (I/Os
need to touch all SSDs in a set so 256KB+ in a real life). Web server workload is quite far away from sequential reads or writes so RAID0 is not going to shine here. Log-structures file system (or at least some FS with logging capabilities, think about ZFS
and ZIL enabled) *will* benefit from SSDs in RAID0 properly assigned.
2) RAID0 is dangerous. One lost SSD would render whole RAID set useless. So unless you build a network RAID1-over-RAID0 (mirror RAID sets between multiple hosts with a virtual SAN like or synchronous replication solutions) - you'll be sitting on a time bomb.
Not good :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

WSUS - Server 2012 R2 - Export and Import

Greetings,
I have a Server 2012 R2 system with the WSUS role installed. This server resides on a disconnected network so we must bring updates from an online WSUS server. I have experience performing successful exports and imports in the past with Server 2008
R2 and WSUS 3.0 SP2 (with KB2828185). However, I have yet to get a successful import on Server 2012 R2. The issue I am experiencing comes after what appears to be a successful import. All of the updates show up in the catalog, but none of
the approvals are there. I approve the relevant updates and the number of updates needing files on the status screen increase, but they never verify the content. The individual updates are stuck indefinitely waiting for content with no errors to
be found anywhere. Both servers have identical OS and WSUS configuration. Here is my procedure.
Source Server
- Approve/Decline relevant updates
- Wait for download to finish
- Run Server Cleanup Wizard
- Backup WSUSContent directory using 7-Zip to break into DVD size files
- wsusutil.exe export export.xml.gz export.log (I've tried export.cab and export.gz, neither produces a different result)
- Copy and extract all content to disconnected server.
- Import metadata with "wsusutil.exe import export.xml.gz import.log"
As I said, I get no related error messages in any event log, SoftwareDistribution.log, WindowsUpdate.log, Change.log.
When I've done this in the past with WSUS 3.2, the status dashboard would show all the approved updates that require content and that number would quickly decrease as the system would validate the files in the WSUSContent directory. This is occurring
on both my test server and my live server. I'm confident that I have missed something, but I need help. Anything that anyone can offer would be appreciated.

Hi Wayne,
Before we export and import updates, we should confirm that the settings for express installation files and update languages on the WSUS export server match the settings on the WSUS import server. If these settings do not match, updates will not
be correctly applied.
>> I approve the relevant updates and the number of updates needing files on the status screen increase, but they never verify the content.
Please try to run wsusutil reset.
If issue persists, please check if the WSUS content folder has the proper configuration.
Besides, could you please restart the export WSUS server and export/import again?
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Export and import the windows phone contacts as .vcf file to the application

Hi, I need to export the windows phone contacts as .vcf file and import it to my windows phone application. I'm unable to import the full details of a contact. Is there any sample code to export and import phone contacts programmatically. Please
help if there is any solution. Thanks.
Nikitha

Found this on the internet:
http://www.lumisoft.ee/lswww/download/downloads/Net/
If you download the Lumisoft.Net.Zip and extract it looks like there is a vCard folder with some classes that may help you.
You will need to use something like that or search a bit more and find a vCard C# Helper library.
Bret Bentzinger (MSFT) @awehellyeah

Using NIC Teaming and a virtual switch for Windows Server 2012 host networking and Hyper-V.

Using NIC Teaming and a virtual switch for Windows Server 2012 host networking!
http://www.youtube.com/watch?v=8mOuoIWzmdE
Hi thanks for reading. Now I may well have my terminology incorrect here so I will try to explain as best I can and apologies from the start.
It’s a bit of both Hyper-v and Server 2012R2.
I am setting up a lab with Server 2012 R2. I have several physical network cards that I have teamed called “HostSwitchTeam” from those I have made several Virtual Network Adaptors such as below
examples.
New-VMSwitch "MgmtSwitch" -MinimumBandwidthMode weight -NetAdaptername "HostSwitchTeam" -AllowManagement $false
Add-VMNetworkAdapter -ManagementOS -Name "Vswitch" -SwitchName "MgmtSwitch"
Add-VMNetworkAdapter -ManagementOS -Name "Cluster" -SwitchName "MgmtSwitch"
When I install Hyper-V and it comes to adding a virtual switch during installation it only shows the individual physical network cards and the
HostSwitchTeam for selection. When installed it shows the Microsoft Network Multiplexor Driver as the only option.
Is this correct or how does one use the Vswitch made above and incorporate into the Hyper-V so a weight can be put against it.
Still trying to get my head around Vswitches,VMNetworkadapters etc so somewhat confused as to the way forward at this time so I may have missed the plot altogether!
Any help would be much appreciated.
Paul
Paul Edwards

Hi P.J.E,
>>I have teams so a bit confused as to the adapter bindings and if the teams need to be added or just the vEthernet Nics?.
Nic 1,2
HostVMSwitchTeam
Nic 3,4,5
HostMgmtSwitchTeam
>>The adapter Binding settings are:
HostMgmtSwitchTeam
V-Curric
Nic 3
Nic 4
Nic 5
V-Livemigration
HostVMSwitch
Nic 1
Nic 2
V-iSCSI
V-HeartBeat
Based on my understanding of the description , "HostMgmtSwitchTeam and
HostVMSwitch " are teamed NIC .
You can think of them as two physical NICs (do not use NIC 1,2,3,4,5 any more , there are just two NICs "HostMgmtSwitchTeam and
HostVMSwitch").
V-Curric,
V-Livemigration , V-iSCSI ,
V-HeartBeat are just VNICs of host (you can change their name then check if the virtual switch name will be changed )
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to export and import from AIX to solaris a whole schema with different

how to export and import from AIX to solaris a whole schema with different character set
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
Import terminated successfully with warnings.

