External mail from SAP

Hi ABAPers,
My program is trying to send external mail using FM SO_NEW_DOCUMENT_ATT_SEND_API1.
I suppose there is some amount of customizing also involved in txn SCOT,in case any one has an idea about the same, please share the info across.
Thanks in advance.

Hi Tarun,
Check the following link:-
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
these link will help u to config SCOT.
And one more thing u have to do..
Go to SE11 n open Table sxnodes in change mode.
And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.\
OR problem might me 1 of these as under:-
1. In the exporting parameters of..FM use
commit_work = 'X'.
2. Check for Sy-subrc of FM..
if sy-subrc = 0.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
this report program is used to automatically send the e-mails that are pending in the job queue in SCOT or SOST.
Hope this will work For U.
Regards
Sachin Dhingra

Similar Messages

  • BASIS Configuration needed to send an external mail from SAP Program

    Can you please help me about the BASIS configuration needed to send an external mail from SAP Program?
    Regards,
    Subhasish

    Hi Subhasish,
    Please go thru the below link.
    Re: SCOT Configuration--for external mail
    Regards,
    Lakshman.

  • External Mail from SAP worflow

    We are using the standard SAP PO(BUS2012) workflow, which is activated when the PO release is to be effected.
    I am getting my mails in SAP inbox as desired. Now I want to send this same mail to an external email .  I donot want any background job to do it .. rather i want that whenever the SAP mail is generated also at the same time the external mail is also generated. Could any body help me to configure the same?
    Regards

    Hi Dipak,
    You can also use the approach in below links:
    Re: Send notification to E-Mail id
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/send%252ban%252bexternal%252bmail%252b%252bthrough%252bsap%252bbusiness%252bworkflow%252band%252brecievers%252baddress%252bin%252bcc
    Hope this helps!
    Regards,
    Saumya

  • Send External Mail from SAP

    Hi all,
    I have one ALV-report which has 64 columns.
    Now i want to send this report to external mail.
    I have already created a program for this but the problem is that my report contains 64 columns but only 30 columns is sending to external mail remaining data is not generating in excel sheet.

    first check o/p in spool t.code sp02
    o/p is having 64 columns or 30.

  • Problem sending externail mail from SAP

    I am facing problem in sending external mail from SAP. for ex: yahoo, hotmail like that. But, i can able to send the mails to my domain ids. I have configured both the SMTP and SAP internet gateway to send mails.
    But, i dont know what could be the problem in sending external mails.
    Is there any body to help me in this regard
    Regards,
    B.Sudharsan

    Hi Sudarsan,
    How are you trying to send an e-mail using ABAP or using actions or ?
    Enclosed link gives you a complete overview of the settings and the way to send an e-mail using ABAP ( if necessary).
    /people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
    Reward points if it helps.
    Regards,
    Vamsi Krishna P.

  • Sending Mail from SAP to External Source

    Hi Experts,
    We are on ECC 6.0. I have configured the standard SAP system for
    sending mails from within SAP to our company mail server. The
    mails from SAP are going successfully to our official company
    ids, But when i am trying to send mails to outside address like
    eg. " email@removed " or " email@removed ", it is not going and
    giving an error recipient unknown.
    The configuration of SAPConnect is correct because mails are
    going successfully to our company id, to send outside do i need
    to do something extra???

    It's Mail Relaying and it allows a mail server to send email (or relay it) on behalf of other systems. Many companies have relaying turned off because it is a security risk.
    For example, allowing relaying will allow your system to send an email from xxx.com though your email server which manages emails for company.com. This could be used by a rogue to send spam through your email server.
    Also, if you try to send an email from an account that your mail server does not handle some receiving servers may assume it is spam and block it.
    For this reason, only allow mail relaying on the email server for your domain and only from the SAP systems. This will prevent abuse from occuring because relaying is enabled.
    Have you set the default domain for SAPconnect:
    [http://help.sap.com/saphelp_nw04/helpdata/EN/00/7c9962df8111d3a36400a0c943858e/content.htm]
    Microsoft note on SMTP Relaying:
    [http://support.microsoft.com/kb/304897]

  • External mail to SAP

    HI,
    I have a requuirement where users can send a mail to SAP server and upon receiving the mail, a program or workflow has to execute.
    We can send mails from Sap to external mail...... how do we do this other way around.... external mail to SAP and how can we trigger the execution of a program upon receiving this mail.
    Regards,
    Tarun Bahal

    Hello Tarun,
    This can be done using Inbound Distribution
    http://help.sap.com/saphelp_nw70/helpdata/EN/6c/69c2e3418d11d1896e0000e8322d00/frameset.htm
    Check more details about Workflow on help.sap.com using Workflow you can also trigger processing of incoming documents.
    The link i gave you has Workflow information too.
    Regards,
    Siddhesh

  • Problem  while sending the mail from sap

    Hi experts,
                     I am facing some problem while sending mail from sap to external mail.
    this is th code i am using but it is not working. plz check and tell me.
    REPORT  ZMAIL_DEMO.
    data: maildata type sodocchgi1.
    data: mailtxt type table of solisti1 with header line.
    data: mailrec type table of somlrec90 with header line.
    start-of-selection.
    break-point.
    clear: maildata, mailtxt, mailrec.
    refresh: mailtxt, mailrec.
    maildata-obj_name = 'TEST'.
    maildata-obj_descr = 'Test'.
    maildata-obj_langu = sy-langu.
    mailtxt-line = 'This is a test'.
    append mailtxt.
    mailrec-receiver = 'SOME MAIL ID'.
    mailrec-rec_type = 'U'.
    append mailrec.
    call function 'SO_NEW_DOCUMENT_SEND_API1'
    exporting
    document_data = maildata
    document_type = 'RAW'
    put_in_outbox = 'X'
    tables
    object_header = mailtxt
    object_content = mailtxt
    receivers = mailrec
    exceptions
    too_many_receivers = 1
    document_not_sent = 2
    document_type_not_exist = 3
    operation_no_authorization = 4
    parameter_error = 5
    x_error = 6
    enqueue_error = 7
    others = 8.
    if sy-subrc = 0.   "( did not receive any mail) *
    write : 'mail sent'.
    endif.

