External MIDI device, can't get more than one sound, Logic Express 9 & Korg N364

Hi, I just beginning to use Logic. I trying to get Logic Express 9 to work with and use my Korg N364 keyboard/workstation as an external MIDI device. I can only get one sound at a time even though I create multiple tracks and assign different programs (or patches) to them.
  Each time I do the following: I add a new external MIDI track, change the Channel to new number, put a check in the Program box ( as well as the Volume & Pan), and choose a instrument or patch from the Program drop down menu. What happens, though, it changes the sound to that instrument alright, but ALL THE PREVIOUS EXTERNAL MIDI TRACKS HAVE THE SAME SOUND NOW. I've followed the tutorials I found on the web and it seems like I'm doing everything correct in Logic. I hooked up the MIDI cables, added a new device and connected virtual cables in the MIDI studio window of my Mac OS, and have added the proper Korg multi instrument in the environment window of Logic and "un-slashed" the 16 channels. I get the sounds from the Korg no problem, it's just that I can only assign one sound and no more to the external MIDI tracks. Is there something in my Korg I need to do? Or am I missing something in Logic?

It's not Logic, it's how you have the Korg setup.
I'm not familiar with that model but it is a workstation so I'm pretty sure you can set it to a "Multi" mode.
Right now you are running it in single patch mode.
In single patch mode only one sound is available on a single MIDI channel, your Korg probably has a Multi or Combi mode, this is where multiple sounds can be played, each sound has to have it's own MIDI channel.
You will need to set this up on the Korg first.

Similar Messages

  • How can I get more than one firewre port ?

    Hello,
    how can I get more than one firewire port ? I'd like to be able to connect my canon HV30 camera as well as my firewire external HD at the same time so I can use firewire to upload the videos I've taken. Is this possible?
    TIA

    Hi ginestre-
    Many FireWire hard drives have 2 firewire ports so that you can daisy-chain devices and connect the camera that way.
    Daisy-chaining is not the most reliable method, but it works, so you could buy a FireWire hub.
    Luck-
    -DP

  • Can not get more than one computer to access internet

    using airport and can not get more than one computer to access internet wirelessly... currently airport is in bridge mode and internet sharing is set to "off" in network preferences...
    help - what should the settings be in airport and network preferences?

    are using internet connection as dhcp?
    Yes.
    bridge mode seems to only work with pppoe connection to internet which is what my set up is
    But you've never said why you're using bridge mode (I'm not), which -- as I've explained before -- is probably the reason you can connect only 1 client at a time.
    If you'll setup the AX as a regular, main base station, connect using DHCP, and share IP addresses, you should be fine.

  • Can I get more than one account on iphone microsoft exchange server

    Hi all,
    I was trying to get more than one account on iphone microsoft exchange server for mail, but it seems to only accept one. Is this true with everyone else out there. I guess I am one of the few people with more than one email account that uses microsoft exchange. I would love to have the convience of accessing them through iphone mail but it seems that I will be forced to use safari for the other two by typing owa... in the url.
    any workaround to the one email account per iphone policy??

    Yu can only have one Exchange Server account per device. This is true to iPhone and any Windows mobile device in the market. The work around is to set your other accounts that reside on an Exchange server using IMAP or POP settings as you used to do before the Version 2 update allowed you to sync directly to the Exchange Server. This methode will allow you to add as many accounts as you want or have.

  • I can't get more than one window of Firefox to open no matter what I try. Help!

    I recently had a virus and had to do a system restore to about a month ago. After the restore everything worked okay, except for Firefox. Now I can't open more than one Firefox window at a time and the window that is open is having a bunch of problems (right clicking won't open things into tabs, the back button isn't working, etc.). I've tried uninstalling and reinstalling Firefox, but that did nothing.
    == Yesterday

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • Can't get more than one month of backups with Time Machine

    I seem to be having persistent problems with TM. I have a 1TB HD and in the past I have been able to get up to several months of backups from around 140GB with exclusions. However, lately I seem to be plagued with "SystemFlipper" messages that start a full backup and result in the removal of previous backup such that I seem unable get have more than just over one month of backups.  This seem to occur mostly at the first backup of each day and then works fine for each subsequent hour after doing the "Full Reset" as per Pondini (http://pondini.org/TM/A4.html). Other days it seems to work fine.
    I have been reviewing other related discussion in this forum and cannot seem to find an answer. It is possibly to do with residual pre-Intel programmes is the best I can determine, but the problem is how to find the culprits in my list of applications either remove them all together or transfer them to another HD I use for non-essential data and files. I have done this for a lot of other data and have added exclusions for some file that were giving me identified issues.
    Would appreciate any suggestions as I'm getting a little frustrated at having to do a reset so often, and  not being able have a greater time period of backups given that there was a time when I had nearly a year's worth.
    Thanks, Dave

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • XFi Can't Handle more than one sound at a time?!?

