External dvd, not detecting .mov files

Hi
I have external dvd, its working fine but when I insert dvd with .mov file then its says that your Dvd is blank help me out detect this dvd.
this dvd shows all .mov files when I inserted on my ubuntu Pc.

Hi Hassan,
See these Apple articles:
http://docs.info.apple.com/article.html?artnum=164927
http://docs.info.apple.com/article.html?artnum=93006

Similar Messages

External dvd not detected ?

sorry, but i'm not speak english, i will use google translator ,
the dvd of my toshiba satellite L645D-SP4023M stopped working, I can no longer valid because the warranty has expired, no problem, the only detail or question I have is that I have a external dvd and not I can start (boot) from this reader, I tried using the toshiba recovery discs with this reader and I can not, and set the bios to boot from the usb, esata the entry and nothing happens, I can not boot from the reader external usb reader works fine on other computers, only on my laptop does not start anyone know if my laptop model supports booting from external drives? any solution? once again sorry im from mexico and my English is very little and did not find Latino forums, I appreciate your response

Are you trying to format your laptop? Since your external USB isn't working, you can still format even without the Recovery CD if:
You're still using the original Hard Drive that came with the laptop and haven't installed the laptop with a different Operating System before.
Also if your laptop didn't come with a Recovery CD when you bought it.
We can try doing System Recovery and I can give you instructions on how to do it.

External monitor not detected on Thinkpad W530 intel-virtual-output

I'm having problems with connecting my ThinkPad W530 to external monitors since a few months. I'm using NVIDIA Optimus and bumblebee/optirun since the VGA and Mini DisplayPort connectors are only wired to the NVIDIA card om this laptop. For a long time I have executed:
$ optirun true
$ intel-virtual-output
Then I have started the Screens GUI tool in Gnome to setup the placement of the external screen but now the external screen is not present in the GUI tool and xrandr gives me:
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
LVDS1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
1920x1080 60.00*+ 50.00
1400x1050 59.98
1280x1024 60.02
1280x960 60.00
1024x768 60.00
800x600 60.32 56.25
640x480 59.94
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
If I select "Discrete mode" and select startup screen as VGA in the BIOS the BIOS and the Grub screens shows on the external monitor but the screen locks on the screen that shows that the system is booting with the linux-ck kernel. This has never worked for me in Arch Linux so that is no surprise. In Ubuntu everything everything worked fine the last time I tried.
How can I debug this? Why is the external screen not detected any more?

