Extends error???

package ro.bazooka.applet;
import ro.bazooka.net.ConnectionEvent;
import ro.bazooka.ui.ConnectionStatusUpdater;
import ro.bazooka.ui.StatusDisplay;
// Referenced classes of package ro.bazooka.applet:
// PublicClient
private class extends ConnectionStatusUpdater
public void endLogin(ConnectionEvent connectionevent)
public ConnectionStatusUpdater(String s, StatusDisplay statusdisplay)
super(s, statusdisplay);
i got an error at "private class extends ConnectionStatusUpdater"
and it says : "Syntax error on token "extends"; delete this token
what should i do??

You forgot to specify a classname.
public class MyClass extends SomeOtherClass

Similar Messages

The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.

got event ID 4015 and source DNS-Server-Service. please suggest how to fix this issue
The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
Raj

Hi
first run "ipconfig /flushdns" and then "ipconfig /registerdns" finally restart dns service and check the situation,also you can check dns logs computer management ->Event viewer->Custom Views->Server roles->DNS.

Drive mapping - extended error

Error message:
The mapped network drive could not be created because the following error has occurred: An extended error has occurred.
Things I have checked:
AD account
Time/date on server and local machine
User account can map them successfully on other PCs
Only a problem when using the fully qualified path to the server. Mapping by IP address works.
Flushed and re-populated DNS cache
Rebooted multiple times
Logon script that normally maps drives is correct
Any ideas?
Thanks,
-Tom

This fixed it for me.
For some reason, a user suddenly cannot use the "NET USE" command to map network drives. Windows logon is working, but accessing network shares become very strange, with "System Error 2221 has occurred" message. This probably is a stored credential problem.
I also got error when trying to use a UNC path with the DNS name "\\Server1\Share1' but it will work if you use an IP based path "\\192.168.0.123\share1"
SOLUTION: Press your Windows' Start / Launch, in "Search programs and files" field type "Credential Manager" and you should see it shows up on the list. Run it.
Check the stored credentials and remove related credentials, by click on the "Remove from vault". Now, try your NET USE command to map drives again.

Extended error check.

hi,
when iam doing extended error check in my program i am getting the error ' the WHERE condition for the key field 'NATION' does not test for equality. therefore a single record in question may not be unique' in the line SELECT SINGLE NAME_FIRST NAME_LAST FROM ADRPS statement.

suppose take table marc
here the primary keys are
key fields are
matnr
werks
so the code is
Select single .... from marc
            where
             matnr = p_matnr
and        werks = p_werks .
Means to say that i have covered all the keys .
In ur referred select see if u have covered all the keys .
<b>ur where clause has to have all teh below fieldsjust like above
where
    TRKORR =
and PERSNUMBER =
and DATE_FROM
and NATION</b>
regards,
vijay

WNetOpenEnum returns extended error code 2107 : The device is not connected

Hi All
Can you do me a favor please, thanks.
I developed a program to enumerate all domain and computers at the local network. This program works normally except
one Windows 2012 R2 windows, and WNetOpenEnum always return 1208, the corresponding extended error information
is :
Extended error id : 2107;
description : The device is not connected;
Provider : Microsoft Windows Network;
Can you please give me some suggestion , thanks.
Thanks
Regards

Hi,
Please refer to the thread below to check if the issue is caused by the Windows Firewall which blocks WNetOpenEnum function.
WNetOpenEnum wrongly blocked by Windows Firewall
https://social.msdn.microsoft.com/Forums/en-US/bb68e580-7913-40d9-86ab-5890f78113e2/wnetopenenum-wrongly-blocked-by-windows-firewall?forum=windowscompatibility
If the issue still exists, I have confired that you could ask for help from
Windows Desktop Development forum:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=windowscompatibility
Thanks for your understanding.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Adobe Photoshop CS3 Extend Error

I had to re install Adobe Photoshop CS3 Extend but now every time I try to start it, it errors out withe the following:
"Could not load the user measurement data point presets file because the file name was not valid."
and "Could not load the user measurement scale presets file because the file name was not valid."
Any assistance would be appreciated. Thanks!

