Exporting to JPG, but then Editing Again

I edited my .NEFs (RAW) and then exported them to JPG for distribution.
I noticed that they needed to be sharpened some more so I sharpened the JPGs.
Since LR does not change the original JPG file, I can I distribute the edited JPGs? The only logical think I can think of is to export them again, to a new folder.
MichaelM

I'm a bit confused by your description. I assume you have a "master" image in .NEF format (a RAW). You then export as JPG. What you've done at this point is create a new file (JPG) for use outside of LR. However, you say you sharpened the JPG. Since that exists outside LR, I'm assuming you resharpened the exported JPG using an external app like Photoshop. Or did you go back to the NEF and sharpen it some more in LR?
In your second paragraph, you mention that LR "does not change the original JPG file" - what do you mean by that? Wasn't the NEF the original file? Or did you import the exported JPG back into LR. If so, then you're missing the LR paradigm. Your NEF is *the* original. There's no need to create a derivative JPG file and put it back into LR. If you want different versions of the NEF, use virtual copies.
When you export, you are essentually going into your "darkroom" and creating a "print" for external use like email, web, or printer. What you have in LR should be the master image and possibly virtual copies of the master that have different edits applied. These are all used to create "prints" via export.
To answer your question, if I understand it correctly, if you have edited a master image (your NEF) then you can export it again (as a JPG for example). You can keep editing the master and re-export it to JPG. This is like creating multiple "prints" from a negative that you keep scratching or whatever to make changes to it (using pre-digital terminology).
- Pierre

Similar Messages

  • Hello.. I'm having trouble with my google bookmarks since I upgrdaded to Firefox 3.6.6, when I click on my bookmark tab it opens but then closes again in a matter of seconds. I can't seem to get my list to stay open long enough for me to browse through. A

    Since upgrading to Firefox 3.6.6 my bookmarks will not stay open, when I click on the bookmarks icon on the toolbar my list opens up but then disapears again with in about 10 seconds.... i.e, not enough time for me to chose which site I want to open. I've tried deleting cookies, temp. files and I even tried a complete re-install of Firefox but I'm still getting the same problem.... Any ideas please?
    Thanks.... Jon T.

    I'm having difficulty visualizing what is wrong but try some basic steps first:
    Launch Safari while holding a Shift key - this will start Safari with just your Home page
    If you can see Reset Safari from the Safari menu, try that.
    In addition to downloading and installing Safari again, try reapplying just the Snow Leopard Combo Update: http://support.apple.com/kb/DL1399 There is no need to uninstall Safari first.
    Lastly try deleting Safari's Preferences file: ~/Library/Preferences/com.apple.Safari.plist

  • Mavericks has broken most stock apps, app store ,preview, messages, facetime ect the list goes on they bounce in the menu then nothing its been like that since installing mavericks fixed briefly by reinstalling but then stopped again very quickly

    mavericks has broken most stock apps, app store ,preview, messages, facetime ect the list goes on they bounce in the menu then nothing its been like that since installing mavericks fixed briefly by reinstalling but then stopped again very quickly
    any help ?

    You most likely ran a defective third-party "utility" such as "CleanMyMac" or "MacCleanse" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system and many applications.   
    The first thing you need to do is remove that software according to the developer's instructions. Never install it, or anything like it, again. Then see below.
    If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
    *The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

  • QuickTime X - Export creates file but then deletes it

    I have very strange export behaviour now on QT X, when I use 'Save As' to compress a .mov file (select Save As, give a destination file name, then select format as 480p), it all appears to work but as the export progress bar completes the destination file disappears.
    As the export starts a zero byte destination file is created. While the export is happening 'ls -la' shows a temporary file being created and growing, but as it completes, when you'd expect the temp file to replace the destination file, both are deleted.
    No errors seem to be reported to the screen or to syslog.
    It worked fine once I'm sure, but now it fails every time. Could I have I messed something up or has anyone else seen this?
    Cheers,
    Dan

    I was delighted that QuickTime X captured the screen and audio of my first lecture and exported just fine. However on the next try it appeared to be working in just the same way (Stop Recoding in Menubar until clicked) but not file was created at the end.
    Most frustrating. Does anyone know where the temporary files are stored in case it is lurking somewhere?
    Nick

