External Drive Drove my Macbook Pro(Late 2011) Mad!?

when i remove my external disk, the system just stuck there. I checked the system, and it was the finder who was not responding. Then i tried to shut it down, but only forcing MBP off.
What's the matter with my MBP? My external disk is NTFS format.
I put that external disk on another MBP to check the potential crackdown, only to find nothing wrong.
I need your help.
Thanks

I know it is not a optimal choice for Mac using NTFS, but i have to copy large files back and forth between PC and Mac.
Actually, i ejected the disk, it was the procedure of ejection that cracked. when dragging the icon of external disk to recycle, the system stuck there.

Similar Messages

Has anyone used a 1.44 usb floppy drive with a MacBook Pro late 2011 model ? I have photos of my children i would like to recover.

I have photos on 1.44 floppy disk and would like to copy them to DVD, has anyone used a 1.44 usb external drive with a MacBook Pro (late 2011)? The disk where made on a PC from 1990 -94 the images are in .img and .jpg.

Hello riflemanpro,
Thank you for using Apple Support Communities.
For more information, take a look at:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
Have a nice day,
Mario

Both Internal hard drives fail on Macbook Pro late-2011

Both internal hard drives (SSD and HDD) failed on Macbook Pro late-2011.
Setup: MBP closed with Thunderbolt display attached.
Problem on HDD-A
I called Apple Support to log an issue with my MBP2011. The system is made up of 2 drives - SSD (128GB) and HDD with 2 partitions HDD-A and HDD-B(original 750GB).
HDD-A has LionOSX 10.7 and HDD-B is storage. SSD has LionOSX on it as well. I normally boot HDD-A.
I was working on HDD-A and the Kernel Panic screen appeared prompting me to shutdown the machine and start it up again.
I tried to reboot HDD-A and the grey progress bar appeared for a long time. I then forced shutdown and rebooted into SSD.
I was able to boot from SSD and then I opened Disk Utility to check the drives. I verified the disk for HDD-A and there was an error. I then tried to repair disk and it couldn't repair it. A dialogue said the disk could not be repaired and that data should be backed up.
HDD-A was not visible in Finder but HDD-B was accessible.
I verified HDD-B and it was "ok".
I shutdown, booted from SSD, disk utility HDD-A and the same message occurred.
I called Apple Support and they advised that I boot from my external HDD which was a clone of HDD-A.
Solution
I was successfully able to boot from the Clone HDD-A.
HDD-A was able to be accessed and I could retrieve the files from HDD-A.
I copied over the latest files from HDD-A to an external drive.
Same Problem on SSD
Boot from SSD, i started working for about 3 hours, with the lid closed, and attached to the ACD.
Kernel Panic screen happened again on the SSD.
Couldn't boot boot from either SSD or HDD-A.
I booted from Cloned HDD-A, Disk Utility verify and repair returned errors on SSD. The same issue had occurred on the second drive.
Disk Recovery from a boot recovery USB thumb, Disk Utility, erased SSD, verify was ok.
Tried to install then there was an install error saying that SSD was damaged (large triangle warning icon). Tried 3 times, failed.
Boot from Recovery Drive HDD-A, downloaded LionOSX.
Next steps
Format HDD-A and HDD-B into 2 partitions
Install LionOSX on HDD A.
Note:
I did not do any software updates for about a week before 14.04.2012 and suspect it might be due to the virus.
I normally work with the lid closed and attached to the ACD, I also suspect that overheating caused both drives to fail. However, I have been using this system with the lid closed for atleast a week. One Kernel Panic screen occured.

