Extending Verizon FIOS network using Airport Extreme

I have Verizon FIOS. I use the Verizon Actiontec MI424WR Access Point, as required by Verizon (I know that I don't have to use it, but I want to so that I can take advantage of Verizon's diagnostic software).
The Actiontec access point is on the first floor of my home. A Mac is hardwired to it, and I have no problems with it.
I have two laptops (one PC and one Macbook). They are connected via wireless network and work fine on the first floor.
However, both laptops have problems in 2 of the 3 rooms on the second floor of my home. The actiontec access point signal is weak in these rooms.
Here is my question: Is it possible to use the Airport Extreme to wirelessly extend the range of the Actiontec network so that the laptops can be used in all of the second-floor rooms. And if so, how?
Some additional information: (1) I cannot connect the Airport Extreme to the Actiontec access point via an ethernet cable; (2) I am told that the Actiontec access point does not work with WDS; and (3) I use WEP security.
Thanks for your help.

Here is my question: Is it possible to use the Airport Extreme to wirelessly extend the range of the Actiontec network so that the laptops can be used in all of the second-floor rooms. And if so, how?
No. The Actiontec is not compatible with Apple's WDS.

Similar Messages

Can I create a unique subnetwork when extending a wireless network using Airport Extreme?

My office building has an Airport Extreme to provide wifi to our individual suites. I would like to create a sub-network using my Airport Extreme for my suite only that uses the wifi signal from our office building and provides internet to the computers (both wired and wireless) in my suite but have it protected so that other suites in my building can't see my computers. Is this possible and how do I do it? I have currently set up my Airport Extreme in wifi-mode "extending a previous wireless network" and have the router with its unique router name. But once I extended the wireless network, I could not find the network name of my router, only the office name (the one I was extending). The computers connected via ethernet to my Airport have internet access but none of my wireless computers see my airport name, it sees the office building network name. I'm assuming they are connecting to my Airport since the signal level is much higher than before and it appears that my Airport is rebroadcasting the network name of my office building. Is there a way to have my Airport broadcast its unique identifier for wifi, still connect to the internet via wifi signal to the Office building airport and maintain segregation between my computers and the rest of my office building?
Also, when I use the Airport Utility on my Iphone, I see the internet -> the office airport extreme -> and then 2 different base stations connected in a Y. Mine and my neighbors (who is probably doing the same thing as I am). But there is a dotted line to my base station, does that mean I'm connected to the internet via my neighbor's airport?
Any thoughts?

I would like to create a sub-network using my Airport Extreme for my suite only that uses the wifi signal from our office building and provides internet to the computers (both wired and wireless) in my suite but have it protected so that other suites in my building can't see my computers.
It is not possible to configure a single Apple AirPort router in this manner using wireless only, but it would be possible to do this with a single AirPort if you connect your AirPort Extreme to the "main" router using a wired Ethernet connection.
As for wireless only....you could probably do what you want by using two Apple routers....an AirPort Express to join the wireless network and provide an Ethernet signal to the AirPort Extreme's WAN port. Then the AirPort Extreme could then be configured to provide a separate network using a different subnet.
Users on the "main" network would not be able to "see" any devices on your "private" network and vice versa.
I use the two router set up all the time at hotels that only provide a wireless signal. The first Express "joins" the wireless network and feeds an Ethernet signal to the second AirPort which is configured to "create a wireless network" in router mode.
This way, I can connect multiple devices to my "private" network, but only pay the hotel for one connection since the hotel router only "sees" the AirPort Express that joins the network.

Is it best to extend a Wifi network using Airport Extreme 802.11ac or Express ?

I previously asked this question with a different emphasis here:
https://discussions.apple.com/message/24347878#24347878
so have re-worded to be more relevant to the subject.
I have a brand new Airport Extreme 802.11ac which I am now using as my network hub and I would like to extend the network wirelessly.
Is there a benefit to extending the network via another Airport Extreme 802.11ac versus a (cheaper) Airport Express ?
I do not have any 802.11ac clients yet, but likely will do within the expected lifespan of the routers and thus would rather buy another Extreme now if it meant extending the best signal strength.
Per my previous post i would ideally extend using my old Edimax BR-6675nD 450Mbps 2.4GHz/5GHz, however this has been problematic and some previous posts imply that mixing Apple and non-Apple routers is not recommended, if this is not correct please do let me know.
Thanks in advance.

