External Hard Drive is not connecting or loading to my laptop?

Why is it when i connect my Western Digital External Hard Drive to my laptop it does not connect or is seen on my laptop?

I have crazy solution to format it to FAT 32, it work a couple times on my several MAxtor, and Western Digital HD. But this is the last resort and if you are not handy and familiar, don't do it.
It happen on my external HD, so I crack the enclosure open, pulled the HD out and attached it as internal HD on a PC after adjusting the jumper to master and make sure no other HD attached to the motherboard. Make sure the motherboard detected (you can see it from bios menu).
Insert a bootable installer disk before XP ('98, ME, or 2000), and start from there until a promt comes, and type fdisk and you delete the old partition and create a new partition and restart once using the disk still and format it using FAT 32.
After that you put it back to the enclosure, and mount it to MacBook as a new HD with default factory format.
If you don't have the installer disk, this might help :
http://www.bootdisk.com/
But if your maxtor still under warranty better talk to them first and they might willing to reformat it for you.
Hope this help your external back and let you use it on your MacBook.

Similar Messages

  • LaCie 1TB external hard drive can not connect to E4200

    I have my LaCie 1TB external hard drive plugged into the USB-port of the Linksys E4200 so I can access that drive wireless.
    However, in my disk management (via Cisco Connect), it does not show under Storage > Disk.
    How can I solve this so I can access this hard drive from any computer in the network?
    The drive is formatted in NTFS.
    Thanks

    Connect the hard drive directly to the computer and make sure that your computer can detect the hard drive.
    If it is detected and working properly on your computer then connect the hard drive the USB port on the router.
    Follow this link to setup storage device connected to E3000 router.

  • ITunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

    I have my iTunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible

    You can't connect directly to the external drive, but should be able to use iTunes Home Sharing via the laptop.
    http://support.apple.com/kb/PH1453

  • HT1151 I have my iTunes library on an external hard drive that was connected to a PC, now I want to connect to my new iMac and load the iTunes library onto that computer, can I do that?

    I have my iTunes library on an external hard drive that was connected to a PC, now I would like to connect that hard drive my new iMac and load the iTunes library onto that computer, can I do that?  Looking for a solution that keeps me from re-ripping my CD collection.

    Here are the official Apple Support instructions:
    http://support.apple.com/kb/HT4527
    Ciao.

  • My external hard drive is not working on my mac.

    I have tried all options available such as going on finder and making my hard drives visible and disk utilities

    Basically my external hard drive would not eject so i force quit it and the hard drive does not come up at all anywhere on my mac pro OS X version 10.9.4 and it isn't visible in disk utilities no and it doesn't say format either and i have tried it on a windows computer it does not show on their either. the format is Fatdos i think so i can use it on windows and mac and i cant see anything in system reports and yes it is connect by a USB. also it isn't making any noises either

  • External Hard Drive does not show up in Finder

    My external hard drive is not showing up in Finder.
    It shows up in Disc Utility, but I do not have access to it. I have tried the following:
    command-shift c, nothing happens
    confirmed in Preferences/General that external hard drive was checked
    tried another cable
    tried another port on the back of the external drive
    tried to connect through the USB port
    re-started, etc.

    zone-5 wrote:
    I have same problem after installing OS 10.5.8. Disk utility sees the hard drive, the computer does not. Disk utility says invalid node structure. Volume check failed. Filesystem verify or repair failed.
    That means the directory is corrupt. If you have a heavy-duty 3rd-party disk repair app, such as +Disk Warrior,+ it may be able to fix it. Otherwise, your only option is to erase and reformat the disk. They're not cheap -- Disk Warrior is about $100. And for Leopard, you need version 4.1.1 or 4.2.
    I have not been able to figure out how to start a new topic here, but did find this discussion, which fits me fairly close.
    Just above the list of topics, on the left, is a +Post New Topic+ option.

  • External hard drive is not working on airport time capsule even after 7.7.2 firmware update.

    External hard drive is not working on airport time capsule even after 7.7.2 firmware update.
    I have the latest Airpor Time capsule 2gb. I specifically bought it so that I could have an external hardrive set up to wirelessly house my itunes library and movies. When i connect the drive, all i get is that the disk needs to be repaired.
    the drive can works fine when connected to the macbook pro and I have run the verify and repair features in disk utility. I have also reset the airport timecapsule as well following these changes and still no change.
    The 7.7.2 update says that it addressed the usb issue of not showing the drives but there are still problems as I cannot get it to appear.
    Please help.
    Thanks

    How is the hard drive formatted?
    Have you tried using a powered USB hub with the drive when it is connected to the Time Capsule?
    (The USB port on the Time Capsule is borderline as far as power is concerned....you may need to use a powered hub.....even if the hard drive has its own power supply)
    If the drive is formatted correctly....and....it has ample power, it will "show up" when you open AirPort Utility, click Edit, then click the Disks tab at the top of the next window.
    In the example below, my Time Capsule drive is named "Backups" and another drive named "WD Drive" is connected to the USB port on the Time Capsule.
    You should see the name of your Time Capsule drive (named "Data" unless you have changed the name) and the name of the USB drive if you perform the same check.
    What do you see?