    Hi,
    Please check with the following code.
    TABLES: KNA1.
    data for send function
    DATA DOC_DATA  LIKE SODOCCHGI1.
    DATA OBJECT_ID LIKE SOODK.
    DATA OBJCONT   LIKE SOLI OCCURS 10 WITH HEADER LINE.
    DATA RECEIVER  LIKE SOMLRECI1 OCCURS 1 WITH HEADER LINE.
    SELECT * FROM KNA1 WHERE ANRED LIKE 'C%'.
      WRITE:/ KNA1-KUNNR, KNA1-ANRED.
    send data internal table
      CONCATENATE KNA1-KUNNR KNA1-ANRED
                             INTO OBJCONT-LINE SEPARATED BY SPACE.
      APPEND OBJCONT.
    ENDSELECT.
    insert receiver (sap name)
      REFRESH RECEIVER.
      CLEAR RECEIVER.
      MOVE: 'any_email'_ TO RECEIVER-RECEIVER,                " SY-UNAME
            'X'      TO RECEIVER-EXPRESS,
            'U'      TO RECEIVER-REC_TYPE.
      APPEND RECEIVER.
    insert mail description
      WRITE 'Sending a mail through abap'
                     TO DOC_DATA-OBJ_DESCR.
    CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
         EXPORTING
              DOCUMENT_DATA              = DOC_DATA
         IMPORTING
              NEW_OBJECT_ID              = OBJECT_ID
         TABLES
              OBJECT_CONTENT             = OBJCONT
              RECEIVERS                  = RECEIVER
         EXCEPTIONS
              TOO_MANY_RECEIVERS         = 1
              DOCUMENT_NOT_SENT          = 2
              DOCUMENT_TYPE_NOT_EXIST    = 3
              OPERATION_NO_AUTHORIZATION = 4
              PARAMETER_ERROR            = 5
              X_ERROR                    = 6
              ENQUEUE_ERROR              = 7
              OTHERS                     = 8.

  • Send mail from SAP system to another SAP system

    Hello Xperts
    I need to send a mail from one SAP box (ECC) to another SAP box (SRM,CRM, EP etc). I know how to send mail from SAP to external address but unable to find the parameters in this case. Kindly help.
    thkx
    Prabhu
    PS: Kindly DONOT post on "How to send mail from SAP" as my questions is all abt how to send mail from one sap system to another sap system

