EXS sampler can't find the samples anymore...
Hi there,
there's hopefully/probably a simple solution to this problem but I'm too stupid to find it:
Overall info:
I bought a new Mac, installed a fresh OSX 10.5.5 system and used the immigration assistent to move my old user account including all applications from my old Mac (OSX 10.4.9) to the new one.
Of course I had to re-new all serial numbers, get new authorization codes for all the plug-ins, etc., etc. and now I'm stuck with the EXS24:
I had all my own samples on an external hard drive in a folder called Akai Samples. Then I had an Alias of this folder in the Library/Application Support/Logic. The Sampler Instruments ("xxxx.exs") are all located at User/Library/Logic/Sampler Instr.
When I opened an EXS instrument, it obviously loaded the AIF samples from the external hard disk. In case I had saved samples together with a song project in a specific folder, EXS even showed me both sample location when loading the instrument with a new song.
The problem:
Now when I open a blank new song and add an EXS24 with any sampler instruments, it starts looking for the required audio samples and then this process takes forever. I mean, the maximum I handled to wait was like 30 min. Logic is not crashed, it seems, but I guess it does, as it won't search the hard disks or at least won't find anything and most of all doesn't stop looking.Clicking "cmd+." doesn't help.
I also replaced this external hard disk with the samples with a new, additional internal hard disk. So if Logic searches for this old hard disk it's not there anymore.
This is really tricky when trying to open old songs. It's simply not possible anymore. Now is there a way to sort of refresh the library, deleting the Logic preferences did not really help.
Same situation also when I click on the Media button top right next to "Bouncing" and "Colors"... Once I click on sampler instrument, Logic starts looking and gets lost.
I would really appreciate any input, what I should do. Re-Install Logic maybe? Looks like I have a "Logic" folder in the "overall" library as well as in my user library. Is this one too much?
Thank you in advance,
cheers
Joern
Hi Butterflys,
first of all thank you for the fast reply - it definitely helped me one step further as now the exs24 does load all MY instruments incl. the samples again. Fast and efficient.
But interesting side effect - now it doesn't load the factory instruments anymore. So at least 50% problem solved ... When I use the spotlight search function in the finder the samples are there, just not for Logic. I'll keep on trying...
(Ha, I could write another novel about re-authorizing 3rd party plug-ins or audio cards... such a hassle...)
Well, thanks a lot,
Joern
Similar Messages
-
What happened?... Can't find the songs... Vudu or blackout/magic
Hi, I must have had a blackout or so because iTunes all of a sudden can't find the music anymore... I dod put it on another drive and pointer to the new location a few months ago and it all seemed to be fine... until now. Does this happen to any of you out there? The preferences advanced option still seems to point to the place I had previously selected...
What to do? I pointed to one of the files in the hope that the iTunes brain would catch on, but no... Before I start experimenting with the risk of doing damage to the system and making things worse does anyone have any brilliant suggestions? Is there something I should do to prevent this from happen again?
Many thanks for any help. Have a good weekend.You've used the wrong name for the folder that holds the html page.
http://web.mac.com/artworksforyouth/iWeb/Site/Home.html
Is what it is trying to find (and it doesn't exist).
www.artworksforyouth.org redirects to www.artworksforyouth.com which then redirects to your iWeb page.
Rather than the word "Site" in your URL you need to use ArtWorks%20for%20Youth -
Where can I find the script for the sample table?
Hi,
Where can I find the script for the sample tables, like emp, dept, ... ?
Regards,
Rosalinehttp://otn.oracle.com/docs/products/oracle8i/doc_library/817_doc/appdev.817/a77069/preface.htm#420431
Hi,
Where can I find the script for the sample tables, like emp, dept, ... ?
Regards,
Rosaline -
Where can i find the sample instruments in logic pro x.the proper plugins
Where can i find the sample instruments in logic pro x.the proper plugins. or third party plugins too where can i find them and how in logic pro x can anyone help me please.
My understanding is that if it was purchased throught the App Store, then there is no requirement for a serial number. At which point does it ask you for the serial?
-
Where can I find the sample Issue Tracker application?
Where can I find the sample Issue tracker application?
Regards.Hi Maxim
Your version is for HTMLDB 1.5.
I found a (little bit) newer version for htmldb 1.6: http://htmldb.oracle.com/pls/otn/f?p=18326:7:14841698881447966533::::P7_ID:1184
But I don't testet it.
Greetings
Sven -
Where can I find the sample of screen of CRM-Maketing Campaign
Dear Sir,
Where can I find the screen of Marketing in CRM??