Depending on what you are doing on the computer, how hard you are working the computer, it should not overheat. And if it does it should shut down or get very slow because when it starts to overheat the CPU will be throttled back to a lower Ghz speed and or just shut down so it doesn't cause damage to the CPU. The Kernel Panics are a sign that something else is going on. This could be software or hardware.
If after wiping the drives and reinstall Lion on the SSD if the system is running OK then the drives are fine, IE they are not bad. There is something else corrupting them. Again this could be hardware or software, but I doubt it is heat. And using the MBP ion clamshell mode should not cause overheating or excessive heating of either of the drives.
Have you installed iStat Pro or Menu and kept and eye on the temps? If not install iStat Pro and keep and eye on the temps. I bet they do not get above the 150°- 180°F mark which although hot is not overheating.
Be very careful when calling Apple. Removing the DVD drive and installing a hard drive in that bay could void your warranty. The DVD is not a User Removable part and Apple frowns on doing that. So if you call them do not mention that you have replaced the DVD drive with another HDD.
Honestly I suspect you have a hardware problem. But the only way to know that is to install just Lion and your basic programs and run the system. Leave out any AV type software, if you are running some. If you don't get any kernel panics thenn install some of your other software, one programm at a time. If with just the OS and basic software you get a kernel panic then it is hardware related and needs to be checked out by Apple. If you do that re-install the DVD and the original HDD with just the OS on it before you take it in.

Dual External Monitors with 15" MacBook Pro (Late 2011)

I'm looking for suggestions for using dual external monitors with new MacBook Pro's. The company I work for has started to puchase these for certain employees and we are looking for any good suggestions.
It appears that the display/thunderbolt port should be able to support many devices but I have not seen any way to hook up multiple displays. The idea is that these employees would be working with the macbook pro screen closed while in the office and use dual displays. The only option that I can find is to use a usb device to output video to a second display. I don't really like that because my experience with these devices is that they usally present a display lag and I know our graphic designers would never go for that.
One employee suggested that he use the VGA adapter and then get a VGA splitter. I'm not exacty certain that would work though. Wouldn't that just mirror the display on two screens instead of allowing an extended desktop? Also it looks like expensive Apple displays have ports so that you can daisy chain thunderbolt devices out of those monitors but this company will not go for the cost of those displays.
Am I missing anything? Any suggestions would be helpful.
Thanks!

Look into the Matrox Dualhead2Go DP Edition. If it works with Thunderbolt Macs, it will support two identical 1920 x 1080 DVI monitors as one extended desktop. Verify with Matrox that it is Thunderbolt-compatible and will suit your purposes before ordering.

What external drives work well with a late 2011 MacBook Pro? I ask because I just found out the hard way that a Samsung EVO 840 does not. Also should I avail myself of something that works with Thunderbolt or Firewire?

What external drives work well with a late 2011 MacBook Pro (I7, Lion OS) apart from my Kingston flash and USB drive, and the SD drives that I use in my cameras and recording devices? I ask because I just found out the hard way that a Samsung EVO 840 does not. Also, should I avail myself of something that works with the Thunderbolt or Firewire connections? I'm looking to back up music and video files created and/or processed in Logic Pro and the Adobe Production Premium software suite (Premier Pro, After Effects, Audition, etc).