The conversion between the character sets on the two servers are handled automatically. Export from one server will export the data given the character set defined on that server. Import into another server will import the data given the character set defined on that server, performing a conversion if necessary. This can be a problem when going from single-byte to a multi-byte character set. In your case, the warning is simply for your information, shoule be no real problem given the character sets you're using.
For more info...check out (pertains to 9i):
Export
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96652/ch01.htm#1006791
Character Ste Migration
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96529/ch10.htm#1656
HTH

I want to deployment virtual machine by Hyper-V with windows 2012 server

I want to deployment virtual machine by Hyper-V with windows 2012 server. So I need step by step guide line with screenshot and video link.
Thanks,
Qamrul

Hi Qamrul,
Additionally here is the link for hyper-v getting started guide (server2008 ) :
http://technet.microsoft.com/en-us/library/cc732470(v=ws.10).aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Is it possible to replace masters with versions without going through the process of exporting and importing?

Is it possible to overwrite the master files with the versions without having to go through the entire process of exporting and importing back the images?
Thnx in advance

A small refinement if you shoot RAW. Remember, no RAW file can ever be edited or rewritten. Thus, in the old days, the flow was:
RAW>TIFF/PSD and you ended up with two large files. (This is why some folks used to delete the RAW Masters.)
With Aperture the flow is something like:
RAW+Version(s) Only the Version is only 30 KB. (There is, of course, additional overhead of Thumbs and Previews, but, depending on your settings, this is only a fraction of the size of a TIFF or PSD.)
You question goes right to the heart of the concept of a non-destructive workflow. With Aperture you always preserve your original Master file; the only things that are ever at risk are your edits (called Adjustments). Ironically, this is even more valuable if you shoot JPEG or TIFF as those files could be rewritten.)
Aperture goes to great lengths to give you the best of both worlds; you always have the Master to revert to and your "edits" take up very little disk space. And you don't have to waste time trying to sync folders of RAW, TIFF, and JPEG. Similarly, you never have to worry about resizing images, changing color spaces, or any number of other things that get locked into an image file when you use a destructive workflow.
Remember, Aperture will happily Export files in any format you may need. Export 'em, use 'em, delete 'em - your Masters are still safe in Aperture.
DiploStrat

