External monitor resolution in Vista on MacBook Pro

I am running Vista Ultimate on a MacBook Pro. I have a Dell 24" external monitor plugged in, which supports a top resolution of 1920 x 1200. But Vista thinks it's a generic non-PnP monitor with a top resolution of 1024 x 768. I have installed the Windows drivers from my Leopard disk, but neither the Vista Displays control panel nor the nVidia software think the resolution of this monitor can go any higher. I tried looking on nVidia's site for newer drivers, but they said for the M series video cards to go to the computer manufacturer for drivers because they modify them for power consumption and other special needs.

I found the solution.
Go here:
http://www.laptopvideo2go.com/forum/index.php?showtopic=17701
Click on Driver to download it.
Extract it
Go to
http://www.laptopvideo2go.com/forum/index.php?showtopic=17701 again
Click on Modded INF to download it.
Copy it to the extracted folder.
Run setup.exe
You now have full control over your nvidia card. Which also means you can plug in external monitors
Tested on Macbook pro 15" with nvidia 8600M GT.
Message was edited by: mwthrane

Similar Messages

  • I've connected my external monitor (LG) to my new Macbook Pro 15" laptop, using the adaptor for VGA...the display now has a large black bar along the left side.  No adjustment on the monitor will fix it, no "options" on System Prefs either...any ideas?

    I've just purchased a new Macbook Pro, and connected it ot my external monitor (24" LG HD) using an Apple VGA adaptor.  The only resolution that looks good is the 1920 x 1080, but the image does not entirely fill the screen.  There is a large black gap on the left side of the screen now.  It worked fine with my "last generation" Macbook Pro...no adjustment on the monitor will help, and cannot find any System Setting in displays such as "options" or widescreen setting.  I've gone to the LG site, but no "Mac" related tech support issues come up...no forum here seems to deal with this particular issue either...any ideas?

    I have the same thing but with a 23 inch HP, worked fine with my MBP 13 from 2009 but the 2011 2.4 i5 does the exact same thing as yours!
    Very confused and hoping that some one else can help.
    Thanks

  • Can't connect external monitor to Windows 7 bootcamp Macbook Pro 15 - ATI 6770

    I recently puchased a Macbook pro 15 in 2012.  I have bootcamp set up and am running windows 7 home on the bootcamp partition.  When in windows I am unable to use an external monitor or overhead projector.  I have updated all of the ATI drivers and have fiddled with screen resolutions and display refresh rates to no avail.  I am using a cheapo mini displayport to VGA adapter which I have confirmed works while I am using the mac side of the machine. 
    Unfortunately I have to use windows while at work and using a projector to display data is essential.
    I am out of ideas at this point --  Help - - Please!!

    I was hoping some of the multi/monitor people would show up and help you but I guess they missed it.
    Have you gone into the Properties of the video drivers (via the Device Manager) and let it Update Driver either through the internet or migrate to the newer Boot Camp video drivers you recently downloaded?
    The only other thing I can suggest is to completely delete the video drivers then reinstall them manually either through the Programs and Features control panel or in the Device Manager/ Video drivers and see if it "takes".
    Don't forget you do have an Apple Software Updater in Windows also. It updates the Windows support software from Apple. (Boot Camp)
    Sorry I can't help more........

  • Getting an Acer external monitor to work with a MacBook Pro

    I just made the switch from PC to Mac and while I'm excited I'm having a few growing pains. Here's one thing I'm trying to figure out.
    Both at home and at the office I have external monitors configured. These worked well with the PC but I having some problems with the Mac. I get the screens to work together fine (i.e. I can drag things from the laptop screen to the external monitor). However, the resolution on the external monitor is grainy. I've tried all the resolution setting and can't get it to work any better.
    The Mac is a MacBook Pro with a 15.4" screen and the external monitor is an Acer AL2216Wbd.

    two possibilities>
    1. you're using analog cable to connect to external display (via dvi to vga adapter-but that is not the case obviously, because otherwise you could set the ref. rate for 60 or 75Hz - now its greyed out) anyway, when I used this set up, I noticed huge degradation of displaying quality. kinda washed out and blurred. but not grain at all
    2. but what is more presumable in your case, you're using photo background provided by apple...these pictures are grainy by themselve. and when you extend your desktop from 15" to 20" it's clear that you notice it, all the more, if the external is not widescreen, therefore background image has to be stretched and cropped even more, therefore the grain is even bigger. This is my personal experience.
    try to test it. put to the background for example some gradient made especially for that purpose in ill or ps. make two versions for both screens.
    thats all
    good luck

  • HT3131 how can i connect 2 external monitors(VGA) to my 2007 macbook pro

    I would like to use 2 external monitors simultaneously with my clamshell closed. I have external keyboard and mouse but need to know how to and what to buy in order to achieve this.....havent found anything straight forward on apple site, like a vga dual monitor splitter, so am in need of some advice on how to do this please!

