Extproc causing Dr. Watson

Extproc.exe is causing a Dr. Watson error every time I attempt to access it. I have setup my tsnames.ora and listener.ora files exactly how the documentation has said.
I am running NT 4.0 server with SP6a. Oracle 8i 8.1.6. It is not specific to one particular machine either because I have tested it on 2 separate machines.
I have attempted to access the extproc_connection_data throught the test on the Net80 Assistant and by running sqlplus /@extproc_connection_data from the command prompt.
Here is a copy of my tsnames.ora and listener.ora files:
listener.ora:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oradbms)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(PROGRAM = extproc)
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\Oracle\Ora81)
tsnames.ora:
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(Key = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = R0)
Any help is greatly appreciated. This appears to be a bug in the extproc but in all of the discussions I have yet to see another with the same problem.
Thanks,
Jeff
null

I have received the same error on the 8.1.6 install. Also running NT 4.0 SP6a. I am running a canned install - nothing special with the exception of upgrading from 8.1.5 to .6
I'll re-post if I find out what the problem.
Regards, Chris

Similar Messages

Closing runtime causes dr.watson (only LV6.0.x)

When I run my application (LV 6.0.2) on a Win NT system and close the application window, I get a Dr.Watson Error. Stopping the Application without closing the window causes no error. The error occures only in communication with my CAN-Interface. LabView 5.1.1 causes no error.

Helo:
The CAN-driver I use, is no NI-driver.
Yes, the application is a stand-alone exe generated by LV. I have no LV on the System, only the application (because of disk space).
Dr.Watson describes (in German):
"Zugriffsverletzung (0x00000005), Adresse: 0x037bae6c
Attachments:
Drwtsn32.log ‏345 KB

MediaSource 5 Organizer cr

Hello. I'm having a problem with MediaSource 5.0.38 Organizer.
MS5 Player opens and runs just fine, except when I try to open OGGs. I haven't tested this too much, but when I tried to open a Wiktionary pronunciation OGG (the one for "hat" specifically, chosen at random), the player started up, started asking about file type associations, said "hat", and then promptly crashed. I didn't check the error specs for that, because it only happened once. I tried opening an MP3 from another website and it played fine without crashing.
Organizer, on the other hand, starts up (regardless of whether it's through the Start Menu, opening an Internet file through Firefox, etc.), displays the Sources and Now Playing fields (the latter usually contains another Wiktionary OGG for "assuage" which I played before the crashes started), starts the file type association bit, and promptly crashes with a Windows XP "program has encountered an error and needs to close"-type error with these specs:
AppName: ctcmsu.exe
AppVer: 5.2.3.0
ModName: ctpcmlu.ecd
Modver:5.2.4.0
Offset: 000e5bc
Sometimes, the crash is so nasty that it also causes Dr. Watson Postmortem Debugger to crash. This doesn't seem to happen every time, but it happens enough. After the crash, Organizer remains open but frozen until I right-click it on the Taskbar and select close, at which point I am informed that it's not responding and have to click End Task before it closes.
I've updated my sound driver, thought I uninstalled all Creative software (apparently not since "assuage" was still in Now Playing, so I don't know what I missed) and reinstalled, and it still crashes.
After the Player crashed with "hat" I figured I'd try a different file-type. I opened an MP3 from the Internet with Player, and as I said it worked fine. Then I switched to Organizer view and it crashed in the same spot.
Is this something to do with my Library? Other threads lead me to believe it could be, but I don't know how to edit my library besides through Organizer.
I'm using a NOMAD Jukebox Zen Xtra, and have the appropriate driver (ZEN and NOMAD Jukebox Plugin 5.00.22 for Creative MediaSource 5 Player & Organizer) from Creative.com installed. It crashes regardless of whether the player is plugged in. I'm on Windows XP SP2.
Any help would be greatly appreciated!

