Ext4 problem - ENOSPC bug

I get a serious number of error messages in /var/log/messages.log and they all look like this:
Apr 22 07:03:40 deskarch kernel: ext4: find_group_flex failed, fallback succeeded dir 2596
On boot up today I got 2000 such messages.
toad@deskarch 696\11 ~ > grep Apr\ 22 /var/log/messages.log | wc -l
2021
BUT
toad@deskarch 697\12 ~ > grep find_group_flex /var/log/messages.log | wc -l
70364
This log started on 18th April so there must be something funny going on here...
So far I have googled but no hits!?! If I find the time today I will investigate but would be more than grateful for a hint or two.
Last edited by toad (2009-04-22 05:35:00)

Upgrade your kernel. This should be in 2.6.29:
http://git.kernel.org/?p=linux/kernel/g … b594fb6156
http://git.kernel.org/?p=linux/kernel/g … 5cd84#l700
Which Arch has had since 9 April, I believe.
FYI, Arch doesn't seek out and pick up random patches like this to put in its kernel. We just package up the latest stable kernel released. If you look in any given kernel26 PKGBUILD, you won't see any patches included, other than something like aufs which is developed out-of-tree and has to be patched in.
Last edited by fphillips (2009-04-23 03:15:14)

Similar Messages

[SOLVED] EXT4 Data Corruption Bug Linux 3.6.2 & 3.6.3

Be careful
EXT4 Data Corruption Bug Hits Stable Linux Kernels
http://www.phoronix.com/scan.php?page=n … px=MTIxNDQ
https://lkml.org/lkml/2012/10/23/779
Edited: Removed the [ALERT] label.
Last edited by ontobelli (2012-11-01 04:58:43)

headkase wrote:
Even though it is a severe bug the chances of it happening to you are low. You have to unmount and immediately remount an EXT4 partition twice in a row for it to happen. On a normally operating system that is not a normal thing to happen. Just wait on your desktop for 5 minutes before rebooting again.
Arch, as a general rule, tends to stick as close to upstream as possible. I'm sure the devs are very competent people but a quick hack or branch revert has the possibility of introducing issues of its own. With the chance of the bug occurring low on a normally operating system I think it is better to wait for a fix from upstream.
Well maybe i am a bit over stressed about this since with this computer i have quite a lot of troube which i cannot find solutions to. Also a kernel panic after a reboot this morning -probably not related to this- got me in a bad mood.
Anyway.

Copy and paste adjustment problem/ possible bug.

Hi all
I have just encountered a very strange problem/ possible bug.
I have been working on a file in photoshop cs5 that had come from lightroom 5.3. This was then saved (automaticaly becomes tiff file in Lightroom). I then wanted to make some more adjustments to it in lightroom (using local adjustment clarity). I then tried to copy the settings of the adjustment brush from the tiff to the original raw file. This is where it gets very strange. The adjustments are copied but they are rotated ccw by 90 degrees! I can replicate this every time.
Could someone else try to see if this problem exists on their catalogs or if its a corrpution problem my end.

Noted on the bug, thanks.
1762hd wrote:
Hi Geoff
Heres the summary for bug report - please note this bug also affects radial filter/healing brush and crop
Scenario
1 open a portrait raw image in photoshop using render using lightroom (I am using cs5)
2 back in lightroom make a change using the - adjustment brush/ radial filter/healing brush or crop - to the newly created tiff image.
3 copy and paste this adjustment to the original raw file.
problem
all effects are rotated.

Problems with bugs in Adobe Creative Cloud for Mavericks users.

Ever since I downloaded Adobe Creative Cloud to my newly purchased macbook pro, there have been issues. I have the mavericks update and this seems to be the main problem. There is alot of small bugs that is really annoying when you come from Adobe CS5 where everything is working fine! Everything in between shortcuts like cmd + C, cmd+ z, v for black arrow and etc. Everytime I open any of the programs, I get the license agreement that i have to agree the terms of use on. Both InDesign, Illustrator, Photoshop and After Effects seems to have these. And when I contact Adobe support, they say that this is NOT a common problem. But on first try, googling it, I find that many have the same problems. So this isn't gonna be solved by reinstalling everything because there is something wrong with my mac. So when is adobe going to fix this? When After Effects wouldn't launch after the mavericks update, you guys came up with a solution pretty fast. Do this again please?