Because I need to do the presentation for CRM - Marketing
Thanks and best regards,
VimolCan you eplain a bit more? What exactly are you looking for?? is it campaigns, product proposals in webshop or marketing planner stuff within CRM??
-
Where can I find the phone menu icon used in the sample flyout menu tutorial?
Where can I find the phone menu icon used in the Muse phone menu flyout tutorial?
It is a .little box with an arrow on te left and three lines center/right.Hi
You can use the ones in Muse library :
http://muse.adobe.com/exchange-library/amphi-navigation-bars-by-qooqee-com-ali-pordeli
http://muse.adobe.com/exchange-library/harmony-animated-menu
Thanks,
Sanjit -
Just downloaded the latest version of iTunes, but can't find "Power Search" anymore to locate specific songs or artists quickly? "Browse" takes waaay too long. Any suggestions?
http://www.apple.com/feedback/kaywerty wrote:
A rather long winded way of asking if anybody knows if it's possible to have multi-windows open
It's not possible.
Suggestions here -> Apple Product feedback -
Can't find the manual setup anymore
Hi Community!
Yesterday I got myself a TC 2 TB for my MBP and PC setup. Everything went fine with the setup so far. The airport setup assistant guided me through to make my basic settings. Now I would like to make fine adjustments here and there. But when I open the Airport Utility now I can't find the assistant or the manual setup anymore. Where did it go? All I get is the cool graphic with the internet globe and my TC at the bottom. When I click on the TC I can edit, but not for example my printer for sharing over the TC and other configurations that were present during the initial setup.
How do I get the manual setup back?
Cheers, ZooberJust how do I get rid of the 6.0 version. I tried deleting it but a message said it is a utlity app and can't be deleted. I'm really sorry, I'm new to the Mac world.
Suggest that you leave it on your Mac and wait for further updates and improvements.
It is possible to delete the application, but you must use Terminal commands to do so. The Terminal is a scary place for most of us. Best to leave things alone.
You can keep both 5.6 and 6.0 on your Mac -
My computer can't find the Airport Express signals anymore
I'm having some weird issues with my MacBook connecting to my Airport Express at home. 2 years ago I installed my new Airport Express and made a WPA Personal security password as recommended. Everything worked fine until Sunday my computer seemed to not find the signals anymore. I have tried all types of problem solving from the book and other places, but nothing seemed to help.
The weird stuff is that my other 2 Mac computers have no problems connecting. The others the signals fine.
My computer picks up all other wireless signals from the neighborhood.
How can this be? I did nothing but turn my computer on and off and suddenly all "domestic signals" are non traceable any longer?
I hope someone can help me; I am, as you probably can understand not a computer literate exactly.I have to switch between my internet 2Wire network and the AX base station network I created.
If you configure the AirPort Express (AX) to join the wireless network provided by the 2wire you won't need to switch back and forth. There will only be one wireless network.
My husband wanted to print with his MacBook Pro the same way, and so we tried to configure the base station on his computer.
That was not needed. Once the base station is configured, any wireless client can join the network without needing to run any AirPort software. -
iPod: I clicked the eject button on the sidebar in itunes now I can not find the devices button or my iPod anymore in the iTunes side bar how do i find it again?.....Help!
You can use iTunes, connect iPod Touch to computer iTunes.
Select iPod Touch in iTunes under DEVICES (left panel)
Select Books tab (right panel near the top)
Deselect those books that you have read
Click Sync button (bottom right)
Have a read to get up to speed using iPod Touch
iPod touch User Guide (For iOS 5.0 Software) -
HT4208 Can't find the App Store app on my phone anymore
I can't find the App Store in my phone. I backed it up, downloaded new updates, reset, restored my phone. Went to sprint, Mac store no luck! Help
Look at past question and got it fixed!
-
"the system can't find the disk", but it's always connected without touching it! Can anyone help me?!
I tried to reset the ipod but I cannot syncronize the new music I added.
Could it be a problem of the songs or the ipod?Assumng you have a PC, start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
Where can we find the methods of the classes in OLE Interface
Hi All,
I am developing the code to download the file into multiple sheets of excel file.
got many links and sample codes from this forum.
but my doubt is where can we find the methods in applications.
Example:
add, cells, range etc are the methods in the object excel.application.
I want to find all other methods in this same object.
Please help me.
thanks in adv.
EswarHE,
see this demo program which is in DWDM
*& Report DEMOEXCELINTEGRATION *
INCLUDE rdemoexcelintegrationtop.
DATA: control TYPE REF TO i_oi_ole_container_control.
DATA: container TYPE REF TO cl_gui_custom_container.
DATA: link_server TYPE REF TO i_oi_link_server.