    Thanks for the reply. Haven't gotten anything as yet. Just that I burned out my older PowerBook using it as a primary screen w/ a secondary 20" monitor. Would be nice if the MacBooks could be used as a CPU only, connect 2 different monitors, and use the LCD screen when portability is needed. But I suppose that is why Apple makes different types of computers. I know I can rig the video SCSI cable to bypass to LCD screen and use the other built-in monitor. But there goes the warentee and any kind of AppleCare... not that I have ever used it, (until a day after it has expired!)
    But thanks for the feedback. Your reply is what I expected. Being that I am a mercenary graphic designer and need to be able to work whenever, and where-ever I need to, the MacPro is not my hardware of choice. As well, I don't have $4000 in my budget. But man do those machines rock! Just think of what NASA could have done with one of those in 1969 when we were going to the moon! But now that the U.S. has decided that manned space travel and even scientific space exploration is not worthy of having a budget, the MacPros are religated to creating new episodes of Jersey Shores!
    Thanks again for your feedback!

  • External Monitor RGB Noise Flickering with MacBook Pro

    Hi folks,
    I recently bought a MacBook Pro and plugged into it an HDMI converter to DVI, so I can plug into the MBP the LCD Apple Cinema Display of 22" and have 2 monitors working or, just one while using the hardware of the MBP.
    The MBP has 8 GB of RAM of 1333 MHz and an additional ATI video card of 1 GB.
    So, when working with the Apple Cinema Display plugged into the MBP, some kind of fast graphic anomaly occurs, which looks like an RGB noise. And that happens in a blink, each about 5 to 10 minutes and only in the Apple Cinema Display.
    I'm wondering why happens this, because I need the big screen to work. Also, the MBP costs me a lot of money (US $4000 because I live in Argentina) and we don't have here the easiness to go and buy another or change the product because of a "just in case" thing due many other implications from the actual government.
    So please, let me know why this happens and if it's dangerous. I don't wish my hardware get broke because I use it to work an there are no replacements here.
    Thanks,
    Ø3

    I ended up buying the HDMI cable and adapter for the mac and the screen quality is GREAT! It auto sets itself to 1080p. Don't use VGA. Get the HDMI cable and adapter.
    Again, the horizontal lines are from me taking a picture of my monitor from my iphone.
    I hope this solves your problem.

  • I downloaded the new osx mavericks system, and it would not recognize my external monitor.  I have a macbook pro.

    Any ideas on how to get my new osx mavericks that i just downloaded to recognize my external monitor?

    Hello maggiefromloudon,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Best of luck,
    Mario

  • External monitor/display for a 2012 MacBook Pro?

    I want to know if I can connect an Acer S201HL to a 2012 MacBook Pro i7 2.9GHz 8GB memory OSX10.8.1 - I will be using a magic mouse and apple wireless keyboard as well - if this setup will work what specific cables and adapters do I need to get? If at all possible I would consider running 2 displays. also running Parralells with Windows 7 Home Premium.

    With athundebolt diplay there might be some info here that might help.
    http://support.apple.com/kb/HT5219
    If you have a mini DVI port you would need a moni DVI to VGA adapter, and a VGA cable

  • Upon rebooting my left and right external monitor on my Snow Leopard Macbook Pro switch sides, right to left.

    I'm using two plugable UGA-2K-A ( http://plugable.com/products/UGA-2K-A/ ).  They work great for USB graphics, but how can I stop the configuration changes?