I don't have Flash installed. When I encounter video that is Flash only (getting rarer and rarer) I open Google Chrome on my Mac and watch it there.
That's the only reason I have Chrome on my Mac.

Problems and bugs with ios 8.0.2 on iphone 4s

After updating my 3 year old iphone 4s to ios 8.0.2, the UI became choppy (Same with ios 8 and ios 8.0.1). Few bugs i noticed even after updating to ios 8.0.2 (all done after restoring phone as factory new and loading few music/photos/videos loaded and few apps like manual cam, facebook and Google maps installed leaving 7.4 GB free memory.)
1. The "Notes" app keyboard responds slow while typing.
2. Free ram stays in between 60- 20mb which i checked with iMonitor which later drops down to 5-12mb when i open an app. So em just wondering where did the 450mb remaining ram went? Because of this i cant multitask like opening and running FB app and simultaneously opening Google maps or any other app using a bit more ram. In ios 7.1.2 i used to running three apps simultaneously without the app being reset.
3. Ram stays at 200mb+ when i exit some heavy apps like "manual cam" thou it never comes at 200mb when i exit in built apps which a very little ram. So in real world the ram is always being used at 80% even i restart the phone.
4. The incoming call screen is lagging. First i hear the ringtone for about .5 secs and then the call screen loads! ***?
From all this happenings i suspect that ios 8 and its further updates will use 80-90% of the iphone 4s ram leaving only 10-20% unusable for users! I dont know why 80-90% is still used even if i restart or even i have closed all the running apps! Usage comes down to 40-50% when i exit heavy apps like "manual cam" or "real racing 3" and the free amount of ram stays stable at 200+ mb for few hours until the cache or background processes resume after the phone refreshes after exiting the heavy apps. At 40-50% ram usage (soon i exit a heavy app) the phone works fluid and animations are smooth. Still my one question "where is my missing 400+ mb Apple"?

digis wrote:
If your device was not functioning, you might rant a little too!!
No, I wouldn't. At worst, I might sigh, then start troubleshooting the issue.
This is a technical support forum, not an emotional support forum.
What troubleshooting steps have you tried?
Here are some:
Basic Troubleshooting Steps when all else fails
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

Query of queries problem or bug

Hello Everyone,
I have used cfdirectory to get a list of files. As the result
I receive query with the files.
Then I want to search it using query of queries. I' ve found
a problem and I wonder if it is a bug of Coldfusion or perhaps
wrong usage of QoQ. The thing is that the files that I have are
using '_' and then are followed by number of week. It seems that
searching something like this '%_6' returns results *_*6. See
attached code.
Thanks for all answers in advance.

> I think you'll find "_" is a single-char wildcard when
used with the LIKE
> operator.
Found out how to escape it:
WHERE Name LIKE '%[_]6%'
I'm glad you brought this up... I didn't know about this
until I looked @
your issue. That's my new thing learned for the day: I can go
to the pub
now ;-)
Adam

Blackberry HUB "Show Read Filed Emails" ON AND OFF button SERIOUS Gmail PROBLEM NEED BUG FIX ASAP!