DATA: table_coll TYPE REF TO i_oi_table_collection.
DATA: retcode TYPE t_oi_ret_string,
document_type TYPE soi_document_type
VALUE soi_doctype_excel_chart,
document_format TYPE soi_document_type.
DATA: doc_url TYPE t_url.
DATA: usa_sales TYPE i VALUE 1000,
europe_sales TYPE i VALUE 2000,
japan_sales TYPE i VALUE 1000,
asia_sales TYPE i VALUE 100,
america_sales TYPE i VALUE 100,
africa_sales TYPE i VALUE 100.
DATA: total_sales TYPE i VALUE 0.
DATA: BEGIN OF test_line, region(50), sales TYPE i, END OF test_line.
DATA: test_table LIKE TABLE OF test_line.
DATA: wa_test_table LIKE test_line.
CLASS c_excel_document DEFINITION
CLASS c_excel_document DEFINITION.
PUBLIC SECTION.
DATA: proxy TYPE REF TO i_oi_document_proxy.
DATA: document_type TYPE soi_document_type.
DATA: data_table TYPE sbdst_content,
data_size TYPE i,
doc_url TYPE t_url.
METHODS: constructor
IMPORTING control TYPE REF TO i_oi_ole_container_control
document_type TYPE soi_document_type.
METHODS: on_close_document
FOR EVENT on_close_document OF i_oi_document_proxy
IMPORTING document_proxy has_changed.
METHODS: on_custom_event
FOR EVENT on_custom_event OF i_oi_document_proxy
IMPORTING document_proxy event_name param_count
param1 param2 param3.
METHODS: create_document
IMPORTING open_inplace TYPE c DEFAULT ' '
EXPORTING retcode TYPE t_oi_ret_string.
METHODS: open_document
IMPORTING open_inplace TYPE c DEFAULT ' '
open_readonly TYPE c DEFAULT ' '
EXPORTING retcode TYPE t_oi_ret_string.
METHODS: open_document_url
IMPORTING open_inplace TYPE c DEFAULT ' '
open_readonly TYPE c DEFAULT ' '
doc_url TYPE t_url DEFAULT ' '
EXPORTING retcode TYPE t_oi_ret_string.
METHODS: retrieve_document
IMPORTING documents TYPE document_list
EXPORTING document_format TYPE soi_document_type
doc_url TYPE t_url.
METHODS: close_document
IMPORTING do_save TYPE c DEFAULT ' '
RETURNING value(retcode) TYPE t_oi_ret_string.
PRIVATE SECTION.
DATA: control TYPE REF TO i_oi_ole_container_control.
ENDCLASS.
DATA: l_fcode LIKE fcode.
DATA: document TYPE REF TO c_excel_document.
DATA: bds_instance TYPE REF TO cl_bds_document_set.
*& Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
SET PF-STATUS 'MAIN0100'.
SET TITLEBAR '001'.
retcode = c_oi_errors=>ret_ok.
IF control IS INITIAL.
DATA: b_has_activex.
CALL FUNCTION 'GUI_HAS_ACTIVEX'
IMPORTING
return = b_has_activex.
IF b_has_activex IS INITIAL. MESSAGE e007. ENDIF.
CALL METHOD c_oi_ole_control_creator=>get_ole_container_control
IMPORTING control = control
retcode = retcode.
CALL METHOD c_oi_errors=>show_message
EXPORTING type = 'E'.
CREATE OBJECT container
EXPORTING container_name = 'CONTAINER'.
CALL METHOD control->init_control
EXPORTING r3_application_name =
'Demo' "#EC NOTEXT
inplace_enabled = 'X'
inplace_scroll_documents = 'X'
parent = container
register_on_close_event = 'X'
register_on_custom_event = 'X'
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message
EXPORTING type = 'E'.
CALL METHOD control->get_link_server
IMPORTING link_server = link_server
retcode = retcode.
CALL METHOD c_oi_errors=>show_message
EXPORTING type = 'E'.
CALL METHOD link_server->start_link_server
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message
EXPORTING type = 'E'.
CALL METHOD control->get_table_collection
IMPORTING table_collection = table_coll
retcode = retcode.
PERFORM refresh_sales.
CREATE OBJECT document
EXPORTING control = control
document_type = document_type.
CALL METHOD table_coll->add_table
EXPORTING table_name = 'SALES_IN'
table_type = table_coll->table_type_input
IMPORTING retcode = retcode
CHANGING data_table = test_table.
ENDIF.
IF bds_instance IS INITIAL.
CREATE OBJECT bds_instance.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
l_fcode = fcode.