The same bug!
Yesterday I've uninstalled all Creative software with registry cleaning and complete file deleting to solve this problem.
I've installed latest version of drivers. MS5 (only skins and player was selected). Than NEO 6 + from original disk THX Console and Ent/Game/Audio consoles.
Organizer successfully imported my entire collection with mp3's and ogg's. Organizer worked fine for 5 hours and than crashed with error Offset: 000e5bc in ModName: ctpcmlu.ecd.
Now Organizer plays music, generates and plays Smart Playlist, but every attempt to access PC Music Library by clicking on it in the tree leads to error with Offset: 000e5bc in ModName: ctpcmlu.ecd.
I've manually deleted PC Music Library files in Doc_Set_User. No use. Crash during entire collection import. Even tried it with only one MP3 file. Successfully imported, but Organizer crashes every time when I click PC Music Library. So I think I need reinstall all Creative software once again.
Is there any solution?

WebLogic 5.1 failing on Windows NT 4 SP6

We have a customer that has implemented the Financial Fusion Server in WebLogic 5.1 running on Windows NT 4 Server Service Pack 6. They have indicated the server is failing daily with an Access Violation occurring in java.exe. The Dr Watson log is showing the following exception: Exception number: c0000005 (access violation). I wonder if anyone else has experienced anything similar.

While this may be true, the latest certified Sun 1.2.2 JVM causes
Dr Watsons
specifically during jsp compiles. Precompile when possible.
Another brand JVM (IBM) does not Dr Watson and it is not certified
by BEA.
So,
"Michael Girdley" <[email protected]> wrote:
>
>
Dr. Watsons are typically bugs in the JVM. You should
make sure that your
client is on the latest and certified JVM:
The platform support page for WebLogic Server is located
at:
http://www.weblogic.com/platforms/index.html
This page has the latest and greatest information on the
platforms that
WebLogic is certified and supported on.
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"Beth Butler" <[email protected]> wrote in message
news:[email protected]..
We have a customer that has implemented the FinancialFusion Server in
WebLogic 5.1 running on Windows NT 4 Server Service Pack
6. They have
indicated the server is failing daily with an Access Violation
occurring in
java.exe. The Dr Watson log is showing the following exception:
Exception
number: c0000005 (access violation). I wonder if anyone
else has experienced
anything similar.

Need assistance please_Indesign CS_update

I have indesign cs...that all of a sudden after a reboot it is causing dr.watson errors and will not start.
I had to re-activate photoshop for it to restart, but that is now fine.
any ideas as to what can be done? besides re-installing.
//=====================================================
Exception code: C0000005 ACCESS_VIOLATION
Fault address: 4F020F0E 01:0000FF0E C:\Program Files\Adobe\Adobe InDesign CS\ObjectModel.dll
Registers:
EAX:0132CC68
EBX:00000000
ECX:0132CC50
EDX:012FCDE8
ESI:0132CC68
EDI:4E970880
CS:EIP:001B:4F020F0E
SS:ESP:0023:0012FC4C EBP:0132CC50
DS:0023 ES:0023 FS:003B GS:0000
Flags:00250202
Call stack:
Address Frame Logical addr Module
4F020F0E 0132CC50 0001:0000FF0E C:\Program Files\Adobe\Adobe InDesign CS\ObjectModel.dll
Message was edited by: but_why

Have you tried a system restore?
Dr Watson...wow, that goes way back.
What operating system?