  • E3000 - WoL - Works Once, But Then Not Again

    Greetings,
    I am using WoL for one of the PC's connected to a E3000 on my home network.  I can successfully power on the PC from S3 (standby) or S5 (power off) state one or more times, but after a certain amount of time the E3000 fails to send packets to the destination PC and it fails to wake.
    Logging indicates packets are being received by the router.  They just stop being forwarded to the destination after a certain period of time.  I haven't measured this time exactly. 
    Research indicates that the router might be removing the destination PC's IP from it's ARP table, which in turn makes the PC unreachable until it is manually powered on and off again (S5) or put into standby (S3). 
    It works reliably and consistently, then stops within a few hours.  The issue is not related to power management on the NIC.  As I said, packets on the WAN are received successfully from the outside.  Packets on the LAN are also received, but not forwarded for wake.
    I am using various utilities to wake.  All work well.
    mc-wol
    Magic Packet
    Mocha VNC for iPhone   
    Does anyone have ideas what can be done to make waking the PC consistent?  The only other thing I haven't tried is manually inputting the static IP on the NIC...  the same IP that is reserved for it's MAC address set up on the E3000.  
    Thanks In Advance
    1 x r7000 Nighthawk 1.0.3.24
    3 x WNDR4500 v1 / v2
    e4200 Rev 1 f/w 1.0.05
    e3000 Rev 1 f/w 1.0.04
    QNAP TS-219P-II 4TB
    dns323 ext3 4TB
    Roku N 1080p
    Altigen ip-710 VOIP phone
    Other Routers - Asus (just ok), DLink (junk), Netgear (Current Favorite) & ProSafe, wrt54g & G2
    wvc54gca - Dumped this as it only support TKIP encryption & 54mbps
    Solved!
    Go to Solution.

    For Wake on LAN to work on a computer, it must have the following:
    •   A wired connection to an active computer network
    •   Motherboard
    •   Network adapter and adapter driver that supports the standard Magic Packet format
    •   Computer basic input/output system (BIOS) configured for WoL
    •   An operating system that supports WoL
    •   All routers between the remote location and computer required to WoL must allow IP directed broadcasts and support IPv4
    Here is the link Wake on LAN feature and settings: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20e3824721bb44f6afb3093679a7e883_21418.xml&pid=80&...

  • Display will wake but then sleep again.

    I close the lid on my macbook and it and the 23" cinema display will go to sleep. On my wireless mighty mouse or wireless apple keyboard i will wake the display up. The display will wake and I can use the computer for about 10 seconds and then it sleeps it self again. How do I get it so it doesn't sleep its self.
    ps. I got it set so the external display is the main display with the dock and menu bar.

    Thanks. That worked. If you didnt tell me that i would of been stuck with my screen on my macbook open.
    Cheers

  • How do I create a form that can be edited, then mailed, then edited again?

    I am trying to create a form that would be emailed to one person, they would complete part of it, email it on to a second user who would then complete another part based on the input from the first, and then forward it onto a third for their input.
    the issue I have is that once the second person enters their information, they can not save their additions and continue the process.
    any help would be greatly appreciated.

    Interactive forms cannot be saved locally using Reader. To do local save you either have to have Acrobat on each desktop or have the form Reader-extended to enable local save in Reader. A form is Reader-enabled using the LiveCycle Reader Extensions server component.
    Steve

  • ITunes crashes when trying to sync photos, I have called Apple suport and I have erased and reloaded itunes, seemed to work better but then crashed again in the middle of sync photos saying ' IPAD cannot be synchronized. The file required cannot be found'

    This seems to be a common problem...can anyone help?

    Have you tried deleting the photo cache from your computer and then re-trying the photo sync ? The location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314

  • Tbird reports "Not Responding" repeatedly, comes back but then crashes again

    TBird version 24.4, Windows7 current, McAfee anti virus.

    To diagnose problems with Thunderbird, try one of the following:
    *Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
    *Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
    ; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

  • Hp 620 connection randomly lost,after restart sometimes comes back then goes again

    Randomly wireless connection goes away.And says not connected and no connection available.Wireless button stays always white and doesnt respond . After restart sometimes connection comes but then goes again after 1-2 minute.Network adapter looks like works fine.there is no sign on that.but i cant connect to the internet via wifi. I dont know what to do . Please help me to solve this problem

    @ayazgurbanov 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Please help! I SAVE AS: .jpg but it somehow converts to .jpeg.