CLEAR fcode.
CALL METHOD cl_gui_cfw=>dispatch.
CASE l_fcode.
WHEN 'EXIT'. "Zurück
IF NOT document IS INITIAL.
CALL METHOD document->close_document.
FREE document.
ENDIF.
IF NOT link_server IS INITIAL.
CALL METHOD link_server->stop_link_server
IMPORTING retcode = retcode.
FREE link_server.
ENDIF.
IF NOT table_coll IS INITIAL.
FREE table_coll.
ENDIF.
IF NOT control IS INITIAL.
CALL METHOD control->destroy_control
IMPORTING retcode = retcode.
FREE control.
ENDIF.
IF NOT bds_instance IS INITIAL.
FREE bds_instance.
ENDIF.
LEAVE TO SCREEN 0.
WHEN 'CREATE'.
IF NOT control IS INITIAL.
document->data_size = 0.
CLEAR document->data_table.
CALL METHOD document->create_document.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ENDIF.
WHEN 'SELECT'.
IF NOT control IS INITIAL.
DATA: documents TYPE document_list.
DATA: descr TYPE document_descr.
CLEAR documents.
descr-document_name = 'Car Sales Chart'(do1).
descr-document_id = 'DEMOEXCELCHART1'.
APPEND descr TO documents.
descr-document_name = 'Car Sales Chart 2'(do3).
descr-document_id = 'DEMOEXCELCHART2'.
APPEND descr TO documents.
descr-document_name = 'Car Sales Sheet'(do2).
descr-document_id = 'DEMOEXCELSHEET1'.
APPEND descr TO documents.
CLEAR doc_url.
CALL METHOD document->retrieve_document
EXPORTING documents = documents
IMPORTING document_format = document_format
doc_url = doc_url.
IF NOT doc_url IS INITIAL.
CALL METHOD document->close_document.
CALL METHOD document->open_document_url
EXPORTING open_inplace = 'X'
doc_url = doc_url
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ELSE.
MESSAGE e010.
ENDIF.
ENDIF.
WHEN 'OPEN'.
IF document->data_size NE 0.
IF NOT control IS INITIAL.
CALL METHOD document->open_document
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ENDIF.
ELSE.
MESSAGE e005.
ENDIF.
WHEN 'INPLACE'.
IF document->data_size NE 0.
IF NOT control IS INITIAL.
CALL METHOD document->open_document
EXPORTING open_inplace = 'X'
open_readonly = 'X'
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ENDIF.
ELSE.
MESSAGE e005.
ENDIF.
WHEN 'SAVEAS'.
IF NOT document IS INITIAL AND NOT document->proxy IS INITIAL.
CALL METHOD document->proxy->save_as
EXPORTING prompt_user = 'X'
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ELSE.
MESSAGE e000.
ENDIF.
WHEN 'CLOSE'.
IF NOT document IS INITIAL.
CALL METHOD document->close_document
EXPORTING do_save = 'X'.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ELSE.
MESSAGE e000.
ENDIF.
WHEN 'COPYLINK'.
IF NOT link_server IS INITIAL.
PERFORM refresh_sales.
CALL METHOD link_server->execute_copy_link_dialog
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ELSE.
MESSAGE e004.
ENDIF.
WHEN 'REFRESH'.
IF NOT link_server IS INITIAL.
PERFORM refresh_sales.
ELSE.
MESSAGE e004.
ENDIF.
IF NOT document IS INITIAL AND NOT document->proxy IS INITIAL.
CALL METHOD document->proxy->execute_macro
EXPORTING macro_string = 'R3StartupMacro'
param_count = 1
param1 = 10
IMPORTING retcode = retcode.
CHANGING retvalue = usa_sales.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ELSE.
MESSAGE e000.
ENDIF.
WHEN 'PRINT'.
IF NOT document IS INITIAL AND NOT document->proxy IS INITIAL.
CALL METHOD document->proxy->print_document
EXPORTING prompt_user = 'X'
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ELSE.
MESSAGE e000.
ENDIF.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
CLASS c_excel_document IMPLEMENTATION.
CLASS c_excel_document IMPLEMENTATION.
METHOD: constructor.
IMPORTING control TYPE REF TO i_oi_ole_container_control
document_type TYPE soi_document_type
me->control = control.
me->document_type = document_type.
ENDMETHOD.
METHOD create_document.
IMPORTING open_inplace TYPE c DEFAULT ' '
RETURNING value(retcode) TYPE t_oi_ret_string.
IF NOT proxy IS INITIAL.
CALL METHOD me->close_document.
ENDIF.
