Exporting HD to DVD

I have a mix of software.
Using FCP X, but still have DVD Studio Pro 4 to make DVD's.
I have a project, 1920 x 1080, and need to get it onto a DVD (using DVDSP 4) with the best possible quality.
When I export (share) through Final Cut Pro X (Pro Res), the file is very large. Then when I import into DVDSP, that software compresses it automatically and the quality is poor.
What's the best solution here?
Thanks.

If you have DVDStudio Pro, do your encoding in COmpressor. Grab one of the DVD presets and in the Inspector>Frame Controls, set Resize Filter to Best.
Take the two output files into DVDSP, and you should be able to create a great-looking DVD.
Good luck.
Russ

Similar Messages

When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

There have been a lot of recent reports of difficulties sharing to DVD, but haven't been hearing about unreadable disks. Posibly there was an encoding error. Or it could have been bad media (blank disk).
Does it play in your Mac?
What brand of disks are you using?
Russ

Exporting Subtitle from DVD Studio Pro

Is there a way to export subtitles from DVD Studio Pro or Is there a tool somewhere that will generate an STL file from a DVD Studio Pro subtitle stream?
Thanks for your help!

Yes, other than the manual -- which I have exhausted. It gave me the coding for a text-based caption, and the coding for a graphic, but not the coding that would put both on the same clip (same time value).
However, I can manually go into the subtitle inspector and add whatever element (the text or the graphic) each with its own offsets, and have them appear flawlessly together. I am convinced there must be coding that generates this effect I can use in the STL file, but I have found nothing on the web, nor any of several downloaded manuals (including pp. 456 - 460).
Any advice?

How to get best quality when exporting presentation to dvd?

I have just completed a keynote presentation with 21 slides including various movie clips.
I want to export this to Dvd where it can be played on someone elses computer and then onto a projector.
I have tried exporting it as a Quick time movie and then to idvd, however the quality seems to dimish considerably. The picture is shaky and the resolution seems rather low and grainy.
Could someone tell me how I can get this onto Dvd with the best quality possible. i.e if I change the slide size will this make a difference, or if I make the dvd interactive?
I am a completely new keynote user so I apologise for my ignorance but would appreciate any advice!
Macbook Mac OS X (10.4.8)

Thanks David.
I will give that a go. I went to the Mac store on Regent street, and they were really helpful. The guy there advised me to compress the movie in quick time and then export it onto either a flash drive or ipod, which can then be transfered onto any other computer (mac or p.c) which has quick time downloaded on it. This works for me as I needed my presentation to be exported to my bosses laptop P.C.
Sarah

I Use the last FCX but I have a prob when I export (share) to dvd the result is over 4GB for a single DVD is about 6 to 9 Gb for a short film of 1h so what can I do to fix this

I Use the last FCX but I have a prob when I export (share) to dvd the result is over 4GB for a single DVD is about 6 to 9 Gb for a short film of 1h so what can I do to fix this thnks

These "Share" files are accessed and used by the Create Disc app.
Create Disc is buried in the FCP X package.
Applications>FCP X>Show Package Contents>Contents>Plugins>Compressor>Compressor Kit.bundle>Show Package Contents>Embedded Apps>Create Disc
I'm wondering if having the Compressor Application on a Mac makes a difference to having just FCP X on a Mac and the use of the Sharing feature.
I have Compressor loaded and find that DVD and Bluray burns from Share without any glitches as some are experiencing.
Al

Vusing fcpx 10.0.9 and i'm trying to export it to dvd. Its been 4 days already and its only at 57%. Why is it taking this long to export it?

using fcpx 10.0.9 and i'm trying to export it to dvd. Its been 4 days already and its only at 57%. Why is it taking this long to export it?

using fcpx 10.0.9 and i'm trying to export it to dvd. Its been 4 days already and its only at 57%. Why is it taking this long to export it?