  • External Hard Drive is not responding

    I started to notice this in the last couple days that my external hard drive is not responding to my imac. I could browse the hard drive, but I would not be able to open any file. And, any application that tries to open file from the drive would fail or would result in "no response".
    The only way I could fix the problem is by unplugging the drive completely and then re-connecting it back.
    My external HD is a 1TB western digital.
    Is this the sign of my external HD failing?
    Thanks!

    How full is the hard drive?
    Have you used Disk Utility to try and repair the hard drive?

  • External hard drive is not showing up when attached by USB

    My WD External Hard drive is not showing up on my iMac when i connect it by USB

    Hi, does that mean it shows up some other way of connecting it?
    Is it Bus powered or does it have AC power?

  • My external hard drive does not show up on my desktop

    My external hard drive does not show up on my dest top but, does shows in my Windows (vmware fusion) end although I can't see it ob my desktop but, I can eject it properly like any external drive. I have connected it to my windows and ejected properly (per the suggestion of someone on this forum) but, it still doesn't show on my Mac. I see the blue light and hear it running though. I have looked for it in disk utility but, still can find it. I have changed the cable and it still did not show on my Mac. I connected another external drive  and that showed up on my desktop.Any help????

    if it is NTFS then you need Paragon Software NTFS for Mac.
    NTFS volumes are suppose to be read only but in practice external drives don't always mount or work.
    If it is not NTFS then you need more details. Need more anyway.
    PS: this is not a MacBook area, it is Mac 65lbs tower related forum.

  • My external hard drive does not show when I am trying to open a document in Office Org??

    My external hard drive does not show when I am trying to open a document in Office Org?? When looking in the about IMAC system support it shows as being connected. Any ideas??

    Does the drive show up under 'Devices' in Finder?

  • After upgrading to osx 10.9.3, my external hard drive was not able to mount, but it can be mounted without issue in osx 10.6, how do I solve it? it was formatted by disk utility.

    Hi
    After upgrading to osx 10.9.3, my external hard drive was not able to mount, but it can be mounted without issue in osx 10.6, how do I solve it? it was formatted by disk utility.
    Thanks
    PT

    From the menu bar, select
     ▹ System Preferences ▹ Energy Saver ▹ Power Adapter  
    and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
    If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
    Check that the data cable is securely inserted at both ends.
    Try a different cable.
    If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
    If you're connecting it directly, try a different port.
    Disconnect all other devices on the bus, or as many as possible.
    Test the drive with another Mac. Test another drive with this Mac.
    If the drive is bus-powered, but has an AC adapter, connect the adapter.
    Start up in Recovery mode and launch Disk Utility. Is the drive recognized?
    Start up in Safe Mode and test.
    Reset the NVRAM.
    Reset the System Management Controller.
    If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

  • External Hard Drive does not work with Lion

    Hi
    My External Hard Drive does not work with Lion this message appears:
    NTFS-3G could not mount /dev/disk1s1
    at /Volumes/My Passport because the following problem occurred:
    /Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
    the MacFUSE file system is not available (71)
    can anyone help?

    Hi,
    See this Discussion:
    https://discussions.apple.com/thread/3191198?start=0&tstart=0
    Cheers,

  • My WD 2tb external hard drive will not unmount from my MacBook Pro.

    My WD 2tb external hard drive will not unmount from my MacBook Pro. It no longer even shows up in finder, however it does show up in Disk Utility. I have tired so many of the suggestions on the internet all to a fail.
    I keep getting the message to be sure that all applications are closed before ejecting the drive. I have no clue how to tell which appliactions are using the external drive to shut them off. I turned off Time Machiene to be safe. 
    I don't need anything on the external drive, I am just trying to erase it, save my current info, and migrate it to my new MacBook Pro.
    I have been about four days now with this issue all over the internet, in this community, and watching videos on everything and nothing about this topic to a fail.
    I think I am doomed and have lossed this external drive because of some wierd application that will NEVER close on my hard drive for it to disconnect correctly. It's annoying.
    Does anyone have a solution?

    Have you trie using another USB port? Can you test the USB ports with other USB devices to assure they are working? You may want to reinstall OS X in case there has been a driver glitch.
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • I recently updated my Mid 2007 iMac with the latest OS 10.8.5 now my external hard drives will not show up. They show up when I boot them up on a machine running and earlier OS. Is there a fix for this?

    I recently updated my 20-inch, Mid 2007 iMac with the latest OS 10.8.5 now my external hard drives will not show up. They show up when I boot them up on a machine running and earlier OS. Is there a fix for this?

    Can you see them in Disk Utility?
    If so, can you select and Mount them?
    If not, disconnect them, reset the iMac's SMC and then reconnect them.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    If you still can not see them, connect them back up to the iMac running the older OS, open Disk Utility and look to see how they are partitioned and formatted.

Maybe you are looking for