CALL METHOD control->get_document_proxy
EXPORTING document_type = document_type
IMPORTING document_proxy = proxy
retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
CALL METHOD proxy->create_document
EXPORTING create_view_data = 'X'
open_inplace = open_inplace
IMPORTING retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
SET HANDLER me->on_close_document FOR proxy.
SET HANDLER me->on_custom_event FOR proxy.
ENDMETHOD.
METHOD open_document.
IMPORTING open_inplace TYPE c DEFAULT ' '
open_readonly TYPE c DEFAULT ' '
RETURNING value(retcode) TYPE t_oi_ret_string.
IF NOT proxy IS INITIAL.
CALL METHOD me->close_document.
ENDIF.
CALL METHOD control->get_document_proxy
EXPORTING document_type = document_type
IMPORTING document_proxy = proxy
retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
CALL METHOD proxy->open_document_from_table
EXPORTING document_table = data_table
document_size = data_size
open_inplace = open_inplace
open_readonly = open_readonly
IMPORTING retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
SET HANDLER me->on_close_document FOR proxy.
SET HANDLER me->on_custom_event FOR proxy.
CALL METHOD proxy->update_document_links
EXPORTING update_manual_links = 'X'
IMPORTING retcode = retcode.
ENDMETHOD.
METHOD close_document.
IMPORTING do_save TYPE c DEFAULT ' '
RETURNING value(retcode) TYPE t_oi_ret_string.
DATA: is_closed TYPE i, has_changed TYPE i.
DATA: doc_url(256).
IF NOT proxy IS INITIAL.
CALL METHOD proxy->is_destroyed IMPORTING ret_value = is_closed.
IF is_closed IS INITIAL.
CALL METHOD proxy->close_document
EXPORTING do_save = do_save
IMPORTING has_changed = has_changed
retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
ENDIF.
IF NOT has_changed IS INITIAL.
CALL METHOD proxy->save_document_to_table
IMPORTING retcode = retcode
CHANGING document_table = data_table
document_size = data_size.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
ENDIF.
CALL METHOD proxy->release_document
IMPORTING retcode = retcode.
SET HANDLER me->on_close_document FOR proxy ACTIVATION ' '.
SET HANDLER me->on_custom_event FOR proxy ACTIVATION ' '.
ELSE.
retcode = c_oi_errors=>ret_document_not_open.
ENDIF.
ENDMETHOD.
METHOD open_document_url.
IMPORTING open_inplace TYPE c DEFAULT ' '
open_readonly TYPE c DEFAULT ' '
doc_url TYPE t_url DEFAULT ' '
RETURNING value(retcode) TYPE t_oi_ret_string.
IF NOT proxy IS INITIAL.
CALL METHOD me->close_document.
ENDIF.
CALL METHOD control->get_document_proxy
EXPORTING document_type = document_type
IMPORTING document_proxy = proxy
retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
me->doc_url = doc_url.
CALL METHOD proxy->open_document
EXPORTING document_url = doc_url
open_inplace = open_inplace
open_readonly = open_readonly
IMPORTING retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
Document shall also be available in ITAB for respective operations:
CALL METHOD proxy->save_document_to_table
IMPORTING retcode = retcode
CHANGING document_table = data_table
document_size = data_size.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
SET HANDLER me->on_close_document FOR proxy.
SET HANDLER me->on_custom_event FOR proxy.
CALL METHOD proxy->update_document_links
EXPORTING update_manual_links = 'X'
IMPORTING retcode = retcode.
ENDMETHOD.
METHOD retrieve_document.
importing documents type document_list
exporting document_format type soi_document_format
doc_url type t_url.
*----BDS-Data-Structures:--
Tables and WAs:
DATA: doc_signature TYPE sbdst_signature,
wa_doc_signature LIKE LINE OF doc_signature,
doc_components TYPE sbdst_components,
wa_doc_components LIKE LINE OF doc_components,
doc_properties TYPE sbdst_properties,
wa_doc_properties LIKE LINE OF doc_properties,
doc_uris TYPE sbdst_uri,
wa_doc_uris LIKE LINE OF doc_uris.
ID's:
DATA: doc_classname TYPE sbdst_classname VALUE 'SOFFICEINTEGRATION',
doc_classtype TYPE sbdst_classtype VALUE 'OT',
doc_object_key TYPE sbdst_object_key VALUE 'SOFFICEINTEGRATION',
doc_mimetype TYPE bapicompon-mimetype.
DATA: field_desc TYPE TABLE OF rsvbfidesc.
DATA: wa_field_desc TYPE rsvbfidesc.
DATA: l_nr LIKE sy-tabix.
