External drive changed to read-only

I have a Western Digital external drive that I use for Time Capsule and Super Duper! This morning, when I wanted to start work, Time Capsule said that my drive "appears to be a read-only drive," and Super Duper had failed its overnight backup.
I used BatChMod, and changed the permissions.
When I opened a finder window for the external, it still showed the read-only icon in the lower left hand corner of the window.
The Get Info window shows System as the owner, Admin as the group, with all permissions. EVERYONE has read-only permission.
When I look at the disk in Disk Utility, Repair Disk Permissions is greyed out.
What would change the disk's status, and how can I fix this?
Thanks,
Nicky

Most likely, your backups were corrupted, beyond Disk Utility's ability to repair them. It's possible a 3rd party disk repair app, such as +Disk Warrior,+ could have fixed them, but it's too late now.
Does the drive have two partitions, one for Time Machine backups, and a second for SuperDuper? If so, erase the Time Machine partition and let TM start over.
If not, that's a problem (see #3 in the Frequently Asked Questions *User Tip,* also at the top of this forum). Your best bet is to reformat the disk with two partitions. See #5 in the FAQ for detailed instructions. Then start both Time Machine and SuperDuper over fresh.
Longer-term, having both backups on the same physical drive is not good; if the drive fails, you risk losing both of them.

Similar Messages

Drive changes to read only

I am new to mac. I have a new 27" IMac. I purchased this computer strictly for photo processing
I have 3 external drives
1. Time Machine backup - Seagate 3TB - No problemn with this drive right out of the box
2. Photo Drive - Seagate 2TB Firewire drive- Photo library is 1.4TB
3. Original Photos -Seagate 2 TB USB drive Small amout of data but have used this for backup while reformating the photo drive
1TB Internal drive that only contains the OS and Programs. Mainly Adobe Lightroom and Photoshop
The Photo Drive was purchased as ready for PC or Mac
I pluged it in and it worked just long enough to load all my photos and get things organized.
The 2TB Original Photo drive was originall used for PC and I discovered I could not write to this drive so I reformatted to OS Journaled.
Next, My main Photo drive became read only - Error message stated I need to refornat the drive - Error 36
I transfered all Photos to Original, Reformated Photos as OS Journaled and then transfered files from Origianl back to Photo
All sorded for a a couple of weeks then the Origial drive became read only and I have to format it again.
Since then, the photo drive has become read only two more times.
I just finished reloading the photo drive for the third time on Thursday. For the last 3 days I have been Importing new photos from several weeks of shooting.
All seemd fine untill today. I tried to create a folder and discovered the photo drive is once again read only. The Original photos drive is still read / write.
I have read everything I can online. It seems other people have had similar problems but I found no solutions.
Currently the photo drive info is as follows
Flormat Mac OS Extended - I'm sure I selected Journaled on the last format
Sharing and permissions
"You can only read" is at the top
followed in black text
     Paul (Me) Read & Write
     Staff Read & Write
     Everyone Read & Write - (I changed this after formatting and before reloading the drive thinking it might help)
     Ignore ownership is checked
I can unlock the pad lock Icon but I cannot change anything except I can uncheck and recheck Ignor ownership. However this still does not allow me to make any changes.
One clue I may have to offer
I use a small Seagate drive named Transfer Drive which I use in the field.
It is formated NTFS
I download photos from my photo cards to my PC notebook and back them up to the Transfer drive
When I get home I import photos from the Transfer drive to my iMac using Lightroom
This was the last action I performed yesterday. I performed 8 imports from the Transfer drive to My imac with Lightroom
Is it possible that importing from a NTFS drive to the external Photo drive is causing this problem?
I really need to solve this. It takes about 3 days for me to move my photo library and reformat the drive
Not to mention the fact that I am very worried about my photo files.
Thank you in advance
Paul McCroskey

There may be a solution here, but I would modify the instructions to say that if Verify disk shows OK, you don't need to go on to Repair.
https://discussions.apple.com/message/18266486#18266486
First, copy/paste, leave a space after -alO and drag Photos into the Terminal window and hit return.
ls -alO
If the output shows the uchg flag, the immutable (locked) flag, then run the following to remove it.
sudo chflags nouchg /Volumes/Photos
If that doesn't fix it, then Verify Disk. If that shows an error, then follow the instructions to copy the data elsewhere first, then run Disk repair. Sometimes, though this is rare, disk repair can make things worse.
(After removing the immutable flag -- if it proves necessary -- you may still have to go on and run the commands you tried earlier.)