Thanks, I am not sure exactly how to read the logs but I cannot find anything that is obviously wrong
Below is my log with an external screen connected via Mini DisplayPort and after running:
$ optirun true
$ intel-virtual-output
a few times, no more logs seem to be added when I connect/disconnect the monitor or when I run the above two commands more times.
╰─➤ cat /var/log/Xorg.0.log 1 ↵
[ 2.616]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 2.616] X Protocol Version 11, Revision 0
[ 2.616] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 2.616] Current Operating System: Linux ethuil 3.13.9-1-ck #1 SMP PREEMPT Fri Apr 4 15:50:10 EDT 2014 x86_64
[ 2.616] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-ck root=UUID=25086a9b-a542-4018-9f71-4f492f09be91 rw quiet rcutree.rcu_idle_gp_delay=1
[ 2.616] Build Date: 09 January 2014 08:47:24AM
[ 2.616]
[ 2.616] Current version of pixman: 0.32.4
[ 2.616] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2.616] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2.616] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 14 22:09:08 2014
[ 2.624] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2.624] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2.627] (==) No Layout section. Using the first Screen section.
[ 2.627] (==) No screen section available. Using defaults.
[ 2.627] (**) |-->Screen "Default Screen Section" (0)
[ 2.627] (**) | |-->Monitor "<default monitor>"
[ 2.628] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2.628] (==) Automatically adding devices
[ 2.628] (==) Automatically enabling devices
[ 2.628] (==) Automatically adding GPU devices
[ 2.638] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2.638] Entry deleted from font path.
[ 2.638] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2.638] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2.638] Entry deleted from font path.
[ 2.638] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2.638] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 2.638] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2.638] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2.638] (II) Loader magic: 0x804c80
[ 2.638] (II) Module ABI versions:
[ 2.638] X.Org ANSI C Emulation: 0.4
[ 2.638] X.Org Video Driver: 15.0
[ 2.638] X.Org XInput driver : 20.0
[ 2.638] X.Org Server Extension : 8.0
[ 2.639] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3.588] (--) PCI:*(0:0:2:0) 8086:0166:17aa:21f5 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64
[ 3.588] (--) PCI: (0:1:0:0) 10de:0ffb:17aa:21f5 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 3.588] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 3.589] Initializing built-in extension Generic Event Extension
[ 3.589] Initializing built-in extension SHAPE
[ 3.589] Initializing built-in extension MIT-SHM
[ 3.589] Initializing built-in extension XInputExtension
[ 3.589] Initializing built-in extension XTEST
[ 3.589] Initializing built-in extension BIG-REQUESTS
[ 3.589] Initializing built-in extension SYNC
[ 3.589] Initializing built-in extension XKEYBOARD
[ 3.589] Initializing built-in extension XC-MISC
[ 3.589] Initializing built-in extension SECURITY
[ 3.589] Initializing built-in extension XINERAMA
[ 3.589] Initializing built-in extension XFIXES
[ 3.589] Initializing built-in extension RENDER
[ 3.589] Initializing built-in extension RANDR
[ 3.589] Initializing built-in extension COMPOSITE
[ 3.589] Initializing built-in extension DAMAGE
[ 3.589] Initializing built-in extension MIT-SCREEN-SAVER
[ 3.589] Initializing built-in extension DOUBLE-BUFFER
[ 3.589] Initializing built-in extension RECORD
[ 3.589] Initializing built-in extension DPMS
[ 3.589] Initializing built-in extension Present
[ 3.590] Initializing built-in extension DRI3
[ 3.590] Initializing built-in extension X-Resource
[ 3.590] Initializing built-in extension XVideo
[ 3.590] Initializing built-in extension XVideo-MotionCompensation
[ 3.590] Initializing built-in extension XFree86-VidModeExtension
[ 3.590] Initializing built-in extension XFree86-DGA
[ 3.590] Initializing built-in extension XFree86-DRI
[ 3.590] Initializing built-in extension DRI2
[ 3.590] (II) "glx" will be loaded by default.
[ 3.590] (II) LoadModule: "dri2"
[ 3.590] (II) Module "dri2" already built-in
[ 3.590] (II) LoadModule: "glamoregl"
[ 3.593] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 3.615] (II) Module glamoregl: vendor="X.Org Foundation"
[ 3.615] compiled for 1.15.0, module version = 0.6.0
[ 3.615] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3.615] (II) LoadModule: "glx"
[ 3.617] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3.618] (II) Module glx: vendor="X.Org Foundation"
[ 3.618] compiled for 1.15.0, module version = 1.0.0
[ 3.618] ABI class: X.Org Server Extension, version 8.0
[ 3.618] (==) AIGLX enabled
[ 3.618] Loading extension GLX
[ 3.618] (==) Matched intel as autoconfigured driver 0
[ 3.618] (==) Matched intel as autoconfigured driver 1
[ 3.618] (==) Matched modesetting as autoconfigured driver 2
[ 3.618] (==) Matched fbdev as autoconfigured driver 3
[ 3.618] (==) Matched vesa as autoconfigured driver 4
[ 3.618] (==) Assigned the driver to the xf86ConfigLayout
[ 3.618] (II) LoadModule: "intel"
[ 3.618] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 3.623] (II) Module intel: vendor="X.Org Foundation"
[ 3.623] compiled for 1.15.0, module version = 2.99.911
[ 3.623] Module class: X.Org Video Driver
[ 3.623] ABI class: X.Org Video Driver, version 15.0
[ 3.623] (II) LoadModule: "modesetting"
[ 3.624] (WW) Warning, couldn't open module modesetting
[ 3.624] (II) UnloadModule: "modesetting"
[ 3.624] (II) Unloading modesetting
[ 3.624] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 3.624] (II) LoadModule: "fbdev"
[ 3.624] (WW) Warning, couldn't open module fbdev
[ 3.624] (II) UnloadModule: "fbdev"
[ 3.624] (II) Unloading fbdev