Report service doesn't start after installing 9iAS

Forms are fine after installing 9iAS, but report server doesn't
start, and is not listed in Control Panel, Services.
If I try start it as RWMTS60.exe -install oracledev2 tcpip I got
the error "Please consult the installation guides for how to set
up and run this program", if I start it as RWMTS60.exe -listen
oracledev2 I got the error "Rep 0001:Unable to find the report
builder message file. Please verify your installation". Attempt
to run any Reports product (Runtime, for instance) causes
Dr.Watson on RWRUN60.exe. The registry parameter RW60 points to
the ORACLE_HOME/report60 for the Reports Server that is failing.
What do I do to start Reports ?
Thank you,
Kate

Hi,
1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
cd %ORACLE_HOME%\bin
emctl stop dbconsole
2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
Change line from:
tracelevel.main=WARN
To
tracelevel.main=DEBUG
Decomment this line, so that the line becomes :
EMAGENT_PERL_TRACE_LEVEL=DEBUG
3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
Change line from:
log4j.rootCategory=WARN, emlogAppender, emtrcAppender
To
log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
5. Start the dbconsole and upload the output of each command
- start the dbconsole: "emctl start dbconsole"
- issue "emctl clearstate"
- status the dbconsole: "emctl status dbconsole"
- check the status of the agent until it comes up: "emctl status agent"
- force an upload: emctl upload
6. Check If you are able to view the dbconsole Page & login
check below logs may be you can see the close error messages to solve the issue.
<ORACLE_HOME>/<hostname_sid>/sysman/log directory
<ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
Thanks.

Ifweb60.exe takes all CPU on webserver-Forms Prod. mgmt

I have 3 tier setup. Database 81741 on windows2000 SP3. Webserver on windows2000 SP2 using forms6i patch 11(6.0.8.20.1). Clients using IE5.05/IE6 to access database. Sometimes, a user hangs the process and kills his session from his PC, even reboots client. The process is still there on webserver and goes on taking more CPU and more memory till it cloggs the webserver. It has taken almost 100%CPU. How can we eliminate this process without rebooting the webserver.
I tried killing the session from the database end, it is still there on webserver. The user says he waited for 2 mins to respond the application and then killed using ctrl-alt-del. Is there a way to kill the session on the webserver. When we try killing using Task Manager, it says 'access denied' and wouldn't let us kill. Even, tried with FORMS60_TIMEOUT. IN normal situation, this worked but in this case where a application hanged & user killed, FORMS60_TIMEOUT even didn't kill the process ifweb60.exe.
Someone has a idea how to prevent from rebooting webserver again and again...other than to check all 100 forms for any infinite loops and fix that.
Thanks a lot.

I believe this is a known bug.
As a work-around you could try to add FORMS60_CATCHTERM=0 to the registry.
This probably will cause Dr. Watson on the webserver box, but should kill the process.
Slava.
I have 3 tier setup. Database 81741 on windows2000 SP3. Webserver on windows2000 SP2 using forms6i patch 11(6.0.8.20.1). Clients using IE5.05/IE6 to access database. Sometimes, a user hangs the process and kills his session from his PC, even reboots client. The process is still there on webserver and goes on taking more CPU and more memory till it cloggs the webserver. It has taken almost 100%CPU. How can we eliminate this process without rebooting the webserver.
I tried killing the session from the database end, it is still there on webserver. The user says he waited for 2 mins to respond the application and then killed using ctrl-alt-del. Is there a way to kill the session on the webserver. When we try killing using Task Manager, it says 'access denied' and wouldn't let us kill. Even, tried with FORMS60_TIMEOUT. IN normal situation, this worked but in this case where a application hanged & user killed, FORMS60_TIMEOUT even didn't kill the process ifweb60.exe.
Someone has a idea how to prevent from rebooting webserver again and again...other than to check all 100 forms for any infinite loops and fix that.
Thanks a lot.