External drives mount as read only

I am running OS X 10.6, on a MacPro. Something happened recently to make my external hard drives mount as read only. The only way I've found to be able to fix them is to run Disk Utility every time I start up my computer. Does anyone have an solution to this?
Also every time I run the Disk Utility, at the end of the repairs it says "Updating boot support partitions for the volume as required." I do not know if this is related, but I haven't been able to find anything relevant in relation to my problem with the drives mounting as read only.
Message was edited by: HeatherK

You might give this a try:
Select the drive and Press COMMAND-I to open the Get Info window. At the bottom open the Ownership and Sharing section. Be sure the box labeled "Ignore permissions on this volume" is unchecked. If it is checked then click on the lock icon, authenticate, then uncheck that box. Close the window.
Open the Terminal application in your Utilities folder and at the prompt enter or paste the following:
sudo chown root:admin
Put a space after "admin" then drag the drive's icon into the Terminal window. Press RETURN. You will be prompted to enter your admin password which will not be echoed.
See if this fixes the problem.

External drive reverts to read-only on reboot

My 2TB firewire drive becomes a read-only drive after a computer reboot. From a cold start, drives boots to read-write. How do I fix this?

Nicky McCatty wrote:
Earlier this morning my external drive, a Western Digital Firewire 800 1TB, was behaving normally. I shut my MacBook Pro down, and took it out for two hours. When I returned, Time Machine reported that my drive appeared to be read-only. I see that BOTH of my external Firewires now show up as read-only.
What causes this to happen, and what can I do about this problem?
A number of things. Most common is probably a power loss; second is probably disconnecting without first ejecting.
It's not permissions; try running +*Repair Disk+* on them, per #A5 in Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).

My external hard drive change to read only

I have been backing up my vids, pics, etc on my Seagate HDD for the past 2 months with my Macbook Air. All of a suddenly my external HD changed permissions to read only. I understand that this has been a hot topic for some time but I have not found the solution in any of the threads. Under the "Get info" tab "Sharing & Permissions" section it only reads "you can only read" with no other info. No mention of the users (I am the admin and there are no other users setup) or any other info and I can't click or hit anything (other than my head against the wall!!!!) If I try the Desktop Utilities route my Macbook Air recognizes the eternal hard drive but all buttons such as "verify Disk" etc are greyed out... no idea what I should do. Tried logging out of my user account and back in, tried ejecting and reconnecting but everything has failed.
Anyone with any ideas?! please need any help I can get. Thanks!

Disd you ever get a resolution to your problem? I have exactly the same problem with my ADATA HD710 I use for Time Machine, it works fine for a while, then for no apparant reason I can no longer write to the disc. Even though my permission is still read/write, I am told I can only read and everything is greyed out in disk utility. Previously fixed problem by reformatting, and starting again, but have just lost ability to write again. Need help!
FYI appears to happen when disc not connected to MacBook for a while. Disc fomatted Mac Os extended.

After moving iTunes, external drive sometimes becomes read-only after reboot

I had some system corruption a few weeks ago, and had to restore my system. As part of that prolonged effort, I decided to move my iPhoto Library and iTunes Library to external FW800 drives.
I had terrible problems initially with these drives mounting read-only. I found a relatively quick work-around, and that seemed to fix the problem. But I still have them periodically mount read-only, and I can't D/L iTunes updates, etc.
Why do they keep doing this on a reboot? Very frustrating, as I need to reboot as part of the fix, and I'm always in the middle of something else, and can't reboot at that time.

Oh, as part of this, not sure when the change was made, OSX used to keep the mounted volume name in /Volumes, even if the volume was ejected. Would cause an occasional problem - but very rare. I notice now that ML seems to create/delete these mountpoints automagically - and that's part of the problem. They get incorrect permissions when the volume mounts, and I (user I'm logged in as), can't write to the volume without some background shenanigans.
My process is this:
Unmount problem volume
Drop to terminal, and "sudo mkdir /Volumes/<mounted_volume_name>"
Remount volume via Disk Utility (you now get a "<mounted_volume_name> 1" - with CORRECT permissions)
Unmount the volume again
Remove the created directory (i.e. undo step 2)
Remount the volume - 99.9% of the time that seems to fix it.
Reboot to be sure - and it stays for a while - then at some point becomes a problem again.
Not sure if it's something in ML that's an issue - or something in iTunes or iPhoto (but can't see how they would affect the permissions when the system reboots and you login)

External drive reverts to read-only on airport extreme

I have an external drive that works fine (full access read/write) when connected directly to my Macbook but reverts to read-only when I connect to it through my airport extreme. It also won't let me change the permisssions over the network. I have another drive used for Time Capsule connected to the Airport Extreme and it works fine, as well as the printer. The problem drive is formatted OS X extended (journaled).