Hmm, not sure what problems you had installing this drive. The review here gives it good marks for Mac:
http://www.amazon.com/Samsung-Electronics-EVO-Series-2-5-Inch-MZ-7TE1T0BW/produc t-reviews/B00E3W16OU
There does seem to be a lot of prep to make it work:
"1. Preparation to install your new shiny SSD
1.a You will need a migration tool (I used the Sabrent kit USB 3.0 to Sata that was suggested in these review) see link http://www.amazon.com/gp/product/B00DQJME7Y/ref=oh_details_o03_s01_i01?ie=UTF8&p sc=1
1.b You will need to download a trim enabler (mid 2012 macbooks only support native trim with apple brand ssd's) I recommend going to cindori.org and downloading trim enabler version 3.xx. You can do this step before or after the OS migration
1.c You cannot use the Samsung SSD migration software *don't worry Mac has its own imaging/migration utility*"
Also in those reviews:
" Only down side when using this product in a Mac Mini is you will be required to download and install Trim Enabler so that your drive performs optimally on your Mac device. This is an Apple issue, not Samsung, but it is an extra step you will have to take after you install the hard drive, and any time you perform an OS upgrade." He rant's on.
Personally I only deal with OWC:
http://eshop.macsales.com/shop/SSD/OWC/
They are very knowledgable and if there's a problem they will gladly take back the item. (Never happened to me yet - 8 years and counting).
Just upgraded my 13" MBP 2011 to 120 GB for $79. Adobe CS 6 opens in 3 seconds! Awesome!
When I was in Chicago I had a pro photographer for a client. She wound up with 4 internal drives in her Pro, 4 external drives and an dual array locked in a steel vault in the basement. All from OWC. OK she was a bit paranoid. Great client though.
As far as value for price:
http://eshop.macsales.com/item/OWC/MES3FH7500G/
500 GB for $130.
However as far as reliability is concerned:
http://www.rockpapershotgun.com/2014/01/30/are-ssds-reliable/
http://www.extremetech.com/computing/173887-ssd-stress-testing-finds-intel-might -be-the-only-reliable-drive-manufacturer
So sudden power loss is an issue with SSDs.
Personally I'd go with a moderate sized SSD internally and a conventional external for backup. An array would be the most reliable.

MacBook Pro Late 2011 : Optical Disk Drive not working?

MacBook Pro Late 2011 : Optical Disk Drive not working?
When i try to a put in a cd or dvd; it rejects it automatically within 10-15 seconds.
I have resetted SMC and PRAM; no chages.
Don't know what to do. Please help.
Thank you.

Clean the heads.
check to see if it is under warranty.
buy external DVD/CD rw

I have a MacBook pro late 2011 version it's not booting up so I am trying to boot from a USB recovery drive but when I select it nothing happens it jus goes to the restore options

I have a MacBook pro late 2011 version it's not booting up so I am trying to boot from a USB recovery drive but when I select it nothing happens it jus goes to the restore options

Bahamaguy wrote:
I have a MacBook pro late 2011 version it's not booting up ....
So what you want is to be able to boot from OS X and retrieve your files
Create a data recovery/undelete external boot drive
Of course if it's not booting up, it's easier to fix in place
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/
...so I am trying to boot from a USB recovery drive but when I select it nothing happens it just goes to the restore options
"Recovery HD" is a partition on your boot drive which you option or commnad r key held at boot time to get into and then repair the Macintish HD partition.
If you have this on a external USB thumb drive, then that's all it is, no OS X, programs or files.
If your talking a USB external drive, it has to be a OS X bootable clone made with Carbon Copy Cloner or SuperDuper and the option key held at boot time gives you that boot option.
Most commonly used backup methods
So what your saying is you have a external clone and by holding the option key down at boot all you get is it directly going to Recovery HD?
There is no Startup Manager option to choose what to boot from?
This could mean Apple changed something, or your external bootable clone isn't one, or the wrong software used so it's not being recognized by Startup Manager as a bootable option.
What did you use to make the external OS X USB bootable drive?

MacBook Pro Late 2011 10.7.5 won't detect external monitor

Hello,
I have a Macbook Pro Late 2011 13" Running OSX Lion 10.7.5. It won't flash blue at ALL when connected to an external display. Under system report, it shows that the "Link Status" is 7. The same setup works with another MacBook Pro Mid 2009 15 inch. I am under AppleCare, should I take it in? Weird. All firmware updates are completed, no "Air Display" type programs are installed currently, and gfxcardstatus is also installed and doesn't really help.

Looks like a problem with the GPU (possibly the screen, but it looks more as if it's the GPU). If I were you, I'd take your machine into your local Apple Store or an AASP and have it diagnosed.
Clinton

I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers?

I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers? Thank you for the help!