[ 3.624] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3.624] (II) LoadModule: "vesa"
[ 3.624] (WW) Warning, couldn't open module vesa
[ 3.624] (II) UnloadModule: "vesa"
[ 3.624] (II) Unloading vesa
[ 3.624] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 3.624] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 3.624] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 3.624] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 3.624] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 3.624] (++) using VT number 1
[ 3.625] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 3.625] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 3.625] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3.625] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 3.625] (==) intel(0): RGB weight 888
[ 3.625] (==) intel(0): Default visual is TrueColor
[ 3.625] (**) intel(0): Framebuffer tiled
[ 3.625] (**) intel(0): Pixmaps tiled
[ 3.625] (**) intel(0): "Tear free" disabled
[ 3.625] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 3.625] (II) intel(0): Output LVDS1 has no monitor section
[ 3.625] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[ 3.625] (II) intel(0): Output VGA1 has no monitor section
[ 3.625] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 3.625] (--) intel(0): Output LVDS1 using initial mode 1920x1080 on pipe 0
[ 3.625] (==) intel(0): DPI set to (96, 96)
[ 3.625] (II) Loading sub module "dri2"
[ 3.625] (II) LoadModule: "dri2"
[ 3.625] (II) Module "dri2" already built-in
[ 3.625] (==) Depth 24 pixmap format is 32 bpp
[ 3.627] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 3.627] (==) intel(0): Backing store enabled
[ 3.627] (==) intel(0): Silken mouse enabled
[ 3.628] (II) intel(0): HW Cursor enabled
[ 3.628] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3.628] (==) intel(0): DPMS enabled
[ 3.628] (II) intel(0): [DRI2] Setup complete
[ 3.628] (II) intel(0): [DRI2] DRI driver: i965
[ 3.628] (II) intel(0): [DRI2] VDPAU driver: i965
[ 3.628] (II) intel(0): direct rendering: DRI2 Enabled
[ 3.628] (==) intel(0): hotplug detection: "enabled"
[ 3.628] (--) RandR disabled
[ 3.650] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 3.650] (II) AIGLX: enabled GLX_ARB_create_context
[ 3.650] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 3.650] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 3.650] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 3.650] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 3.650] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 3.650] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 3.650] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 3.650] (II) AIGLX: Loaded and initialized i965
[ 3.650] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3.652] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 3.665] (II) intel(0): Setting screen physical size to 508 x 285
[ 3.732] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 3.732] (**) Power Button: Applying InputClass "system-keyboard"
[ 3.732] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3.732] (II) LoadModule: "evdev"
[ 3.732] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3.734] (II) Module evdev: vendor="X.Org Foundation"
[ 3.734] compiled for 1.15.0, module version = 2.8.2
[ 3.734] Module class: X.Org XInput Driver
[ 3.734] ABI class: X.Org XInput driver, version 20.0
[ 3.734] (II) Using input driver 'evdev' for 'Power Button'
[ 3.734] (**) Power Button: always reports core events
[ 3.734] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 3.734] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3.734] (--) evdev: Power Button: Found keys
[ 3.734] (II) evdev: Power Button: Configuring as keyboard
[ 3.734] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 3.734] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3.734] (**) Option "xkb_rules" "evdev"
[ 3.734] (**) Option "xkb_model" "pc104"
[ 3.734] (**) Option "xkb_layout" "se"
[ 3.754] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 3.754] (**) Video Bus: Applying InputClass "system-keyboard"
[ 3.754] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3.754] (II) Using input driver 'evdev' for 'Video Bus'
[ 3.754] (**) Video Bus: always reports core events
[ 3.754] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 3.754] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3.754] (--) evdev: Video Bus: Found keys
[ 3.754] (II) evdev: Video Bus: Configuring as keyboard
[ 3.754] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
[ 3.754] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 3.754] (**) Option "xkb_rules" "evdev"
[ 3.754] (**) Option "xkb_model" "pc104"
[ 3.754] (**) Option "xkb_layout" "se"
[ 3.754] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 3.754] (**) Video Bus: Applying InputClass "system-keyboard"
[ 3.754] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3.754] (II) Using input driver 'evdev' for 'Video Bus'
[ 3.754] (**) Video Bus: always reports core events
[ 3.754] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 3.754] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3.754] (--) evdev: Video Bus: Found keys
[ 3.754] (II) evdev: Video Bus: Configuring as keyboard
[ 3.754] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input16/event14"
[ 3.754] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 3.754] (**) Option "xkb_rules" "evdev"
[ 3.754] (**) Option "xkb_model" "pc104"
[ 3.754] (**) Option "xkb_layout" "se"
[ 3.755] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 3.755] (II) No input driver specified, ignoring this device.
[ 3.755] (II) This device may have been added with another device file.
[ 3.755] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 3.755] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 3.755] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 3.755] (II) Using input driver 'evdev' for 'Sleep Button'
