Exporting video with Flash CC

How do I adjust settings to Flash CC for exporting video? A Quicktime video that was once about 50MB from Flash CS6 is now 7GB with Flash CC.

Thank you. However, I see no setting options in Flash Pro CC prior to
creating the video. It's now an odd two-step process to create a Quicktime
video with the settings and size I want via Encoder.
On Mon, Jan 20, 2014 at 12:56 AM, Catherine Joseph <[email protected]

Similar Messages

Need help with coding for HTML5 Video with Flash fallback

Hello, need help with my coding in Dreamweaver CS5.5 for HTML5 video with Flash fallback. Not sure if the coding is correct. Do I need anything else Javascipt etc?

The reason you see a blank page is because it's trying to load the file that is pretty humungous and there is no preloader. So, you see a white screen till it complets loading.
Also, the reason why its loading a SWF file and not any of HTML5 type video is because your doctype declaration is XHTML1.0 and not HTML5.
Change the 1st line in your .html file from:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
to:
<!DOCTYPE html>
Then see if your HTML5 video types load with <video> tag.

Shutterfly requests 10.6 or lower to produce a video with flash player what can I DO?

SHUTTERFLY requests 10.6 or lower to produce a video with flash player what can I DO?

Install 10.6 or lower. http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html

Export Video with Multiple Audio Tracks

I need to be able to export video with audio on multiple tracks. I have moved to CS6 from FCP 7 where this was rather easy to do. I can make a preset in AME with more than enough mono tracks but after the encode the video is always smashed to one mono track. I am not doing a 5.1 mix, there are different mic's on each track that need to remain independant of one another and mixing them down within Premiere is not feasable. Are there no options to just have the audio 'pass through' like Compressor? Sorry if there are other posts but I have been searching forever and can not find a simple answer on this topic.
Also, is there no way to have the source timecode burn in? Putting a filter on the video in a sequence is unacceptable, I am very displeased to find that this doesn's seem possible in AME or Premiere, it has been part of Apple's suite for years.
Example of my preset from Compressor:
Name: Apple ProRes 422 (Proxy)
Description: QuickTime movie with Apple ProRes 422 (Proxy) and audio pass-through
File Extension: mov
Estimated size: unknown
Audio: multi-track pass-through
Video Encoder
          Width: (100% of source)
          Height: (100% of source)
          Pixel aspect ratio: Default
          Crop: None
          Padding: None
          Frame rate: (100% of source)
          Frame Controls: Automatically selected: Off
          Codec Type: Apple ProRes 422 (Proxy)
          Multi-pass: Off, frame reorder: Off
          Automatic gamma correction
Progressive
          Pixel depth: 24
          Spatial quality: 50
          Min. Spatial quality: 0
          Temporal quality: 0
          Min. temporal quality: 0
Timecode Generator
          Position: Lower Right--Title Safe
          Alpha: 1.000
          Label: Source Timecode
          Start Timecode at 00:00:00:00 false
          Text Color: r:0.0000, g:0.0000, b:0.0000
          Font: Helvetica, 36

Hi James,
For exporting a multitrack .wav file, you have to start a project with a multichannel audiomaster (3-16 tracks).
Copy and paste your complete edit to the new editsetting.
Now in the audiomixer you can route your audiolayers to the multichannel you like.
(CH1+2 pan to left is channel 1, pan to right is channel 2 and for a stereo track pan to center : channel 1 for left and channel 2 for right.)
Then you export your project to a 3-16 tracks multitrack .wav file.
When you need mono tracks you can import your multitrack .wav file in premiere. Then send it to Audition (edit in Audition) and then adobe will convert the file into mono tracks.
You'll find the mono tracks in your audio capture folder or can premiere search for then by 'reveal in explorer'.
The multi track .wav file has got timecode within the file.
When exporting in QT you can also choose for a multitrack audio file. It also contains your timeline timecode.
.avi or .mp4 video files cannot be exported with more than 5.1 channels of audio
MXF OP1a in XDCAMHD can also be exported with max. 16 channels of audio. It also contains your timeline timecode.
Hopefully you can get further with Premiere Pro with this info.
Succes with it!!
gr. Mano

Playing videos with flash player

I can't see pictures from some of Home Depot online videos with flash player?

'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Please report back soon.

I cannot download videos with flash video downloader from other websites also.Whenever I want to download video it says choose file.

I cannot download videos with flash video downloader from other websites also.Whenever I want to download video it says choose file.

