External hard drive not working with Time Machine

I have an Iomega network hard drive attached via ethernet cable to my Airport Extreme router.
I plugged the hard drive in. Everything works like it should. I can see the drive in Finder and I can read and write to the drive. I do share the network drive in a mixed WIN and OS X environment. I never had to reformat the drive and I can read/write to the drive with no problems from all of my computers.
I turned on Time Machine on my iMac and walked through the simple setup screens there. I never set anything up on the hard drive through the drive interface software. And Time Machine worked fine for about 4 months. Then all of a sudden, Time Machine just stopped backing up and I got all kinds of error messages saying that the TIme Machine backup failed.
So I went into Time Machine, turned it off, turned it back on. No luck. Same error messages.
So I started fresh. I deleted the prior Time Machine backups and I am back at the TIme Machine set up screen. OS X can see the TIme Machine share on my external hard drive and I tell the setup wizard that's the drive I want to use.
Then I get a window that says it's trying to connect to the external hard drive which I call "Cloud_Drive". After about 30 seconds, I get an error window that says
"There was a problem connecting to the server "Cloud_Drive-TimeMachine"
The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
At this point the external drive is still visible in FInder and I can read/write to it from my iMac. I just cannot understand why Time Machine was working and then all of a sudden it stopped.
I did go into the software management of the drive and found an area in which to turn Time Machine on on the drive's side. Which I never did before so I turned it on and then I'm prompted to enter the name of the computer and the ethernet ID. I entered the name of the iMac and I have tried using the WiFI MAC address - no luck getting TIme Machine to work and I've also entered Terminal, found a MAC address under the line titled "ether" and still the same result.
I have also changed the destination of the Time Machine files on the external hard drive and the Time Machine wizard does write a sparcebundle file to that new location but still get the same error message above.

Is it a firewire ext. HD?
Yes, many are reporting same, there is a firewire fault and TB HD on external HD from LaCie (Seagate) and from WD especially.
Technicians are looking into it.
Until there is resolution, consider setting up a USB ext. Time machine HD.
Until then consider confining Mavericks use with USB HD.
Ive tested a long line of USB HD on Mavericks, all seem fine.

Similar Messages

  • Choosing an external hard drive to work with Time Machine

    Now that I have decided to get an external hard drive for my iMac, I am a little frustrated by all the different options out there. All the different ratings and reviews are making me dizzy! I am looking for an external drive that works well with iMac and Time Machine, preferably plug and play. I am looking for 1TB or so of storage and basically will use for Time machine back ups and saving pictures/video. Is there a drive that has a good reputation of getting along well with macs? Any suggestions?

    Cumby wrote:
    1TB or so of storage and basically will use for Time machine back ups and saving pictures/video.
    If you mean you're going to put the originals of some media files and your TM backups on the same physical disk, that's not a good idea. When it fails (and it will fail, eventually), you risk losing both the originals and the backups.
    You can, of course, keep other data on the same disk, but you should partition it so TM has it's own, exclusive space, usually about 2-3 times the size of what it's backing-up. See items #3 and 5 Frequently Asked Questions post at the top of this forum.
    If you decide to do that, then find some other way to back-up your media files, such as CDs/DVDs.
    Is there a drive that has a good reputation of getting along well with macs? Any suggestions?
    For your TM disk, most of the name brands are about as good as the others; one maker may have a run of problems on a particular model, but by the time that becomes known, it's likely out of production anyway.
    Please update your profile so we know what sort of Mac you have, and what version of Leopard you're running.
    You probably want to get a FireWire drive, as they're usually faster and more dependable than USB. If you have a F/W800 port, spend the extra money for a F/W 800 drive; it's much faster than F/W 400.
    If you think you might ever want to put a bootable "clone" on that drive (many of us do, in addition to Time Machine), and you're considering a Western Digital drive, be sure it's bootable -- some of theirs aren't.
    And get one with it's own power supply; taking power from your Mac may not always be dependable.

  • Thunderbolt 2 external hard drive not working with Macbook Pro (early 2011)

    Hi,
    I'm new to this forum and I hope you guys can help me with this:
    I've recently bought an external hard drive that works on Thunderbolt 2 (LaCie d2 3TB). When I connect the new drive to my Macbook Pro through the thunderbolt port, the drive isn't recognized. However, the drive works fine through a USB connection.
    I thought that Thunderbolt and Thunderbolt 2 are compatible, however this doesn't seem to be the case. Maybe it's because the OS X / driver / firmware version that I'm working on that is not updated? I work on an early 2011 Macbook Pro: OS X Version 10.6.8 (Snow Leopard).
    Thank you very much for your help!
    Daniel