Is there a benefit to extending the network via another Airport Extreme 802.11ac versus a (cheaper) Airport Express ?
Four possible benefits, which may or may not be benefits to you:
1) A second Extreme will extend the faster "ac" speeds of the main AirPort Extreme, while the Express will not.
2) A second Extreme uses Gigabit Ethernet ports....ten times faster than the Express....if you plan to connect devices using an Ethernet connection
3) The USB port on the AirPort Extreme will accept a hard drive while the Express will not
4) The AirPort Extreme has a much better antenna arrangement than the Express, which will provide greater coverage even if "ac" wireless is not used
On the other hand, if you do not need "ac" wireless to be extended, you only plan to use the Express to extend the wireless, and the Express will be located where it can receive a strong wireless signal, then you might save a bit of money going with an AirPort Express.
So, in questions about what would be "best", there are rarely simple answers that apply to all users. The question really is which is "best" for you. Adding another AirPort Extreme would be a no brainer for me, but perhaps not for you.
i would ideally extend using my old Edimax BR-6675nD 450Mbps 2.4GHz/5GHz, however this has been problematic and some previous posts imply that mixing Apple and non-Apple routers is not recommended
It is always the best idea to use products from the same manufactuer for the same purpose throughout the network. Obviously, an Apple AirPort Extreme will be compatible with another AirPort, while a third party device may or may not be.

When extending my wifi network using an Extreme as my main and an Express to extend.. does it help to make sure that both devices are on the same channel or does it even make a difference if they are on different channels?

when extending my wifi network using an Extreme as my main and an Express to extend.. does it help to make sure that both devices are on the same channel or does it even make a difference if they are on different channels?

Have you even tried the process in which i have described in my previous post?
Yes, many times. If you are setup to "extend a wireless network, the screen looks like this:
If you click the Wireless Options button, the screen looks like this:
Where is it on this screen that you see a setting to adjust the channel? It sounds like you are confusing "create a wireless network"....which does allow you to adjust channels.....with "exend a wireless network" which does not.
Normally, when you extend a wireless network, AirPort Utility used to always assign the same channel to the extending device. That is no longer the case. It might be the same, or it might be different. You have no control over this, so you have to accept what AirPort Utility thinks is best.

How can I rename an established wireless network using airport extreme?

How can I rename an established wireless network using airport extreme?

Thanks for the info. On your Mac......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the picture of the AirPort Extreme
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window that appears
Edit/backspace out the Wireless Network Name and type in a new name that you want to use
Click Update at the lower right of the window
Wait a full minute for the AirPort Extreme to restart
Close AirPort Utility
The new network that you named will use the same network password that you set up originally.

How to rename my network; using Airport Extreme

I would like to rename my wireless network and guest network. I am using Airport Extreme, and have extended the network using an Airport Express. Can someone tell me how to rename these, and what problems I might run into when I try to use Wi-Fi devices after I've done that?

Welcome to the discussion area, Cindyluhu!
You would use AirPort Utility to change the name of your wireless network. It will be relatively easy to change the name on the AirPort Extreme...4-5 clicks and Update
In order to change the name on the Express, you'll need to "hard reset" it and reconfigure it. Not too difficult if you have done this before.
If you change the name of the wireless network, you will need to enter the password to connect to the network the first time that you log on with any of your devices. If you have them set to "remember" the network, you won't have to enter the password again unless you make another change to the network name or password.
Post back if you need some steps to change the wireless network name on your devices.

Extended router's network for Airport extreme. Works well with MacbookPro. I can print with notebook with XP SP3 and, I can see the USB-harddisc in the Airport service program but, I cannot use it. I have set filesharing etc. What do I do wrong?

I connected the Airport Extreme wireless to the existing network of my router. At the Airport there is connected via USB a Printer and three hard discs. All works well on my MacBook Pro - I can print and use the hard discs. On my notebook and my desktop, both with XP-SP3 I can use the printer only. In the Airport service program - manual set up - hard discs I can see the drives with the correct names but I cannot work with it. I don't find neithe the Airport Extreme nor the drives in the Windows Explorer. Of course I've set 'filesharing' etc. What do I do wrong? Where is the mistake in the set up?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

How can I extend my wireless network using Airport Express and an Airport Extreme on BT Infinity?

I have BT Infinity and I am using the Time Capsule with Airport Extreme as my router. Working well (even on wireless). I want to extend the wireless network with an Airport Express, but I cannot work out the settings necessary in Airport Utility. I am using Mountain Lion 10.8.2 on a Mac Pro. Please help!