    Hi
    To send mail Internally check this sample code it works fine this code was developed by me
    *& Report  ZMATURITYREPORT                                             *
    *&   Title - Maturity   report                                         *
    *&           ABAP/4 Consultant                                         *
    *& Name- Pavan Praveen Valluri Created on 26/07/2007                   *
    *& Module - FI                                                         *
    REPORT  ZMATURITYREPORT.
    tables: bseg.
    * SELECTION SCREEN---------------------------------------------------  *
    parameters: p_email type somlreci1-receiver default
    '@gujaratpetro.com'.
    * Data: p_email(25) type c value '[email protected]'.
    * END OF SELECTION SCREEN -------------------------------------------  *
    *----------DATA DECLARATION--------------------------------------------*
    data: it_message type standard table of solisti1 initial size 0
    with header line.
    data: it_message1 type standard table of solisti1 initial size 0
    with header line.
    data: it_message2(10) type N.
    data: it_message3 type standard table of solisti1 initial size 0
    with header line.
    data: it_message4 type standard table of solisti1 initial size 0
    with header line.
    data: it_attach type standard table of solisti1 initial size 0
    with header line.
    data: text(150).
    data: t_packing_list like sopcklsti1 occurs 0 with header line,
          t_contents like solisti1 occurs 0 with header line,
          t_receivers like somlreci1 occurs 0 with header line,
          t_attachment like solisti1 occurs 0 with header line,
          t_object_header like solisti1 occurs 0 with header line,
          w_cnt type i,
          w_sent_all(1) type c,
          w_doc_data like sodocchgi1,
          gd_error type sy-subrc,
          gd_reciever type sy-subrc.
    start-of-selection.
    data: lv_date type sy-datum.
    data: lv_date1 type sy-datum.
    data: lv_formatdate(10) type c.
    data: lv_formatdate1(10) type c.
    data: var1(4) type c,
    var2(2) type c,
    var3(2) type c.
    data: begin of int_bseg occurs 0,
        BELNR LIKE BSEG-BELNR,
        ZUONR LIKE BSEG-ZUONR,
        GJAHR LIKE BSEG-GJAHR,
        DMBTR LIKE BSEG-DMBTR,
        HKONT LIKE BSEG-HKONT,
    end of int_bseg.
    data: begin of int_SKAT occurs 0,
        TXT50 LIKE SKAT-TXT50,
        SAKNR LIKE SKAT-SAKNR,
        KTOPL LIKE SKAT-KTOPL,
    end of int_SKAT.
    data: begin of int_bkpf occurs 0,
          BELNR LIKE BKPF-BELNR,
          BUKRS LIKE BKPF-BUKRS,
          GJAHR LIKE BKPF-GJAHR,
          BUDAT  LIKE BKPF-BUDAT,
    end of int_BKPF.
    data: 2days_out type sy-datum.
    2days_out = sy-datum + 2.
    data: var4(4) type c,
    var5(2) type c,
    var6(2) type c.
    *-------- END OF DATA DECLARATION--------------------------------------*
    *--- CONCATENATING AND ARRANGING DATE ---------------------------------*
    lv_date = 2days_out.
    var1 = lv_date+(4).
    var2 = lv_date+4(2).
    var3 = lv_date+6(2).
    concatenate var3 var2 var1 into lv_formatdate separated by '.'.
    *--- END OF CONCATENATING AND ARRANGING DATE  -------------------------*
    *-------------------------SELECTION FOR BSEG---------------------------*
    select zuonr belnr bukrs GJAHR DMBTR HKONT from bseg into
    corresponding fields of  table int_bseg
    where bukrs = 'company name' and
          ZUONR = lv_formatdate.
    *--------------END OF SSELECTION FOR BSEG---------------------------   *
    *-------------------------SELECTION FOR BKPF---------------------------*
    select  BUDAT BUKRS BELNR GJAHR  from BKPF into
    corresponding fields of table int_BKPF
    where bukrs = 'company name'.
    append int_BKPF.
    *------------------END OF SELECTION FOR BKPF---------------------------*
    *-------------------------SELECTION FOR SKAT---------------------------*
    select SAKNR TXT50 from SKAT into
    corresponding fields of  table int_SKAT
    where KTOPL = 'company name'.
    *and      SAKNR = INT_BSEG-HKONT.
    APPEND INT_SKAT.
    *--------------END OF SSELECTION FOR SKAT---------------------------   *
    *-----------------POPULATING EMAIL SUBJECT ----------------------------*
    perform populate_email_message_body.
      perform send_file_as_email_attachment
      tables it_message
      it_attach
      using p_email
      'Maturity after 2 days'
      'XLS'
      'filename'
      changing gd_error
      gd_reciever.
    * Instructs mail send program for SAPCONNECT to send email(rsconn01)
      perform initiate_mail_execute_program.
    *endif.
    end-of-selection.
    *------------END OF POPULATING EMAIL SUBJECT --------------------------*
    *& Form SEND_FILE_AS_EMAIL_ATTACHMENT
    * Send email
    form send_file_as_email_attachment tables pit_message
    pit_attach
    using p_email
    p_mtitle
    p_format
    p_filename
    p_attdescription
    p_sender_address
    p_sender_addres_type
    changing p_error
    p_reciever.
      data: ld_error type sy-subrc,
      ld_reciever type sy-subrc,
      ld_mtitle like sodocchgi1-obj_descr,
      ld_email like somlreci1-receiver,
      ld_format type so_obj_tp ,
      ld_attdescription type so_obj_nam ,
      ld_attfilename type so_obj_des ,
      ld_sender_address like soextreci1-receiver,
      ld_sender_address_type like soextreci1-adr_typ,
      ld_receiver like sy-subrc.
      ld_email = p_email.
      ld_mtitle = p_mtitle.
      ld_format = p_format.
      ld_attdescription = p_attdescription.
      ld_attfilename = p_filename.
      ld_sender_address = p_sender_address.
      ld_sender_address_type = p_sender_addres_type.
    * Fill the document data.
      w_doc_data-doc_size = 1.
    * Populate the subject/generic message attributes
      w_doc_data-obj_langu = sy-langu.
      w_doc_data-obj_name = 'SAPRPT'.
      w_doc_data-obj_descr = ld_mtitle .
      w_doc_data-sensitivty = 'F'.
    ** Fill the document data and get size of attachment
      clear w_doc_data.
      read table it_attach index w_cnt.
      w_doc_data-doc_size =
      ( w_cnt - 1 ) * 255 + strlen( it_attach ).
      w_doc_data-obj_langu = sy-langu.
      w_doc_data-obj_name = 'SAPRPT'.
      w_doc_data-obj_descr = ld_mtitle.
      w_doc_data-sensitivty = 'F'.
      clear t_attachment.
      refresh t_attachment.
      t_attachment[] = pit_attach[].
    * Describe the body of the message
      clear t_packing_list.
      refresh t_packing_list.
      t_packing_list-transf_bin = space.
      t_packing_list-head_start = 1.
      t_packing_list-head_num = 0.
      t_packing_list-body_start = 1.
      describe table it_message lines t_packing_list-body_num.
      t_packing_list-doc_type = 'RAW'.
      append t_packing_list.
    * Add the recipients email address
      clear t_receivers.
      refresh t_receivers.
      t_receivers-receiver = ld_email.
      t_receivers-rec_type = 'U'.
      t_receivers-com_type = 'INT'.
      t_receivers-notif_del = 'X'.
      t_receivers-notif_ndel = 'X'.
      append t_receivers.
      call function 'SO_DOCUMENT_SEND_API1'
        EXPORTING
          document_data              = w_doc_data
          put_in_outbox              = 'X'
          sender_address             = ld_sender_address
          sender_address_type        = ld_sender_address_type
          commit_work                = 'X'
        IMPORTING
          sent_to_all                = w_sent_all
        TABLES
          object_header              = t_object_header
          packing_list               = t_packing_list
          contents_bin               = t_attachment
          contents_txt               = it_message
          receivers                  = t_receivers
        EXCEPTIONS
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          others                     = 8.
    * Populate zerror return code
      ld_error = sy-subrc.
    * Populate zreceiver return code
      loop at t_receivers.
        ld_receiver = t_receivers-retrn_code.