    I bought an XFi Elite Pro and it was working great. Now, however, it will only handle one sound at a time. For example, if I'm playing a song in iTunes and windows makes a sound, the itunes song cuts out, the windows sound plays, then itunes abruptly cuts back in. Same thing in games. If I'm playing Warcraft the sound will cut out if Windows makes some kind of a sound.
    How do I get my card back to being able to play multiple sounds/music simultaneously? I'm running Vista Ultimate on a Quad Core system with 4 gigs of RAM.

    Sound like something messed up somehow. Maybe you can consider reinstalling the drivers again? @28.86.2.0

  • Can't get more than one mac online at once with aiport express

    Hi, I hope someone can help - I've searched the forum and been on the phone to level 2 support at Apple for 6 hours to no avail!
    I have a D-Link DSL 300G+ modem connected to an airport express and can connect to the internet fine on just one mac if I uncheck the 'Distribute IP addresses' option - if I check this option, whatever settings I have entered has prevented me from accessing the internet at all (I have no idea what settings to enter, I have just followed suggestions from Apple).
    This problem arose when following Apple's diagnostics on a minor ichat issue, I disconnected my modem and reset my AX settings (until then everything had been fine.) I have called my ISP and D Link and they tell me the issue is with the AX.
    This is my first posted question so I hope I have given all the relevant and necessary information.
    Much appreciate any help at all.
    Thanks,
    Wayne.

    Hello Wayne Rosie. Welcome to the Apple Discussions!
    Let's double-check your AirPort Express Base Station's (AX) settings ...
    Perform a "factory default" reset of the AX
    o (ref: http://docs.info.apple.com/article.html?artnum=108044)
    Modem/Router Power ReCycling
    o Power-off the ADSL modem, AX, & computer(s); Wait at least 30 minutes.
    o Power-on the ADSL modem; Wait at least 15 minutes.
    o Power-on the AX; Wait at least 5 minutes.
    o Power-on the computer(s)
    Either connect to the AX's wireless network, or temporarily connect your computer directly using an Ethernet cable to the Ethernet port of the AX, and then, using the AirPort Admin Utility, check these settings:
    AirPort tab
    o Base Station Name: <whatever you wish or use the default>
    o AirPort Network Name: <whatever you wish or use the default>
    o Create a closed network (unchecked)
    o Wireless Security: Not enabled
    o Channel: Automatic
    o Mode: 802.11b/g Compatible
    Internet tab
    o Connect Using: Ethernet
    o Configure: Using DHCP
    o WAN Ethernet Port: Automatic
    Network tab
    o Distribute IP addresses (checked)
    o Share a single IP address (using DHCP & NAT) (enabled)
    Once you verified that you can get Internet access for all of your computers, you should secure your wireless network.

  • Can't get more than one gmail calendar to show up.

    I have linked my iTouch to my gmail account.  I can get to all my email and contacts but it has only brought over 1 calendar.  Is there a way to get the rest of my calendars to show up?

    Hi,
    See my post here:
    https://discussions.apple.com/message/15253863#15253863
    Best wishes
    John M

  • Can't get more than one Ultrabeat sound setting in one project. If I have a drum track with an Ultrabeat "downtempo kit" and I make another drum track with "hip hop kit" in the same project, the settings of the other track transform to "hip hop" setting.

    So here's my situation.  I'm using Logic Pro 9.  I'm trying to use multiple drum tracks each with different Ultrabeat settings.  So let's say I have drum track with a loop from Ultrabeat that has the "downtempo kit 2" setting on it.  If I make another drum track and create a different loop in Ultrabeat with a different setting, let's say "hip hop kit" for example, and put that loop onto the new track, then the previous loop that I had in the first drum track will still be the same loop but the sound kit settings change to that of "hip hop kit."  So I can have different loops, but they all have to be "hip hop kit" settings or "downtempo kit 2" settings.  I am unable to multiple kit settings.  Is there a box I need to check to turn some automation off or something, because this is pretty inconvinient?  Why do I have to have only one Ultrabeat sound/kit setting per Logic project?