(no reinstalling doesn't reset the preferences...) :)

Photoshop CS4 extended Error 150:30

I have reinstalled Photoshop CS4 extended on my new hard disk as it was replaced by apple, and it now won't open, showing Error 150:30. What do i do?

Please see this link: http://forums.adobe.com/message/4752665

Photoshop CS4 Extended - error 150:30 - "LicenseRecoveryLauncher" not supported on Mac OSX Yosemite 10.10

I recently upgraded to Mac OSX Yosemite 10.10
When I try to open Adobe Photoshop CS4 Extended it says error 150:30 Licensing for this product has stopped working.
I followed the help advice which says to download some software to mend the problem but it wont launch - error message You can’t open the application “LicenseRecoveryLauncher” because PowerPC applications are no longer supported.
How can I fix the problem?

OS 10.7 and above uses the python script (.py) which is included in the License Recovery kit.
Mac OS X 10.7
a. Double-click the LicenseRecovery111.dmg
Note: Leave this window open and proceed to the next step.
b. Double-click your Hard Drive.
c. Double-click Applications.
d. Double-click Utilities.
e. Double-click Terminal.
f. Type “sudo python “
Note: There is a space following “python”. Do not press Return.
g. Drag LicenseRecover.py from the LicenseRecovery folder onto the Terminal Window and press Return. Note: Make sure that the Terminal window has the command and the path to the APP file. For example: "sudo python /Volumes/LicenseRecovery\ 11.6.1/LicenseRecovery/LicenseRecover.py”
h. Enter your administrator user name and password when prompted and click OK.
i. Follow the onscreen instructions.

Photoshop CS3 Extended error on load

Photoshop CS3 Extended
Windows 7 with all updates current
Error message on load 'could not initialize Photoshop because of a program error'
I'm running:
intel core i5
16 GB RAM
148 GB free on drive C
698 GB free on Drive D
465 GB free on drive E
465 GB free on drive F
2 DVD-R drives
All updates to Photoshop were installed last time I ran it with no problems.
No new hardware has been installed since.
Installed Classic Shell since last use, so I uninstalled it but the error persists.
Installed Diet Tracker but they don't interfere with each on on the system at home so I know there's no problem there.
Nothing else installed except Windows updates.
I tried restoring back to the last time I used it . . . still got the error, so undid the restore.
I tried repairing Photoshop . . . no change.
I uninstalled Photoshop, rebooted, installed Photoshop. it loaded slower then and the last thing I saw load was plugins then something about Python and then the error again.
When I try to open the program, it goes so fast that I can't see what's loaded and where it stops now.
I searched for like problems . . . found one that they found was caused by a sound driver on an ASUS board but it was different. I tried rolling back the sound driver anyway and it didn't fix it so I updated it again. There was a reference to check the Event Viewer which I know nothing about but I tried it anyway . . . found nothing.
Any help will be appreciated or if you know a way to debug the load or slow it down to see what it's trying to load please clue me in. Thank you for any help.

O, OK . . . didn't solve the problem anyway. I am sorry I can't figure this out on my own instead of taking up everyone else's time. Downloading and installing 12.6
New driver installed but this did not resolve problem; still getting the error message when trying to load the program
FIRST!!! I want to thank everyone for your help . . .
While waiting for another idea, out of casual curiosity because I hate Win 7, I right clicked the ocn for PS and checked the list of options. Since this was a reinstall, I clicked on the Troubleshoot Compatibility out of curiosity . . . got a choice to Try recommened settings or Troubleshoot programs; I clicked on the 'Try recommended settings' . . . it came up with recommendation of XP Pro setting and I clicked on it and up came PS and installed some more stuff.
I am sure this can't be the right answer or it would have never worked in the original install, but it worked for the re-install and that gets me up and running for the time being . . . now to further test and make sure it's working right.

Photoshop CS3 extended error on Installation("A Problem occurred while extracting some files....