    I found the solution to this problem on another website, tried it and it worked!!!
    10.6: Re-enable LCD font smoothing for some monitors
    Mon, Aug 31 2009 at 7:30AM PDT • Submitted by astrosmash
    There is a bug in Snow Leopard that disables LCD (sub-pixel) font smoothing on many third party LCD displays, including models from Dell, Samsung, LG, HP, EIZO, and Lenovo. Here are the details:
    Snow Leopard introduces simplified Font Smoothing options under the Appearance pane in System Preferences. Prior to Snow Leopard, the available options were:
    Automatic - Best for Main Display
    Standard - Best for CRT
    Light
    Medium - Best for Flat Panel
    Strong
    In Snow Leopard, you can only choose between Automatic and Standard CRT. Since few people use CRTs these days, most users now have only one option: Automatic. The problem with the Automatic option is that OS X incorrectly detects many third party LCD monitors as CRTs, and consequently, disables LCD font smoothing.
    You can force OS X to use LCD font smoothing on all displays with this Terminal command:
    defaults -currentHost write -globalDomain AppleFontSmoothing -int 2
    The number 2 here corresponds to Medium - Best for Flat Panel. You may also use 1 for light smoothing, and 3 for strong smoothing, as per the original OS X font smoothing options.

  • Run two monitors from my 15-inch MacBook Pro (Non-retina, mid 2012)?

    I'm looking to run two monitors from my 15-inch MacBook Pro (Non-retina, mid 2012). I don't want to use the actual laptop screen in this setup, I just want to use the two external monitors.
    My 15-inch MacBook Pro (Non-retina, mid 2012) has the following ports on the side:
    FireWire 800 port (up to 800 Mbps)
    Two USB 3 ports (up to 5 Gbps)
    Thunderbolt port (up to 10 Gbps)
    I currently use the Thunderbolt port to one external monitor.
    My question is: Is it better to run the second monitor via USB 3, or FireWire (if that's even possible)? What would you recommend?

    See -> http://www.matrox.com/graphics/en/products/gxm/dh2go/digital_me/.
    Good and simple way to get two monitors from one Thunderbolt port.
    Clinton

  • External VGA Projector Screen Blue when MacBook Pro Connected

    I love using my laptop for Powerpoint and Keynote presentations at work. I used to have a Powerbook 1.5GHz 15" and now have a MacBook Pro 2.2GHz 15". With some external VGA projectors, after connecting the MacBook Pro, everything works great. I turn off mirroring and my presentation goes smoothly.
    However, with some particular external VGA projectors, I get a connection problem. After using my DVI-to-VGA cable to connect my MBP to the projector, nothing happens. The projector continues to project a blue screen as though nothing is connected to it and as though it has no video source. I've cycled through the projectors input selections hoping the projector would find the signal but still nothing. I've even restarted my MBP with the cables attached to the projector and still the projector shows a blue screen.
    My friends can connect their PC Windows XP and Windows Vista computers to this same projector with no problems. I used to have this same problem with my PowerBook G4 which is one of the reasons I upgraded to the new MBP hoping this problem would be resolved. What's wrong and what can I do to get my MBP compatible with the external projector?

    Sorry, I meant the cable that links between the connector and the input to the projector (RGB - IN by the way, not OUT).
    We have a number of these VGA cables at my place of work that will work with a PC but not a Mac. Some are fine. My technician holds on to a cable for me that we know works and if I get a bad one, he brings in the replacement and it takes a few seconds to go online. I also note that some of the projectors (particularly ceiling mounted ones) have an additional adapter between the cable and the projector. It may be that some of the pins are not connected.
    Of course, if the projector is mounted too high, that would not allow easy replacement.
    I would suggest finding a cable that works and carrying that around.

  • Hello! Help please! Best external hard drive preferably 1TB for macbook pro 2011. thank you!!!

    Hello! Help please! Best external hard drive preferably 1TB for macbook pro 2011. thank you!!!

    You can pickup any 1TB USB powered drive for about $100 at just about any local office supply store.
    It comes formatted FAT32 (MSDOS) for reading by OS X and Windows PC's.
    However if your files sizes are going to be larger than 4GB in size (like video tends to be) then your going to need to select the drive in OS X's Disk utility (in the Applicaitons > Utilities folder) and format the drive exFAT instead.
    exFAT is a drive format that 10.6.5 and later Mac's, Windows Vista and 7 machines can read just fine. XP machines need a free exFAT drive install from Microsoft.
    Do backup the 1TB to another 1TB drive using Carbon Copy Cloner or another backkup utility because 1TB is a lot of data to lose on a $100 drive.
    I don't advise the "port powered" USB drive as these tend to have power issues and with 1TB of data on it, very risky. Use a powered drive if you can all help it.

  • How can i copy files from one external hard disk to another using macbook pro with retina display

    How can i copy files from one external hard drive to another using macbook pro with retina display?