Best Export Settings for DVD burning and Computer viewing

Hello,
I am trying to export a 1 hour video that I need to be compatible with standard DVD players as well as viewable on any computer.
Original footage was shot with a Canon 5d Mark ii in 24fps.
I have done all of my editing in Premiere Pro CS6. From there, I exported a high quality file to bring into Media Encoder (for trials of best output). My master file from Premiere was exported with the Preset MPEG2. The only thing I changed in the preset was VBR from 1 pass to 2 pass.. This gave me a 6.2 GB file.
I then brought that file into Media Encoder where I have tried the following presets:
MPEG2-DVD - Match Source Attributes
MPEG2-DVD - NTSC 23.976fps Widescreen High Quality
MPEG2 - HDTV 720p 23.976 High Quality
MPEG2 - NTSC DV High Quality
These settings have encountered various issues.. some have significant banding, but most importantly, none of them will play on my DVD player when I burn them to a disc.
The discs I am using are Sony DVD-RW with a 4.7GB capacity.
Where am I going wrong here? From what I've read, the format needs to be MPEG2 to be viewed on DVD... Sorry if I sound ignorant! This stuff is tricky..

First off, don't export your timeline and then take the result to AME to re-encode, this is compressing your video twice and degrading quality (not to mention takes extra time and hard drive space). Always export direct from Premiere to Media Encoder. If you must use an "intermediate" file as part of your workflow, perhaps to archive a completed video that might later be exported to other formats, then use a lossless codec such as UT or Lagarith (free downloads).
For DVDs, you MUST use "MPEG-2 DVD". Other forms of MPEG-2 are not appropriate, as the official DVD specification requires that the MPEG-2 file has certain attributes. Not recommended to use "Match Source" for ANY export, just choose an appropriate setting as needed.
This should be correct for your application - MPEG-2 DVD > NTSC 23.976fps Widescreen High Quality
If you want to encode a DVD file over 1 hour in length, then you will need to adjust the encoding bitrate so the resulting file will fit the disc. Rule of thumb is 560/minutes = bitrate, but you might round down the result a bit to allow for menu overhead and such, depending.
Once you export the "MPEG-2 DVD" file, you can NOT simply burn that file to DVD media. That is only creating a DATA disc and it will not be playable in a DVD player (though a computer or PS3/PS4 may work since they can play most media files). To make a DVD that works in all DVD players (and meets the spec), it MUST be "authored" in a program like Adobe Encore. This compiles your content and menus and all that and then writes the result to the disc in certain way so that DVD players can read the disc. If you open any DVD on your computer, you will see a folder called "VIDEO_TS" and inside that there are .vob files and others. That is a proper DVD. And once you have a proper DVD, you can't simply copy the VIDEO_TS to another disc (as DATA), you must tell the burning software to create as a "VIDEO DVD" and not DATA, or it again won't be readable in a DVD player. Very picky spec, sorry.
When using AME to export MPEG-2 DVD, it will create two files, audio and video (.m2v and .wav), you will then Import both of those into Encore together. Note that you CAN import other formats into Encore, such as .avi but Encore will then transcode that to the correct MPEG-2 format anyway, so best that you take charge and create the right media in the first place in AME before you get to Encore.
EDIT: In AME, any time that your source is higher resolution than the destination, such as HD to DVD, you can check the "Max Render Quality" button in AME to provide the best downscale quality.
EDIT 2: I see you're using DVD-RW media. That is fine for experimenting, but for delivery to clients always use good quality DVD-R or DVD+R media. DVD-RW may not have the best compatibility with players and costs more anyways. DVDs are so cheap now that I just proof to DVD-R and toss the bad ones, up to you.
Thanks
Jeff Pulera
Safe Harbor Computers

Lightroom 3.6 exporting to CD/DVD is very slow

I'm using Lightroom 3.6 for Mac and when I export to CD/DVD it takes several minutes to burn the CD. For example, I have about 50 jpg images that I export at 100% quality and at 300 dpi with no watermarks, etc. I can use Finder to burn to disc funtion and I can burn 2 cd's in the time it takes Lightroom to burn. I want to be able to use Lightroom for all my processing from importing to corrections to printing to exporting on CD. When shooting events we take the images in jpg, import and put them into folders for each client. Once the client purchases a CD of all their images we burn the CD. I do not want to use separate software to burn the CD if at possible. Is there settings or something I can change in Lightroom to speed up the process?
Thanks!!