    Hi danielsh6,
    I recently bought the new Lacie Thunderbolt 2 D2 3TB and I had the same problem as you, i have a macbook pro early 2011, those support thunderbolt but many times there is a bug that doesn't let you connect any thunderbolt drives to your computer. The solution I found was installing this update:
    Thunderbolt Firmware Update v1.0
    Before doing this I would recommend you updating to mountain lion (not yosemite yet as there is still some glitches and more on preview's macbook pro's).
    Hope this helped!
    Forest

  • Macbook won't recognize external Hard Drive and issues with Time Machine

    Hello everyone,
    I have just bought a new Macbook Pro with Mountain Lion and I am currently having problems with Time Machine.
    The issue begun in Snow Leopard: Time Machine was taking too long to backup, and would often not finish the backup because the external hard drive would be unwillingly ejected.
    Now with Mountain Lion I have reformated the drive (Mac OS Journaled) and about a third of the way through had the same issue: the drive was ejected before the backup could be finished. I restarted the machine and it happened again. However, now the computer won't even recognize the external drive when I plug it in. I have also tried to power off/on the drive itself to no progress.
    I have tested the USB port with another drive and the port is fine. I have also tested the usb cable and it is fine. And Disk Utility does not recognize the drive (even when I try the >diskutil list command in terminal).
    Now, I can hear the drive humming normally when I turn it on, and it is not usb-powered (my electricity current does fluctuate).
    Could the interrupted backup procedures have damaged the drive? And if so, wouldn't the computer recognize it anyway?
    It is a 4 year old WD 1 TB that is used exclusively for TM and has never left the house.
    Thank you for your time reading this and let me know if you need any more information that could help out.
    Cheers!

    From your description, I'd suspect a failing drive. Maybe time for a new external, especially as you've already re-formatted and it's still playing up.
    I had a similar problem with one of my clone backups a few weeks ago - it failed, I erased it, re-cloned, worked a couple of times and then it failed again. Disk Utility didn't throw up any errors after re-formatting. I guess all disks die at some point.

  • Which format for external hard drive to use with time machine backup and connect to windows laptop?

    Hi!  I have an external hard drive on which I have transferred my iTunes library (just mine - not others).  I have also a folder containing just films (some but not all of which are in iTunes too)  Everything has been working just fine until yesterday I noticed that Time Machine was not including the external hard drive in back up as it wasn't formatted.  So I have moved everything back to the Mac hard drive and and ready to format the external hard drive - but understand that if I do the contents cannot be opened from a windows laptop ...  is that right?  Is there are format I could choose that would allow Time Machine to back up and allow Windows to open as well (the idea being that I take the external hard drive with me on holidays etc!!)  Many thanks for any advice. 

    ok - I understand.  I have managed so far to format the drive (on windows) to exFAT file system - which apparently works with both Windows and Mac - but you're  correct - it will not be included in time machine backup as I have checked the back up files and Samsung is not showing.  Reckon I'm onto having to buy yet another portable hard drive just for windows - or of course buy myself a new mac book!!  Can I ask you please - does the drive have to be clear of everything before I change the format - or can I change it with the files still in there?  Also, got any quick ways duplicating the files onto another External Hard drive (for use on the windows laptop)  At the moment the files are taking 2/3 hours + to copy over!  Thank you! 

  • What brand external hard drive is best with time machine

    what brand of external hard drive works best with time machine?

    Contrary to the other two replies, I will relate what I've read here: WD drives are fine, but their (cheap?) enclosures are subject to failure. Some buy a bare WD drive and install it in an Oxford Chip external enclosure (OWC / macsales.com would be one source). And, I have two LaCie Quadras and one OWC Mercury Pro - both are generally recommended here. If you want it bootable, most WD drives do not support it:
    http://wdc.custhelp.com/app/answers/detail/a_id/1787/related/1/session/L2F2LzEvd GltZS8xMzUxNTIzMzIwL3NpZC9ueUFYc1g5bA%3D%3D
    Please note: it's good to have an external hard drive which has its own power supply and, as mentioned, FW 800 or USB 3). You also do not need any software that comes on the external - you will most likely need to format it anyway because most come formatted for Windows, but that is easy using Disk Utility.

  • Iomega eGo 2TB USB/Firewire 800 drive not working with Time Machine.

    The drive I had for Time Machine died and I replaced it with an iomega eGo 2 TB USB/Firewire 800 drive. Time Machine finds it and backs up the disk when I first boot up but then it seems like the drive goes off line. At that point, when Time Machine tires to back up it can't get the drive to respond and my system hangs. To fix that, I turn off the iomega that fixes the hang up and I get the disconnect without ejecting warning.
    I ran disk utility and disk warrior. Both apps reported the disk is fine.
    Can any tell me what's up? I'm running OS X 10.7.2
    Thanks.