[ 3.755] (**) Sleep Button: always reports core events
[ 3.755] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 3.755] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 3.755] (--) evdev: Sleep Button: Found keys
[ 3.755] (II) evdev: Sleep Button: Configuring as keyboard
[ 3.755] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event2"
[ 3.755] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 3.755] (**) Option "xkb_rules" "evdev"
[ 3.755] (**) Option "xkb_model" "pc104"
[ 3.755] (**) Option "xkb_layout" "se"
[ 3.755] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 3.755] (II) config/udev: Adding input device Integrated Camera (/dev/input/event6)
[ 3.756] (**) Integrated Camera: Applying InputClass "system-keyboard"
[ 3.756] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 3.756] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 3.756] (**) Integrated Camera: always reports core events
[ 3.756] (**) evdev: Integrated Camera: Device: "/dev/input/event6"
[ 3.756] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb2eb
[ 3.756] (--) evdev: Integrated Camera: Found keys
[ 3.756] (II) evdev: Integrated Camera: Configuring as keyboard
[ 3.756] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8/event6"
[ 3.756] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
[ 3.756] (**) Option "xkb_rules" "evdev"
[ 3.756] (**) Option "xkb_model" "pc104"
[ 3.756] (**) Option "xkb_layout" "se"
[ 3.756] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 3.756] (II) No input driver specified, ignoring this device.
[ 3.756] (II) This device may have been added with another device file.
[ 3.756] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[ 3.756] (II) No input driver specified, ignoring this device.
[ 3.756] (II) This device may have been added with another device file.
[ 3.756] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event10)
[ 3.756] (II) No input driver specified, ignoring this device.
[ 3.756] (II) This device may have been added with another device file.
[ 3.756] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[ 3.756] (II) No input driver specified, ignoring this device.
[ 3.756] (II) This device may have been added with another device file.
[ 3.757] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event8)
[ 3.757] (II) No input driver specified, ignoring this device.
[ 3.757] (II) This device may have been added with another device file.
[ 3.757] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 3.757] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 3.757] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3.757] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 3.757] (**) AT Translated Set 2 keyboard: always reports core events
[ 3.757] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3.757] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 3.757] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 3.757] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 3.757] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 3.757] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 3.757] (**) Option "xkb_rules" "evdev"
[ 3.757] (**) Option "xkb_model" "pc104"
[ 3.757] (**) Option "xkb_layout" "se"
[ 3.757] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[ 3.757] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3.757] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3.757] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 3.757] (II) LoadModule: "synaptics"
[ 3.757] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 3.758] (II) Module synaptics: vendor="X.Org Foundation"
[ 3.758] compiled for 1.15.0, module version = 1.7.4
[ 3.758] Module class: X.Org XInput Driver
[ 3.758] ABI class: X.Org XInput driver, version 20.0
[ 3.758] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 3.758] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3.758] (**) Option "Device" "/dev/input/event12"
[ 3.783] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5470 (res 60)
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4498 (res 85)
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 3.783] (**) Option "TapButton1" "1"
[ 3.783] (**) Option "TapButton2" "2"
[ 3.783] (**) Option "TapButton3" "3"
[ 3.783] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3.783] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3.793] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event12"
[ 3.793] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 3.793] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 3.793] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 3.793] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3.793] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3.793] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3.793] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3.793] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 3.794] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 3.794] (II) No input driver specified, ignoring this device.
[ 3.794] (II) This device may have been added with another device file.
[ 3.794] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event4)
[ 3.794] (**) ThinkPad Extra Buttons: Applying InputClass "system-keyboard"
[ 3.794] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 3.794] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 3.794] (**) ThinkPad Extra Buttons: always reports core events
[ 3.794] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event4"
[ 3.794] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[ 3.794] (--) evdev: ThinkPad Extra Buttons: Found keys
[ 3.795] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[ 3.795] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event4"
[ 3.795] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[ 3.795] (**) Option "xkb_rules" "evdev"