Thanks Lan. I take the photos in jpg format (not RAW) in the camera, use Lightroom import and assign a sub-folder. Once the customer reviews the photos (in Lightroom), they have the option to purchase a CD or print. If they want to purchase a CD, I use the export feature and choose CD/DVD instead of Hard Drive and Lightroom request to input a CD and I click on Burn. Lightroom then prompts for me to enter text for a name and then it starts the burn process.
I hate it takes so long because Lightroom is a good all-in-one prograrm that does all I need. The burn to CD/DVD is very nice becuase if I have more images than a single CD will hold, it will prompt for the 2nd, 3rd, etc CD until it finishes. Other CD burning software will only tell you that it cannot burn to CD because the data is more than the CD will hold. When in the field an event you cannot hold up sales because it is to slow to burn. Will have to look at other alternatives besides Lightroom for this.
Thanks again.

HT4718 After burning a slideshow from iPhoto export to a DVD, it will not play on my DVD player OS X 10.9.4

iMac 27' OS X 10.9.4 I burned a slideshow from iPhoto export to a DVD and now it will not play back on anything. The player said Unknown disc. What can i do?

I do find that using one of these programs will reduce the sharpness of the photos.
Granted, I've never used iPhoto - I use Photo to Movie for slideshows and various versions of iMovie for videos, but my pics are excellent quality and my videos are shot in 1080p (better camera) or 720p (small camera) and the results are superb on my TV using both iDVD and Toast. However, I do not encode in iDVD, I simply use it to add a theme and menus. The encoding is done by Photo to Movie, or iMovie 06 HD (the only version ever to process losslessly) and either/both are imported into iDVD as a complete .mov, or Toast.
Since using those methods, I've never had a problem with the sharpness or crispness of my footage. My eyes cannot discern a difference between my "production" and true HD (unless of course I shook the camera while shooting, LOL).

I can not export photos onto DVD. After I click export, close iPhoto, click Finder, At this point I can't find the file to burn. (copy to be used on Windows) Sorry for the lame question....new to mac

I can not export photos onto DVD. After I click export, close iPhoto, click Finder, At this point I can't find the file to burn. (copy to be used on Windows) Sorry for the lame question....new to mac

So it sounds like you are trying to burn a DVD with photos on it so the photos can be either transferred to or displayed on a Windows PC, is that correct?
For the purposes of this I am going to assume you are using iPhoto '11.
Gather the photos you want to burn to DVD in one album in iPhoto. This is not absolutely necessary but it sure makes things easier for me.
Select that album, then go to the File menu and select Export...
In the dialog that shows up, select the File Export tab. Select the setting you want to use for export. Click the Export button.
Another dialog will show up. Set the location to Desktop and click the New Folder button. Name the folder something nice and descriptive and click the Create button.
Click the OK button. Quit iPhoto as the rest of this work will be done in the Finder.
You will now have a folder on your desktop with that nice descriptive name. Find it and select it. Go to the File menu and from it select Burn "Descriptive folder name" to Disc...
Insert a blank DVD when prompted.
Let the finder complete the work and eject the disc afterwards.
That's it. Best of luck.

IMovie Export Settings to DVD

Hello
Would someone be able to let me know what the best settings are for exporting to DVD from iMovie 08 to iDVD?
Is it best to publish or export as a quicktime movie .mov/.dv. The reason being is I am finding that when i publish the quality of the DVD isnt that good and the file size seems rather low. Im shooting on Sony Handycams but also Sony HVR-Z1 so the quality should be good.
Any suggestions would be appreciated.
Glen.

Hi friends,
I have such a problem with my Imovie project. Its true that I have IMac not a long time but I heard that the system is great. I bought it because of functions that have inside like Imovie. I made my first project in Imovie and I wanted to export it to dvd. What I get was an unacceptable (****) quality. I've made import movies from brand new FULL HD Sony camcorder so it should be increable quality like by HDMI cable conected directly to the FULL HD LCD TV. I'm talking about EXPORTING not IMPORTING movies because imported movies was a HD quality. The problems started when I tried to burn the project to DVD. The quality was unacceptable. May anyone help me with that PLEASE ??? ONES AGAIN MY QUESTION IS - HOW CAN I MAKE A HD OR DVD QUALITY MOVIE FROM IMOVIE PROJECT WHICH MOVIES FILS WAS DOWNLOADED FROM SONY FULL HD CAMCORDER ??? Sorry to bother You but 2 hours talk with Imac support didn't get any useful information - What I heard is "MAYBE MAX QUALITY IS 920*540 BUT HE WASN'T SURE" so no useful at all. I can't find it anywhere even with manuals, or like I said, with a Imac support. PLEASE HELP IF YOU MAY ... My home email is [email protected] Best Regards Andrzej

Cs5 export direct to dvd

I cannot seem to have any luck exporting direct to DVD bypassing Encore. I export to media, tried several selections but no output selection to dvd.

