External drive does not show up in finder/ disk utility not able to repair

Hello,
My external drive does not show up in finder. But it appaers in DISK UTILITY. When I tried to repair it, it said:
Verify and Repair volume “ANNE HD”
** /dev/disk1s1 (NO WRITE)
** Phase 1 - Preparing FAT
** Phase 2 - Checking Directories
Unable to read directory (Input/output error)
Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
How can I back up files if the external drive is not found in FINDER? I tried to restore with disk utility, but it doesn't seem to be able to select the hard drive.
Can you please help me?

Thanks a lot Niel,
Diskwarrior is a program for what you need to buy a DVD. I live in Brazil I have no idea where to buy it. Or can you download it?
A

Similar Messages

1 TB External WD Drive Not Showing Up In Finder/Disk Utility/Terminal

Hey everyone,
First time posting here so forgive any mistakes. I recently purchased a Late 2013 Macbook Pro Retina, 15-inch, 2.6 GHz Intel Core i7 from Apple. Previously, I had the late 2007 Macbook Pro model until a friend spilled some water on it and corrupted the motherboard. Regardless, I was using a Western Digital 1 TB external hard-drive to keep all my documents and files backed up, manually, alongside the time machine feature built in. (This was not connected at the time of the spill, and was not thereafter, so rule out water damage) During the period between when the old one died, (earlier this year May-2013), I kept the drive safely in storage because I knew I would want to transfer my 100gb music librairy along with my photos and other files when I finally got the new one later that year (was waiting for the hardwell processors to come out for the MBP). Just recently after this purchase I tried to connect the drive to my new MacBook Pro but it was not showing up. I have scowered the online forums for trouble shooting tips and took all the steps to no avail. I have replaced the data-drive cable with a new one, connected it to the wall outlet in case it wasn't drawing enough power from the laptop, among a few other simple tricks, but still it would not show up in either Disk Utility or the terminal command to show all active drives, all that's there is the internal Macintosh HD one. It was a fairly quiet drive-however I do notice there is not much of a 'spin-up' noise or any sound of it begining to work when turned on or plugged in, so I'm worried there might be something wrong with the drive itself. Nonetheless, the power signal continues to flash but still no recognition from the computer that it's there, so I'm certain it's not reading it. I have tried on my other buddys Mac and it is the same situation, as well as my roommates PC (which I figured wouldnt anyway because of how its formatted, but it was worth a shot) I am not sure which avenue to take next as I have all my files and college work that I still need access to on the drive, and would really hate to have to format the drive or anything drastic as such. Possibly there is a part I can buy and replace myself to make it start up and spin again, but I am not sure what that part could be or if there is an easier solution out there.
I would greatly appreciate any information or help on this problem, thank you all for the time and advie.

Clicking from a hard drive is bad. Does the external drive have an external power supply? If it does I would use this supply.

My external HD is not showing up on finder, disk utility or system information.... Hd is working fine on windows computer so there is nothing wrong with it...Help!

Mac is showing up other external hard disks....but not my seagate one

Clicking from a hard drive is bad. Does the external drive have an external power supply? If it does I would use this supply.

I installed the latest security update now my Lacie external drive won't show up in finder. Any Help?

I installed the latest security update now my Lacie external drive won't show up in finder. Any Help?

Does it show up in Disk Utility?
See mount section in 1st linked article.
Disk Unmount Using Terminal
Disk Utility – Force Mount Disk

External drive won't mount on desktop or disk utility

iMac w/optical drive, running 10.6.8
Using a 2 TB Seagate Backkup drive for Mac for Time Machine backups. Time Machine notified me that no backups had been made for 22 days. Drive icon does not show on desktop and is not listed in Disk Utility. Tried unplugging/plugging power and USB cable without success. I had shut down the computer before leaving for vacation (about 22 days ago), but am pretty sure I did not move the drive icon to trash. Could this be the basis for the problem?
How do I get this drive mounted again?

Eric, nifflerX and nbar:
That's what I was afraid of.
Thanks for your help.
Stonely

WD Elements not showing up anywhere but Disk Utility

Ok so I got my MacBook Air and WD Elements External HD for Christmas 2013. I have been using both nearly everyday since then and they've been working perfectly, no faults. Except this morning, when I plugged in my HD, I found that I couldn't access it at all, but it showed up in Disk Utility. I really need to get this problem fixed, with out losing any of my files. This HD has all of my files on it, including all of my photos. It is 1 TB. Thank you.

First, just to make sure, Go to file at the top of the desktop under file/ preferences/ and see if show disks are still checked. If so run disk utilities if you haven't already done so, repair the disk and the preferences. See if that helps.