I don't know that any Flash downloader extensions work in Firefox for Android. You would be best off asking for support from the extension authors at https://fvdmedia.userecho.com/list/21650-firefox-extensions/?category=4944

Exporting video with cc 2014 has issues

Just downloaded cc 2014 opened up a file from 7. Edited the video and now the export has random flashes. H.264, MPEG etc shows the random flashes. I removed one effect lumetri effect and reduces some. What is wrong with the latest version?

Hi Mwhurleyme,
mwhurleyme wrote:
Just downloaded cc 2014 opened up a file from 7. Edited the video and now the export has random flashes. H.264, MPEG etc shows the random flashes. I removed one effect lumetri effect and reduces some. What is wrong with the latest version?
Can we get more info?
FAQ: What information should I provide when asking a question on this forum?
Thanks,
Kevin

Final Cut Pro X export troubles: exports video with only half the audio.

Ever since I updated Final Cut Pro X, I've been having problems exporting. I either get error messages or the audio doesn't fully export. When I tried exporting a master file to my desktop, I got a message saying “error occurred when creating frame” then lists the frame number. Someone suggested copying the project file and pasting it into a new project. I did that, and it exported without the error popping up; but halfway through the video, the audio disappears, and does so in the same spot it disappeared in a previous youtube export before I tried the copy/paste method. I don't have the original footage; I'm making color correction changes to an edit; so I'm not sure if the second half of the video is somehow corrupted, don't know how to check that, and not sure what to do if it is.
Another suggestion given to me was to delete the event my footage is in, then create a new event, re-upload all the footage into that one, and relink my project files to it. He also said don't delete my event and project folder at the same time, which I'm not even sure how you simultaneously delete two things on a laptop. I don't understand how this method would work though, since deleting the event makes my project disappear since it has nothing to link to. I'm scared to try this method since I don't want to lose my work; I really don't want to color correct it all over again.
Is there any way to successfully export the file suitable for youtube posting, or is this a bug in the system they haven't fixed yet?

Just turned off background rendering.
I'm not certain what you mean for specs in a specific point in the video, but here are the specs for the entire edit I initially received:
Dimensions: 1920 X 1080
Codecs: H.264, AAC, Timecode
2 Audio Channels
Total bit rate: 12,083
Size: 951,735,770 bytes (951.7 MB on disk)
Here are the specs for the exported video that has the audio issue:
Dimensions: 1920 X 1080
Codecs: H.264, AAC, Timecode
2 Audio Channels
Total bit rate: 12,274
Size: 966,817,082 bytes (966.8 MB on disk)
The video is 10:28 minutes long and the audio leaves at 5:57.
If that wasn't what you were looking for, just let me know. I'm not very good with technical stuff sometimes so may have misunderstood.
Is there something I should have done to the piece before I began color correcting it, like transcoding?

Flicker showing up in exported videos with various codecs

I am exporting videos using various codecs and all of them are showing a flicker occasionally that is obviously not in the original footage or in the editing footage. The flicker is a brief one-frame looking jump to black. The flicker only seems to occur viewing it on the web. Viewing the same file on my system using "Preview" (Mac OS X) produces the same flicker. However, watching it using the full QuickTime viewer does not show the flicker.
The footage was shot using a DSLR and is from a Pentax K7 and is 1280 x 720, 25 fps.
Edited footage in Premiere CS6 looks fine. I am using export settings for 720p from H.264 for YouTube, Vimeo and straight HD 720p at all three available frame rates (23.976, 25.0 29.97). I have also exported using QuickTime codecs at HD 720p, H.264
Here is a link to two examples of the videos with the flicker probelms. One flick occurs in the first one in several places, the first one right at the beginning as the fade-in is still occurring, but occurs in both videos throughout occasionally.
http://kb8wfh.zapto.org/wiki/pages/n7a531y/Jamie_Chase_CU__Logo_revision.html
Any idea as to what is causing this and hot to fix it?
Thanks.

Bad form putting QuickTime's on the web. This requires unwanted plug-ins to be required for viewing.
Use MP4 instead.

Still can't watch videos with flash

I am a firefox user. In some sites, the videos require flash and windows media. I have both installed . but, there are still some videos I can't view and when I ask the site to test what software is missing, it says that I do NOT have the flash installed...
Last time it did work, I enabled/disabled some plugins, and then it suddenly did work - I just don't rememeber what exactly I did ... and it doesn't seem to work now.
HELP!!! thanks.

Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox 13 are most probably caused by a recent Flash 11.3 update and/or a malfunctioning Real Player browser plugin.
In order to remedy the problem, please perform the steps mentioned in these Knowledge Base articles:
[[Flash Plugin - Keep it up to date and troubleshoot problems]]
[[Flash 11.3 crashes]]
[[Flash 11.3 doesn't load video in Firefox]]
Other, more technical information about these issues can be found under these Links:
http://forums.adobe.com/thread/1018071?tstart=0
http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
If you've already tried all this, I'd suggest the following:
Install Firefox 14.0.1.
Update your graphics driver and Windows. [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Then test again.
Please tell us if this helped!

Issue loading videos with flash.

Hi, how are you all doing? Maybe someone knows how to fix this .. flash sometimes (like once a day) instead of playing youtube videos or anything with flash right away (like usual) it waits until the whole video loads till playing it and the loading sing is the only thing i see. The only way I have right now to solve this issue is restarting the computer and it goes back to normal.
what could be?
I have flash 11,0,1,152 on windows xp sp3 and the issues goes on and every explorer (I've tried mozilla, opera, google chrome and IE.. and the same happens). but I use google chrome.

Try running the Bunny stage video here: http://www.adobe.com/devnet/flashplayer/stagevideo.html
If it starts buffering, it means your graphics driver is probably not up to the job. An update might fix the problem.
You could maybe try running the videos in HTML5 instead of Flash to see if that makes any difference. To join, click the link underneath the buttons at: http://www.youtube.com/html5 (no forms to fill in). Go to the same site to leave the trial.

IPhoto: Export videos with titles

All of my videos are in iPhoto, and I've added titles to all of the videos within iPhoto.
However, when I EXPORT these videos to my desktop, iPhoto doesn't export them with the titles that I've assigned to them in iPhoto.
iPhoto exports them with their generic title (such as "img_0015.mov") that they originally had when I first shot the videos.
How can I get iPhoto to export all of these videos with their titles intact?

Are you checking this checkbox in the slideshow settings pane?
which will give you this in the slide:
OT

Exporting video with normal settings but video plays buffered

Hi,
I have a preset in APP that i always use for TVC, today i went to use the same preset (with good quality footage) and when i go to play the exported video it plays very buffered and you can barely watch it.
I exported a video yesterday using the same preset and now that does the same thing (yesterday i worked fine) on other computers too it also buffers.
Any ideas?

fiatchrysler wrote:
the frame rate was very high i changed it down to 25 (thats the only thing i changed' and exported it again as H.264 format and 'match source'. still shows as skipping when playing exported video.
The video footage i am using to create this video is in quick time - would that have anything to do with it?
Did you try manually lowering the bitrate as I suggested?
If the original MOV footage plays fine, I don't see a reason for it being an issue after being exported.

Exporting video to Flash

Best way to export my 3-5 meg quicktime videos to flash and keep near same quality and file size?
Thanks!
John Cook

Thank you Agrawal,
If we try Adobe Elements would we need to know the disc file name/location of the video in APASE or would elements find the clips for us?
What format are video clips stored as in APASE
Our deadline is Sat. March 1 so any help would be appreciated
John A. Kelly

Exporting videos with a 00:10:00:00 sequence timecode and 4 mono channels of audio

Hi,
I have to export a video for broadcast with a starting timecode of 00:10:00:00. I have found out how to change my zero point on my sequence so that the video starts at the right timecode, however when I export my sequence, it exports it with a timecode of 00:00:00:00. I have tryed both checking and unchecking the 'use 00:00:00:00 timecode' box with no avail. I am using Premiere Pro CS5 (5.0.3) exporting to format: Mpeg2 MFX and codec: IMX30 Pal.
Also does anyone know how to export a video from premiere with 4 mono channels rather than one stereo track. This is in the delievery spec and would be really grateful if you can get me out of this pickle!
Thanks
Graeme

Just curious but try a test export in another CODEC.
In the past I have never had a problem doing what you want in .mov or .avi. (never delivered Mpeg2 MFX and codec: IMX30 Pal.)
FWIW: I never use TC in that way now ...since all our broadcast delivery became file based.
Cant imagine why 00:10:00:00 as an example ... would even be a "delivery spec" any more! Question them maybe.

Exporting video with Flash CC

Similar Messages

Maybe you are looking for