Have you looked on Lexmark's support site?
http://support.lexmark.com/index?page=content&id=OS23&locale=en&userlocale=EN_US

Osx 10.8.4 does not run macbook pro late 2011

does any have issues after installing osx 10.8.4??? because i have an issue after i update my macbook pro late 2011 ,it doesn't start and only stay on the mac logo and appears the pointer i restarted many times and does not work the only option i had is to reinstall the osx 10.8.3. can anybody help me with this issue?? thank you.

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Installing window 7 to macbook pro late 2011

I am trying to install Windows 7 to a Macbook Pro (late 2011). I got this far: After downloading Bootcamp 5 and going into Bootcamp assistant and clicking both, a) Download the latest windows support software from Apple, & b) install Windows 7 or later version.
NEXT: Installed external 8G usb drive for Windows support software to download to
NEXT: In about 10 seconds it downloads then never moves on the "visual" download scale???????? THIS IS WHERE I GET STUCK
ANY HELP WOULD GREATLY BE APPRECIATED

Welcome to Apple Support Communities
As it looks like you can't download the Windows support software from Boot Camp Assistant, download it at the Apple site > http://support.apple.com/kb/DL1638 Follow the steps to burn it to the USB drive.
Then, open Boot Camp Assistant and install Windows. Don't mark the option to download the Windows support software

Macbook pro late 2011, completely messed up, everything I click it brings up beachball very slow, blue ray and hd unwatchable as it jerks. genius bar app didnt help at all, very disappointed, can some1 help me?

Macbook pro late 2011, completely messed up, a macbook pro of this year should not be operating like this, everything I click it brings up beachball very slow, blue ray and hd unwatchable as it jerks. genius bar app didnt help at all, very disappointed, can some1 help me?

You have a hardware problem. It is probably the hard drive is either to full, not enough free space, or it is starting to fail.
If you have an external drive connec that to the system and use the Recovery HD, Command + r keys at startup, to install a clean fresh copy of OS X Lion on the external then run the system from that. It will be slower but if you don't get the beachball then that is the sign your internal drive is on its way out or is filled up with files and not enough free space.

Macbook pro late 2011, version ......DV14 getting very hot

Macbook pro late 2011, versin ....DV14 getting very hot

Bahamaguy wrote:
I have a MacBook pro late 2011 version it's not booting up ....
So what you want is to be able to boot from OS X and retrieve your files
Create a data recovery/undelete external boot drive
Of course if it's not booting up, it's easier to fix in place
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/
...so I am trying to boot from a USB recovery drive but when I select it nothing happens it just goes to the restore options
"Recovery HD" is a partition on your boot drive which you option or commnad r key held at boot time to get into and then repair the Macintish HD partition.
If you have this on a external USB thumb drive, then that's all it is, no OS X, programs or files.
If your talking a USB external drive, it has to be a OS X bootable clone made with Carbon Copy Cloner or SuperDuper and the option key held at boot time gives you that boot option.
Most commonly used backup methods
So what your saying is you have a external clone and by holding the option key down at boot all you get is it directly going to Recovery HD?
There is no Startup Manager option to choose what to boot from?
This could mean Apple changed something, or your external bootable clone isn't one, or the wrong software used so it's not being recognized by Startup Manager as a bootable option.
What did you use to make the external OS X USB bootable drive?

MacBook pro late 2011 i7 8GB 750GB MAC OSX Lion freezes on wake up

Hi,
My MacBook pro late 2011 i7 8GB 750GB MAC OSX Lion (up to date) 1 week old freezes on wake up.
Plugged on power or not, same issues.
No apps running.
When it goes to sleep itself i wake it up it freezes for few seconds
When i put it to sleep mode same issue.
With the lid same issue...
I already try setting up the sleep mode from 3 to 0 with terminal command it didn't work.
Can it be an hardware issue ?
Any ideas ?