[ 3.795] (**) Option "xkb_model" "pc104"
[ 3.795] (**) Option "xkb_layout" "se"
[ 3.799] (II) config/udev: removing device SynPS/2 Synaptics TouchPad
[ 3.824] (II) UnloadModule: "synaptics"
[ 3.824] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[ 3.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3.824] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 3.824] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 3.824] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3.824] (**) Option "Device" "/dev/input/event12"
[ 3.844] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5470 (res 60)
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4498 (res 85)
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 3.844] (**) Option "TapButton1" "1"
[ 3.844] (**) Option "TapButton2" "2"
[ 3.844] (**) Option "TapButton3" "3"
[ 3.844] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3.844] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3.854] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event12"
[ 3.854] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 3.854] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 3.854] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 3.854] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3.854] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3.854] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 3.854] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3.854] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 3.855] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 /dev/dri/card0
[ 3.855] xf86: remove device 0 /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 3.855] failed to find screen to remove
[ 3.855] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 3.855] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-LVDS-1 (null)
[ 3.855] (II) config/udev: removing device Video Bus
[ 3.863] (II) evdev: Video Bus: Close
[ 3.863] (II) UnloadModule: "evdev"
[ 3.863] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[ 3.863] (**) Video Bus: Applying InputClass "system-keyboard"
[ 3.863] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3.863] (II) Using input driver 'evdev' for 'Video Bus'
[ 3.863] (**) Video Bus: always reports core events
[ 3.863] (**) evdev: Video Bus: Device: "/dev/input/event13"
[ 3.863] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3.863] (--) evdev: Video Bus: Found keys
[ 3.863] (II) evdev: Video Bus: Configuring as keyboard
[ 3.863] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input15/event13"
[ 3.863] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 3.863] (**) Option "xkb_rules" "evdev"
[ 3.863] (**) Option "xkb_model" "pc104"
[ 3.863] (**) Option "xkb_layout" "se"
[ 3.863] removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-VGA-1 (null)
[ 3.863] (II) config/udev: removing device Video Bus
[ 3.870] (II) evdev: Video Bus: Close
[ 3.870] (II) UnloadModule: "evdev"
[ 3.870] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 3.870] (**) Video Bus: Applying InputClass "system-keyboard"
[ 3.870] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3.870] (II) Using input driver 'evdev' for 'Video Bus'
[ 3.870] (**) Video Bus: always reports core events
[ 3.870] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 3.870] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 3.870] (--) evdev: Video Bus: Found keys
[ 3.870] (II) evdev: Video Bus: Configuring as keyboard
[ 3.870] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input16/event14"
[ 3.870] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 3.870] (**) Option "xkb_rules" "evdev"
[ 3.870] (**) Option "xkb_model" "pc104"
[ 3.870] (**) Option "xkb_layout" "se"
[ 4.540] (II) intel(0): EDID vendor "LEN", prod id 16562
[ 4.540] (II) intel(0): Printing DDC gathered Modelines:
[ 4.540] (II) intel(0): Modeline "1920x1080"x0.0 139.00 1920 1980 2028 2050 1080 1090 1100 1130 -hsync -vsync (67.8 kHz eP)
[ 4.540] (II) intel(0): Modeline "1920x1080"x0.0 115.83 1920 1980 2028 2050 1080 1090 1100 1130 -hsync -vsync (56.5 kHz e)
[ 7.358] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event15)
[ 7.358] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 7.358] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
[ 7.358] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 7.358] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event15"
[ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
[ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
[ 7.358] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 7.358] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
[ 7.358] (**) Option "Emulate3Buttons" "false"
[ 7.358] (**) Option "EmulateWheel" "true"
[ 7.358] (**) Option "EmulateWheelButton" "2"
[ 7.358] (**) Option "YAxisMapping" "4 5"
[ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 7.358] (**) Option "XAxisMapping" "6 7"
[ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
[ 7.358] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 7.358] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input14/event15"
[ 7.358] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 14)
[ 7.358] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 7.359] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 7.359] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 7.359] (II) No input driver specified, ignoring this device.
[ 7.359] (II) This device may have been added with another device file.
[ 20245.335] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 21030.923] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 21196.939] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 21209.255] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 24416.533] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 26177.657] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none

