Extended Notification not working for Dialog Task with agent assignment

Hi Friends,
I have an issue where I have a user decision step and a sub workflow contains a dialog task with agent assignment.
Extended notification is configured properly and is working properly for user decision step but its not working for the dialog task created as an activity.
Batch jobs are configured to run report SWN_SELSEN.
I was checking SDN and found this discussion handy :
http://help.sap.com/saphelp_nw73ehp1/helpdata/en/4f/3bed495cc018c8e10000000a42189e/content.htm
One thing that wonders me is that notifications show up in SOST 4-5 seconds before the user decision step starts execution.
See screenshot from SOST and WF log.
SOST log :
2 questions here: Why is notification not being sent for Dialog task?
                          Why is user decision notification being sent that early even before the User decision task starts execution?
Please provide your valuable inputs.
Regards,
Sandip

An activity step with agents is supported by the extended notifications if it is a decision task or not, I have used it many times and it works well just no approval/rejection links if it's not a decision task.
From your screenshot you can see that a mail has been created and is found in SOST, usually this cases are problems with the mail server or connection to it, check the mail settings in the SMTP node in transaction SCOT, also check with mail server team if there is a block to/from the SAP server.

Similar Messages

  • Voicemail notifications not working for iphone 4s

    voicemail notifications not working for iphone 4s

    I had the same problem and after a lot of research here and on Verizon I finally discovered that it was an app named Onavo Extend that was preventing my voicemail from working. Other people have had success resetting their phone or network settings, disabling and reenabling SIRI, or deleting the Neilsen app (which I didn't have)  but those options didn't work for me. A lot of mods have claimed that this is not an Apple problem but if it is caused by an app that Apple allows to be sold in their app store, then it is an Apple problem, not a carrier problem. Of course, sometimes its just an ID 10 T problem.

  • Activesync not working for Windows Phone with certificate

    We have a new Exchange Server 2013 setup and using activesync.  We have setup a policy to require simple password and to send an email to provision a device when it connects.  Activesync is setup to use self signed certificates,  this was
    tested first on the Ipad.  Certificate installed entered the settings and the device appeared in the quarantined devices list awaiting to be approved.  This was also done on the Iphone and worked. 
    When putting the same certificate on the windows phone device it errored with there is a problem with {as.domain-name.net} and does not appear in quarantined devices screen.
    I tested again with another Ipad and an android device and they work without an issue.  Tested with a Windows RT device and got the same issue.  If I look in the IIS log files I can see the windows device making a connection then when I presume
    to be the error 500 at the end of the line. 
    This is not a user issue as I can use the same user on the various devices.  The windows devices just do not want to connect.  We have looked at the certificate but if it works for apple and android devices why does it not work for windows? 
    Is there any additional security settings that need to be turned on or off for windows phones?  Is there something specific on the certificate what windows devices need that others ignore?

    I did inital think it might be a widows phone issue but there are no other settings for me to use.  I have also tested using a windows 8 surface and I get the same issue.
    I have raised the event log level on the exchange server to expert and I have seen 2 messages when I try to connect. 
    I get Event ID 1100:  Exhcnage ActiveSync device requests for your uses are being blocked.  This problme frequently occurs when HTTP OPTIONS method is not allowed.
    I know it is allowed as the test exchange connectivity worked and passed that test.
    The other error Event ID 1309 ASP.NET warning.  Part of the exception messge is DeviceTypeMissingOrInvalid
    I have come across a comment that says for certificates to work you need to use windows intune or SCCM which we don't have.  Do we know if this is true? 

  • Samsung Charge:  ringtone notification not working for email

    I have had my Charge for about a month, and really like it.  However, I cannot get a ringtone notification to work for email.  I've followed the steps in guide- what suggestions do you have?  Thanks.

    We can help you resolve your ringtone concerns. We do need some more details about your issue. What difficulty are you having in assigning the ringtone? Does it give you an error when you try to pick the ringtone, or does it allow you to assign it but when the phone rings doesn't work? 
    What have you tried? Have you pulled out the battery? Have you tried another ringtone? Are these stock ringtones or are they downloaded? 
    Please reply with some more details, and I'm sure we'll get you on a path to resolution. 

  • Interactive notification not working for watsapp

    i had updated my iphon 5c with ios 8 but i'm not able to reply watsapp mes from notification that is like done with other messages in interactive notification.  so is it possible for it or not?? is it possible a interactive notification for watsapp mes??? can any one help me with this??

    An activity step with agents is supported by the extended notifications if it is a decision task or not, I have used it many times and it works well just no approval/rejection links if it's not a decision task.
    From your screenshot you can see that a mail has been created and is found in SOST, usually this cases are problems with the mail server or connection to it, check the mail settings in the SMTP node in transaction SCOT, also check with mail server team if there is a block to/from the SAP server.