Its been for years (starting from 10OS Version 10.2 ) I couldn't see filed/labeled emails in my Z30/Z10 Blackberry HUB of my Gmail account, but I just downloaded Blackberry Blend and it started to show all my filed/labeled emails, but I still cant see them in my Blackberry HUB! Maybe you can tell me how to make Read Filed Emails visible in Blackberry HUB too?
Blackberry HUB >> Settings >> Display and Actions:
Show Read Filed Emails is ON
Show Sent Emails is ON
Both are turned on, but I still cant see them like on Blackberry Blend.. On search field then I type specific email from filed/label from my Gmail account I immediately finds it, but then I go back to Blackberry HUB all I can see just emails from inbox and single sent emails and YES "SYNC ALL EMAIL FOLDERS" IS SET TO ON AND "SYNC TIMEFRAME" IS SET TO FOREVER (''Sync All Email Folders'' is set ON and ''Sync Timeframe'' is set FOREVER).
Here is picture of email settings:
http://forums.crackberry.com/attachments/blackberry-10-os-f269/338662d1425451994-read-filed-messages...
I want to see all emails in devices Blackberry HUB like in Blackberry Blend desktop! What should I do to make it happen?
I find out that then I click on the Blackberry HUB > Settings > Display and Actions: "Show Read Filed Emails" to ON or OFF again and again, view in Blackberry Blend immediately changes in order I did ON or OFF, that's pretty amazing, but Blackberry HUB DOESN'T RESPOND AT ALL! View is the same doesn't matter if I change it ON or OFF.
View in Blackberry Blend starts to look the same like in phones Blackberry HUB then I click "Show Read Filed Emails" OFF, it looks like Blackberry HUB doesn't respond to ''Show Read Filed Emails'' ON and OFF button at all, ITS ALWAYS OFF! What should I do next??
I'm using Blackberry Z30, but I have Z10 too and it also doesn't work and it looks like this "Show Read Filed Emails" not working button bug is on all 10 OS devices except Blackberry Blend desktop version which works perfectly confirms it.
I'm using Gmail and I have latest Blackberry 10 OS version OFFICIAL 10.3.1.1565
Here is a picture how it looks then ''Show Read Filed Emails'' ON and OFF:
(first is OFF, second is ON)
http://forums.crackberry.com/attachments/blackberry-10-os-f269/338513d1425416890-read-filed-messages...
As you can see then ''Show Read Filed Emails'' is ON, Blackberry Blend changes and I can see all my emails (and there are a lot of unread ones! (sorry I blurred some of my emails for privacy)), but in my devices Blackberry HUB there is no changes and its displaying the same thing like ''Show Read Filed Emails'' was OFF. I miss a lot of emails and its really annoying and I think you understand why.. Blackberry Blend desktop version is a savior today, but THIS IS NOT A SOLUTION!
Any FIX suggestions ASAP?
UPDATE:
I tried a lot of times to delete and sign in again and again, but it looks like only Blackberry Blend respond to every setting changes! Blackberry HUB doesn't respond AT ALL! Devices Blackberry HUB only show INBOX and SENT MESSAGES all the time, but if "Display Style" in Blackberry HUB is set to "Conversation" SENT MESSAGES disappear from devices Blackberry HUB too (in Blackberry Blend is everything FINE!) if they are part of CONVERSATION FILED/LABELS EMAILS!!
All issues I been searching all this years and everyone was blaming Gmail, but it looks like ALL THIS YEARS THIS WAS Blackberry HUB "Show Read Filed Emails" ON and OFF button BUG/PROBLEM which doesn't work on devices Blackberry HUB and today Blackberry Blend desktop version CONFIRMS IT!!
Yes Yahoo accounts FILED/LABELS EMAILS with devices Blackberry HUB works FINE, but Gmail - NOT and NEED FIX ASAP!

Newest edits in here:
http://forums.crackberry.com/general-blackberry-discussion-f2/please-send-very-important-10os-device...
100% FIX SOLUTION GUARANTEE for Gmail archived/labeled Emails not showing problem!
How to fix it? FIX "Show Read Filed Emails" button to respond to ON and OFF devices Blackberry HUB for Gmail accounts - NOW IT IS ALWAYS OFF if you press ON or OFF!
"Show Read Filed Emails" button ON and OFF for Gmail account works on Blackberry Blend desktop version!
Error/Bug: Blackberry HUB do not show Gmail labeled emails
Main problem: Blackberry HUB "Show Read Filed Emails" button doesn't respond to ON AND OFF and is always OFF fo Gmail account.
Main problem: ALL Blackberry 10OS devices Blackberry HUB"Show Read Filed Emails" button ON AND OFF doesnt respond with Gmail accounts!
Works with: Blackberry Blend desktop version responds to "Show Read Filed Emails" button ON AND OFF with Gmail accounts! (pressing "Show Read Filed Emails" button ON and OFF again and again, view in Blackberry Blend immediately changes in order you press ON or OFF, but Blackberry HUB is always on OFF)
"Show Read Filed Emails" button doesn't work with: Gmail accounts
Status: NOT FIXED!
OS version: Blackberry 10 OS version OFFICIAL 10.3.1.1565
PROBLEM FOUND!
I created new Gmail account send 5 test emails and made first 2 test emails labeled and made step by step set up on my Blackberry 10OS device to confirm this ''Show Read Filed Emails'' button BUG/PROBLEM/ERROR:
1. I signed in with my Blackberry 10OS device like this:
http://forums.crackberry.com/attachments/blackberry-10-os-f269/338846d1425503380t-gmail-archived-lab...
2. When I set on Gmail account settings "Sync Timeframe" is set to FOREVER and "Sync All Emails Folders" is set to ON
http://forums.crackberry.com/attachments/blackberry-10-os-f269/338847d1425503392t-gmail-archived-lab...
3. And at last I go to devices Blackberry HUB and see this:
http://forums.crackberry.com/attachments/blackberry-10-os-f269/338856d1425505143t-gmail-archived-lab...
As you can see it doesn't matter if "Show Read Filed Emails" button is set to ON or OFF, Blackberry HUB doesnt respond at all, but Blackberry Blend view changes at same second then I press.
CONCLUSION: "Show Read Filed Emails" button ON and OFF BUG/PROBLEM/ERROR for Gmail accounts is confirmed and it STILL NOT FIXED!
Please spread the word to people who have all the power to influence and accelerate processes to FIX this VERY SERIOUS ISSUE or please tell me there could I send this FIX SOLUTION to to get fastest respond and get it FIXED ASAP. THANK YOU!
STILL NO FIX!