    It all started happening after I installed a program called GIMP image editor. I played with it a bit then saw that when I used my graphic programs it had messed something up so I deleted the program but my Corel Painter and all others appear to SAVE AS .jpg but then become .jpeg.
    Can anyone help me ???
    THANKS!!!!

    Hi Matt...
    Thanks for reply...
    I know logically they are, but ever since this started happening, pc users can't open these files..
    (and why is this happening anyway?)..
    If I send in Applemail, even when I check windows friendly, they can not open the files. They always could as .jpg.
    I'd love to know what is saving them as .jpeg all of a sudden.
    Here's what happens:
    I save as: .jpg
    File looks normal..xxx.jpg
    the I email it..
    receiver gets the file but it has somehow become: xxx.jpeg
    I tried emailing it to myself also to verify.
    2nd scenario:
    I save as xxx.jpg
    and 2 files are created:
    1 as .jpg
    1 as .jpeg
    It's so bizarre...and the fact that the files can't be opened as .jpeg easily is making me nuts...:)
    Did this GIMP program change some kind of code or something in Mountain Lion?
    Thanks for reading this!

  • When i signed in it recognized my name and password but then it asks formy password again but the email address i cant edit and it says like randompeoples from my buddy list it doesnt say mine so i cant enter my password

    when i signed in it recognized my name and password
    but then it asks formy password again but the email address i cant edit and it says like randompeoples from my buddy list i must of shared music or something with its so weird and it doesnt say mine so i cant put my password

    Go to Settings>icloud, scroll to bottom of screen and tap Delete Account.  Then log in using a different ID.

  • Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happen

    Is there any easier way to edit imovie files that have been exported as mov file then added to FCE 4?? As every move I make has to be rendered and takes forever??? Also my recording is going out of focus without me touching the camera, why has this happened any idea what causes this??
    iMovie '08, Mac OS X (10.5.8), FCE 4

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • My Images won't open in Photoshop CS5 when I click on Edit in Lightroom - even though this option has been selected?  To edit in Photoshop I have to export image from Lightroom then import into Photoshop.  I have other programmes such as NIK and if I wish

    My Images won't open in Photoshop CS5 when I click on Edit in Lightroom - even though this option has been selected?  To edit in Photoshop I have to export image from Lightroom then import into Photoshop.  I have other programmes such as NIK and if I wish to edit in these everything works fine.

    Same here. I've never had trouble with this function before.
    It opens the Photoshop application with all the menus/windows, but it never opens the actual image I chose to work on.
    I'm on a Mac, using OS X Yosemite, 10.10.1  Lightroom is version 5.7  Photoshop is CS5, version 12.0.4
    FWIW, I also can't automate>Photomerge ... . Makes me think Photoshop, not Lightroom, is all wacky. I tried dumping PS preferences

  • Hi - my mac mini drops the internet after 30 seconds. If i reset in the diagnosics it works again but then drops it just the same. Its connected to my home network. All other apple devices are fine?

    I have a home network which services:
    Apple TV
    Air port express
    Mac book pro
    I phone
    All the above wrok perfectly.
    I have a mac Mini which will join the network and operates fine but keeps dropping the internet after 30 secods of connection?
    If I reset everything in the diagnostics box it will rejoin the network but then drops it again !!!
    any ideas?
    Chris

    Hi Chris, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x/10.8.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

Maybe you are looking for

  • How to lighten the front portion of a seashell?

    i would like to lighten the front portion of a seashell. how would i do this/ what selection tool etc.  Attached is a photo of a seashell floating on some clouds. Thanks for your help!

  • Powershell loop? newbie in powershell logic.

    Hi All. I have a challenge regarding a script. I want to chech if a file exists on a remote virtual server(this works). if the file exists i want to close down the vm(this works) and remove a legagy adapter from the virtual machine. so what i need is

  • [ignore: solved]

    I've solved this one myself...I'm pretty new to SQL and didn't realise it had an UPPER() function...oops I have a JTable which is fed from a database. I would like to be able to navigate it via the alpha keys on the keyboard; i.e. if I type an N then

  • Taskflow popup window size

    Hai i had opned a task flow as an inline popup i want to the size to be increased is this possible to achive if so how to do it?

  • Authorizations for creating change request in ALRTCATDEF

    Hi all, Can any one tell me, what are the roles I should have to create a transport request (change request or task) for saving alert category in ALRTCATDEF transaction in SAP XI? Thanks in advance. Regards, Prasad Babu.