BT,
I've read several of your posts, thanks for taking the time to share your wealth of knowledge.
I'm in a situation similar to the one described by 'scoutusmaximus'. Seeking the flexibility of a standalone router, I finally upgraded my 4-yr old ATT DSL gateway (modem+router) to a Comcast standalone modem + the ASUS RT-AC66U: http://www.asus.com/Networks/Wireless_Routers/RTAC66U/
Typically, I stick with all things Apple but the ASUS router seemed fairly superior to the current-gen base station (on paper, anyway; time will tell when it comes to performance) so, for once, I jumped ship. My plan was to extend the ASUS wired/wireless network using my TimeCapsule and 2 Airport Expresses in bridge mode, however, a google search turned up several unhappy customers that claim those devices don't play well with non-Apple routers, especially when it comes to 'extending' a network.
Questions:
1. Can I successfully extend the wired/wireless network created by the ASUS router using the 3 airport devices listed above w/out negatively impacting performance? I'd rather have 1 wireless network as opposed to creating a new wireless network with the TC and then extending it with the AP Expresses... though I'd consider that option down the line if it came to that.
2. Will the LAN ports on the TimeCapsule remain functional?
Btw, my house is wired so, I can reach all 3 devices via ethernet cable coming off of a central, managed switch. Supposedly, you only lose the LAN ports on the TC if you extend wirelessly.
Any advice would be appreciated.

Extending wireless network using Airport Extreme

I am thinking about using another Airport Extreme to extend my wireless signal.
I am curious if the ethernet ports will be rendered dead in the Airport Extreme like they are in the Airport Express untis when you choose extend.
I know I could go to a Roaming network but that is not the question for this setup.
I am hoping that I can use the ethernet ports for other things where the Extending Airport Extreme is as I have some devices I also want to hook up.
I have read something about this in the past but can't seem to find the answer now.
I already have one fairly new Extreme (square style) and am thinking about getting the newest version with the different and taller case.
Again, I would rather use the Extend feature rather then a Roaming because it would be difficult to run wires.
Also note: no electrical ethernet adapters either using the wall plugs. Not interested in that setup.
Thanks

Thanks Bob.
I have 3 Airport Express units that when in "Join a wireless network" the ethernet port can be enabled.
However, when I choose "Extend a wireless network" I no longer have that choice of allowing ethernet clients, it changes to only "Allow wireless clients". That's what has me curious and confused.
I haven't tried plugging anything into the units that are extended so I can't verify the ethernet ports work or not.
They are the b/g/n units but not the newest models. The models before that.
The window says it is an Airport Express 802.11n model.
The Airport Extreme is also 802.11n (4th generation)
All my base stations are running 7.6.4

Extended Network using Airport Extreme and TC

Our home is mostly concrete which is not that conducive to a great WiFi signal throughout. Currently I have an Airport Extreme connected to the modem on the main floor, and a TC extending the network on the second floor.
Is this the most ideal set up? Does it make any difference which one is connected to the modem, and which unit is extending the network?
Thanks for the inputs.

The ideal setup would have the AirPort Extreme and TC connecting together using a wired Ethernet connection.
Next best might be a setup using Ethernet powerline adapters to send the Ethernet signal over the existing AC powerlines in your home. The theory here is good, but in practice, things may not work quite as well as the theory suggests. Some users have good luck with this approach, while others....like me.....don't have much success.
Last choice is always a wireless connection. Lots of signal loss this way between the devices and other electronic devices in the home can interfere with the wireless signal. If you opt for wireless, try to estabish a line-of-sight relationship between the AirPort and TC, or as close as possible.

Extend 5 GHZ network with airport extreme 5th generation

I'm having issues extending a 5 ghz network with an airport extreme 5th generation. Here is what I have -
1 brand new airport extreme (2013) in the basement connected to the cable modem. It nearly doubled the speed I was getting over the 5th gen.
I moved the 5th generation airport extreme up to the office on the first floor. Due to the construction of the house and a mess that previous owners made with the wiring, it's cheaper for me to have multiple devices extend the network to various parts of the house than it is to tear open the walls and try to fix the coax issue. I have a 4th gen and a 2nd gen, as well as a few airport express models. So, the 4th gen extends the 5 ghz network without a problem. I use the 2nd gen to provide 802.11g (2.4 ghz) to some older devices that can't handle 802.11n. Both work fine. When I moved the 5th gen upstairs to extend the 5ghz network in the office it won't do it.
I did a factory reset on it, Set it up with a new device name, and set it to extend the 2.4 ghz network, and it works without a problem. If I change it to extend the 5 ghz network, it restarts and then flashes amber. The airport utility can no longer see it and I have to do a factory rest in order to get it working again. I downgraded the firmware, but that made no difference.
Any idea why the 4th gen works for this, but the 5th gen fails ?

At times, a Hard Reset will not completely clear all of the old settings when you reset the device, and as a result, you do not start from a true factory default.
If you have not already done so, try a Factory Default Reset this way.....
Power off the AirPort Extreme
Wait a few minutes
Hold in the reset button first, and keep holding it for 9-10 seconds while you simultaneously plug the power back into the AirPort Extreme
Release the reset button after the hold period, and allow a full minute for the AirPort to restart
Not sure what else to suggest, other than taking the device to an Apple Store.....if you have one near you....to let them take a look.