    I am having this exact same error with my new iMac 21.5" connected to a brand new Iomega eGo 2 TB Desktop Firewire 800 External Hard Drive (Mac Edition - 34796).
    The TimeMachine backup works fine, but as soon as the iMac goes to sleep and wakes back up, TimeMachine doesn't respond well to any commands and all sorts of errors appear on the screen.
    I will try the tip here from Kappy and report back later if this works for me.
    Kappy, one thing to note is that I'm using the Firewire connection from the iMac to the eGo and experiencing this problem.  The eGo has its own power supply too.

  • External hard drive not recognized after time machine locked up

    I was backing up to an external hard drive (300GB Western Digital) and time machine locked up. I had to shut down the computer and restart. Now the external hard drive does not show up on the desktop?
    I can see it in disk utility but I am not able to mount or unmount the disk, I keep getting an error that the disk is in use. I tried to erase/reformat the disk and no luck.
    Any suggestions?
    Thanks for the help

    KTM450rider wrote:
    Do I need to boot from the install DVD?
    this is often the easiest and eliminates any "busy drive" problems. what's wrong with booting from the install DVD? takes a couple of minutes.
    My main hard drive is OK... the drive that I am having problems with is an external hard drive that I was using to back up my lap top. I just want to get the external drive reformatted, but disk utility will not erase it. I get an error that disk utility shut down, "please check the drive and make sure that the drive is not in use or programs are still running"
    Is their a way to do a hard or forced reformatting of an external hard drive, I don't care about the information on the drive
    I also tried disk warrior to recover the info on the disk and all it does is crash my mac pro????
    Thanks again for the help

  • External hard drive to use with Time Machine? Thoughts?  Mac newbie.

    Hello. Switched to an imac and have loved the experience. Was just about to buy an external hard drive when apple announced the time capsule. I've been holding off thinking I would purchase one but now I'm re-thinking it.
    Between music, videos and pictures, I currently have about 400gb of stuff (and it will grow). My main concern is backing up (archiving) a copy of these files. Backing up other system files is a second concern after that.
    I'm thinking of buying a 1TB external hard drive, firewire capable, partitioning part of it to be an archive drive, and the other part to use with time machine. Skip the time capsule.
    Will that work? Other recommendations?
    If so, any recommendations on a quiet, reasonably sized (i.e. doesn't take up the entire corner of the desk), 1tb external hard drive?
    Thanks.

    Clayton, if you're only backing up one Mac, then you can purchase any good, reputable 750 GB or 1 TB external drive.
    Considerations:
    1) Reliability is key here. You want a drive that works. Various people have complained about Western Digital (me included), so take that into consideration.
    2) Quiet is important. You have a quiet computer -- why louse up the working environment with a noisy drive?
    3) FW (Firewire) 800 is faster than FW400, which is faster than USB. But once you get the initial backup done, it really doesn't matter how fast the drive is, because it works in the background and doesn't hamper your work. And if you DO need to restore your entire computer via Time Machine (I've done it), speed is less important than reliability. Even if it takes 3 hours, you'll be grateful. So while some may counsel you to get a 'fast' drive, reliability is more important.
    4) On FW versus USB, you'll hear many claims. Again the key is reliability versus speed. A good USB drive is fine for what you are doing; FW is faster. Some folks have had problems with one or the other, so hear what they have to say.
    5) Every drive dies. That's true for any electromechanical device. Don't think you've solved your backup problems by plugging in a drive and walking away. Your most critical files need a second backup, be it to a DVD, CD, thumb drive, network drive -- something. The more critical it is, the more backups you need. If you're writing your Ph.D. thesis, by definition you can't have too many backups
    6) Convenience matters. You can 'roll your own' drive if you have experience -- buy a case, buy a drive, assemble, etc. But it's many times easier, particularly for a Time Machine backup drive, to just buy a reliable (there's that word again) external HD off the shelf.
    7) Finally, follow directions. Apple tells you how to set up a TM drive. Do it their way. That means, format the brand new drive and make it a 'GUID' partition. Use the Apple Disk Utility. Follow directions.
    Good luck,
    Steve

  • WD External Hard drive not working with new Macbook Pro

    I have recently upgraded to a new Macbook Pro and when connecting a WD 1 TB Passport external hard drive, it doesn't appear on the MBP, but when I connect it to my old Macbook running 10.5.8, it appears normally. Is this a problem with formatting or an issue because it is USB 2.0...
    Any help appreciated as I have a lot of data on the hard drive and would like to be able to use it with my new MBP.