  • TREX not working for e-recruiting with HTTP content server

    We have a separate e-recruiting instance where we have only e-recruiting functionality installed. In this system we are using Storate type as "http content server instead of standard setting "SAP system database" for HR_KW content repository via transaction code "OAC0"
    Following are the details
    Document Area: HR_KW
    Storage type : HTTP Content Server
    Version no. 0046 Content Server version 4.6
    HTTP server vd24cs02.sce.com
    Port Number 8080 SSL Port Number
    HTTP Script archive
    Phys. path /usr/sap/N09/SYS/global/
    Points to be noted:
    1) TREX Search functionality for Job postings etc is not
    working with this setting, however if we use HR_KW_CONT (storage type=03 SAP System database) , above mentioned functionalities work. We observed that xml files required for TREX search are also not getting created when we change the settings.
    2) We observed that when we change the storage type the indexing job is successful but application log shows some failures in reading/modifying xml files
    Please let me know what are the settings/ procedure to use a different storage type instead of standard setting delivered with the product. Anything related to the setting for above requirement

    Hi All,
    I may have a similary problem but I'm not entirely sure.
    I have been tasked with setting up a simple java servlet to authenticate against a BOXI (Business Objects) server, from my tomcat server (tomcat 5.5) on my windows XP  desk top machine. I will add more info on this shortly.
    I have been supplied with a krb5.ini file and the bscLogin.conf file as follows:
    bscLogin.conf :
    com.businessobjects.security.jgss.initiate {
    com.sun.security.auth.module.Krb5LoginModule required debug=true;
    krb5.ini[libdefaults]
    default_realm = ADF.SOMEWHERE.CO.UK
    dns_lookup_kdc = true
    dns_lookup_realm = true
    default_tgs_enctypes = rc4-hmac
    default_tkt_enctypes = rc4-hmac
    [realms]
    ADF.SOMEWHERE.CO.UK = {
    kdc = DC90.ADF.SOMEWHERE.CO.UK
    default_domain = ADF.SOMEWHERE.CO.UK

  • IOS 5 Notifications Not Working for Some Third Party Apps

    Recently updated my iPhone 4 to iOS5. Notification center worked perfectly for a week, but then I noticed that certain apps (Beluga) would not show up in the notification center despite receiving new messages. The home page didnt update with a badge either. It seems as if push notifications for some third party apps are not working correctly.
    I have already attempted all of these to correct the problem to no avail:
    1. Confirming notification settings for each application
    2. Turning notifications off and then on
    3. Removing and reinstalling app
    4. Restarting the iPhone
    5. Shutting down and powering up the iPhone
    6. Restoring the iPhone

    Having the same problem...  Ipad 2 running iOS 5 working fine.  My iPhone 4s gets the occasional Facebook notification but not much else.  Got home today and had about 5 notifications on the iPad that never came through to the iPhone.  Tried everything you tried and nothing....

  • Notifications not working for iCal or Reminders

    I just installed Mountain Lion and have the following checked in Notification Center for both Calender and Reminders, but no alerts/banners ever show:
    -Show in Notification Center (5 Recent Items)
    -Badge app icon
    -Play sound when receiving notifications
    When I create a reminder in Reminders or in iCal, it shows up in the Notification Center saying "in 1m" or whenever it's due, but no Alert or Banner ever pops up and I don't hear any sounds either (and my sound is on and turned up).  Am I missing something?  Both apps are "open" (they have the little light below them in the dock).
    A follow up question: do notifications work for iCal or Reminders (or any app) if the app is closed, minimized, or hidden (Command + H)?
    Thanks for your time.

    You cannot sync calendars or contacts with iCloud using Snow Leopard: iCal is trying to connect to the MobileMe server which is closed, and you need to remove it from Preferences>Accounts.
    You may be able to sync your calendars to iCloud by means of an unsupported hack, and there is a convoluted hack which has been reported as working for Address Book (and as not working by others - I've not tried it), but iCloud's other facilities will not work. This page outlines the situation with Snow Leopard and iCloud, including a link to the calendar hack:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html
    There are a couple of third-party solutions which may be of interest.
    BusyCal is an iCal-like calendar application with extra facilities: it can sync with the iCloud Calendar while running on Leopard, Snow Leopard or Lion. A single user licence (two machines allowed) is $49.99.
    Soho Organizer can sync Calendars and Contacts with iCloud on Leopard, Snow Leopard and Lion. A single user licence (multiple machines allowed) is $99.99.
    (I have no connection with either firm.)