Will extending a wireless network using airport express cause weaker signal?

Hoping someone can advise on the following please....
I have installed an Airport Express to extend my wireless network and have confirmed with Apple tech support that it's connected and configured properly. I'm using an Airport Extreme base station as a wireless router.
The AX does not seem to be extending the signal range at all, and since the setup the signal strenght from the Extreme base station seems to be at half previous strengh.
Has anyone experienced this please and, if so, what's the fix?
Any replies gratefully received.
Regards

Let's check the settings on your Express. Temporarily, move it to the same room or an adjacent room to the Extreme and power it back up.
Open AirPort Utility - select the Express - Click Manual Setup
Click the Wireless tab below the icons and make sure that your settings look like this:
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the Extreme wireless network
Check mark entered next to Allow wireless clients
Wireless Security = Same setting as the Extreme network
Wireless Password = Same password as the Extreme network
Confirm Password
Update to save settings, wait for green light.
Then move the Express another room or two further away from the Extreme....and restart both the Extreme and the Express. Then perform the BSSID test again.

Extending N600 wireless network with Airport Extreme, wirelessly

For the past year or so I have run a Netgear N600 wireless modem router, and have extended the network with a first generation A1143 Airport Extreme Base Station (AEBS). Prior to this I have run the same extended network with an older Netgear router - successfully for 5 years.
After a recent lightning strike, the N600 router needed resetting. Everything was back to normal, however I was unable to reconnect the old AEBS to the network as before. I did this so that I could wirelessly back up the laptops to a connected HDD by Time Machine
Figuring that maybe this was the end of life for the old AEBS, I went out today and bought a new 5th generation AEBS, expecting that I could reconnect everything as I have been running with this router, and the old Netgear router before that without a problem.
Now though, with the new AEBS, I still cannot extend the network. Ive tried everything including connecting it via ethernet to the Netgear Router.
I can only surmise that there is something different in the N600 settings that have changed, than now do not allow me to connect.
Ive even reinstalled Mountain Lion, and also Airport Utility, and trashed preferences...to no avail. Can someone please help? Have I just wasted $200 on a new AEBS?
Im running a Retina MBP and a MBAir

Who wants to use WEP these days... I need apple to update the airport so we can use WPA together with wireless hardware from 3d parties like dd-wrt.
I have 2 airport expresses doing nothing atm because of the lack of SAFE encryption with WDS.

Connect a PC to My existing Wireless Network Using Airport Extreme

this is my issue i bought a Airport Express to connect a PC via ethernet to my wireless network already working at home. Cant figure out the settings???? need help. My home network is using a airport extreme base station. the problem is the PC doesn't have wireless capability so i connected the PC to the airport extreme in order to connect to the network, but no luck so far.

Hello Sailor25. Welcome to the Apple Discussions!
What you need to do is configure the AirPort Express Base Station (AX) as a ProxySTA.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility. The feature should work with any wireless network: a, b, g, or n; and 5GHz or 2.4GHz. (Note that the Express, which ships with firmware 7.3, must also be updated to firmware 7.3.1 for this feature to appear.)

Setup for extending Sky wireless network using Airport Express or Time Cap

Hi,
Hi,
I have three Mac computers/laptops (iMac, MacBook Air and G4 PowerBook), all currently functioning via airport on a sky wireless network (Sky HD Sagem router) all backing up wirelessly to a Time Capsule 1TB which is also connected to the same wireless Sky network. At the top of my house signal strength is weak as you would expect. I would like to be able to extend the range of the sky routers signal which is on the ground floor (3 storey house). My original idea had been to setup a AirPort Express on the 2nd floor to extend the network, but I am unsure what steps I have to follow and whether I need to create a WDS network or not? I've seen some comments that say Sky & Apple hardware are not compatible and it's not possible to extend a Sky router/wireless network using a Apple Airport Express or Time Capsule. Can someone provide me with a step by step set of instructions on what I need to do to set this up? If a work around is required, again any advice would be very much appreciated!
Many thanks,
Eugene

Welcome to the discussions!
Sky and Apple products are not compatible for the purpose of extending your network using wireless only.
If you could connect an ethernet cable from your Sky router to the AirPort Express, or if it's not possible to run an ethernet cable...take a look at a pair of ethernet powerline adapters to accomplish the same task by using the AC wiring in your home to transmit the ethernet signal.
If you configure the AirPort Express to "create a wireless network", this would in effect, extend your network by adding an AirPort Express that would be configured with the exactly the same wireless network name, security settings and password as your Sky router. The AirPort Express would also need to be configured as a "bridge".
Post back if you need more details about something like this.

Extending Verizon FIOS network using Airport Extreme

Similar Messages

Maybe you are looking for