Dear TheSmokeMonster, Dear all MacBook pro 13'' late 2011 users,
Here is the update.
As TheSmokeMonster mentionned (above) they asked me to reinstall MAC OSX Lion by shutting down the computer and holding cmd + R while switching it off. Then you choose the language and you are good to go for a looooonngg 4GB download (it took me 8hours yeah chinese ADSL :-/ )
Lion reinstalled itself automatically and restarted. - it did not solve the issue.
I called Apple Care again and we try to run the hardware diagnostic by restarting the computer and holding D. FYI do not try it as this command does not work on the new version of macbook pro.
Here is the intersting part! As the Apple Care already did everything they could to help me. We booked an appointment the my local Apple Store in Shanghai (a real one )
The Genius remake again the SMC and PRAM reset - same issues and he also tried to boot Lion from his own external hard drive - Same issues. So we started to think that it was a Hardware problem.
We tried another MBP 13'' late 2011 (last hardware update) in the shop to see if it works properly and it DOESN'T!
Yeah you heard me. I have been trying more than 10 MBP 13'' (2.4Ghz 4GB and 2.8Ghz 4GB) put them asleep and they all freeze on wake up!! it also does it on Mac book air 13'' it seems to be a global issue on all the new 13'' machines. A compatibility problem between Lion and the new hardware architecture of the 13'' ? just my guess.
Anyway FYI this issue doesn't occur on MBP 15 and 17"
I was just amazed by this global problem so was the genuis. We could not find any solutions cause even a replacement one will have the same problem. They told me i could change for a 15" but i had to go back to the Apple shop where i bought it which is 2000Kms away not really convenient So i file the cas and i took my MBP 13'' back with me.
They will contact me later for further explanation.
To be continued.

Internal HD upgrade or external HD for my Macbook Pro (Late 2008)

Hello,
I am finding the 250gb internal hard drive not enough and want to upgrade to a 500gb/1tb hard drive for my macbook pro (late 2008 edition).
What I am wondering is whether to change the internal hard drive OR buy the fastest possible external hard drive for my mac which I believe is one that works with firewire 800 as my late 2008 macbook pro does not come with USB 3.0.
The external hard drive I have found is £110 and my macbook would be using the Firewire 800 connection:
LaCie Rugged Triple 301984 1TB USB 3.0 and Firewire 800 5400 rpm Portable Hard Disk Drive
http://www.amazon.co.uk/Rugged-Triple-301984-Firewire-Portable/dp/B005C2BNJI
I dont necessarily need the portability of a external hard drive. I work with large files (photoshop, illustrator files mainly) and would would be concerned that I would not be able to work directly on the hard drive for this type of work so an internal hard drive may be better/
Can anyone suggest a good, fast, cheap, popular internal hard drive compatible with my computer and whether you would suggest changing the internal HD or buying an external.
I am running Mavericks and the only other change I have made is by upgrading my RAM from 4gb to 8gb. Thanks so much for your help
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 3 MB
Memory: 8 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP51.007E.B06
SMC Version (system): 1.33f8
Serial Number (system): W8******1G0
Hardware UUID: *****
Sudden Motion Sensor:
State: Enabled
<Edited By Host>

For both convenience and speed, I'd recommend replacing the internal hard drive. Your MacBook Pro can handle nearly any internal SATA 2.5" HD on the market, including 7200rpm models. For what it's worth, I'd recommend a Western Digital Black WD7500BPKX or similar or Hitachi HGST 7K1000 although in my experience Hitachi drives run hot and that's the reason I don't use them as internal drives.
FW800 is fine, but then you have an external hard drive to lug around plus the connection is considerably slower than the internal SATA connection used by the internal hard drive.
Note that you will have to either 1) clone your existing drive to the new drive or 2) completely reinstall OSX and all your apps from scratch to the new drive when you replace the internal drive. If it were me, I'd take the opportunity to reinstall everything from scratch.
btw, I have done this myself on a number of 2008/2009 MacBook Pros and it's not hard at all. iFixit has tutorials on how to do this. (Here is a link to the one that I believe is your model.

External Drive Drove my Macbook Pro(Late 2011) Mad!?

Similar Messages

Maybe you are looking for