  • Iphone 4 push notifications not working for any app

    hi, Actually I own an iPhone 4 os 4.2.1(8c148). The thing is that push notification for all the apps that support this feature is not working, I've been an iphone user for long time now, so I konw all the stuff about turning on the push notifications etc. the problem is that my phone give me the pushes like 1 hr or 2 late, or some times never , i just have to open the apps to see my new messages and stuff. Since i live in colombia I have brought the iphone to the store and they take it for like a week and then they give me the phone back saying that is ok , but it isn't. I' have reinstalled the software, I've done anything you can think of, like turning on an of push notification, put it in plane mode, restore as new, backups, and I don't know what else to do, and the thing is that in colombia they don't exchange your phone that easy as it is in the US. So please any advise? ANd I'm sorry about my English. Thank you!

    Unfortunately you have already done everything we can possibly instruct you to do.. at this point the only option is getting them to exchange it its under warranty its not working you have to get a exchange

  • Exchange 2013 CU3 Retention Policy Not working for Calendar & Tasks

    We are currently on Exchange 2013 CU3 with Online Archiving Enabled for the user
    Default policy is set to move  all the items in mailbox which are  older than 30 days to online archive mailbox.
    Calendar and Tasks Items are also getting archived alongwith other Outlook items from Inbox,Deleted Items etc
    Followed Technet website and created RPT for Calendar and Tasks with retention disabled
    Still DPT takes precedence and move all the items under Calendar and Task to Online Archive Mailbox

    Hi Sam,
    I recommend you refer to the following article, despite this for Exchange 2010, however the same applies to exhcnage 2013:
    Prevent archiving of items in a default folder in Exchange 2010
    To prevent the <acronym title="Default Policy Tag">DPT</acronym> from being applied to a default folder, you can create a disabled <acronym title="Retention Policy Tag">RPT</acronym> for that folder (or disable
    any existing RPT for that folder). The Managed Folder Assistant, a mailbox assistant that processes mailbox items and applies retention policies, does not apply the
    retention action of a disabled tag. Since the item/folder still has a tag, it's not considered untagged and the DPT isn't applied to it.
    Why are items in the Notes folder still archived?
    If you create a disabled <acronym title="Retention Policy Tag">RPT</acronym> for the
    Notes folder, you'll see items in that folder are not deleted, but they do continue to be moved to the archive! Why does this happen? How do you prevent it?
    It's important to understand that:
    A retention policy can have a <acronym title="Default Policy Tag">DPT</acronym> to
    archive items (using the Move to Archive retention action) and a DPT to
    delete items (using the Delete and Allow Recovery or
    Permanently Delete retention actions). Both apply to untagged items.
    The move and delete actions are exclusive of each other. Mailbox folders and messages can have both types of tags applied - an archive tag and a delete tag. It's not an either/or proposition.
    If you create a disabled RPT for the Notes folder to not delete items, the archive DPT for the mailbox would still apply and move items.
    When it comes to archiving, there's only one archive policy that administrators can enforce – the <acronym title="Default Policy Tag">DPT</acronym> with 'Move to archive' action.
    You can't create a <acronym title="Retention Policy Tag">RPT</acronym> with the 'Move to archive' action. This rules out using the disabled RPT approach to prevent items from being moved.
    Best regards,
    Niko Cheng
    TechNet Community Support

  • BPEL - Pick not working for Async message with headers

    Hi,
    I've developed a BPEL Process that can be called both Async and Sync.
    In DEV environment works just fine but when I tried to deploy it to the production environment the Sync message continues the same but the Async one doesn't even appear in the BPEL Console.
    The thing is that the Async one uses some headers passed in the message to know where to send the reply to and related information. If I remove the "bpelx:headerVariable" from the onMessage the Async process starts but fails because of the missing headers.
    Is there any configuration in the Production environment that I have to change in order to have this working? What can I be doing wrong?
    I haven't changed any line of code from de DEV environment (Except for DB connections)...
    Thanks in Advance,
    Daniel Alves

    Apply the SAP Note 698527 to implement change pointers using Custom message type (ZCLFMAS) for CLFMAS
    The root cause for the issue is, sap hard coded the message type as u201CCLFMASu201D in the program LCLVFF30, as a result the custom message type u201CZCLFMASu201D will not work.  The sap note 698527 has the correction to this program.
    Thanks
    Vijay