How finalize program works

My question is how to make this finalize method to return "garbage collected" since the 3 object below is eligible for garbage collection.
Did i overriden the finalize method incorrectly or my code problem.
Kindly assist...
     public class Test {
     protected void finalize() throws Throwable
     {         System.out.println("Garbage collected");
     super.finalize();}
public static void main (String args[])
     {   for (int i = 0 ;i < 100000 ;i++)
     Test a = new Test();
     Object o =new Object();
     Object oa[] = new Object[1];
     o = null;
     oa = null;
     a = null;
     return ;
     }      }

You are right , i never think about my OS memory issue .....Tq for your perfect answer ,but anyway it is very difficult to make finalize work using my own coding cause "DR watson " Error will prompt me first before the code run if try to do force allocate of all the memory resources.
Anyway how about this question.
Question : Which line is the eligible for garbage collection.
1.public class Test
2.{       public static void main (String args[])
3.     {
4.     String s1 = "One";
5.     String s2 = "Two";
6.     s2+=s1;
7.     s1=null;
8.     s1=s2;
9.     System.out.println(s1);
10.     }
11.}
A.Before line 7
B.Before line 8
C.Before line 9
D.Before line 10
E.Before line 5

Can I get a native dump (Dr. Watson) when JNI code causes an exception?

Is there a way to get the JVM to just not trap an exception, so that we can get a native dump? I have tried -XX:OnError="drwtsn32 -p %p". This did produce a Dr. Watson dump, but not a good one. I placed a deliberate error in the code, and called it outside of java, and got a good log file (with the fault in my DLL), but the same module called via JNI gave me a bad log file, with the fault point in ntdll.dll.
This is happening in java 1.4.2. In the field, the jvm is provided by IBM Websphere 6 on Windows 2000. I'm unable to duplicate the error, but am running the above mentioned tests in my Eclipse 3.1 + Weblogic 8.1development environment on Win XP.

Queer!
This is not an error message I see when I try to execute a program not in my path!
And when I do not specify libraries to be linked, I get a linking error!
This seems to be a preprocessor error.
What could it possibly be?
Do you have the correct calling convention in the case of #ifdef __cplusplus ??
I guess that should have been already done by your javah.
I wonder.
I also wonder if cl.exe actually stands for "command line" exe
Can you pls send me all the files at [email protected] ??
cheers

Dr watson error on WINNT Please help.

Platform : NT4.0 with SP6 installed
JDK: 1.2.2
DB: Oracle
When I try to perform a some operations on running weblogic server I
will get Dr watson error saying accessviolation. This problem occurs
when I make high processor intesive calls or repeat smaller resource
consuming calls for 4 to5 times continuously.
Can any body tell me is there any knownproblems with the environment
which I am running in. Also kindly reply to my email id
regards
suresh

For the record, the JAVACLASSPATH should only contain the boot classes (and the JDK
classes for 1.1 JVMs). Everything else, including weblogicaux.jar, should be in the
WEBLOGICCLASSPATH.
nsuresh wrote:
Hello guys,
Finally we could get it working. Problem was in the entries of
WEEBLOGICCLASSPATH amd JAVACLASSPATH. JAVACLASSPATH should have only
bootclass and weblaugicaux.jar and rest of it should be in weblogic
class path ( or other way round) and you should not mix different
things. strange solution but we got it working.
bye and thanks for all the help.
bye
suresh
Venkatesh Iyer wrote:
Suresh
Are there any messages in the weblogic.log.
To isolate the JDBC related errors, set the trace on for JDBC.log in your properties
file and execute your tests. There is a chance there you may find something useful
in your jdbc.log file.
Venkatesh
Joseph Weinstein wrote:
nsuresh wrote:
Unfortunately Even I am not able to get any further information. There is
not JNI involved in my code. We are ussing Type3 driver with Oracle. Just
the problem is when we try to run some moderately high performing call we
get Dr watrson error.
regards
sureshOracle doesn't make a type-3 driver, only a type-4 and a type-2. The type-4
(thin) driver is all Java. The type-2 driver does use native code, in the Oracle
OCI library.
Joe
Rob Woollen wrote:
It's impossible to tell from the information that you've given.
Dr. Watson's are caused by errors in native code not java.
What JDBC driver are you using?
Are you using JNI or any of your own native code?
-- Rob
nsuresh wrote:
Platform : NT4.0 with SP6 installed
JDK: 1.2.2
DB: Oracle
When I try to perform a some operations on running weblogic server I
will get Dr watson error saying accessviolation. This problem occurs
when I make high processor intesive calls or repeat smaller resource
consuming calls for 4 to5 times continuously.
Can any body tell me is there any knownproblems with the environment
which I am running in. Also kindly reply to my email id
regards
suresh
PS: Folks: BEA WebLogic is in S.F., and now has some entry-level positions for
people who want to work with Java and E-Commerce infrastructure products. Send
resumes to [email protected]
The Weblogic Application Server from BEA
JavaWorld Editor's Choice Award: Best Web Application Server
Java Developer's Journal Editor's Choice Award: Best Web Application Server
Crossroads A-List Award: Rapid Application Development Tools for Java
Intelligent Enterprise RealWare: Best Application Using a Component Architecture
http://weblogic.beasys.com/press/awards/index.htm