How to Create a DVD from a .mov File?

I have a .mov file of a concert and I want to make a DVD out of it. Ideally, I'd like to have full menu options just like a normal DVD. From the main menu, I'd like to have two choices: 1) being able to watch the full length concert, and 2) being able to select individual songs (much like a scene selection on a regular DVD). The .mov file is in really great quality (the concert was filmed in HD) so I'd also like to keep as much quality as possible. How can I separate my .mov file into separate chapters so I can place each individual song into the menu choices? Thanks for any help!

NOt sure what you mean by "first play." I've done the tutorials on iDVD, but still can't figure it out. Is it possible to delete a movie that in the right box, i.e., previously selected? For some reason it says i've exceeded the size of the DVD even though it's only 1.8 GB. So i want to delete it and compress what i have, but i can't get rid of what's there. I suppose i could just delete the whole iDVD file and start again, or change the file name of the movie on the HD, but that seems very unMac-like.
There's nothing in the iDVD help either on "project validation" errors or how to correct other errors. But right now a simple way to delete a movie would be helpful.
Thanks

Quick time 'this is not a movie file' error message

PLEASE HELP!
i've recently downloaded some movies off the internet (.avi files) and although all have originally opened and played in quicktime, i am now getting 'this is not a movie file' error messages for all of them. I've had this before and restarting the computer has usually helped - but not this time. I've also tried reinstalling quicktime, as well as installing divx (i get an error message saying this file cannot be opened). for some reason i can't install VLC (some message about not being able to mount).
I've also burnt the files to a cd and tried playing from there (Rather than my external hard drive) but still won't work. The files won't even open up a preview... i really don't understand what could have happened though - i've opened and played all of them when i first downloaded them and they worked just fine!
i'd appreciate any help.
cheers

The fact that you cannot even mount one file or install another makes it sound more like an OS problem than a QT problem, though I guess in part some people deserve what they get with pirated movies through torrents. Have you repaired permissions?
The files you cannot even use that are not the videos in question indicate your problems lie elsewhere.

Error 2048 not a movie file

QT 7 pro was working fine at first.Now when I try to play a video file I get "error 2048 not a movie file. The file plays fine in another player. Also QT will play a QT movie but not a file. I have QT installed on two computers with the exact same problem on both. please help.