CLEAR: field_desc, wa_field_desc.
wa_field_desc-fieldnum = 1.
wa_field_desc-display = 'X'.
APPEND wa_field_desc TO field_desc.
l_nr = 0.
CALL FUNCTION 'RS_VALUES_BOX'
EXPORTING
left_upper_col = 5
left_upper_row = 5
pagesize = 10
title = 'Select document'(sdc)
IMPORTING
linenumber = l_nr
TABLES
field_desc = field_desc
value_tab = documents
EXCEPTIONS
OTHERS = 1.
IF sy-subrc EQ 0 AND l_nr NE 0.
READ TABLE documents INDEX l_nr INTO descr.
IF sy-subrc EQ 0.
CLEAR: wa_doc_signature, wa_doc_components, wa_doc_uris.
CLEAR: doc_signature, doc_components, doc_uris.
wa_doc_signature-prop_name = 'DESCRIPTION'.
wa_doc_signature-prop_value = descr-document_id.
APPEND wa_doc_signature TO doc_signature.
CALL METHOD bds_instance->get_info
EXPORTING classname = doc_classname
classtype = doc_classtype
object_key = doc_object_key
CHANGING components = doc_components
signature = doc_signature
EXCEPTIONS nothing_found = 1
error_kpro = 2
internal_error = 3
parameter_error = 4
not_authorized = 5
not_allowed = 6.
IF sy-subrc NE 0 AND sy-subrc NE 1.
MESSAGE e016.
ENDIF.
IF sy-subrc = 1.
MESSAGE e017.
ENDIF.
CALL METHOD bds_instance->get_with_url
EXPORTING classname = doc_classname
classtype = doc_classtype
object_key = doc_object_key
CHANGING uris = doc_uris
signature = doc_signature
EXCEPTIONS nothing_found = 1
error_kpro = 2
internal_error = 3
parameter_error = 4
not_authorized = 5
not_allowed = 6.
IF sy-subrc NE 0 AND sy-subrc NE 1.
MESSAGE e016.
ENDIF.
IF sy-subrc = 1.
MESSAGE e017.
ENDIF.
READ TABLE doc_components INTO wa_doc_components INDEX 1.
READ TABLE doc_uris INTO wa_doc_uris INDEX 1.
doc_mimetype = wa_doc_components-mimetype.
doc_url = wa_doc_uris-uri.
CASE doc_mimetype.
WHEN 'application/x-rtf' OR 'text/rtf'.
document_format = soi_docformat_rtf.
WHEN 'application/x-oleobject'.
document_format = soi_docformat_compound.
WHEN 'text/plain'.
document_format = soi_docformat_text.
WHEN OTHERS.
document_format = soi_docformat_native.
ENDCASE.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD on_close_document.
FOR EVENT on_close_document OF c_oi_ole_container_control
IMPORTING document_proxy has_changed.
DATA: answer, do_save.
IF has_changed EQ 1.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
titlebar = 'Office Integration Demo'(oid)
text_question = 'Save Document?'(sav)
display_cancel_button = ' '
IMPORTING
answer = answer.
IF answer EQ '1'.
do_save = 'X'.
ELSE.
do_save = ' '.
ENDIF.
CALL METHOD me->close_document
EXPORTING do_save = do_save.
CALL METHOD c_oi_errors=>show_message
EXPORTING type = 'E'.
ENDIF.
ENDMETHOD.
METHOD on_custom_event.
FOR EVENT on_custom_event OF i_oi_document_proxy
IMPORTING document_proxy event_name param_count
param1 param2 param3.
IF event_name EQ 'ON_SERIES_CHANGE'.
CALL METHOD table_coll->get_table
EXPORTING table_name = 'SALES_IN'
IMPORTING retcode = retcode
CHANGING data_table = test_table.
CALL METHOD c_oi_errors=>show_message
EXPORTING type = 'E'.
CLEAR wa_test_table.
READ TABLE test_table INTO wa_test_table INDEX 1.
usa_sales = wa_test_table-sales.
CLEAR wa_test_table.
READ TABLE test_table INTO wa_test_table INDEX 2.
europe_sales = wa_test_table-sales.
CLEAR wa_test_table.
READ TABLE test_table INTO wa_test_table INDEX 3.
japan_sales = wa_test_table-sales.
CLEAR wa_test_table.
READ TABLE test_table INTO wa_test_table INDEX 4.
asia_sales = wa_test_table-sales.
CLEAR wa_test_table.
READ TABLE test_table INTO wa_test_table INDEX 5.
america_sales = wa_test_table-sales.
CLEAR wa_test_table.