External hard drive doesn't show up in finder or migration assistant

Hello all,
I'm new to this forum and pardon me if this question isn't posted in the right category.
I recently broke my old macbook pro to the point it was inoperable. I extracted the hard drive which appeared to be in good shape, put it in an external enclosure & plugged it into my new macbook pro via usb and it's not showing up in finder, disc utility or migration assistant. I'd like to import my old music, pictures & documents if possible. I'm curious why it isn't showing up and how I can make migration assistant work?
Hope everyone had a good Christmas and a happy new year!
Thanks,
Andrew

Disk Utility – Force Mount Disk
See mount section.
Disk Unmount Using Terminal

External Hard Drive does not show up in Finder

My external hard drive is not showing up in Finder.
It shows up in Disc Utility, but I do not have access to it. I have tried the following:
command-shift c, nothing happens
confirmed in Preferences/General that external hard drive was checked
tried another cable
tried another port on the back of the external drive
tried to connect through the USB port
re-started, etc.

zone-5 wrote:
I have same problem after installing OS 10.5.8. Disk utility sees the hard drive, the computer does not. Disk utility says invalid node structure. Volume check failed. Filesystem verify or repair failed.
That means the directory is corrupt. If you have a heavy-duty 3rd-party disk repair app, such as +Disk Warrior,+ it may be able to fix it. Otherwise, your only option is to erase and reformat the disk. They're not cheap -- Disk Warrior is about $100. And for Leopard, you need version 4.1.1 or 4.2.
I have not been able to figure out how to start a new topic here, but did find this discussion, which fits me fairly close.
Just above the list of topics, on the left, is a +Post New Topic+ option.

External hard drive not showing up in finder

Hi,
I have a LaCie Rikiki USB 3.0 1TB external hard drive for more than a year or so (probably longer than that). The hard drive has 2 partitions with one formatted as Mac OS Extended (Journaled) <named MAC> and the other MS-DOS (FAT) for windows <named as FOR WIN>.
The MAC volume has been working fine yesterday then suddenly it just started to transfer files very slowly and had problems unmounting when I am done transferring files saying it is in used by an application when it is not. So I had to force eject the the MAC volume while the FOR WIN volume ejected fine. However, here comes the problem.
Once I reconnected the external hard drive, it does show up in disk utility but not in finder. Also, the FOR WIN volume showed up as disk1s2 in disk utility. I tried using disk utility's verify and repair disk and couldn't fix the FOR WIN volume so I gave up on that since I don't have any important files in that volume. On the other hand, I could run verify and repair to get the MAC volume mounted. Through that I could get some files copied but soon finder hangs on me and wouldn't open even after relaunch which led me to disconnect the drive by just unplugging the USB. Now when I connect the drive, it again shows up in disk utility but not mounted and when I try to use the verify and repair all I get is:
Verifying Volume "MAC"
checking file system
Error: This disk needs to be repaired. Click Repair Disk.
Verify and Repair volume "MAC"
Checking file system
Volume repair complete
Updating boot support partitions for the volume as required
and it's stuck at "updating boot support........" I've let it ran for like 6 hours and it's still at that stage. Had enough, closed disk utility and reconnected the harddrive and it's still the same showing up in disk utility but not mounting.
Could anyone please help? Thank you!

tonydenson wrote:
That's great thanks. cmd-shift-c brings it back.
then it should also show up on the desktop. go to finder preferences->general and check the boxes to show external and CD drives.
Incidentally, I now have the opposite problem, I can't eject it. I get the message that the disk is in use, try quitting applications. I quite often get this with mounted drives or flash drives. Is there any way of finding out which particular application has a given device open ?
sometimes spotlight keeps drives busy.
you can see what's doing it by running the following terminal command
sudo lsof /volumes/lacie

How do I access an external hard drive that shows up in Disk Utility but will not show up in finder or on my desktop?

I have an external hard drive that just stopped showing up one day. Is there a solution to this problem that allows me to secure the data on the drive before reformatting?

I'm having the same problem bpay14, but with a CalDigit VR2 6TB RAID0 external hard drive.
One day it was showing on my desktop, the other it wasn't. And I still didn't update my Mavericks to 10.9.3 (still with the 10.9.2).
It shows up in the disk utility, and I can even Verify the disk and Repair it (but I don't wanna start repairing
something that probably doesn't need to be repaired, so I haven't clicked the Repaid button, only the Verify button) and it says its working just fine.
But it doesn't show in the Finder or the desktop for that matter.
And even if I force disconnect the cable, I get the usual "this disk was not ejected properly" notification
presumingly the disk was mounted on the desktop and I forced eject by unppluging it...
I found a way to force open the disk, through Disk Utility that's by clicking with the right mouse button
on the disk icon, and chosing OPEN "CalDigit AFRICA 6TB"... (see picture 1)
But... after that, it open a Finder window showing all my internal and external drives, but that drive's
name is in washed grey, like if it was unmounted (see picture 2).
When selected, I can see everything and work normally on the harddrive, even opening FCPROX projects or Libraries, copying from it and writing documents into it... just normal... (see picture 3)
BUT IT DOES NOT SHOW IN THE DESKTOP...
that's my problem...
I even did a Command+i for Info on the hard drive. (see picture 4)
Can anyone shed some light on this issue?
I would be eternally grateful!
Thanks in advance!!!
Cheers!