  • Script logic not working for GL account with Zero balance

    Dear Experts,
    I have a scenario where the GL account balance in ECC is 0  and when a script logic runs in BPC the same should capture a closing balance as "1".
    Though I have written the below logic, this is not getting executed and writing back the value as "1".
    Kindly help me on the same.
    *WHEN ENTITY
    *IS "ABC"
    *WHEN ACCOUNT
    *IS "20300000"
    *REC(EXPRESSION = 11, ACCOUNT = 20300000,FLOW = F99, ENTITY = ABC, PROFITCENTER  = 130010 ,  INTERCO = I_NONE , CONSOSCOPE = G_NONE, CURRENCY = LC ,CATEGORY = ACTUAL, AUDITID = INPUT)
    *ENDWHEN
    *ENDWHEN
    *COMMIT
    Regards,
    Shilpa

    Hello Vadim Kalinin,
    Thanks for the very swift help.
    Merger of the client happened in 2007. ECC is using the " 20300000- change in fair value " account to record both pre-acquisition and post-acquisition values.
    Since the treatment of pre-consolidation and post consolidation reserves is different the split of the amount between pre and post-acquisition values has to be done. For the same post acquisition value is reduced from this account using a script logic as below.
    WHEN FLOW
    *IS "F99"
    *WHEN ENTITY
    *IS "ABC"
    *REC(EXPRESSION = ([ACCOUNT].[20300000] -3258603),ACCOUNT = 20300000,FLOW = F99,  INTERCO = I_NONE , CONSOSCOPE = G_NONE ,CURRENCY = LC ,CATEGORY = ACTUAL )
    This logic worked when the account has a figure, but in July 2014 in ECC the account had a transaction and the balance has become Zero. Until this account has a figure this pre acquisition logic is not working.
    For making this work, I am trying to write a new logic to make the balance of this account as "1" in BPC through the script logic.
    Kindly suggest me on the same.
    Regards,
    Shilpa

  • Push notifications not working for Facebook and Tw...

    Normally if I'm using an app, or doing something else with the phone, and a pop-up notification of an SMS, email or IM appears, I simply click it an it takes me to the app/conversation. However, this is not the case for my Facebook and Twitter notifications. The notifications do pop-up, but, when I click it nothing happens. It does not take me to the app. If I click the pop-up, the notification doesn't show on the events screen, as if I clicked it before. I can click Facebook and Twitter notifications on the event screen an it takes me to the app, just not with the push/pop-up notifications. Its really annoying sometimes. Thanks in advance.
    Regards,
    Arun Lall

    Hi arunakajacob,
    Welcome to the Nokia forums.
    This will most likely be a bug in the application. Delete the application and reinstall it via Nokia Store > My Stuff. 
    If this doesn't fix it, a reset maybe necessary should. Make sure you make a back up with Nokia Link. You can find out how to back up using Nokia link on the below link:
    http://europe.nokia.com/support/product-support/nokia-link
    Once backed up you can reset your device with instructions on the below link:
    http://europe.nokia.com/support/product-support/n9/user-guide?ccf_name=nokia-n9/guide/GUID-6D73C105-...
    Once the phone has rebooted, reconnect it to Nokia link  and restore your device:
    http://europe.nokia.com/support/product-support/nokia-link/faq#03
    To check for updates please refer to the following link:
    http://europe.nokia.com/support/product-support/n9/user-guide?ccf_name=nokia-n9/guide/GUID-1BC62312-...
    Let me know if this doesn't work so that I can troubleshoot further, if necessary.
    Iris9290
    Moderators notes: Message re-written to reflect accurate information for the N9 and Nokia Link as pointed out bty @SeanBangkok.
    If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

  • Reader Extended PDF not working for some users

    I've created a document in Adobe X Pro and saved it as a Reader Extended PDF with Enabled Commenting & Markup. Most users are having no problem adding comments (by attaching a file) but I have a few users having issues (one with Adobe Reader 9 for Mac and one with Adobe Reader X for Windows). They are seeing the bar at the top telling them they cannot save data in the form, and they do not have access to any of the commenting or markup features.
    Thoughts?

    Which web browsers are they using to download the PDF file?  If you send them the Extended PDF file via email are they able to connect to the Shared Review?

  • SQL Query not working for column names with spaces

    Hi People..
    We have a strange situation wherein, the column name in the database table has a space inbetween like "Constant Name". While we write a JDBC statement code with the select query we get an exception for invalid syntax. It will help us in a great way if you have anything to inform us on this..
    Thanks
    Prabz

    Using case sensitive names and names with spaces in it is not a good practice.
    However, I believe the SQL standard accounts for this with quoted identifiers. I believe the syntax is
    . select "My Field1", "My Field2"
    . from "My Table'
    Have also seen the following although it might be MS Access specific.
    . select [My Field1], [My Field2]
    . from [My Table]

Maybe you are looking for