Hi guys. I dont know if youve experienced this but I get this error whenever I try to install Photoshop CS3 Extended. The error popup message goes like this:
"A Problem occurred while extracting some files. Check available space on your computer and the write privileges on the destination folder."
Any idea? :(
thanks in advanced.
Cheers!

Welcome to the forum.
where is the file to download it directly?
With CS3, there might not be one any longer. CS4 has been out for some time. You might need to contact Adobe Customer Service for resolution. I know that they offer replacement media for a small fee, but do not know how far back they go with the versions.
For me, I always purchase the full discs, and from Adobe, so I have little experience with downloaders and with the downloadable files. Maybe someone else can offer you more direct assistance.
Good luck,
Hunt

PS CS4 Extended error message, corrupt DB

When launching the setup for PS CS4 Extended, an error message comes up that says the DB is corrupt, and to contact Adobe. I cannot find a way to get specific support on this issue with Adobe. Ideas?

Hi drt3684,
Please follow the mentioned kb: http://helpx.adobe.com/creative-suite/kb/error-installer-database-corrupt-install.html .
Regards,
Romit SInha

Tablespace Extend Error

I'm getting the following error,
ORA-01653: unable to extend table CDH.XXX_FEATURES by 8 in tablespace FLOW_XXXX
Any pointers?
Thanks.
vinoo

Hello,
Your tablespace has ran out of space, you need to allocate more space to the tablespace either by adding more datafiles or extending some of the existing datafiles.
If you are not the DBA responsible for the database (I assume you're not otherwise I would hope you already know what an ORA-01653 is) then you need report this to your DBA so that they can take the appropriate action.

TCP Extend Errors

Hi All,
I am getting the below errors in my TCP-Extend Proxy nodes.
Oracle Coherence GE 3.5.3/465p3 <Error> (thread=Proxy:ExendTcpProxyService:TcpAcceptorWorker:7, member=19): Extend*TCP has determined that the connection to "Socket[addr=/11.11.56.123,port=18733,localport=17062]" must be closed to maintain system stability: This connection is 1 messages behind (112820921 bytes); the limit is 60000 messages (100000000 bytes).
What does this mean ? Any serious issues in the cluster ?

Hi user594809 ,
Coherence will close an Extend connection if it thinks that the client is not reading messages off of its queue fast enough as this can destabilise the extend proxy. The limit is 60000 messages behind or 100Mbytes behind.
In your case you have tried to return too much data in a single go (112,820,921 bytes) - I have seen this is often the result of an invocation service call or something similar. What tends to happen in this case is that your client has started to read the message back and while doing this Coherence closes the connection so you get stream exceptions in the client.
If you really need to return such a large amount of data there are a couple of settings you can add to your <tcp-acceptor> configuration on the client
For example:
<tcp-acceptor>
    <local-address>
        <address>localhost</address>
        <port>10000</port>
    </local-address>
    <limit-buffer-size>100000000</limit-buffer-size>
    <suspect-buffer-size>10000000</suspect-buffer-size>
</tcp-acceptor>The limit-buffer-size is the maximum size of the queue in bytes before the connection gets closed - The default is 100Mbytes
The suspect-buffer-size is the size of the queue that Coherence starts to log warnings - The default is 10Mbytes
If you increase the limit-buffer-size you should increase the suspect-buffer-size too.
Note there is a reason that these settings are there in the first place and changing them to allow very large results to be returned could have an adverse affect on your extend proxy node and your cluster so it is up to you to test things properly under load.
JK