Event 4999 - Watson report about to be sent for process id: 27244 on Mailbox Server every five minutes

On one of my DAG enabled Exchange 2013 mailbox servers, I get this error in event viewer every five minutes:
Log Name: Application
Source: MSExchange Common
Date: 6/25/2014 10:49:46 AM
Event ID: 4999
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: mailboxserver
Description:
Watson report about to be sent for process id: 27244, with parameters: E12IIS, c-RTL-AMD64, 15.00.0913.022, M.E.RpcClientAccess.Service, unknown, M.E.R.S.U.DatabaseInfo..ctor, System.NullReferenceException, aba8, unknown.
ErrorReportingEnabled: True
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange Common" />
<EventID Qualifiers="16388">4999</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-25T17:49:46.000000000Z" />
<EventRecordID>687360</EventRecordID>
<Channel>Application</Channel>
<Computer>mailboxserver</Computer>
<Security />
</System>
<EventData>
<Data>27244</Data>
<Data>E12IIS</Data>
<Data>c-RTL-AMD64</Data>
<Data>15.00.0913.022</Data>
<Data>M.E.RpcClientAccess.Service</Data>
<Data>unknown</Data>
<Data>M.E.R.S.U.DatabaseInfo..ctor</Data>
<Data>System.NullReferenceException</Data>
<Data>aba8</Data>
<Data>unknown</Data>
<Data>True</Data>
<Data>False</Data>
<Data>Microsoft.Exchange.RpcClientAccess.Service</Data>
<Data>
</Data>
</EventData>
</Event>
Everything is working ok, but I'm concerning that I"m seeing this.
ST

Amit,
I don't see the same type of 4999 error every five minutes anymore. It only get the 4999 error about 3 times a day. I get one with the same ID and other completely different process ID. The error is below:
Log Name: Application
Source: MSExchange Common
Date: 7/2/2014 6:01:36 AM
Event ID: 4999
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: computer
Description:
Watson report about to be sent for process id: 13152, with parameters: E12, c-RTL-AMD64, 15.00.0913.022, w3wp#MSExchangeOWAAppPool, M.E.Data.ApplicationLogic, M.E.D.S.GccUtils.GetClientIPEndpointsFromHttpRequest, System.NullReferenceException, 868, 15.00.0913.017.
ErrorReportingEnabled: True
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange Common" />
<EventID Qualifiers="16388">4999</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-07-02T13:01:36.000000000Z" />
<EventRecordID>825358</EventRecordID>
<Channel>Application</Channel>
<Computer>computer</Computer>
<Security />
</System>
<EventData>
<Data>13152</Data>
<Data>E12</Data>
<Data>c-RTL-AMD64</Data>
<Data>15.00.0913.022</Data>
<Data>w3wp#MSExchangeOWAAppPool</Data>
<Data>M.E.Data.ApplicationLogic</Data>
<Data>M.E.D.S.GccUtils.GetClientIPEndpointsFromHttpRequest</Data>
<Data>System.NullReferenceException</Data>
<Data>868</Data>
<Data>15.00.0913.017</Data>
<Data>True</Data>
<Data>False</Data>
<Data>w3wp#MSExchangeOWAAppPool</Data>
<Data>
</Data>
</EventData>
</Event>
Going to keep an eye on it, but its not causing any issues.
ST