Acrobat X Scanning Cancelled Problem / WORKAROUND / BUG REPORT

As you have read in other threads, Acrobat X on Windows has a serious scanning problem with HP and possibly other scanners.
Whereas in Acrobat 9 scanning worked reasonably well, Acrobat X seems to be unable to cope with scanning documents from the flat bed of a multifunction scanner.
So, if you are scanning from the feeder, scanning works, but if you are scanning from the flatbed, you will get a brief pause and the phrase SCANNING CANCELLED.
This is, of course, not acceptable.
The problem is that Acrobat X does not play nicely with the scanner drivers. Previously, Acrobat 9 would "auto-detect" the source of a document, using the feeder if loaded, and "falling back" to the flatbed otherwise. However, Acrobat X does not fall back. If there is nothing loaded in the document feeder, the scan will be cancelled by Acrobat X.
The workaround - and I would NOT call this a "solution" - is to use only the "Custom Scan" command from Acrobat X. When the window pops up, choose the "Options" button and select "Native Mode" and "Show Scanner's Native Interface" from the two menus. (Acrobat X does seem to remember these settings at least within a session, so if you're scanning multiple documents you only need to do this once.) Then scan.
You will see a new window pop up - the scanner's "native interface." On my computer, this window shows up BEHIND the Acrobat X screen (annoyingly) so you have to watch for it and click forward. Be sure to select "flat bed" from the "document source" menu. On my computer, this setting is NOT remembered between scans, so you have to do this for EVERY SCAN. Then, the document will scan, and you can do what you want with it in Acrobat X.
Needless to say, this is a long, painful, slow process, especially if you're scanning lots of flatbed items, as I do. Hence it's a "workaround" and NOT a "solution".
The SOLUTION will be for Adobe to FIX this. ADOBE: THIS IS A BUG REPORT. PLEASE LOG THIS IN AND FIX IT. Acrobat 9 with CS5 worked perfectly, as did Acrobat 8 before it. Moving to CS5.5 with Acrobat X broke this. Sloppy. Please fix! Thank you!
Glen Barney

I used your workaround (thank you!) but it was very annoying. Although I set up the options for a single multi-page document, Adobe gave me separate files and I had to consolidate them. I also had to fill out the options (color, flatbed vs feeder) for each page. This function was working for me at some point, so I don't know what happened to make my HP Multifunction and Adobe part ways. I hope Adobe comes up with a successful patch for this problem.

DIV STYLE Region layout problem. Bug?

Hi guys, I believe this is a bug but need clarification.
I have created some regions based on the html code:
div style="border: 1px solid rgb(153, 153, 153); height:300px; width:970px; overflow:auto;">#BODY# /div
Now, this works fine, in the region I have a standard report. The propblem is when I open a NEW browser window, any website. Then go back to the page, a huge gap appears between the region this code is in, and the previous region.
I am using IE7 and Apex 3.0.1
Any help?
Thanks
Sam
Message was edited by:
Spam
Message was edited by:
Spam
Message was edited by:
Spam

I wouldn't see that as a problem, as this is the use case described in the overflow spec: "...This avoids any problem with scrollbars appearing and disappearing in a dynamic environment."
If it is that important, can you control sending "overflow: hidden" or "overflow: scroll" depending on the number of rows, using ApEx mechanisms and conditional comments?

Nokia N8 CPU Problem? Bug? Glitch? Please read!!

