External Superdrive not recognized

Hi
My internal SuperDrive died like a month ago with a CD stucket on it, that cant be ejected. It is a mechanical problem. I took it to a support service store (I'm writing from Lima, Peru by the way) asking for a fix or replacement and I figured out the it was much cheaper to buy an external drive. So I bought a OWC Value Line External DVD Writer (link below).
While I was waiting for it to be delivered, I was bored of all the ugly noises that my internal drive was making so I search for a way to disable it and I found a hint (link below) suggesting to remove IODVDStorageFamily.kext file from /System/Library/Extenstions
Today I got my new external drive but it is not being recognized. I have restore the kext file on the Extensions folder, I have repaired permissions, reboot a couple of times, etc... but neither my old internal drive or the new external drive are being recognized. It is like they dosent exist.
Any suggestions>?
http://hints.macworld.com/article.php?story=20051203235221135
http://eshop.macsales.com/item/Other%20World%20Computing/VLU2SD22XLS/

Ok, backup your data*:
http://www.macmaps.com/backup.html
Dismount and disconnect any external data devices. If nothing works, just shut down and remove those devices.
Run the 10.6 installer. Boot from the CD if necessary by using the startup manager:
http://www.info.apple.com/kbnum/n106178
Then run the 10.6.4 combo installer.
Then check Apple menu -> Software Update for possible updates, but install them from http://www.apple.com/downloads/
Finally repair permissions with Hard drive -> Applications -> Utilities -> Disk Utility.

Similar Messages

  • External superdrive not recognizing an audio cd

    I have a new iMac with a new Apple external superdrive attached. The superdrive won't accept one of my brand new audio cds, but works fine with other cds. The new cd loads fine on my older 2009 iMac's internal drive. Anyone else seeing a problem like this?

    Update: I tried someone else's Superdrive on my iMac with the suspect cd and it worked fine. I will be returning my Superdrive for replacement. Thanx Amazon for a carefree return process.

  • External USB not recognized on my iMac (intel) in Disk Utility, Finder as well as in Terminal diskutil list but is listed in System Profile, which includes the location ID of 0xfa400000 / 5.  Can the location ID be used to restore USB identity ?

    My 1TB Seagate external USB not recognized by my iMac (intel) in Disk Utility, nor in Finder as well as in Terminal "diskutil list" but it is listed within the System Profile, which includes the location ID of 0xfa400000 / 5.  Can the location ID be used to restore the identity of my external USB ?

    Hello JNotorious,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/ht1151
    Have a nice day,
    Mario

  • New Toshiba 3tb external drive not recognized at startup WIn 7

    My new toshiba 3tb external drive (with wall wart power) is not recognized at start up (Win7). The message I get is that it is a USB storage device but can not be used until it is formatted (I already moved files to it). If I plug it in after start up it's fine and shows up as a toshiba storage device. I've used the 2.0 and 3.0 ports and it is the same problem (it has wall wart power). I have never encountered this problem with any other usb storage device  (an iomega 1tb and a WD 500gb) always plugged in and recognized at start up.
    Thoughts?

    Please provide your complete model number of your system.
    By doing so, we will be in a better position to provide you assistance.
    Thank you,
    -Kenna
    "Knowledge should be unrestricted and the most important commodity we can offer to help one another."

  • WD external drive not recognized with 10.7.5 update

    I've got a Western Digital external drive that was working just fine an hour ago, then I installed the 10.7.5 update and now my Mac Pro is saying that it's not recognized by the computer and asking if I want to initialize it. I went to Disk Utility and the drive itself shows up but no disc image. It's connected via a RocketU USB 3.0 dual hub, which has also worked fine and aparently still is (it's recognized in my system report). I updated my drivers for the USB 3.0 hub anyways but still no disc being recognized.
    It's not a complete disaster because this is a backup disc, but I'd love to avoid having to back up all that data again (about a terabyte, which happens to be all my work files and iTunes files - it's a LOT of stuff). I also wanted to post in case this is some kind of issue with this current update, but I digress.
    This is what my disc utility currently looks like:
    The destination and source can't be the same (as is pictured) when doing a Restore, right? That accomplishes nothing but a blank drive, I'm guessing.
    I also have Drive Genius 3 and tried to "scan" the drive several times, all of them producing failure to scan results. I could try a bench test on the drive, but as I've already stated, it was working fine an hour ago. I'm pretty sure it's the update, not the drive.
    So is there any way for me to save the information that's currently on there or do I have to bite the bullet and re-backup all that data?
    Thanks for any help here. Every time I think I know what I'm doing on the mac I get something stupid like this that I should know but don't.  :-)