Extend error during procedure

ORA-30036: unable to extend segment by 16 in undo tablespace 'UNDO_FIMR'
ORA-06512: at "FIM.INSERT_CASE_TREATMENT", line 25
ORA-06512: at line 2
CREATE OR REPLACE procedure FIM.insert_case_treatment as
cursor case_new is
select case_id, treatment_ids from v_case_treatment_ids;
ids varchar2(30); /* value string from FIMT Cases */
newid varchar2(2); /* individual value */
cPos number;
BEGIN
for V in case_new loop
ids := v.treatment_ids;
if instr(ids,';') > 0 then
while (instr(ids,';') > 0) loop
/* get the first ID */
cPos := instr(ids,';');
if (cPos > 0) then
newid := substr(ids,1,instr(ids,';')-1);
else
newid := ids;
end if;
insert into t_case_treatment(case_id, treatment_id) <-------- line 25
values(v.case_id,
(select li.lid_record_id from t_lookup_items_data li
where li.item_id = 50 and li.sort_seq = newid));
/* drop the first id */
if cPos > 0 then
ids := substr(ids,cPos );
end if;
end loop;
else /* only one entry */
newid := substr(ids,1);
insert into t_case_treatment(case_id, treatment_id)
values(v.case_id,
(select li.lid_record_id from t_lookup_items_data li
where li.item_id = 50 and li.sort_seq = newid));
end if;
end loop;
end;
Data Sample
838, '0;1;2;3;4;5;6;7;8;9;10 '
In case it's not self evident I'm taking a packed dataset and expanding it into a table. The semi-colon delimited values each represent a row in the table.
I've got a version of this that has only single digit values separated by semi-colons and it works just great. I had to make some changes to the process to deal with the possibility of double digit values.
One thing I really with I had is a step through debugger. I've got TOAD, but haven't been able to figure out how to turn on the debugger.
Hope someone notices something....
tia
Chris
Edited by: user7815754 on Mar 10, 2009 2:25 PM

Once I finally got the TOAD debugger working I was able to step through the code and fix it. The error never had anything to do with the available "undo" space. I assumed there might be problems with my assumption of the value of cPos, however without the debugger I was not able to verify that.
Just FYI, here's the final code:
CREATE OR REPLACE procedure FIM.insert_case_treatment as
cursor case_new is
select case_id, treatment_ids from v_case_treatment_ids;
ids varchar2(80); /* value string from FIMT Cases */
newid varchar2(2); /* individual value */
cPos number;
BEGIN
for V in case_new loop
ids := v.treatment_ids;
if instr(ids,';') > 0 then
while (instr(ids,';') > 0) or (length(ids)>0) loop
/* get the first ID */
cPos := instr(ids,';');
if (cPos > 0) then
newid := substr(ids,1,instr(ids,';')-1);
else
newid := rtrim(ids);
ids := '';
end if;
insert into t_case_treatment(case_id, treatment_id)
values(v.case_id,
(select li.lid_record_id from t_lookup_items_data li
where li.item_id = 50 and li.sort_seq = newid));
/* drop the first id */
if cPos > 0 then
ids := substr(ids,cPos+1 );
end if;
end loop;
else /* only one entry */
newid := rtrim(ids);
insert into t_case_treatment(case_id, treatment_id)
values(v.case_id,
(select li.lid_record_id from t_lookup_items_data li
where li.item_id = 50 and li.sort_seq = newid));
end if;
end loop;
end;
Adding "length" and "rtrim" eliminated other problems that were not visible without a debugger.
It turned out that the login instance wasn't authorized to run the debugger. Once I got the authorization things went much faster. :)
Use Toad Adviser under HELP to determine what's turned on and what's not. Clicking on the Adviser message about the debugger revealed the lack of authorization.

Harware test (extended) error codes

Hi,
I have an early 2007, 20", 2 GHZ iMac, a couple of days ago I ran the extended hardware test and got the two following error codes:
4SNS/1/40000000: TOOP and
4MOT/1/40000002: ODD
I did a bit of online research and found out that the first one supposedly is the sensor for the optical drive, I assume that it has to be replaced.
The second code I found relates to a fan, but I couldn't find out which fan.
Does anyone know if the first answer is right and maybe have the complete answer for the second code?
I would very much appreciate some help with this,
Thanks

Looks like a straightforward memory error to me, Jim.
Try using MemTest or Rember, rather than the TTD or AHT tests - see http://guides.macrumors.com/Testing_RAM
Sometimes simply re-seating your RAM will fix such things but usually it means a "bad" stick. If so, and your Mac is under warranty, and it is the original RAM, then Apple will replace it. If it is "third party", then check the manufacturer or vendor's warranties.
Cheers
Rod

Extends error???

Similar Messages

Maybe you are looking for