      endloop.
    endform.                    "send_file_as_email_attachment
    *& Form INITIATE_MAIL_EXECUTE_PROGRAM
    * Instructs mail send program for SAPCONNECT to send email.
    form initiate_mail_execute_program.
      wait up to 2 seconds.
      if gd_error eq 0.
        submit rsconn01 with mode = 'INT'
                      with output = 'X'
                      and return.
      endif.
    endform.                    " INITIATE_MAIL_EXECUTE_PROGRAM
    *& Form POPULATE_EMAIL_MESSAGE_BODY
    * Populate message body text
    form populate_email_message_body.
      refresh it_message.
      refresh it_message1.
      refresh it_message3.
       refresh it_message4.
    *--------------- LOOP FOR BSEG -----------------------------------------
      loop at int_BSEG.
    read table int_bKPF WITH KEY BELNR = INT_BSEG-BELNR
            GJAHR = INT_BSEG-GJAHR.
    read table int_SKAT WITH KEY SAKNR = INT_BSEG-HKONT.
    *---CHANGING DATE FORMAT FOR BKPF---------------------------------------
    lv_date1 = int_bkpf-budat.
      var4 = lv_date1+(4).
      var5 = lv_date1+4(2).
      var6 = lv_date1+6(2).
    concatenate var6 var5 var4 into lv_formatdate1 separated by '.'.
    *---END OF CHANGING DATE FORMAT FOR BKPF-------------------------
    it_message =  int_bseg-belnr.
    it_message1 =  lv_formatdate1.
    it_message2 = int_bseg-dmbtr.
    it_message3 = int_bseg-hkont.
    IT_MESSAGE4 = INT_SKAT-TXT50.
    SHIFT IT_MESSAGE2 LEFT DELETING LEADING '0'.
    *-------------POPULATING EMAIL BODY WITH DATA -------------------------
    concatenate 'Maturity After 2Days' 'for'  'G/L account-' it_message3
    '--' IT_MESSAGE4  ',' 'Amount-' it_message2
        into it_message separated by space.
    append it_message.
    append it_message1.
    append it_message3.
      clear it_message.
      clear it_message1.
      clear it_message2.
      clear it_message3.
    endloop.
    *------------END OF LOOP FOR BSEG --------------------------------------
    endform. " POPULATE_EMAIL_MESSAGE_BODY
    <b><i>
    To send an mail with external attachment check this one
    </b></i>
    <i>first create a Include report with the following coding</i>
    *& Include ZPA1_INCLFOR_MAIL *
    * Data
    DATA: docdata LIKE sodocchgi1,
    objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
    objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
    objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
    objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
    objhex LIKE solix OCCURS 10 WITH HEADER LINE,
    reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
    DATA: tab_lines TYPE i,
    doc_size TYPE i,
    att_type LIKE soodk-objtp.
    DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
    * FORM
    FORM ml_customize USING objname objdesc.
    *----------- Clear Variables
    CLEAR docdata.
    REFRESH objpack.
    CLEAR objpack.
    REFRESH objhead.
    REFRESH objtxt.
    CLEAR objtxt.
    REFRESH objbin.
    CLEAR objbin.
    REFRESH objhex.
    CLEAR objhex.
    REFRESH reclist.
    CLEAR reclist.
    REFRESH listobject.
    CLEAR listobject.
    CLEAR tab_lines.
    CLEAR doc_size.
    CLEAR att_type.
    *--------- Set Variables
    docdata-obj_name = objname.
    docdata-obj_descr = objdesc.
    ENDFORM. "ml_customize
    * FORM
    FORM ml_addrecp USING preceiver prec_type.
    CLEAR reclist.
    reclist-receiver = preceiver.
    reclist-rec_type = prec_type.
    APPEND reclist.
    ENDFORM. "ml_customize
    * FORM
    FORM ml_addtxt USING ptxt.
    CLEAR objtxt.
    objtxt = ptxt.
    APPEND objtxt.
    ENDFORM. "ml_customize
    * FORM
    FORM ml_prepare USING bypassmemory whatatt_type whatname.
    IF bypassmemory = ''.
    *--------- Fetch List From Memory
    CALL FUNCTION 'LIST_FROM_MEMORY'
    TABLES
    listobject = listobject
    EXCEPTIONS
    OTHERS = 1.
    IF sy-subrc <> 0.
    MESSAGE ID '61' TYPE 'E' NUMBER '731'
    WITH 'LIST_FROM_MEMORY'.
    ENDIF.
    CALL FUNCTION 'TABLE_COMPRESS'
    * IMPORTING
    * COMPRESSED_SIZE =
    TABLES
    in = listobject
    out = objbin
    EXCEPTIONS
    OTHERS = 1
    IF sy-subrc <> 0.
    MESSAGE ID '61' TYPE 'E' NUMBER '731'
    WITH 'TABLE_COMPRESS'.
    ENDIF.
    ENDIF.
    * Header Data
    * Already Done Thru FM
    * Main Text
    * Already Done Thru FM
    * Packing Info For Text Data
    DESCRIBE TABLE objtxt LINES tab_lines.
    READ TABLE objtxt INDEX tab_lines.
    docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
    CLEAR objpack-transf_bin.
    objpack-head_start = 1.
    objpack-head_num = 0.
    objpack-body_start = 1.
    objpack-body_num = tab_lines.
    objpack-doc_type = 'TXT'.
    APPEND objpack.
    * Packing Info Attachment
    att_type = whatatt_type..
    DESCRIBE TABLE objbin LINES tab_lines.
    READ TABLE objbin INDEX tab_lines.
    objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
    objpack-transf_bin = 'X'.
    objpack-head_start = 1.
    objpack-head_num = 0.
    objpack-body_start = 1.
    objpack-body_num = tab_lines.
    objpack-doc_type = att_type.
    objpack-obj_name = 'ATTACHMENT'.
    objpack-obj_descr = whatname.
    APPEND objpack.
    * Receiver List
    * Already done thru fm
    ENDFORM. "ml_prepare
    * FORM
    FORM ml_dosend.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
    document_data = docdata
    put_in_outbox = 'X'
    commit_work = 'X' "used from rel. 6.10
    * IMPORTING
    * SENT_TO_ALL =
    * NEW_OBJECT_ID =
    TABLES
    packing_list = objpack
    object_header = objhead
    contents_bin = objbin
    contents_txt = objtxt
    * CONTENTS_HEX = objhex
    * OBJECT_PARA =
    * object_parb =
    receivers = reclist
    EXCEPTIONS
    too_many_receivers = 1
    document_not_sent = 2
    document_type_not_exist = 3
    operation_no_authorization = 4
    parameter_error = 5
    x_error = 6
    enqueue_error = 7
    OTHERS = 8
    IF sy-subrc <> 0.
    MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
    WITH docdata-obj_name.
    ENDIF.
    ENDFORM. "ml_customize
    * FORM
    FORM ml_spooltopdf USING whatspoolid.
    DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
    *-------------- Call Function
    CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
    EXPORTING
    src_spoolid = whatspoolid
    TABLES
    pdf = pdf
    EXCEPTIONS
    err_no_otf_spooljob = 1
    OTHERS = 12.
    *------------- Convert
    PERFORM doconv TABLES pdf objbin.
    ENDFORM. "ml_spooltopdf
    * FORM
    FORM doconv TABLES
    mypdf STRUCTURE tline
    outbin STRUCTURE solisti1.
    *-------- Data
    DATA : pos TYPE i.
    DATA : len TYPE i.
    *------------ Loop And Put Data
    LOOP AT mypdf.
    pos = 255 - len.
    IF pos > 134. "length of pdf_table
    pos = 134.
    ENDIF.
    outbin+len = mypdf(pos).
    len = len + pos.
    IF len = 255. "length of out (contents_bin)
    APPEND outbin.
    CLEAR: outbin, len.
    IF pos < 134.
    outbin = mypdf+pos.
    len = 134 - pos.
    ENDIF.
    ENDIF.
    ENDLOOP.
    IF len > 0.
    APPEND outbin.
    ENDIF.
    ENDFORM. "doconv
    <b>
    Then include that report in the following report and copy the same code and paste it there
    </b>
    *& Report ZPA_TEMP147 *
    REPORT ZPA_TEMP147 .
    INCLUDE zpa1_inclfor_mail.
    * DATA
    DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
    DATA : file_name TYPE string.
    data : path like PCFILE-PATH.
    data : extension(5) type c.
    data : name(100) type c.
    * SELECTION SCREEN
    PARAMETERS : receiver TYPE somlreci1-receiver lower case.
    PARAMETERS : p_file LIKE rlgrap-filename
    OBLIGATORY.
    * AT SELECTION SCREEN
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
    CLEAR p_file.
    CALL FUNCTION 'F4_FILENAME'
    IMPORTING
    file_name = p_file.
    * START-OF-SELECTION
    START-OF-SELECTION.
    PERFORM ml_customize USING 'Tst' 'Testing'.
    PERFORM ml_addrecp USING receiver 'U'.
    PERFORM upl.
    PERFORM doconv TABLES itab objbin.
    PERFORM ml_prepare USING 'X' extension name.