    Wow, no help at all. Thanks, Apple!! Another stellar performance. That's the last time I ever install an update as it comes up.

  • External Drive not recognized anymore????

    Just hoping I can find an answer about this from the community since I'm so inexperienced with the technical stuff pertaining to my iMac.  For some odd reason, and I suppose it could just be that hard drives don't last forever, not sure, a My Book Essential External 3TB, USB 3.0 drive all of the sudden is not recognized by my iMac nor my MacBook Air.  Literally overnight it just stopped being recognized by my apple computers.  I had a whole bunch of data on it that I don't know how I'm going to replace it if I can't get an answer to this. The drives light comes on when the iMac system boots up in the morning, but it don't fire up (I think technically it's called initializing).  Any help/suggestions would be greatly appreciated.

    test with another computer even a windows computer should be able to detect it even if not mount it
    because of the filesystem not being native supported
    my wd my book ext 1TB usb2/eSATA/firewire died after 1-1/2 years after having problems spinning up a lot so I had to turn it on and off and on and off to get it to start
    toke the box apart and put the 1TB hd in another external case and there it worked so suppose WD are better at making hd's then the external enclosure

  • External monitor not recognized (X200)

    Hi,
    I have an X200 with Vista
    When I connect an external monitor (or projector) it is not recognized.  Shift-F7 results in a message that no external monitor is detected.  However, if I leave the monitor connected, put the system in standby and then resume, it recognizes the external display.
    Any thoughts to how I can get it to recognize without this work-around? Thanks

    I had the same problem.  I think it's a vista device driver issue.  Try this-
    Power down your laptop.  Plug in the external monitor.  Boot the computer - it should default to the external monitor, and Windows should recognize it.  Then, shut down normally. 
    Pull the monitor cable, boot your laptop regularly, reattach the cable, and give it a try.
    It worked for me.

  • External hd not recognized after 8.1 upgrade

    my 3 tb seagate external is not being recognized after 8.1 upgrade. plugged in bothe sides of usb ports still no response. lights up when plugged but thats about it. Please help, thanks.

    Hi
    Is there any specific error message when you plug in your external HDD?
    May I know when you upgrade OS to 8.1, this external HDD still attached?
    So before your upgrade your OS, this external HDD working fine?
    Did you try to attached your external HDD to another PC or laptop?
    did you check inside device manager whether your external HDD detected?
    may I know the details your external HDD spec and PC spec?
    Please provide as much as information that related to this issue

  • External microphone not recognized

    my external USB Samson C01U microphone worked fine under OS 10.6.4 and prior. Now, since upgrading to OS 10.6.5, when plugged in it is not recognized in sound input. Any ideas?

    OK, that's not a sustainable solution... but luckily this is:-
    http://discussions.apple.com/thread.jspa?messageID=12566760&#12569870
    Follow down, and there's a link to an Uninstaller for the Samson SoftPre, and that solves it.
    David

  • External webcam not recognized

    Hi, I bought a external DYNEX webcam (USB) and installed the latest driver from the homepage. The camera works with their software, but is NOT recognized by either ichat or skype.
    What can I do?
    Thanks
    Tony

    Hi,
    Are we talking about this one ?
    Do you have a USB 2.0 port on that PowerBook ?
    3:36 PM Saturday; March 7, 2009

  • Idvd 5-when  try  to  burn  it  says   superdrive  not  recognized

    tried to copy a handycam tape to DVD-it does everything but then just as it should burn to disc it says the superdrive is not recognized-even though i have installed software which makes it recognized on G4-it shows up in blue apple info.Any suggestions please ?
    thanks
    rick

    Hi Rick:
    Which burner did you install? You may need to go to the manufacturer's website and see if there is any firmware that you need to install.
    Sue

  • Matshita UJ-857 superdrive not recognized shown by mac????????