Hi there, I just discovered a... problem? or a bug? a glitch? whatever. I discovered a problem on my Nokia N8 about it's CPU speed.. I accidentally saw on the application X-plore that my N8's CPU is set to just only 192 MHz! I was schocked when I saw that since the CPU of Nokia N8 is said to be at 680 MHz. I rebooted my N8 to refresh it. After I rebooted my N8, I did not run any app and started X-plore right away and check it again. To my surprise, it's still set at 192 MHz. So I posted about this thing on a forum and asked if it's the same as their N8's. So someone replied and said his N8 was also set at that speed. So I started to worry.
Other Nokia N8 users please also check yours. All you have to do is install X-plore, just find it over Google.
Attachments:
Scr000022.jpg ‏40 KB

shakivrizvi wrote:
Battery definitely comes first. But it doesn't mean it has to be 2 days standby time when processor speed is not enough to process mail or starting cam. Think how superior Nokia will be if battery life is a bit below this with a better processor speed.
If you asks to anroid lover or iphone lover what will come first in their are processor speed & phone material quality, where Nokia both falls behind. Though all other options are still great than iphone or anroids.
hmmmm.
My Sister had the HTC Desire when it can out. And though she loved the phone, she couldn't stand the fact that when she went out with it, not only did she have to think about where she could charge it, but also had to carry a micro USB cable to work just for that purpose too.
She's since upgraded to the Galaxy S, and though the phone is much snappier and brighter, her main wow factor was............." at least I don't have to carry the USB lead anymore!!"
So in my estimation, I can live my so called "mediocre" Symbian^3 N8 speed phone, than the worlds fastest dual, triple or quad core phone which will no doubt have only half the life anyway.
Jurassic Park, Sam Neill to Dickie Attenborough " Mr. Hammond, the phones are working !"
N8-00 Tesco UK 059C951, Lumia 920

All_mview_comments - Permission problem or bug?

Hi folks. I have some materialized views with comments on them. As a DBA or the schema user, I can do a SELECT * FROM all_mview_comments and see all the materialized views and comments.
I have a regular user account which belongs to my user role. The user role has select permission on all the materialized views of the schema in question. The user can select from this table and work with it normally. However, when performing a SELECT * FROM all_mview_comments, now rows selected is returned.
If I grant select on the materialized view to the user himself (not the role), then all_mview_comments will return records.
I also have comments on tables and views, the regular user can view these just fine (via the permissions granted to the user role).
Is this an Oracle bug, or am I doing something wrong here? I'm not looking forward to having to grant permissions directly to each user rather than the role.

I noticed that the hibernate-script pkg in the current arch pkglist it's old of date, so I used the new hibernate_script into tuxonice website, and this problem seems to be solved. Can this pkg take the place of the old pkg in the current repository?
Regarding tuxonice kernel, seems to be a problem with the initrd image. Because if you want to use a initrd image with this kernel, for resume it you insert this line:
echo 1 > /sys/power/tuxonice/do_resume
in your rc.sysinit but it creates some problems....
Now I try to use tuxonice kernel without initrd image

Is there a problem or bug in locking video clips together?

Hi, I have 3 movie tracks masked with one track underneath all 3 for a total of 4 movie tracks. I seem to be having a problem locking down the 4 video layers so things "added" into my masks match up with the main video track outside the mask(s). I've tried using guides and grids and when I get the center point circular X on the yellow t-bar for all 4 lined up, I click on these 4 tracks and use the object lock feature (in the object menu), but it doesn't seem to "lock" for the duration of my entire edit, which is about 2000 frames.
Any idea what I'm doing wrong?
rita

Hi Kim,
There have never been any reports of bugs or problems with our serial communication VI's with the specific ASCII character "i". Also no reports about that character in general.
1. All the serial VI's are based on VISA, so you can always make sure that you have the latest VISA driver from our website:
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0E91?opendocument&node=132060_US
2.You say that you have version 6.0? Did you install the 6.0.2 patch? If not, that would be a good idea too. There were some problems with String and Array functions that got fixed.
Download the patch from this link:
http://digital.ni.com/softlib.nsf/websearch/168AAE428563A9E8862569EC005C5856?OpenDocument&node=132070_US
3. What do yo
u mean with "the serial ASCII output is giving you problems"? What kind of problems? What do you mean with bad lookup? What LabVIEW functions do you use? You need to be more specific.
4. If this is a serial issue,.. Do you have the same problem when doing a serial loopback test with the letter i? Try with the specific ASCII code or just with a normal string.
5. Can you attach a little program that reproduces the problem on your MAC? Please also send specific information about your OS, installed software,...
Regards.
Joris Vanderschrick
Applications Engineer
NI Belgium