Dr. Watson error trying to generate report

I am running Sun Java System Web Server 6.1 SP5 on Windows Server 2003 with SP1 which has been locked down using the Bastion Host server role from the Windows Server 2003 Security Guide. When I try to generate a report on the web site statistics through the Server Manager (web admin console) I get the pop-up screen which says:
Starting analysis
Attempting to run:
D:/Sun/WEBSER~1/WEBSER~1.1/extras/flexanlg/flexanlg -F -n acol-prod2.acol.ca -i D:/Sun/WEBSER~1/WEBSER~1.1/HTTPS-~2/logs/access -o c:\stat.txt -c hnrfeuok -t s5m5h10 -l c+5h5 -p ctl
This may take a bit.
But the report does not get generated and I get the following error in the Event Viewer Application Log:
Event Type:     Information
Event Source:     DrWatson
Event Category:     None
Event ID:     4097
Date:          2/20/2006
Time:          9:17:06 AM
User:          N/A
Computer:     WEB100
Description:
The application, D:\Sun\WebServer\WebServer6.1\bin\https\httpadmin\bin\lganalyz.exe, generated an application error The error occurred on 02/20/2006 @ 09:17:06.313 The exception generated was c0000005 at address 77BD03BA (msvcrt!popen).
I thought this might be a permissions problem, so I tried running the Administrator Server service as the local admin account instead of Local System Account. I get the same result either way.
Any ideas on what might be causing the problem?
Thanks,
Chris

Just a little further info. I installed Windows 2003 with SP1 and the latest updates available through Windows Updates and Sun Java System Web Server SP5 on a new server. I did not do any of the security configuration lockdown as I had done on the other server. I am still getting the Dr. Watson error when trying to generate a report, but I am also getting the following error:
Event Type:     Error
Event Source:     Application Error
Event Category:     (100)
Event ID:     1000
Date:          2/23/2006
Time:          1:42:16 PM
User:          N/A
Computer:     WEB100-TEST
Description:
Faulting application lganalyz.exe, version 0.0.0.0, faulting module msvcrt.dll, version 7.0.3790.1830, fault address 0x000303ba.
Hope this helps!
~Chris

Why does labview generate Dr. Watson error "C0000005 access violation"

