Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except join not extend and I can not get a network on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Rout/
Extend Wireless Network using a Telstra technicolor Gateway wireless Router to Airpot extreme but Airport will only except "join a wireless network (which it does) not "extend a wireless network" (Led turns yellow and I can not get a network working on the Airpor Extreme ethernet ports but can ping Airport extreme from Technicolor Router.
Airport gets it address DHCP.
Funny how I can ping the Extreme but the Hard Ethernet ports dont seem to work correctly.
When the AirPort Extreme is configured to "Join" a wireless network, the Ethernet ports are not enabled.
Oddly, the AirPort Express has a special feature that will allow it to to "Join" virtually any wireless network.....and the Ethernet port can be enabled. So, an Express would work for your purpose to provide an Ethernet connection to the media player. This assumes that the Express is located where it can receive a strong wireless signal from your main router.
Note that the Express will not provide any additional wireless coverage when it "Joins".
Similar Messages
-
HT201441 I can't get a hold of the previous owners iCloud how else can i erase the account
I can't get a hold of the previous owners iCloud account or Apple ID ,how else can I erase his account so I could activate my phone
So after hitting "Delete" for the second time (which I did not do because I did not want to delete my account) it asks for a password?
Can't the phone just be reset back to factory?
Settings>General>Reset>[choose your option]
or
Reset throught the iTunes you will be syncing with? -
HT4993 I can't get sprint voicemail on the iphone. It shows but won't play.
My Sprint voicemail shows as visual voicemail, but won't make a sound. I have consulted a phone vendor at Walmart and the Apple Store "Genius Bar", and I called Sprint. Each time they reset it, but it won't work afterward. Help!
have you tried a reset, hold down the home/power button together until you see the apple logo and then release, then wait for you phone to boot back up.
-
How can i get iphoto to show the albums i have so i can download just one album
I recently have gotten a macbook and i need to free up some space on my iphone. I have an album that i would like to import without importing my camera roll. How do i do that?
When you connect your iPhone to your MacBook you can import selectively from your Phone. Are you using iPhoto on your Mac? iPhotodoes not see the albums on your phone, but when you select the phone in iPhoto's source list and see the images in the Camera Roll, select the ones you want and then click the "Import selected" button.
Regards
Léonie -
I have a MacBook Pro and all of a sudden I cannot get wireless internet connectivity to my router or any other router, I get connectivity through the ethernet port but not wireless. This was working well till this morning
BXB1905 wrote:
I tried the Apple diagnostics it did not work.
What do you mean it did not work! What were the results of the diagnostic tests?
Have you contacted your ISP to determine if the problem is on their end?
Have you changed your router channel? Sometimes this resolves wireless problems.
Your profile confirms you are using Lion. Check out the following:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Configuring 802.1X in Mac OS X Lion and Later -
WHEN I USED TO CONNECT INTERNET FROM MY IPHONE 4S PERSONAL HOTSPOT VIA USB, AN ICON IN THE NETWORK PREFERENCE NAMED "IPHONE" APPEARS.... BUT NOW THIS IS NOT HAPPENING AND I AM NOT ABLE TO CONNECT PERSONAL HOTSPOT VIA USB CABLE. PLEASE HELP ME OUT???
Please don't shout! Using all uppercase means shouting on the internet. If your keyboard is stuck please say so, otherwise people will think you are being obnoxious.
Now the first question is, when you are saying connecting to personal hotspot, have you always been using the iPhone to connect to the internet? Are you someplace where the only place to connect is available via tethering to the iPhone's celluar network? Or do you have other options? -
I have a new MAC MINI and I want to install a second monitor. I have one connected to the HDMI and it works. I can't get a signal to the other one. It is connected from the thunderbolt to its HDMI port. How can I make it work?
Could be a bad cable or bad Thunderbolt port.
You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
You can also make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
how can I get netflix streaming audio, the video is fine but the audio coming through is from the TV(dish)
It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?
-
I have an apple tv 3 but when i use Home Sharing from my Windows Laptop the Apple TV shows all my music on the TV but it will only play 1 or 2 songs and then stops!!! Annoying, so I have to re-start iTunes on my Laptop and it will play 1 or 2 more songs then stops again!!! still annoying.
Can anyone assist me with this issue?
ThanksTo downgrade, you'll need to download the previous software version here: ATV3 http://appldnld.apple.com/AppleTV/041-4361.20120605.grjot/AppleTV3,1_5.0.2_9B830 _Restore.ipsw
ATV2: http://appldnld.apple.com/AppleTV/041-4362.20120605.t8i4U/AppleTV2,1_5.0.2_9B830 _Restore.ipsw
Next, plug the Apple TV into your computer with a micro-usb cable (most phones today use these) and start up Itunes. It should detect the Apple TV in recovery.