Nicky McCatty wrote:
Earlier this morning my external drive, a Western Digital Firewire 800 1TB, was behaving normally. I shut my MacBook Pro down, and took it out for two hours. When I returned, Time Machine reported that my drive appeared to be read-only. I see that BOTH of my external Firewires now show up as read-only.
What causes this to happen, and what can I do about this problem?
A number of things. Most common is probably a power loss; second is probably disconnecting without first ejecting.
It's not permissions; try running +*Repair Disk+* on them, per #A5 in Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).

External drive is suddenly read-only, yet is formatted for Mac

I've had a 1TB external hard drive for the last year and never had a problem with it until now. Suddenly, it is showing as read-only, however, it's formatted for Mac. How am I able to fix this? Do I have to re-format it?

Usually that means the drive is malfunctioning. Back up all data on it, if you haven't already done so, then erase and restore. If you ever have another problem with the drive, replace it.

NTFS Partition on external HDD changed to read only after failed eject

Hi all
I have a Mybook studio split into 2 partitions, a NTFS one and a HFS+ one. After removing the USB cable too quickly following the eject my NTFS partition is read only [I checked using 'get info'].
I need to change this back and I'm stumped - please advise
Many kind regards in advance

Thank you all very much for the advice you have given me. I attempted to make changes with NTFS3G - i upgraded to Tuxera NTFS [which REALLY screwed up everything] - and got a monstorous error message. Disk utility was no good to me either telling me to reformat.
For anyone reading this thread in search of a solution - I used bootcamp to load up my Win7 Partition and then repaired the disk using the built in utility accessble from right click> properties.
It appears there was some corruption causing my problem (?) as it created a folder called found.000 which has a random assortment of files from all over the partition in it. Hopefully it found all the lost data but I have no way of comparing it's before and after state.
Moral of the story - NTFS isn't quite ready for Mac yet, at least in my experience.
Now if only we could get time machine to work with NTFS..
Cheers again to you all!

Hard Drive Not Mounting After Being Magically Changed to Read Only

I was using a firewire connected, verbatim 1tb drive as a time machine. Everything had been working fine, but I walked away from my laptop for the morning and came back this afternoon to find my hard drive changed to read only. Time machine wouldn't back up to the hard drive; so, I rebooted.
Since then, I haven't been able to get the hard drive to mount. It won't show up in Drive Utility or on the desktop. I have rebooted the hard drive, unplugged it, turned it on and off.
What should I do? How do I fix this? It has my backups and my music. I'm no amused.

I've had exactly the same trouble this morning.
I'm using a MacBook Pro with my Time Machine on a portable Hard Drive. When doing my regular back up the computer froze. I force restarted the computer and the TM drive came up as 'Read Only'.
So, I rebooted again and the drive is not mounting at all. I can see it connected through System Profiler, however the drive isn't showing up in Disk Utility.
Does anyone have any ideas? Coz I don't seem to be the only one with this issue.

External hard drives suddenly changed to read only

Three of my external hard drives suddenly changed to read only. These hard drives have been working on my macbook pro for months. When I click on get info 'read only' shows up and there is no lock icon nor is there a window that shows name | permissions, also in disk utility the 'verify disk premissions', 'verify disk', 'repair disk', and 'repair disk premissions' buttons are ghosted and I can not select them. I have not made any changes to my computer and I have read many other posts and have not been able to find a solution.

About a hundred times with no luck. Some of my research is leading to Western Digital, there may be a problem with the drives' 'smartware' software. I've been using this drive for months and I never used the 'smartware', but I tried it anyway with no luck. I just remembered that four days ago I had this drive plugged this drive into an Iomega wireless storage device and it seemed to work fine. Now the wireless storage device can't find the drive at all. I just need to know if there is a way I can change the permissions back to read/write, otherwise I will have to buy another drive and transfer all the data to the new drive and re-formatt the wd drive.