READ TABLE test_table INTO wa_test_table INDEX 6.
africa_sales = wa_test_table-sales.
CLEAR wa_test_table.
ENDIF.
CALL METHOD control->set_focus.
ENDMETHOD.
ENDCLASS.
FORM refresh_sales.
FORM refresh_sales.
DATA: BEGIN OF item_line,
region(60),
sales TYPE i,
date TYPE d,
time TYPE t,
weight TYPE f,
amount TYPE p DECIMALS 3,
id(10) TYPE n,
END OF item_line.
DATA: sales_table LIKE TABLE OF item_line.
DATA: wa_sales_table LIKE item_line.
DATA: fields_table TYPE TABLE OF rfc_fields.
DATA: wa_fields_table TYPE rfc_fields.
DATA: ind TYPE i.
CALL FUNCTION 'DP_GET_FIELDS_FROM_TABLE'
TABLES
data = sales_table
fields = fields_table.
READ TABLE fields_table INDEX 1 INTO wa_fields_table.
wa_fields_table-fieldname = 'Region'."#EC NOTEXT
MODIFY fields_table FROM wa_fields_table INDEX 1.
CLEAR wa_fields_table.
READ TABLE fields_table INDEX 2 INTO wa_fields_table.
wa_fields_table-fieldname = 'Sales'. "#EC NOTEXT
MODIFY fields_table FROM wa_fields_table INDEX 2.
CLEAR: sales_table, wa_sales_table.
wa_sales_table-region = 'USA'(usa).
wa_sales_table-sales = usa_sales.
APPEND wa_sales_table TO sales_table.
CLEAR wa_sales_table.
wa_sales_table-region = 'Europe'(eur).
wa_sales_table-sales = europe_sales.
APPEND wa_sales_table TO sales_table.
CLEAR wa_sales_table.
wa_sales_table-region = 'Japan'(jap).
wa_sales_table-sales = japan_sales.
APPEND wa_sales_table TO sales_table.
CLEAR wa_sales_table.
wa_sales_table-region = 'Asia'(asi).
wa_sales_table-sales = asia_sales.
APPEND wa_sales_table TO sales_table.
CLEAR wa_sales_table.
wa_sales_table-region = 'America'(ame).
wa_sales_table-sales = america_sales.
APPEND wa_sales_table TO sales_table.
CLEAR wa_sales_table.
wa_sales_table-region = 'Africa'(afr).
wa_sales_table-sales = africa_sales.
APPEND wa_sales_table TO sales_table.
CLEAR wa_sales_table.
LOOP AT sales_table INTO wa_sales_table.
ind = sy-tabix.
wa_sales_table-date = sy-datum + ind.
wa_sales_table-time = sy-uzeit + ind.
wa_sales_table-weight = 100000 * ind.
wa_sales_table-amount = 11111 * ind.
wa_sales_table-id = ind.
MODIFY sales_table FROM wa_sales_table INDEX ind.
ENDLOOP.
CALL METHOD table_coll->add_table
EXPORTING table_name = 'SALES_OUT'
table_type = table_coll->table_type_output
IMPORTING retcode = retcode
CHANGING data_table = sales_table
fields_table = fields_table.
CALL METHOD link_server->add_table_item2
EXPORTING item_name = 'Sales' "#EC NOTEXT
item_title = 'Car Sales Figures'(sal)
IMPORTING retcode = retcode
CHANGING data_table = sales_table
fields_table = fields_table.
CALL METHOD link_server->add_string_item
EXPORTING item_name = 'ChartTitle'
item_title = 'Chart Title'(ti0)
item_value = 'Car Sales by Region'(ti1)
no_flush = 'X'
IMPORTING retcode = retcode.
CALL METHOD link_server->add_string_item
EXPORTING item_name = 'ColumnTitle1'
item_title = 'Column Title 1'(ti2)
item_value = 'Region'(ti3)
no_flush = 'X'
IMPORTING retcode = retcode.
CALL METHOD link_server->add_string_item
EXPORTING item_name = 'ColumnTitle2'
item_title = 'Column Title 2'(ti4)
item_value = 'Sold Cars'(ti5)
no_flush = ' '
IMPORTING retcode = retcode.
ENDFORM. -
Hi Gurus,
i am new to concept of BADI. Can any one present application/Use of BADI with an example . Can anyone tell me in which table or under which Tcode can I find the list of abailable BADI's ?
Regards,
NewAbaperHi Abaper user,
This will give the clear idea about the badi.
Go through this info.
just run this report u get badi
REPORT ZNEGI16 .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
DEFINING THE BADI
1) execute Tcode SE18.