After that, hold down Option on Apple or Alt on Windows and click Restore. This should open a window that allows you to select the software update you want to apply. Select the one you downloaded earlier.
It will then go through the restore process, which takes only a few minutes, and then you will be able to plug the Apple TV back in to your display and set it up again.
I recently ran into a similar issue with a bunch of these things and after restoring them all to the previous software version they are working again. -
Photos tells me it is connecting to Library for shared photos. It's been saying this for about ten hours. I can't stop it from searching or get it to do anything else. I can go back to my photos but I can't get Photos to find the shared items.
Be sure Safari does not have the Block Pop-Up Windows preference set.
Where I work now there are several unencrypted VLANs that require authentication, and Safari promptly pops up a window for me to register every time. -
i upgraded from 4S to Iphone 5 but i lost all my messages how can i get them back on the new device ?i did back up using the icloud ?
having said that i have an i pad as well and when i backed up i got the contacts which are on the i pad on my new iphone 5 not the ones who were on
i phone 4s ...
any one can advise me please what to do to get my stuff from iphone 4s to iphone 5 ,rather than the stuff from my ipad ?If you made a backup using icloud, then restore your 5 to that backup. http://support.apple.com/kb/HT4859
-
I connected the rocketfish mini display port but am only able to have audio through my computer. I was able to successfully drag the video to the tv. What can I do to hear through the tv?
I HAVE T.V VOLUME!!! Thank you sooooo much eww. I was on my way thinking I would have to buy yet another type of cable. : ) Again thanks!!!
-
play a song from itunes? it will show the art work then skip three or four songs and start playing! How can I get it to play the songs I touch? This is a new phone but has been restored from backup. Not even all my icloud music is showing
Hi amorg1876,
If your iPhone is skipping over certain songs, you may want to check out this article:
Troubleshooting songs that skip
http://support.apple.com/kb/TS3217
Cheers!
- Ari -
Hi, I upgraded from iOS 5.1.1, to iOS 6, and it's ridiculously slow, I can't sync to my computer, (manually manage music), and all of my photos were gone. How can I get my photos back? It says restoring photos, but it's said that for two days now!
It just does't sync. I connect it to itunes, but nothing happens. Where it says how much space I have, it's just on ebig bar that says other. I can play my music on itunes, but not when i unplug it.
All of my photos were gone, i took and saved them with my ipod.
The photo app is saying restoring.
What should i do? -
Using Mac OSX 10.7.1: recently replaced our DSL modum and wireless router, suddenly I can't get some web sites to load. Many do, but Twitter and others often do not. I've reset the browsing history, forms, cookies and cache but it continues to happen.
Ok, first thing, why are you doing anything with WAMP or XAMPP when you're running a Mac? MAMP should be what you want unless you're not explaining part of what you are trying to do.
2nd thing, I haven't used MAMP in a while, but there are two possibilities for not seeing what you want to see once you have MAMP turned on. One possibility is that you already have "Web Sharing" turned on in your Sharing Preference Pane. If that is the case, port 80 will already be taken and you'll be seeing the default Apache install (files are stored at /Library/WebServer/Documents/). This would push MAMP to either not turn on it's web serving capabilities, or to push it to another port. The other possibility is that MAMP defaults to another port anyway. So instead of localhost, you might have to type in localhost:8080 or something similar. I believe the control panel that gets installed can take you to the currently MAMP-served page, and it can also help you change which port your serving on.
80 is the default port for web serving and the ONLY port that will let you get straight to the server without having to type in webaddress.com:port# instead of just webaddress.com.
Maybe you are looking for
-
Upload excel file not working with FM "HR_KR_XSTRING_TO_STRING"
Hi Colleague, Can you let me know if there is any other Function module which can be used to upload an Excel file, as the FM "HR_KR_XSTRING_TO_STRING" is not existing in GTE system. It would be great if you provide the link which explains on how to
-
Dear all, My customer is using BPEL 11g for current project. They have a legacy user database (Oracle DB 11g) which store all accounts info. Now we want to connect BPEL with this database as identity service and pick up the users and groups as approv
-
German umlauts :Sender File Adapter
Hi, I am trying to configure Sender File adapter,but it is not working properly for German umlauts. I have tried encoding UTF-8, UTF-16, ISO-8859-1,ISO-8859-2, ISO-8859-5 but none of them are working. Can anyone please help me out in this. Thanks a l
-
X11 and open source ATI drivers
Hi. Well I have a little(big) broblem. I have ATI Radeon x1600 video card, and I need open source video drivers (not fglrx). I installed it by the article at archlinux wiki: Open Source ATI Drivers The open source drivers will work to some degree on
-
Photoshop CS, lost "license configuration data"
Photoshop CS question. Has anyone ever suddenly lost their "license configuration data"? I get this error when I start up Photoshop: "The license configuration data for Adobe Photoshop is no longer usable". I click "OK" and it takes me to the activat