Trouble with export and import

I am having trouble with export and import
here is what I did...
exp "'/ as sysdba'" PARFILE=parfile.txt
PAFILE
TABLES=user1.Table1
file=Table1_1006.dmp
LOG=Table1_1006.log
query="where to_char(processeddate,'YYYYMMDDHHMISS') between to_char(to_timestamp('1911-01-01 00:00:00','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS') and to_char(to_timestamp('2011-10-06 16:46:26','YYYY-MM-DD HH24:MI:SS'),'YYYYMMDDHHMISS')"here is my log from export
set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
Current user changed to user1
. . exporting table Table1 16019049 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.Then I started importing
/database2/rdbm15> imp "'/ as sysdba'" file=Table1_1006.dmp fromuser=user1 touser=user1 tables=Table1 log=imp_Table1_1006.log
Import: Release 10.2.0.5.0 - Production on Thu Oct 6 19:57:01 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export file created by EXPORT:V10.02.01 via conventional path
import done in US7ASCII character set and AL16UTF16 NCHAR character set
. importing user1's objects into user1
IMP-00015: following statement failed because the object already exists:
"CREATE TABLE "Table1" ("APPROVALTRACEID" VARCHAR2(64), "REQUESTOR"
"EID" VARCHAR2(9), "EID" VARCHAR2(9), "FIRSTNAME" VARCHAR2(32), "LASTNAME" V"
"ARCHAR2(32), "MIDDLEINITIAL" VARCHAR2(8), "TIER" VARCHAR2(3), "JOBTITLE" VA"
"RCHAR2(64), "JOBCODE" VARCHAR2(10), "EMPLOYEETYPE" VARCHAR2(2), "CONTRACTOR"
"TYPE" VARCHAR2(2), "EMPLOYEESTATUS" VARCHAR2(2), "COSTCENTER" VARCHAR2(10),"
" "COSTCENTERDESCRIPTION" VARCHAR2(50), "CONTRACTENDINGDATE" VARCHAR2(8), "A"
"CCOUNTSTATUS" VARCHAR2(2), "LOGINID" VARCHAR2(70), "APPLICATIONGROUP" VARCH"
"AR2(50), "APPLICATIONNAME" VARCHAR2(50), "APPLICATIONID" VARCHAR2(12), "LEV"
"EL1" VARCHAR2(512), "LEVEL2" VARCHAR2(512), "LEVEL3" VARCHAR2(512), "LEVEL4"
"" VARCHAR2(512), "LEVEL5" VARCHAR2(512), "PROFILECODE" VARCHAR2(50), "PROCE"
"SSEDDATE" DATE, "APPROVERMANAGEREID" VARCHAR2(9), "APPROVERMANAGERDELEGATEE"
"ID" VARCHAR2(9), "APPROVERT4MANAGEREEID" VARCHAR2(9), "APPROVERT4MANAGERDEL"
"EGATEEID" VARCHAR2(9), "APPROVERAPPOWNEREID" VARCHAR2(9), "APPROVERAPPOWNER"
"DELEGATEEID" VARCHAR2(9), "PERFORMEREID" VARCHAR2(9), "NATIONALID" VARCHAR2"
"(30), "COUNTRYCODE" VARCHAR2(9), "PASSPORTID" VARCHAR2(20), "DATEOFBIRTH" V"
"ARCHAR2(15), "CITYOFBIRTH" VARCHAR2(15), "VENDORNAME" VARCHAR2(50), "VENDOR"
"MANAGERNAME" VARCHAR2(50), "VENDORMANAGERID" VARCHAR2(9), "VENDORADDRESS1" "
"VARCHAR2(100), "VENDORADDRESS2" VARCHAR2(100), "VENDORSTATEPROVINCE" VARCHA"
"R2(15), "VENDORCOUNTRYCODE" VARCHAR2(9), "VENDORZIPPOSTALCODE" VARCHAR2(9))"
" PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(INITIAL 4076863488 "
"NEXT 1048576 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) "
" LOGGING NOCOMPRESS"
Import terminated successfully with warnings.but I did not get rows to database2
[server1]database2
/database2/rdbm15> sqlplus / as sysdba
SQL*Plus: Release 10.2.0.5.0 - Production on Thu Oct 6 19:59:17 2011
Copyright (c) 1982, 2010, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select count(*) from user1.Table1;
COUNT(*)
 0
SQL> exit
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE 10.2.0.5.0 Production
TNS for HPUX: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - ProductionEdited by: user3636719 on Oct 6, 2011 5:23 PM

user3636719 wrote:
Thanks for the reply...
Old EXP IMP doesnt have capability to append the row, since you're using 10g use datapump instead. use option TABLE_EXISTS_ACTION=APPENDso my import should be like this
imp "'/ as sysdba'" file=Table1_1006.dmp fromuser=user1 touser=user1 tables=Table1 log=imp_Table1_1006.log TABLE_EXISTS_ACTION=APPEND
Did you look up the command line syntax and control options for imp?
You should make it a habit that whenever anyone - especially a stranger on the web - gives you a bit of code or references a command or init parm or any some such, the VERY FIRST thin you should ALWAYS do is look it up for yourself and see exactly where and how it is used and what it means. That is how you grow beyond having to be spoon fed every little thing and become more self-sufficient.
If you had, you would have seen that there is no TABLE_EXISTS_ACTION option for imp and seen that it is an option for impdp. And realized that exp and imp are NOT the same thing as expdp and impdp.
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to tahiti.oracle.com.
Drill down to your product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

Can i install VS 2013 in my Virtual Machine with Windows 8.1 and work for Mobile Development,Mobile Emulator can work in my Virtual Machine ?

I have a Virtual Machine with Windows 8.1 OS and 4gb RAM, 200gb Disk.
I want to develop apps for Windows Mobile 8.1 with VS 2013 Update 4, Mobile Emulators can work in my Virtual Machine, bcz i am getting bellow error.
Windows Phone Emulator is unable to verify that the virtual machine is running:
Something happend while starting a virtual machine:'Emulator 8.1 WVGA 4 inch 512MB.APPUSER' failed to start.(Virtual machine ID xxxxxx-xxxxx-xxxx-xxxx-xxxxxxx)
The Virtual Machine Management Service failed to start the virtual machine 'Emulator 8.1 WVGA 4inch 512MB.appuser' because one of the Hyper-V components is not running (Virtual machine ID xxxx-xxxxx-xxxx-xxxx-xxxx).

No you cannot do that. You need a physical machine that supports Hyper-V
Jeff Sanders (MSFT)
@jsandersrocks - Windows Store Developer Solutions
@WSDevSol
Getting Started With Windows Azure Mobile Services development?
Click here
Getting Started With Windows Phone or Store app development?
Click here
My Team Blog: Windows Store & Phone Developer Solutions
My Blog: Http Client Protocol Issues (and other fun stuff I support)

Exporting and Importing Virtual servers with Windows 2012 R2 Hyper V

Similar Messages

Maybe you are looking for