Yes the format of the files is windows media video files. They play successfully on real player and on VLC media player.
They were also playing on itunes,but now they won't play on QT or itunes. By play a movie I mean the movie was downloaded as a QT movie. The desktop icon says QTmovie. The files That give the 2048 error have real player on the desktop icon.I have uninstalled and reinstalled, even disabling norton before reinstalling still error 2048 on QT. P.S. Itunes and QT were downloaded as a bundle, whatever the problem is is affecting itunes because now when i add files to library they don't show up.

After recent QuickTime updates fcp and QuickTime will not open .mov files captured on my FS-H200. Iran

After recent QuickTime updates fcp and QuickTime will not open .mov files captured on my FS-H200. I put this onthe quick time thread and they sent me here.

and NEVER do a software update unless you've got a clone of your startup drive so you can restore your system to it's working state if something goes wrong.
https://discussions.apple.com/docs/DOC-2494

Can't open MPEG that opened before: "The file is not a movie file."

I have an unusually large (for me) MPEG file that I succeeded in downloading and viewing sometime in the last year and a half, and I kept it on my disk despite its being over 3GB because I thought I might want to look at it again. Now I do, only it won't open: "The movie could not be opened. The file is not a movie file." I tried using Time Machine to bring back earlier versions of QuickTime - 7.5 and 7.5.5 as I recall; I now have 7.6.2 - but these wouldn't open the file either, so I figure it may have something to do with a change in the system. In any event, should it be possible to open this file (again, it did open previously, with no problem), and if so how? Thanks.

I have a similar major problem and wonder if it its to do with file sizes or codecs. I recorded video at work from a laparoscopic medical camera and output the video at the end of the session from the device's hard-drive to my 16GB memory stick. It is a 750Mb with file extension .mp4 and I now get exactly the same message as others if try to open it with Quick time (I can't open it with anything else either and nor could our medical illustration department). I bought the quick time pro upgrade as was told that would probably work and got same problem. Interestingly, I have had a second problem today having worked on a separate movie I put together in i-movie that I had recorded from a hi-def panasonic camcorder, imported and successfully edited (with ease) in i-movie and exported it "uncompressed" as a quicktime movie. It was only 5mins of video and produced a 15GB file. I wanted to save this onto a 16GB memory stick, but found out that the FAT32 folder system doesn't allow that file size! So, I formatted the memory stick to "Mac extended journalled", and was able to save the entire file onto the stick. But, now it won't open in quick time! I get the same message as above! Does anybody have any idea what these two issues might be?

"The file is not a movie file."

Hey Everyone,
I have a series of .avi files that, up until recently, I was able to watch using QuickTime and on my television through my EyeHome box...
Due to a hard drive failure, I had to copy these files to another hard drive. Now when I double-click on one, I get a message from QuickTime stating "The movie could not be opened. The file is not a movie file."
Meanwhile, though, I can still play these same files using VLC Media Player. So what gives? Why would files that were previously playable with QuickTime suddenly stop working?
Yes - I've got all the latest software updates, etc.
Any ideas?
Thanks!

I, too am having similar problems. I had upgraded to QT 7.4 and my FCP 4.5 would no longer launch. I Archived and Reinstalled my osx 10.3.9. Now, all my MPEG-1 files that were previously useable in QT give me the "The movie could not be opened" message. The video is viewable in VLC, however.
I do have QT Pro 7. I cannot use MPEG Streamclip. When I try to open with MPEG Streamclip, I do not get any video.
I have purchased the Apple QT 6 MPEG-2 PLAYBACK, but that didn't help. I don't know if there is a playback component I had before that I don't have since the Reinstall.
Any help would be appreciated.
Jim

Mocha not opening movie files

My After Effects Adobe CS6 student version 5K retina display Mac is not working and the mocha is not opening movie files I have in my computer. How do I resolve this? Please send me instructions via my e-mail:- [email protected]

I doubt that's going to happen. The whole idea of a forum is so OTHER people can read your problem and share in the solution.
Besides, we have no clue what's wrong!
FAQ: What information should I provide when asking a question on this forum?

Premiere pro will not import .mov files

Premiere pro CS3 running on Vista 64 bit will not import .mov files. After Effects CS4 has the same problem, it says I don't have the correct version of Quick Time installed. I'm using the 64 bit version 7.6.4 for Vista. Any help would be appreciated.