Random iTunes library problem or bug with duplicates

iTunes (Mac) spontaneously creates duplicate songs and does some unusual things in the process. The duplicate songs only appear in my library, the music media remains intact most of the time. Sometimes iTunes moves one or two songs from the same recording to a separate folder and puts in outside the iTunes Media folder.
The duplicate songs that appear in the library appear randomly. Sometimes both dup songs play fine, even though there is only one source file for the song. Sometimes only one plays, so I have to delete the one with the exclamation mark. Often one of the 2 dup songs has the wrong artwork. This wouldn't be a big issue if I didn't have such a large volume of music and this wasn't happening to hundreds and hundreds of songs, which need to be dealt with manually one at a time.
I have several music folders (CD , Downloads) inside the Master iTunes Media folder on the ext HD
In iTunes Perfs I have enabled "Keep iTunes Media folder organized" and "Copy files to iTunes Media folder." This setup worked fine in the past, before 2010.
I've repaired permissions regularly and have repaired the Boot HD.
I first starting noticing this problem at some point in 2010 while using iTunes 9. Upgrading to iTunes 10 has not helped.
Any ideas on what's going on or what I might try to fix the problem?
Is this a bug in iTunes?
If I re-installed iTunes and could return to an earlier version which one should I use ?
Specs. iTunes 10.3.1 with 350 GB of music on an external HD

Thanks for taking the time to respond to my question.
I need some clarification on your instructions. Once I have Exported my Library to the desktop and moved my iTunes folder to the desktop I can't proceed as you suggest.
When I open iTunes it opens the original library full of all my music. If I launch iTunes (while holding down C key) I can create a new empty iTunes Library inside the Music folder.
If I try to import (open) the original Library.xml file on the desktop nothing happens. If your saying I need to import all the music in my iTunes folder (inside the Music folder) I can't do that since all my music is on an external HD.
Are you saying I need to reimport the entire contents (all the music) in my iTunes Media folder?
I thought your solution was aiming to simply rebuild the directory structure while leaving the original music media alone.
Thanks for helping clarify.
Or could you point me to a support.apple.com/kb article?

JavaFX problem or bug. Please help!

Hello.
I have a problem with javaFX, probably it's a bug of netbeans.
If i develop a mobile apllication on javafx platform, using netbeans 6.9.1 IDE, i can't install the application on my HTC TouchViva (Running windows Mobile 6.1).
Netbeans 6.9.1 uses JavaFx 1.3.
Javafx platform for windows mobile the latest is 1.2.
If i develop a mobile application on javafx netbeans 6.8 (using javafx 1.2.3 SDK), the application is running well on my mobile.
Can somebody give me a solution, to run the application developed in netbeans 6.9.1 on javafx1.2 platform? Or should i change the phone?
Thanx
Best regards,
tolvaly

The JavaFX 1.3 runtime is not released for Windows Mobile yet, so you must compile with JavaFX 1.2 sdk. I'm not sure if Netbeans 6.9.1 still supports JavaFX 1.2, if it is posible (but I think it is not), you should change the JavaFX platform to 1.2 in project properties. The easiest way is to keep on developing with Netbeans 6.8 which supports 1.2

Problem or bug ? Photoshop - pen tablet- mask- help :(

Hi, iv got a big problem or a simply bug :s with photoshop cs4 and my pen tablet wacom bamboo. I link three screenshots: A screen with a line made with the mouse ==> everything is normal
A screen makes the pen ==> we can see that, this mask be created with the form.
A screen just after use the pen ==> form disappeared and history line shows: "activation of a mask Oo"
http://imageshack.us/photo/my-images/80 ... uris1.jpg/
http://imageshack.us/photo/my-images/146/stylet.jpg/
http://imageshack.us/photo/my-images/6/ ... tivoo.jpg/ Help me please, i cant use the pen normally, my created form or line disappeared everytime Thanks for your answers !

Have you read that?
http://forum.wacom.eu/viewtopic.php?f=10&t=14722

Ext4 problem - ENOSPC bug

Similar Messages

Maybe you are looking for