    PERFORM ml_dosend.
    SUBMIT rsconn01
    WITH mode EQ 'INT'
    AND RETURN.
    * FORM
    FORM upl.
    file_name = p_file.
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    filename = file_name
    filetype = 'BIN'
    TABLES
    data_tab = itab
    EXCEPTIONS
    file_open_error = 1
    file_read_error = 2
    no_batch = 3
    gui_refuse_filetransfer = 4
    invalid_type = 5
    no_authority = 6
    unknown_error = 7
    bad_data_format = 8
    header_not_allowed = 9
    separator_not_allowed = 10
    header_too_long = 11
    unknown_dp_error = 12
    access_denied = 13
    dp_out_of_memory = 14
    disk_full = 15
    dp_timeout = 16
    OTHERS = 17.
    path = file_name.
    CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
    EXPORTING
    complete_filename = path
    * CHECK_DOS_FORMAT =
    IMPORTING
    * DRIVE =
    EXTENSION = extension
    NAME = name
    * NAME_WITH_EXT =
    * PATH =
    EXCEPTIONS
    INVALID_DRIVE = 1
    INVALID_EXTENSION = 2
    INVALID_NAME = 3
    INVALID_PATH = 4
    OTHERS = 5
    ENDFORM. "upl
    <b>These are the FM for sending external email :-</b>
    SO_DOCUMENT_SEND_API1
    SAPoffice: Send new document with attachments via RFC
    SO_NEW_DOCUMENT_ATT_SEND_API1
    (In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
    SAPoffice: Send new document with attachments via RFC
    Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject.
    SO_NEW_DOCUMENT_SEND_API1
    SAPoffice: Send new document
    <b>Check this sample report</b>
    DATA : BEGIN OF ITAB OCCURS 0,
    PERNR LIKE PA0001-PERNR,
    ENAME LIKE PA0001-ENAME,
    END OF ITAB.
    DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
    receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
    packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
    listobject LIKE abaplist OCCURS 10,
    compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
    w_object_hd_change LIKE sood1,
    compressed_size LIKE sy-index.
    START-OF-SELECTION.
    SELECT PERNR ENAME
    INTO CORRESPONDING FIELDS OF TABLE ITAB
    FROM PA0001
    WHERE PERNR < 50.
    LOOP AT ITAB.
    WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
    SY-VLINE.
    ENDLOOP.
    * Receivers
    receiver_list-recextnam = '[email protected]'. "-->
    * EMAIL ADDRESS
    RECEIVER_list-RECESC = 'E'. "<-
    RECEIVER_list-SNDART = 'INT'."<-
    RECEIVER_list-SNDPRI = '1'."<-
    APPEND receiver_list.
    * General data
    w_object_hd_change-objla = sy-langu.
    w_object_hd_change-objnam = 'Object name'.
    w_object_hd_change-objsns = 'P'.
    * Mail subject
    w_object_hd_change-objdes = 'Message subject'.
    * Mail body
    APPEND 'Message content' TO message_content.
    * Attachment
    CALL FUNCTION 'SAVE_LIST'
    EXPORTING
    list_index = '0'
    TABLES
    listobject = listobject.
    CALL FUNCTION 'TABLE_COMPRESS'
    IMPORTING
    compressed_size = compressed_size
    TABLES
    in = listobject
    out = compressed_attachment.
    DESCRIBE TABLE compressed_attachment.
    CLEAR packing_list.
    packing_list-transf_bin = 'X'.
    packing_list-head_start = 0.
    packing_list-head_num = 0.
    packing_list-body_start = 1.
    packing_list-body_num = sy-tfill.
    packing_list-objtp = 'ALI'.
    packing_list-objnam = 'Object name'.
    packing_list-objdes = 'Attachment description'.
    packing_list-objlen = compressed_size.
    APPEND packing_list.
    CALL FUNCTION 'SO_OBJECT_SEND'
    EXPORTING
    object_hd_change = w_object_hd_change
    object_type = 'RAW'
    owner = sy-uname
    TABLES
    objcont = message_content
    receivers = receiver_list
    packing_list = packing_list
    att_cont = compressed_attachment.
    <b>Settings for sending mail</b>
    Configuring SAP 4.6x Internet mail Gateway
    SAP can be configured to send and receive emails from different sources.This section explains how to integrate SAPOffice with an external emailsystem. Your Internet email must be configured and running prior to this.Email from SAP is forwarded to the users external email system..
    You can configure inbound and outbound forwarding. Outbound flow forwardsa SAP message (eg: update termination) via UNIX sendmail to the intended recepient. Inbound accepts a message from sendmail and places it in the users SAPOffice inbox. Many companies prefer to configure outbound only.
    Configuring outbound forwarding
    SAP configuration
    1. Create your RFC destination for outbound email using transaction SM59
    RFC Destination : SAP_INTERNET_GATEWAY
    Connection Type : T
    Description : SAP internet mail gateway
    Click on 'Explicit Host' if you wanton demand gateway dameon invocation.
    Program : /sapmnt/SID/exe/mlunxsnd
    Target Host : Enter hostname that runs your central instance.
    Click 'Test Connection' and you should seea successfull message.
    2. Shared Office Settings transaction SO16-> Send -> Settings or
    directly via transaction SCOT- SAPconnect Administation
    Nodes - Create
    Node : IMAIL
    Description : SAP internet mail gateway
    RFC Destination : SAP_INTERNET_GATEWAY
    Tick : Internet
    Address Area : *
    Tick : All formats
    Dev. type : Choose an approciate Printer Device
    Set further addresstype : N
    Maximum waiting timefor repeat send attempt procedure : Blank or decide for yourself
    Tick : Node is ready for use
    Setting
    - DefaultDomain : <your company domain>.com
    - Conversionrule : require if your communication device only support one format.
    e.g. if you email system only support the format RAW (ASCII text format)
    Format To Format Ranking Function module
    ALI RAW 1 SX_OBJECT_CONVERT_ALI_RAW (convert APAP List)
    Referto note 171698 - SAPconnect: Formats, conversion, device type
    UNIX configuration
    1 .. cd /sapmnt/SID/exe
    2 ..csh
    ..mlsomadm mailgw.ini
    System Name [C11] :
    Client [000] :
    Username : MAILADM
    Password : MAILADM
    Language : E
    Load Balancing :
    Hostname : <hostname>
    System number : <instance_number>
    Gateway hostname: <central_instance_hostname>
    Gateway Service : <instance number>
    Use SAP Router :
    Trace level :
    Sendmail Command [/usr/lib/sendmail -i -f<SENDER_ADDRESS>]:
    Codepage [ISO-8859-1] :
    Trace Level (Outbound) [0] :
    Update file sapmailsid.cfg? [Y]
    Testing whether your configuration is successful
    1. Logon to SAP
    2. Execute transaction SO01
    3. Write a message and send it to <your_internet_email_address>
    4. If you don't see the mail in your internet mailbox, go back and review steps 1-12
    Schedule the SAP Internet Mail Gateway Jobs to start every 5 minutes
    1. Create
    2. Position your cursor at INT
    3. Click Schedule and supply the date and time
    4. Click Schedule periodically and tick Minutes and type in 5
    5. Click Create and you are done
    6. Click Show Scheduling to check
    Problems that you might encounter :-
    If you have set up a node in SCOT and it tests out well but recieve the reply.
    "Cannot process message in node, parameterscannot be converted".
    Make sure the RFC connection is working, and that SapConnect has been installed on the Unix Server or the Microsoft Exchange Server. Originally, I had the same error, and found that nothing had been installed on Unixor Exchange, to support SapConnect.
    In SCOT (View -> System Status), your mail remains at the Intransit column.
    Check you sendmail.cf files (e.g.Sun Solaris /etc/mail/sendmail.cf). Try using the sendmail command to send a test file at the Unix level. You must be able to send mail at theUnix level before you can send mail at the SAP level.
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/700b405bacdd5fe10000000a155106/content.htm
    http://www.tamboly.com/SAPEmailConfiguration.html
    Check my previous links
    Mail Send
    sending mails from abap program
    Mail Sending to external email id's
    settings needed for sending emails
    Regards
    Pavan