2) Specify a definition Name : ZBADI_SPFLI
3) Press create
4) Choose the attribute tab. Specify short desc for badi.. and specify the type :
multiple use.
5) Choose the interface tab
6) Specify interface name: ZIF_EX_BADI_SPFLI and save.
7) Dbl clk on interface name to start class builder . specify a method name (name,
level, desc).
Method level desc
Linese;ection instance methos some desc
8) place the cursor on the method name desc its parameters to define the interface.
Parameter type refe field desc
I_carrid import spfli-carrid some
I_connid import spefi-connid some
9) save , check and activate adapter class proposed by system is
ZCL_IM_IM_LINESEL is genereated.
IMPLEMENTATION OF BADI DEFINITION
1) EXECUTE tcode se18.choose menuitem create from the implementation menubar.
2) Specify aname for implementation ZIM_LINESEL
3) Specify short desc.
4) Choose interface tab. System proposes a name fo the implementation class.
ZCL_IM_IMLINESEL which is already generarted.
5) Specify short desc for method
6) Dbl clk on method to insert code..(check the code in AAA).
7) Save , check and activate the code.
Some useful URL
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
Now write a sample program to use this badi method..
Look for BBB sample program.
AAA
data : wa_flights type sflight,
it_flights type table of sflight.
format color col_heading.
write:/ 'Flight info of:', i_carrid, i_connid.
format color col_normal.
select * from sflight
into corresponding fields of table it_flights
where carrid = i_carrid
and connid = i_connid.
loop at it_flights into wa_flights.
write:/ wa_flights-fldate,
wa_flights-planetype,
wa_flights-price currency wa_flights-currency,
wa_flights-seatsmax,
wa_flights-seatsocc.
endloop.
BBB
*& Report ZBADI_TEST *
REPORT ZBADI_TEST .
tables: spfli.
data: wa_spfli type spfli,
it_spfli type table of spfli with key carrid connid.
*Initialise the object of the interface.
data: exit_ref type ref to ZCL_IM_IM_LINESEL,
exit_ref1 type ref to ZIF_EX_BADISPFLI1.
selection-screen begin of block b1.
select-options: s_carr for spfli-carrid.
selection-screen end of block b1.
start-of-selection.
select * from spfli into corresponding fields of table it_spfli
where carrid in s_carr.
end-of-selection.
loop at it_spfli into wa_spfli.
write:/ wa_spfli-carrid,
wa_spfli-connid,
wa_spfli-cityfrom,
wa_spfli-deptime,
wa_spfli-arrtime.
hide: wa_spfli-carrid, wa_spfli-connid.
endloop.
at line-selection.
check not wa_spfli-carrid is initial.
create object exit_ref.
exit_ref1 = exit_ref.
call method exit_ref1->lineselection
EXPORTING
i_carrid = wa_spfli-carrid
i_connid = wa_spfli-connid.
clear wa_spfli.
Rewards somw points if it is helpful,
P.Nag
Rgds, -
How can I find the actual GPS coordinates of a photo?
IPhoto 11: for purposes of cross-referencing photos with physical samples (rocks, plants...) I want to be able to display (or otherwise discover) the actual GPS coordinates that iPhoto has imported with my still photos from Sony HDR-CX520V high definition video camera (GPS enabled). Can I find the coords within iPhoto?
I don't believe you can. I'm pretty sure that Graphic Coverter can do this.
Maybe you are looking for
-
Hi Gurus While doing the services, in purchase Req (me51n) the mov i select the K-COST CENTRE AND D-SERVICE i will get the service details in the i given activity number and i try to post the p.req im getting the cost-center menu. Here i want to cre
-
Dear, all. Excuse me for my english. I want to add document to record in scase.Document is a BUS2042. If i want to create it - i use method createFromData of this BO, but method uses operators like SWC_GET_ELEMENT CONTAINER and because of this i see
-
AccAD crontab jobs (scheduled tasks) - explained
/etc/crontab run-parts 01 * * * * root run-parts /etc/cron.hourly <-- every HH:01 02 4 * * * root run-parts /etc/cron.daily <-- every 04:02am 22 4 * * 0 root run-parts /etc/cron.weekly <-- every Sunday 04:22am 42 4 1 * * root r
-
When I started up the Server application, Profile Manager was not selected as expected. I selected it and started the first step of configuring Device Management in the Settings section. I entered the organization information and went on to the nex
-
My Illustrator order is not showing in my Creative Cloud Account. It's not in the products list not even in the orders history. I have received a confirmation e-mail 30 minuts ago with the order ID but I just can't start Illustrator. It keeps asking