    That's odd - if you open Disk Utility (Applications->Utilities) and select the disk(s), how are they formatted? If you're only going to be used with your Mac, they should be formatted as "Mac OS Extended (Journaled)".
    Clinton

  • HT2729 Digital Copies to my IMac with external hard drive, then on my MacBook Pro I can see the movies, but if I close out my IMac, I can't access my movies on my laptop???  Can anyone help me out here?  Thanks.

    I have my itunes stored on my external hard drive of my IMac.
    I have started to put my Digital Copies to my IMac with external hard drive, then on my MacBook Pro I can see the movies, but if I close out my IMac, I can't access my movies on my laptop???
    Can anyone help me out here?  Thanks.

    I have my itunes stored on my external hard drive of my IMac.
    I have started to put my Digital Copies to my IMac with external hard drive, then on my MacBook Pro I can see the movies, but if I close out my IMac, I can't access my movies on my laptop???
    Can anyone help me out here?  Thanks.

  • Transferring data from external hard drive to new replacement Macbook Pro...

    Hello,
    Apple have arranged to give me a replacement Macbook Pro due to faults with hardware on the one I am currently using. I will be going to pick up the replacement Macbook Pro tomorrow morning.
    As a complete novice I just wanted to check that I have backed up the data from my current laptop onto my Iomega external hard drive properly, as I am slightly nervous about losing all my work and not being able to transfer all my files onto my new Macbook Pro tomorrow.
    I did a back up using time machine earlier today which took quite a long time and seemed to go successfully. Is this the right thing to have done to save all data from my current laptop onto the external hard drive?
    Will transferring data from the external hard drive onto my new Macbook Pro be a simple task?
    Will I have to reinstall all my software such as Logic and Pro Tools? Also will my preferences and settings for music software be changed?
    I'd greatly appreciate any advice.
    Thanks,
    Deena

    Well it's like this.
    If your problem on the Mac didn't affect the software or the TimeMachine backup, then restoring from that using SetupAssistant (when you first set up a new Mac it will ask you to restore) should go fine.
    HOWEVER, if there are software issues on the Mac that also transferred to the TimeMachine drive, that will only transfer them back onto your new computer.
    You can't very easily just pick out the things you want to restore from TimeMachine with, it doesn't give that fine detail of control, and if it's really messed up, it might not restore anything at all.
    The golden rule of backups is to maintain two separate and easily accessible hardware copies of your data off the machine at all times.
    Since you don't know for sure if the TimeMachine restore is going to work as intended, and your only other source is going to disappear, I'd advise a additional backup of your Music, Documents, Pictures and Movie folders etc., to another regular external drive via regular drag and drop copy methods.
    The operating system and programs can all be reinstalled from fresh sources on the new machine, provided you have the AppleID and password, license codes for your programs, email passwords and any other necessary information to re-establish the license on the new machine.
    (In some cases licensed software HAS NOT transferred to a new machine with a TimeMachine restore and had to be reinstalled)
    Some times you have to contact the developer or "uninstall" the licensed program so it sends a signal to their servers that the program has been removed, else your license code may not work on the new machine.
    You might decide the new machine would be better off with a fresh install of your programs that you know are 100% compatible with Lion etc., leaving a lot of older stuff you installed over the years off the new machine, if you restore from TimeMachine, you don't have this option. You pretty much get all the crap along for the ride,
    If your new machine gets all crapped up, then restoring Lion is going to going to be a tough challenge, as you need a strong reliable Internet connection to download a fresh copy of Lion from Apple servers (no more disks). Once you do that, then somehow you have to use third party software ($$) to cherry pick your files out of TimeMachines trap. More headaches than you anticpated, and likely a charge by a specialist.
    So I'd advise another hard drive with a copy of just your files, just in case a crap-up occurs
    You can restore Lion yourself if it craps up, install programs from fresh sources as you know how to do, use the old license codes and then return your files manually exactly back into their same Music, Pictures, Documents, and Movies (etc, not Library) folders as before.
    The key to this manual method is to make sure to use the same user name as before, so all your file location data pathnames retained by program files like iTunes to where the songs are located on the drive, are matched. Once you open these programs and restablish the links in OS X, then you can move them around.
    Some tricks, if you use iPhoto, you can right click "show package contents" and inside is a folder with your Originals, copy that out and you can reimport your pictures into the new iPhoto Library on the new machine.
    So use TM if you dare, but prepared to do things manually is my opinion.
    TM restores have not been all that reliable or dependable, the more messed up your machine is, the worst the restore seems to be.
    Good Luck 

Maybe you are looking for