  • Error Sending Mail from SAP

    Hi all,
    I am facing this error when i try to send a mail from Sap to external address. I have maintained the necessary settings in SCOT, maintained the email address in SU01and SAPconnect is activated in transaction SICF.
    No delivery to ..... as recipient unknown
    Can anyone help me out...
    Thanks

    Hello ..
    I have followed the Recommendations and everything is going well but now I can only send emails from the same domain (my default domain), but cannot send outside that domain for example hotmail, gmail, yahoo..
    The administrator said that:  the Exchange server already has registered the IP SAP server to enable him to relay.(but like knowing if it is truth)
    But nothing happens, The error is the same: No delivery to ..... as recipient unknown
    Here is the error: http://img.photobucket.com/albums/v484/mauzzz/SAP/SO01Erroringles-1.jpg
    thanks to all

  • Sending external email from SAP with following requirements...

    Hi All,
           I need to send external emails from SAP by meeting following requirements.
    1) With subject line more than 100 characters.
    2) No attachments, only body which has specific format (blueprint/layout) and would be amended often, hence code shouldn't be touched during amendments.
    3) Should be able to know the success/failure of mail sending at program level.

    Hi,
    The code below demonstrates how to send an email to an external email address
    *& Report  ZSENDEMAIL                                                  *
    *& Example of sending external email via SAPCONNECT                    *
    REPORT  zsendemail                    .
    PARAMETERS: psubject(40) type c default  'Hello',
                p_email(40)   type c default '[email protected]' .
    data:   it_packing_list like sopcklsti1 occurs 0 with header line,
            it_contents like solisti1 occurs 0 with header line,
            it_receivers like somlreci1 occurs 0 with header line,
            it_attachment like solisti1 occurs 0 with header line,
            gd_cnt type i,
            gd_sent_all(1) type c,
            gd_doc_data like sodocchgi1,
            gd_error type sy-subrc.
    data:   it_message type standard table of SOLISTI1 initial size 0
                    with header line.
    *START-OF-SELECTION.
    START-OF-SELECTION.
    Perform populate_message_table.
    *Send email message, although is not sent from SAP until mail send
    *program has been executed(rsconn01)
    PERFORM send_email_message.
    *Instructs mail send program for SAPCONNECT to send email(rsconn01)
    perform initiate_mail_execute_program.
    *&      Form  POPULATE_MESSAGE_TABLE
          Adds text to email text table
    form populate_message_table.
      Append 'Email line 1' to it_message.
      Append 'Email line 2' to it_message.
      Append 'Email line 3' to it_message.
      Append 'Email line 4' to it_message.
    endform.                    " POPULATE_MESSAGE_TABLE
    *&      Form  SEND_EMAIL_MESSAGE
          Send email message
    form send_email_message.
    Fill the document data.
      gd_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
      gd_doc_data-obj_langu = sy-langu.
      gd_doc_data-obj_name  = 'SAPRPT'.
      gd_doc_data-obj_descr = psubject.
      gd_doc_data-sensitivty = 'F'.
    Describe the body of the message
      clear it_packing_list.
      refresh it_packing_list.
      it_packing_list-transf_bin = space.
      it_packing_list-head_start = 1.
      it_packing_list-head_num = 0.
      it_packing_list-body_start = 1.
      describe table it_message lines it_packing_list-body_num.
      it_packing_list-doc_type = 'RAW'.
      append it_packing_list.
    Add the recipients email address
      clear it_receivers.
      refresh it_receivers.
      it_receivers-receiver = p_email.
      it_receivers-rec_type = 'U'.
      it_receivers-com_type = 'INT'.
      it_receivers-notif_del = 'X'.
      it_receivers-notif_ndel = 'X'.
      append it_receivers.
    Call the FM to post the message to SAPMAIL
      call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
           exporting
                document_data              = gd_doc_data
                put_in_outbox              = 'X'
           importing
                sent_to_all                = gd_sent_all
           tables
                packing_list               = it_packing_list
                contents_txt               = it_message
                receivers                  = it_receivers
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
    Store function module return code
      gd_error = sy-subrc.
    Get it_receivers return code
      loop at it_receivers.
      endloop.
    endform.                    " SEND_EMAIL_MESSAGE
    *&      Form  INITIATE_MAIL_EXECUTE_PROGRAM
          Instructs mail send program for SAPCONNECT to send email.
    form initiate_mail_execute_program.
      wait up to 2 seconds.
      if gd_error eq 0.
          submit rsconn01 with mode = 'INT'
                        with output = 'X'
                        and return.
      endif.
    endform.                    " INITIATE_MAIL_EXECUTE_PROGRAM
    Hope this helps.
    Reward if helpful.
    Regards,
    Sipra