    My macbook was working fine yesterday and then today I put a cd in and it accepted but it didnt show on desktop. It then would not let me eject the disk.
    I checked in system profile and under ata and disc burning it now shows nothing?? Toast and itunes also can no longer detect a drive. I can hear the drive spinning when I power up. I took the laptop apart to check connections and everything seems fine.
    Ive read a lot about the superdrive 2.1 update but I got this back in July or something and had no problems and since the drive is not even shown is system I guess its not this. Anybody any ideas???
    Also i dont have applecare and am out of warranty so looking for a fix myself, do I just need to replace drive?? But why would it still spin and have power if its broken??
    I have already tried resetting the smc and pram (think thats what they were called).
    Thanks for any ideas

    I have the same problem, it only started since I installed the latest security update and version of itunes. the first problem I encountered was that software I had installed would not open due to a shared library fault with quicktime. this was resolved by installing the latest version of quicktime.
    now when I try and burn a CD it gives the message that the 'disc burner or software not found'. when I check in preferences the drive is listed under burning although it is not recognized in the system profiler.
    The CD drive loads CD's though as I am able to play a video game that needs the disc inserted. any ideas on what I should do? do I have to reboot?

  • External monitor not recognized!

    I have a Philips 180P2 external monitor hooked up to my iMac 2.8 GHz, 24", which was running fine until my upgradte to SL this afternoon. Now (among other little "quirks") the external monitor can't recognize the signal from the iMac ... or rather, the iMac won't display there...
    What's odd is that I had, for example, Safari on the external monitor and, when I start that browser, it won't show as it running on the external Philips monitor ... which isn't running (yes, power is on and cable is plugged in). When I unplug the monitor adapter from the back of the iMac it switches to one-display mode again and Safari is shown on the iMac.
    The system preferences show the monitor and its position fine ... what's going on?!
    Any and all help is REALLY appreciated. Thanks!

    I've had similar problems (see http://discussions.apple.com/thread.jspa?threadID=2132912&tstart=0) with my second monitor. When I downgrade the display of the external to 1600x1000, then the internal monitor of the imac to 1600x 1200, the display on the external is not very good. However, if I then revert the external to 1680x1050 and the internal to 1900x1200 I can get both back to what things were before updating to snow leopard. However, when I then switch off the imac for a while and then switch back on again the external switches back and forward between no display and a fleeting glimpse of the desktop.

  • External superdrive not working properly

    Hi, I have a 2012 MacBook Pro and I just recently upgraded to Yosemite. My external superdrive will play audio disks in iTunes but, when I try to burn a playlist iTunes cancels the burn with "unknown error occurred (-50)" Also I can't eject the superdrive when I go into Finder under devices. any help is appreciated thanks

    Just about any external optical drive, other than Apple's, will work. For exampe, this one recommended by Macworld:
    http://www.amazon.com/AmazonBasics-Writer-External-Optical-Drive/dp/B003M0NT1M?t ag=gmgamzn-20

  • 10.3.9 to 10.4.11 update - Superdrive not recognized

    I recently did an update from 10.3.9 to 10.4 then immediately the compilation to 10.4.11
    As my HD was starting to top out, I put in a previously burned backup DVD to review my last backup. It was recognized and read OK. I then put in a blank DVD to backup some files and received an error message. The disc was not recognized and did not spin up. Subsequently the eject key does not work, and a review of System Profiler indicates "No burning device was found". I'm stumped. Any help is appreciated.

    Hopefully it's not some basic part of the OS Missing, or the DVD part of the Player giving up.
    What does System Profiler say about the drive now?
    Might try reapplying the Combo Update...
    The combo update for PowerPC-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
    Repair Permissions afterwards, reboot.

Maybe you are looking for