Welcome to the forum.
Now, what is inside that .MOV "wrapper?" This ARTICLE will give you some background on "wrappers." It is mainly written with .AVI in mind, but translates to most AV file formats, including .MOV.
Now, I use a lot of .MOV files and these are all done in the Animation CODEC. Never an issue for me.
One thing that might aid you is the US$30 upgrade/unlock key to QT Player Pro. It can Export as a bunch of useful formats/CODEC's. Depending on whether your footage is SD, or HD, you can Export most to formats that play perfectly with PrPro.
Good luck,
Hunt

Quick Time Pro - The movie could not be open. This is not a movie file.

I upgraded to 7.4.5 and now I can't view any of my AVI files. I am getting the following error message.
The movie could not be open. This is not a movie file. Please help!

It is most likley a problem in the new Quick Time (QT). My Updater downloaded the new QT 7.4.5 two Saturdays ago. I have been making movies in iMovie then posting them to YouTube. In the beginning I uploaded the movies as MOVs but soon discovered AVI files (larger file and added time to upload) had more clarity when viewed on YouTube. Once the new QT 7.4.5 downloaded all my AVIs had picture, but no sound! I downloaded the Perian component as posted in QT discussions. The sound returned to the AVI files. However, when I Exported an AVI movie from iMovie the picture quality was worse than MOV. There is something wrong with the new QT 7.4.5 when working with AVI, my AVI movies look terrible. These AVI files were all downloaded from my Ultra Flip Video camera with Flip’s codec 3vix. Flip is aware of this problem and acknowledged it last week, I sure hope Apple is also aware.

Quicktime: The movie could not be opened. The file is not a movie file.

Hi, im sorry to say im a bit challenged when it comes to this so i hope you can help!...
Im trying to import the movies from my Sony video recorder (handycam DCR-SR32) and when i open the folder for it on the desktop and try to open one of the files it says: quicktime: The movie could not be opened. The file is not a movie file. All the files have quicktime icons next to them and i definitely have quicktime installed. I managed to import movie filed before into imovie and im trying again to do so... any clues as to what im doing wrong or how i can get the files into imovie to play and edit?? many thanks in advance

To Apple Discussions!
What type of files are they - .avi, .mp4, .mov, etc.?
Make sure you have the following installed:
Flip4Mac
VLC Media Player
Perian

Rendered movies won't play "...is not a movie file"

Hi -
The files I rendered can't be opened in Quicktime because "it is not a movie file". I rendered an MPEG4, H264 and Quicktime with No compression. None of them would play.
What causes this?
How can I fix it?
TIA your input -
jl
OS X(10.5.11), AE CS3.

Todd -
AAARGH! I've reported on the wrong version. I'm not using CS3 - it's CS4 (0.0.2). My big apologies.
Thanks for the response.
I tested QT with similar files that were made with AE7. There is no issue at all.
There's something with these files that were make with AE CS4.
I was just wondering if anyone else had similar issues crop up.
Thanks
jl

Mov-av error message. This is not a movie file.

Hello,
In capturing a live HD file from my AJA IOHD in PRO RES 422 the computer froze at the end of the capture and forced me to use Force Quit to close out of Final Cut 6. The file is 112 gig and all the information is there on my disk. But, when I try to open the quicktime file I get the dreaded "not a movie file" error message because it has the .mov-av extenson.
I imagine the header was corrupted and the directory needs to be rebuilt to get access to the file. Does anyone know how to do this? I would like to be able to open it without going to a very expensive data recovery service.
Any help would be greatly appreciated.
Thanks.
David Perry
Carmen Productions
Leesburg, VA

Hello,
Use free application Treasured to do a diagnostic and preview your damaged files.
http://aeroquartet.com/movierepair/download.html
Then follow the steps proposed by Treasured to request a repair.
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'
Regards, BJ

External dvd, not detecting .mov files

Similar Messages

Maybe you are looking for