  • Sending mail from sap Inbox to outlook

    Hi All,
    Iam new to SAP workflow. Here I need to send the mail from SAP Inbox to Outlook for high priority keeping red flag as icon.
    can anyone tell me how to set up this and go ahead to start.
    Thanks
    Kumar

    IF I understand you correctly, you want to send a mail to Outlook (external email address) as a step in Workflow.
    If you are on Release 6.20 or above the following solution will work. I do not remember what is available in earlier releases.
    1) Define a multiline element based on SOXNA-FULLNAME to hold the email addresses. How you populate this element with the addresses depends on your requirements.
    2) Insert a Send Mail step in the workflow.
    3) In the Mail Tab, Select 'U' as Recipient Type.
    Assign the Multi Line element defined in Step 1 to E-Mail Address.
    4) Define the Subject and the body as needed.
    Please note that you should have External mail sending from SAP enabled and a batch job that runs periodically to push the mail.
    Cheers,
    Ramki Maley.

  • Mails from SAP from Personnel Officer's Name

    Hi Experts,
    Is it possible to send mails from SAP to external system in the name of the personnel officer instead of SAP User Id.
    Request if anyone can help me out with this.
    Have a nice day.
    Regards,
    S.Sriram

    Hi,
    Thanks for your response. Can you tel me where to findREC_NAM = email address, RECESC = 'A' or 'U'.
    Regards,
    S.Sriram

  • How can i send mails from SAP?

    how can i send mails from SAP?
    what are the configurations i have to do in SAP for that?
    pls give me a detail reply......
    if possible, pls give me the sample ABAP program for that.

    recently i have worked on a similar requirement here is the sample code for that
    REPORT ZDOC_AS_EMAIL_3.
    *& Report ZEMAIL_ATTACH *
    *& Example of sending external email via SAPCONNECT *
    TABLES: ekko.
    PARAMETERS: p_email TYPE somlreci1-receiver.
    TYPES: BEGIN OF t_ekpo,
    ebeln TYPE ekpo-ebeln,
    ebelp TYPE ekpo-ebelp,
    aedat TYPE ekpo-aedat,
    matnr TYPE ekpo-matnr,
    END OF t_ekpo.
    DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
    wa_ekpo TYPE t_ekpo.
    TYPES: BEGIN OF t_charekpo,
    ebeln(10) TYPE c,
    ebelp(5) TYPE c,
    aedat(8) TYPE c,
    matnr(18) TYPE c,
    END OF t_charekpo.
    DATA: wa_charekpo TYPE t_charekpo.
    DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
    WITH HEADER LINE.
    DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
    WITH HEADER LINE.
    DATA: l_t_objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
    DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
    t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
    t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
    t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
    t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
    w_cnt TYPE i,
    w_sent_all(1) TYPE c,
    w_doc_data LIKE sodocchgi1,
    gd_error TYPE sy-subrc,
    gd_reciever TYPE sy-subrc.
    *START_OF_SELECTION
    START-OF-SELECTION.
    *Retrieve sample data from table ekpo
    PERFORM data_retrieval.
    *Populate table with detaisl to be entered into .xls file
    PERFORM build_xls_data_table.
    *END-OF-SELECTION
    END-OF-SELECTION.
    *Populate message body text
    perform populate_email_message_body.
    *Send file by email as .xls speadsheet
    PERFORM send_file_as_email_attachment
                        tables it_message
                                it_attach
                            using p_email
        'Example . xls documnet attachment'
                                     'XLS'
                                'filename'
                        changing gd_error
                              gd_reciever.
    *Instructs mail send program for SAPCONNECT to send email(rsconn01)
    PERFORM initiate_mail_execute_program.
    *& Form DATA_RETRIEVAL
    *Retrieve data form EKPO table and populate itab it_ekko
    FORM data_retrieval.
    SELECT ebeln ebelp aedat matnr
    UP TO 10 ROWS
    FROM ekpo
    INTO TABLE it_ekpo.
    ENDFORM. " DATA_RETRIEVAL
    *& Form BUILD_XLS_DATA_TABLE
    *Build data table for .xls document
    FORM build_xls_data_table.
    *CONSTANTS: con_cret(2) TYPE c VALUE '0D', "OK for non Unicode
    *con_tab(2) TYPE c VALUE '09'. "OK for non Unicode
    *If you have Unicode check active in program attributes thnen you will
    *need to declare constants as follows
    class cl_abap_char_utilities definition load.
    constants:
    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
    con_cret type c value cl_abap_char_utilities=>CR_LF.
    CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
    INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach.
    LOOP AT it_ekpo INTO wa_charekpo.
    CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
    wa_charekpo-aedat wa_charekpo-matnr
    INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach.
    ENDLOOP.
    ENDFORM. " BUILD_XLS_DATA_TABLE
    *& Form SEND_FILE_AS_EMAIL_ATTACHMENT
    *Send email
    FORM send_file_as_email_attachment tables pit_message
                                              pit_attach
                                           using p_email
                                                p_mtitle
                                                p_format
                                              p_filename
                                        p_attdescription
                                        p_sender_address
                                    p_sender_addres_type
                                        changing p_error
                                              p_reciever.
    DATA: ld_error TYPE sy-subrc,
    ld_reciever TYPE sy-subrc,
    ld_mtitle LIKE sodocchgi1-obj_descr,
    ld_email LIKE somlreci1-receiver,
    ld_format TYPE so_obj_tp ,
    ld_attdescription TYPE so_obj_nam ,
    ld_attfilename TYPE so_obj_des ,
    ld_sender_address LIKE soextreci1-receiver,
    ld_sender_address_type LIKE soextreci1-adr_typ,
    ld_receiver LIKE sy-subrc.
    ld_email = p_email.
    ld_mtitle = p_mtitle.
    ld_format = p_format.
    ld_attdescription = p_attdescription.
    ld_attfilename = p_filename.
    ld_sender_address = p_sender_address.
    ld_sender_address_type = p_sender_addres_type.
    *Fill the document data.
    w_doc_data-doc_size = 1.
    *Populate the subject/generic message attributes
    w_doc_data-obj_langu = sy-langu.
    w_doc_data-obj_name = 'REPORT'.
    w_doc_data-obj_descr = ld_mtitle . "mail description
    w_doc_data-sensitivty = 'F'.
    *Fill the document data and get size of attachment
    CLEAR w_doc_data.
    READ TABLE it_attach INDEX w_cnt.
    w_doc_data-doc_size =
    ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
    w_doc_data-obj_langu = sy-langu.
    w_doc_data-obj_name = 'SAPRPT'.
    w_doc_data-obj_descr = ld_mtitle.
    w_doc_data-sensitivty = 'F'.
    CLEAR t_attachment.
    REFRESH t_attachment.
    t_attachment[] = pit_attach[].
    *Describe the body of the message
    CLEAR t_packing_list.
    REFRESH t_packing_list.
    t_packing_list-transf_bin = space.
    t_packing_list-head_start = 1.
    t_packing_list-head_num = 0.
    t_packing_list-body_start = 1.
    DESCRIBE TABLE it_message LINES t_packing_list-body_num.
    t_packing_list-doc_type = 'RAW'.
    APPEND t_packing_list.
    *Create 1st attachment notification
    t_packing_list-transf_bin = 'X'.
    t_packing_list-head_start = 0.
    t_packing_list-head_num = 1.
    t_packing_list-body_start = 1.
    DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
    t_packing_list-doc_type = ld_format.
    t_packing_list-obj_descr = ld_attdescription.
    t_packing_list-obj_name = ld_attfilename.
    t_packing_list-doc_size = t_packing_list-body_num * 255.
    APPEND t_packing_list.
    **Create 1st attachment notification
    *t_packing_list-transf_bin = 'X'.
    *t_packing_list-head_start = 0.
    *t_packing_list-head_num = 1.
    *t_packing_list-body_start = 1.
    *DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
    *t_packing_list-doc_type = ld_format.
    *t_packing_list-obj_descr = ld_attdescription.
    *t_packing_list-obj_name = ld_attfilename.
    *t_packing_list-doc_size = t_packing_list-body_num * 255.
    *APPEND t_packing_list.
    **Create 2nd attachment notification
    data: x type i.
    DESCRIBE TABLE t_attachment LINES X.
    append lines of it_attach to t_attachment.
    data: start type i,
          end type i,
          cal type i.
    start = X + 1.
    describe table t_attachment lines end.
    cal = end - start.
    t_packing_list-transf_bin = 'X'.
    t_packing_list-head_start = 0.
    t_packing_list-head_num = 1.
    t_packing_list-body_start = start.
    t_packing_list-body_num = end.
    *DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
    t_packing_list-obj_descr = 'Eng Change'. "ld_attdescription.
    t_packing_list-doc_type = ld_format.
    *t_packing_list-obj_name = 'Eng' .
    t_packing_list-doc_size = t_packing_list-body_num * 255.
    APPEND t_packing_list.
    *Add the recipients email address
    CLEAR t_receivers.
    REFRESH t_receivers.
    t_receivers-receiver = ld_email.
    t_receivers-rec_type = 'U'.
    t_receivers-com_type = 'INT'.
    t_receivers-notif_del = 'X'.
    t_receivers-notif_ndel = 'X'.
    APPEND t_receivers.
    CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
    document_data = w_doc_data
    put_in_outbox = 'X'
    sender_address = ld_sender_address
    sender_address_type = ld_sender_address_type
    commit_work = 'X'
    IMPORTING
    sent_to_all = w_sent_all
    TABLES
    packing_list = t_packing_list
    object_header = l_t_objhead
    contents_bin = t_attachment
    contents_txt = it_message
    receivers = t_receivers
    EXCEPTIONS
    too_many_receivers = 1
    document_not_sent = 2
    document_type_not_exist = 3
    operation_no_authorization = 4
    parameter_error = 5
    x_error = 6
    enqueue_error = 7
    OTHERS = 8.
    *Populate zerror return code
    ld_error = sy-subrc.
    *Populate zreceiver return code
    LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
    ENDLOOP.
    ENDFORM.
    *& Form INITIATE_MAIL_EXECUTE_PROGRAM
    *Instructs mail send program for SAPCONNECT to send email.
    FORM initiate_mail_execute_program.
    WAIT UP TO 2 SECONDS.
    SUBMIT rsconn01 " WITH mode = 'INT'
    "WITH output = 'X'
    AND RETURN.
    ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
    *& Form POPULATE_EMAIL_MESSAGE_BODY
    *Populate message body text
    form populate_email_message_body.
    REFRESH it_message.
    it_message = 'Please find attached a list test ekpo records'.
    APPEND it_message.
    endform. " POPULATE_EMAIL_MESSAGE_BODY