External Hard drive Permissions changed to "read only"

I use a Seagate Slim Drive (500GB) on my Macbook Pro (Late 2012, Retina, 13"), to store movies and tv shows and whatnot. Last night, I was watching a movie and everything was fine. I ejected the drive after use and it stayed that way overnight. This morning, I tried to connect it, but the partition refuses to mount. I got a friend to help me run command prompt diagnostics using terminal, which revealed that the permissions had suddenly changed to "read only". I really need to access the data on this drive because some of the movies in there are part of an important project that could hopefully land me job. Any help is welcome.

1. Select the external hard drives icon
2. Right-click > Get Info (cmd + i)
3. Expand the Sharing & Permission column
4. Click on the lock at the bottom right
* You will be prompted for an administrator name and password *
5. Once unlocked change the permission for user, group & everyone to read & write
6. Click the little gear right below and select “Apply to enclosed items…”

My External Seagate Hard drive just changed to read only

my External Seagate Hard drive just changed to read only on its own?
I went to get info and scrolled down to the Sharing and Permissions
But there is nothing there but a greyed out : You can only read
There are No boxes to check or uncheck, No options to change to read and write, No name of owner or ignore ownership box. NOTHING ELSE IS THERE
HELP!
I have recently upgraded to Mountain Lion and am having other problems as well

Click on the external HDD icon COMMAND+I. You should see a display such as this:
You should be logged on as the administrator. Click on the lock icon. It should open and allow you to make the required changes.
Ciao.

External hard drive suddenly become read only

For those who have been using an external hard drive on OS X (using NTFS file system) without any problem and suddenly one day the system has started mounting it as a read only file system, this is because the file system right now has some inconsistences.
As it happened last night to me i started googling for a quick solution to solve the problem. But i didnt find anything out there. At least at first glance. So then i checked the system logs of the system in order to get some sort of specific information about why that was happening (in OS you have an application that makes so easy to have a look through the system logs and its in /applications/utilities/console.app). In my case, and i repeat, IN MY CASE, the problem was the following:
21/07/11 18:59:02 kernel NTFS-fs warning (device /dev/disk1s1, pid 2140): ntfs_system_inodes_get(): $MFTMirr does not match $MFT. Will not be able to remount read-write. Run ntfsfix and/or chkdsk.
So afterwards once known the problem, was as easy as to mount the external HD in windows and execute the command chkdsk /f (google about the usage of the tool if dont know how it works).
Alternatively, you have the Linux option using the ntfsfix command, but you will need to install the program before that (if dont have it previously in your system) or otherwise you won't be able to use it (sudo apt-get install ntfsprogs)
Hope it helps.
Marc

I got an error message that my External Hard Drive was now 'read only'. Having scoured the various forums looking for clues as to why it had happened I found numerous suggestions, all of which seemed overly complicated and beyond my basic understanding (I'm old enough to remember when Macs 'just worked').
Anyway, among the suggestions on how to correct this I found what seemed like an overly simplified one - 'Don't switch on your external hard drive until after you've booted up'. Since I tend to leave mine on all the time, I immediately turned it off and back on again and ran Time Machine in hope rather than expectation. Would you believe it? It backed up as normal first time. Hope it works for anyone else having the same problem.

I have a FAT 32 External Hard Drive marked as Read Only that is unchangeable by an administrator or root user, how can I make it read/Write

Hello, All,
I have a FAT 32 External Hard Drive marked as Read Only that is unchangeable by an administrator or root user, how can I make it read/Write without reformatting it ?

Hi Kappy,
Just wondering if you had any advice for my situation . . .
My time machine backup was backing up to a drive that was "Mac OS X Enteded Journaled, Case Sensitive." I had no idea what this meant, or that it would even cause issues.
I took my computer to the Apple store yesterday, and they wiped it clean. When they tried to restore it from the Time Machine backup drive, it would not work. Their guess is that Time Machine cannot restore from a drive that is "case sensitive."
Any thoughts on how I can convert my time machine backup data from a "case sensitive" state, to a "non-case sensitive" state? I've tried to just drag and drop the files from the case sensitive formatted drive to a new drive that I have that is formatted non case sensitive, but I get the following error message:
"The volume has the wrong case sensitivity for a backup"
I just really want my data back - I thought TimeMachine was the way to go (and was supposed to work) but unfortunately it is not.
Any help you can provide would be greatly appreciated.
Thanks,

External drive changed to read-only

Similar Messages

Maybe you are looking for