    Sounds like maybe you're using the same channel strip on multiple tracks? Make sure you're creating a new software instrument channel strip for each independent instance of Ultrabeat you want to have. If you use the same CS, then all tracks that use it will have to have the same kit.

  • Can I get more than one song to accompany a slideshow on my iPad?

    I have set up a slideshow on my iPad. I have created a playlist for it but only the first song in the play list plays and then repeats. I would like the songs on the playlist to play in sequence during the slideshow. Any suggestions?
    Thanks

    It depends on your apps.
    Photo Manager Pro allows 4 songs on Slideshows.

  • How To Get more than one Return Values in LOV ADF

    In ADF LOV, I can get only one return value;
    How can I Get more than one values like in Oracle Form?
    SomeOne can help me?
    Thanks

    you may add more <set> tag like the following:
    <event name="lovSelect">
    <set property="inputValue" value="${bindings.Id.inputValue}" target="${data.work_workBusinessViewUIModel.buyCompanyId}"/>
    </event>
    or you can implement your Action

  • Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

    Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

    You can seach the net for solutions like this one http://appletvvpn.com/how-to-connect-apple-tv-2-to-vpn/ another idea is to use a PC as the control and fit that with a wireless card and set up a ad hoc wireless network that the Apple TV uses. 

  • Can't connect more than one device.

    I just bought an Airport Express 2 gen from a friend and I have two issues: I tried to reset it to factory settings and could not do it. Tried holding the reset button for 10 secs, unplugging and plugging back in while holding the reset button, holding the button for a longer time and nothing worked. I had no choice but to create another network. Once created, I can't connect more than one device. If I have my MacAir hooked up the network and I try to get my Ipad in, the minute I type the network pass in my Ipad, a screen pops up where I have to log in with my internet provider account. When I do that, it will connect, but my MacAir will disconnect automatically.
    Appreciate any help!

    Things are a bit different with the 2nd Gen AirPort Express and other newer AirPorts.
    A Factory Default Reset is now the same as what was previously known as a "Hard Reset".
    Power up the AirPort Express and let it run a few minutes.
    Hold in the reset button on the Express for 10 seconds
    Release the reset button and allow a full minute for the Express to restart to a slow, blinking amber light
    If the Express is operating correctly, it will be back to factory default settings at this time.
    If you try the reset a few times and the Express will not return to default settings, the Express is defective.

  • Error 5006:  can't have more than one externally visible definition

    Hi
    I'm getting this error:
    5006: An ActionScript file can not have more than one
    externally visible definition: AMReports, playSound.
    playSound is a function in my main document class
    The error occured after I added a MovieClip and FLV component
    to my the same framemain timeline. This Movie Clip has 3 frames.
    I'll be using cue points added to the FLV component to move this
    from frame to frame in that MovieClip.
    Any one have an idea why this is happening?
    Thanks.

    I fixed this problem: a brace was in the wrong place.

Maybe you are looking for

  • Count rows in a table being retrieved from dba_segments

    Hello guys, I was wondering how can I count the rows in a table that is being retrieved from dba_segments. -- I am getting the table name from dba_segment -- Is it possible to count the number of rows in that table at the same time? -- If not, is the

  • Scheduling of Web Intelligence Reports - (BO Xi 3.0)

    Hi, I have scheduled 8 webintelligence reports using CMC based on file based event.Most of the time it has been observed that the Webi services got down when the scheduled report starts processing.The reports runs in few seconds and the data returned

  • Enterprise Services Queries

    Hi All, All of us know about enterprise services. I've few queries regarding that...... 1) Can I access Enterprise Services without CE 7.1 or PI 7.1?     If no, it is mentioned that SAP has delivered some      enterprise serevies in 2006 also, then h

  • Why are my permissions greyed out when sharing a fat32 drive?

    I want to share a Fat32 drive between two macs on my network but the read/write permissions are greyed out. I can't reformat to ex-fat or the mac format HFS because I also want to use this drive in my TV and that only accepts Fat32 drives. Is there a

  • Library path error

    package com.epic.hsm; public class HsmStatus {      static { System.loadLibrary("mk2api"); }      public void HsmSt(){           //MK2API h= new MK2API();      public static void main(String[] args) {           new HsmStatus().HsmSt(); //error i got