Hi,
There is no way to directly export to a DVD from Premiere. You've got to use Encore.
When exporting a file from the Export Settings dialog box for use in DVD or Blu-ray Disc creation, select the format appropriate for the target medium. For single-layer or dual-layer DVD, select MPEG2-DVD. For single-layer or dual-layer Blu-ray Disc, select either MPEG2 Blu-ray or H.264 Blu-ray.
Thanks!
Rameez

How to export MPEG2 from DVD Studio Pro with subtitles?

Does anyone know how to export MPEG2 from DVD Studio Pro with subtitles?

You cant do that...
We might be able to help you more if you are trying to do something specific,
-Jake

Exporting / Importing into DVD Studio Pro from Final Cut Pro

Hi All,
I am am exporting footage from FCP HD and importing it into DVDSP, the final DVD will be set to 16:9. So what do I export my files from FCP as? Someone told me that I don't export it at 16:9, I export it so it's squashed and then DVD SP does it's thing to it...
Any ideas?
Thanks,
Tom

Hi Tom,
When I do this I work in FCP using a 16:9 format setting then export using Compressor. In Compressor I choose a best quality option and make sure the 16:9 setting is enabled in the settign dialog box (in the Batch window next to Source Media - just double click on setting).
In DVDSP you simply ensure the project is in PAL or NTSC and 16:9 format.
This takes care of the whole thing with the finished article paying back fine on 16:9 monitors.
Best of luck
Michael

Cs3 export for mpeg2-dvd settings -happy as a clam-

Hi,
Im using CS3...
I want to export from CS3 to mpeg2-dvd preset ( ntsc high quality, which is set to 4 out of 5 on the quality slider setting )
My footage is 720x480i 29.97, 16:9
The dvd will be watched on computer and Digital TV ... so I'm thinking I will convert to progressive.
My bitrates in the preset are:
min: 1.5
avg: 4
max: 7
gop m frames 3
n frames 15
The file size exported is 1.4 gig. It looks OK but not great compared to timeline playback. I've been looking at my notes ---about making exports----but I am so happy ( happy as a clam ! ) ...that I even managed to get a 51 minute story out of this source material ( walking and walking and walking , long story..., not to mention probs with the continuity ).... as I was saying, I am so happy with the product--- I was thinking maybe there's some good advice re: export while I go get some beer to celebrate !
..... I was wondering if you all might have some suggestions for changing my bitrate settings to give me a better quality export....and I will then burn a DVD someday with that exported file.
Rod

Hi ,
Thanks Bill..yes, I've looked at those threads, those guys are incredibly
cool...very knowledgeable....
Oddly enough a lot of what they know has come from experimenting and "trial
and error" type stuff....or else is wouldn't be as original and good as it
is.
I admire that.
I'm going to up my avg bitrate and see what happens...screw around with that
a few times ...see how it goes...
You see, at the moment I am just doing the video, no stills ( no slide show)
and no music track ...so that will change as I add more stuff....the
bitrates and overall compression.. I do , thanks to all you guys, know that
much...Just thought I would go get some beers and ask for 51 mins for the
preset of mpeg2-dvd- from CS3 might be....what a better rate might be right
off the bat....
No big deal.
You have no idea !!!! I am sure happy clams make everything better, whether
it's chowder or broadway plays !!!! (or was that about investing clams? )
Rod

Can a slideshow exported to a DVD be shown on a PC computer?

I created a slideshow in iPhoto and exported it to a DVD which plays fine on my Mac, but I was told it won't play on a Windows PC. Is that true?

Sure it can - if the PC has QuickTime Player - a free download
Export the slide show to the desktop and then using the finder burn the exported QT movie to DVD
Who ever told you no has no idea what they are talking about
LN

Exporting HD to DVD

Similar Messages

Maybe you are looking for