  • Error while sending mail from SAP

    Hello All,
    Recently we are facing an error while sending mail from SAP. When we try to compose a message ,it is moving to a dump error RAISE_EXCEPTION.
    The details from ST22,
    Short text
        Exception condition "FOLDER_NOT_EXIST" raised.
    Error analysis
        A RAISE statement in the program "SA
        condition "FOLDER_NOT_EXIST".
        Since the exception was not intercep
        program, processing was terminated.
    Kindly suggest..
    Thank You,
    Regards,
    Hasan

    Hello Priyanka,
    Actually, I performed the following two steps in order to solve the issue:
    - In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
    - Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix  xyz.com.
    But for me the problem didnt get solved here..
    The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
    You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
    Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
    Regards,
    Himanshu

Maybe you are looking for

  • Windows on Mac Book Pro

    My Dell crashed and died. I finally changed to Apple and now I am using a MacBook Pro. So, I am making the change after being on the dark side for decades so hang in there with me. Here is my issue: I have had issues with my WildGame Innovations Trai

  • Can't get Photoshop CS6 to print quickly.

    Since November, CS6 has been taking longer and longer to print simple photos.  Today it took over a hour to go from "print" command to final 2 8x10 images.  Any ideas?  I have reloaded the print driver and CS6 today without sucess.

  • The backup disk image "/Volumes/Data/Macintosh.sparsebundle" is already in use.

    Now what, how do you fix this???

  • IPod Nano will not work

    My daughter has had her iPod Nano 8GB for about 10 months and now it will only play when its attached to the computer. What is causing this and how can it be fixed?

  • Define Default Values for Value Categories-reg

    Hi Experts, What will be the effect in cost tab in MO,if I dont maintain the Define Default Values for Value Categoriesin SPRO.Because by just maintaining Value categories and its cost element assignment,Iam getting the planned and actual cost in cos