    I'm on Lion, with similar issues with two WD external HD. But what I found fixed the problem was to:
    1. go to the manufacturer's website (in this case Western Digital),
    2. locate my external HD, download the download.
    For instance, I downloaded the WD Drive Utilities for Mac (for My Passport for Mac USB 3.0):
    http://support.wdc.com/product/download.asp?groupid=219&sid=157&lang=en
    Install the downloaded app.
    3. Plug in external (this part, I think is important) directly into your tower or laptop (as opposed to through a USB multi-plug extender). Possibly this is because you access more power?
    [I'm trying to remember in which order everything happened. But I think at this point the external hard drive mounted]
    4. Install the software that is found on the external HD (in my case, it was a brand new device, so that had never been installed).
    5. Run "WD Drive Utilities" and run diagnostics.
    6. Test to see if it holds. Unmount the External HD. Unplug. Replug in and see if it mounts.
    Note: I have not yet tested to see if plugging in the external somewhere other than directly into the tower also works. But I think the main problem is getting it to mount the first time and installing the software. That's what I think.

  • Quiet external hard drive for use with Time Machine?

    Few questions related to Time Machine:
    1- what external hard drive that would be good to use with Time Machine, that also runs relatively quietly? Since TM runs 24/7, am looking for one that is quieter than my current G-tech.
    2- Please confirm what size is optimal relative to the size of the internal hard drive.
    3- I currently use a separate external hard drive as my bootable disc.  Is it possible/preferable to have these be on one and the same drive?
    Thank you.

    1. I like these (have three of them) - literally whisper quiet:
    http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
    2. You should allow 2 - 3 times your internal drive's size for TM.
    3. No, it'd be best to be on another drive - you can create separate partitions, but if/when the drive fails, both of your backups would be gone. So, keep your clone on a separate disk. In fact, it's good to have two different backups.

  • Hitachi X500 external hard drive not working with MacBook Pro

    I purchased a new Hitachi X500 500GB external USB hard drive today and when I plug it into my MacBook Pro the drive makes a clicking noise and never mounts. When I try it on my wives MacBook it boots up fine. I bought one early in the day and the same thing happened, so I returned it and got a new one and the same thing happens. Any thoughts?
    Looks like it's formatted with Fat32 when I look at it on the MacBook.
    Thanks

    Welcome to Apple Discussions!
    Does the external drive have it's own power brick? If not, it's bus-powered and may not be getting enough juice to run.
    Also try all the USB ports on your MBP. Although they are "supposed" to be producing the same amount of power, posts around here suggest that's not always the case.
    If the drive does not have a power brick, you can get an inexpensive powered USB hub (it has a power brick) like this one:
    http://eshop.macsales.com/item/Belkin/F5U403P/
    Adding a powered hub fixes problems with bus-powered USb external drives about 95% of the time.

  • What is a good external hard drive to use with time machine running osx lion?

    My LaCie HD quit and I need to get a new one. What is recommended to use with the Lion OS? I would like to use Time Machine and hook the HD up using Firewire.

    I've been using several Mercury drives from OWC (MacSales) for years with no problems whatsoever. They are good and not expensive. Here's where you can find them. Pick one that fits your needs.
    http://eshop.macsales.com/shop/firewire/
    Rick

  • I am trying to get an Iomega hard drive to work with Time Machine

    I have replaced my old Iomega drive with a new 2TB one but unlike the old one, which worked the minute I connected it to Time Machine, this one requests a password to the Iomega server. I have registered the product with Iomega but I have no idea where or how to set up this password. I found a way to update it in the Iomega settings but it requires and 'old' password to allow you to change it. I have tried everything I can think of but it still won't work!

    Disk Utility, Partition (just one partition perhaps), make sure that GUID Partition table is chosen, then erase and format in Mac OS Extended (Journalled).
    Then probably you can assign it in TM preferences.

  • A good external hard drive to use with Time Machine?

    I am currently looking at this:
    http://www.ebay.co.uk/itm/Iomega-Prestige-320-GB-Portable-Hard-Drive-Compact-HD- /150635106484?pt=UK_Computing_HardDrives_RL&hash=item23128d50b4#ht_1674wt_1156
    But I don't really know, I want a fairly cheap one that is at least 320GB really :/

    This also looks good but would I be able to reformat it for Mac OS X?
    http://www.ebay.co.uk/itm/320GB-Seagate-External-Portable-Drive-/160623670173?pt =UK_Computing_HardDrives_RL&hash=item2565eab39d#ht_666wt_1156

Maybe you are looking for