External drive does not show up in Time Machine

I just applied the lastest update today and now my external drive does not show up in Time Machine. It does show up in Finder.

Gracias Sir Kappy, These instructions didn't include Yosemite, but I followed the closest and used Mavericks instructions and the command-R was the key, which I suppose means 'restore?' Nothing is explained as we should all be able to read the programmers minds by now...
Thanks for the help and problem resolved.

External hard drive connected and running time machine backups but icon not showing up in finder

My external hard drive has been connected for a couple of years and is using time machine perfectly. i am trying to save my iphoto library on the external drive but the icon is not displayed in finder. Only time machine icon is displayed......thanks for your help!

Did you create a second partition for your iPhoto Library or did you just use the same single partition that TimeMachine is on?
Formatting & Partitioning a Hard Drive in OS X
Apple Tips: Using Disk Utility 3. Add a Partition

My external hard drive doesn't show up in finder, is it dead?

My external hard drive doesn't show up in finder.Time machine can't find it. Does this mean my external hard drive is dead?
I borrowed a friends and switched mine with hers. My acted the same way in her macbook. I switched the cords on the external drives, no change.
Also, Is there a way to retrieve the information from my sick external hard drive? Thanks for your help.

If the Disk Utility sees it, you might be able to repair it or recover the data on it with a product such as DiskWarrior or Data Rescue.
If the Disk Utility doesn't see it, contact professional support.
(64290)

Recently got a new computer and installed itunes from external drive - all music shows up in the library, however when i click on a song i receive this message "the song could not be used because the original file could not be found". What do i do?

I recently got a new computer and installed itunes from which had been saved onto an external drive - all music shows up in the library, however when I click on a song I receive this message "the song "abc" could not be used because the original file could not be found". What can I do?

I was given the option to locate the file where the song is held. If so select "locate" and direct it to the folder / file where the song is and open it. itunes then will give you the option to use this process to update all of your library. OK that as this will do it automatically instead of doing them one by one. I hope this helps.
Martin

External Drive does not mount with Firewire but is ok with USB !

Since 10.4.4 my external drive is no more recognized using firewire, but it mounts perfectly with USB
Using FW request me to reinitialize the disk, but then, the apple disk utility it is unable to reformat!
then I unplug FW , sets USB and everything is ok!
I connected the drive to my old IMac G4 700 and evrything is fine, FW and USB, using the same drive, using the same cable. I did repeat the test many times it is always ok with the old mac and it never mounts with FW on my newer Ibook.
I did reset the openfirmware but that was not successfull!
Then I brought both iBook and the faulty Drive to a friend (he owns a powerbook and also an external drive)
we verified that my drive does not mount on his powerbook G4 12" using FW and is ok with USB.
Then he tried his external drive and was very surprised to find the same fault with his drive and his PB using FW. (as for me everything is ok with USB!)
We are both very puzzled, our drives did work well before, (before 10.4.4 , and 10.4.5 did not improve!)
and now, with firewire,disks never mounts..
In addition I tried with the same cable to alternatively start, using the target mode, the ibook and the imac. For each test they were both recognized as external drives as they should..
So to try to sum up
- Disk mount ok with USB (1 or 2)
- Disk is no more recoknized with FW (but it was before with the exact same hadrware)
- FW Cable seems to be ok as targuet mode works properly
has anybody any idee?
It would be very munch appreciated..
thanks a lot for having read this long post..
External hard drive P/N:
the western digit disk 160G is in an enclosure referenced
Prolific PL3507 Combo Device
I tried to exchange the disk of this box with an old maxtor with the same bad result!
IbookG4 1.2 & IMac G4 700 Mac OS X (10.4.4)

Hi Andre, I can't remember except to say that it was mounting fine with tiger and I was able to copy files to it for backup purposes.
I just hooked it up to a PC and windows tells me the drive is not formatted. That's not a good sign, and this was stupid: I think I had the drive hooked up to my Mac Pro during the upgrade.
Idiotic, granted. But this was an upgrade, not a full install and I maybe was trusting in Apple's ability not to do extraneous stuff during an install like windows does. Oh well...
I appreciate any further ideas. Many Thanks, Frank.

External drive does not show up in finder/ disk utility not able to repair

Similar Messages

Maybe you are looking for