I am running Labview 5.1.1 in Windows 2000 Professional on a machine with the following configuration
*----> System Information <----*
Computer Name: ANDANTE
User Name: Administrator
Number of Processors: 2
Processor Type: x86 Family 6 Model 8 Stepping 3
Windows 2000 Version: 5.0
Current Build: 2195
Service Pack: 4
Current Type: Multiprocessor Free
I have all of a sudden begun to experience labview crashes. The crash occurs systematically after tens of minutes; not just a few minutes, but not more than an hour or so. I am running a vi but not actively interacting with the machine (no other applications running, not even moving the mouse around). The problem happens even when running a vi that I have run successfully for extended periods of time (overnight) only 3 months ago. I have tried it with two different vis, one that I have recently made a lot of modifications to and another that has not been touched for months (since before the crashes began), and it happens with both vis. They do much different things (communicate with different GPIB or PCI boards, write to different kinds of files in different locations, etc.), so the problem seems to be vi-independent.
When the crash occurs, I see a dialog appear with the error
labview.exe has generated errors and will be closed by windows. You will need to restart the program. An error log has been created.
The Dr. Watson error log is generated and the error is
Application exception occurred:
App: (pid=1160)
When: 4/25/2004 @ 01:57:56.640
Exception number: c0000005 (access violation)
I always get the same Dr. Watson error information -- i.e., it is very reproducible. I don't really know how to interpret the rest of the Dr. Watson log, but I include the report on the first thread, which is the one with the "FAULT" in it, at the end of this email.
Looking around on the web, it may be that a temporary virus infection could have created the problem. In the period since the machines was last successfully used, I have seen two files be infected by the W32.Welchia.B.Worm virus, the files were svchost.exe and WksPatch[1].exe. These files have been quarantined and no other infected files have been found since this error began to appear.
Any ideas? I've seen on the web that reinstalling Windows 2000 and/or upgrading to Labview 7.0 might solve the problem, but it would be nice to get some confirmation before taking the time/spending the money.
Here is the state dump for the thread with the FAULT in it, as provided by Dr. Watson:
State Dump for Thread Id 0x574
eax=00000062 ebx=00000000 ecx=00000000 edx=00000004 esi=00000000 edi=05692214
eip=00748236 esp=0012fb28 ebp=0012fb28 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000 efl=00000246
function: StrLen
00748230 55 push ebp
00748231 8bec mov ebp,esp
00748233 8b4d08 mov ecx,[ebp+0x8] ss:00ba9a0e=????????
FAULT ->00748236 8a11 mov dl,[ecx] ds:00000000=??
00748238 8d4101 lea eax,[ecx+0x1] ds:00a79ee6=????????
0074823b 84d2 test dl,dl
0074823d 7407 jz GetCDReg+0x6f6 (00750c46)
0074823f 8a10 mov dl,[eax] ds:00000062=??
00748241 40 inc eax
00748242 84d2 test dl,dl
00748244 75f9 jnz CfgRemove+0x44f (0074ae3f)
00748246 2bc1 sub eax,ecx
00748248 48 dec eax
00748249 5d pop ebp
0074824a c3 ret
*----> Stack Back Trace <----*
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0012FB28 00737A74 00000000 00000000 05692214 00000400 !StrLen
0012FC40 00736A45 050753E4 05692214 0012FC6C 00736724 !SetKeyboardHandlerProc
0012FC50 00736724 05692214 0012FCB4 05692214 BDBC0000 !SetKeyboardHandlerProc
0012FC6C 00736627 05692214 0569232C 00000400 00000000 !SetKeyboardHandlerProc
0012FC98 0074B470 0012FCB4 BDBD0001 00000000 0569E8E0 !SetKeyboardHandlerProc
0012FCD0 0074ACD0 00000000 0074AC10 0569FFA4 010A2418 !CfgRemove
0012FCE8 007808D5 00000000 00000000 00000001 00000000 !CfgRemove
0012FD08 007ACEB6 00000000 00000000 77E18F95 00000000 !ChkOccurrences
0012FD9C 006033DE 00000001 00000000 77E2ADC1 007A5C80 !WMainLoop
0012FF24 007B2186 00400000 00000000 00000001 00000001 !WMain
0012FFC0 7C581AF6 005C0057 0061006C 7FFDF000 C0000005 !inp
0012FFF0 00000000 007B2030 00000000 000000C8 00000100 kernel32!OpenEventA
*----> Raw Stack Dump <----*
0012fb28 40 fc 12 00 74 7a 73 00 - 00 00 00 00 00 00 00 00 @...tzs.........
0012fb38 14 22 69 05 00 04 00 00 - 16 4d 65 74 68 6f 64 20 ."i......Method
0012fb48 4e 6f 74 20 49 6d 70 6c - 65 6d 65 6e 74 65 64 00 Not Implemented.
0012fb58 55 1f f8 77 18 25 f8 77 - 2f a8 fd 74 c4 01 00 00 U..w.%.w/..t....
0012fb68 05 a5 fd 74 d0 26 ce 01 - 00 00 06 01 10 04 00 00 ...t.&..........
0012fb78 00 00 00 00 00 00 00 00 - 2e fb 69 05 42 e9 69 05 ..........i.B.i.
0012fb88 c1 2f 7b 00 00 00 00 00 - 12 04 00 00 11 04 00 00 ./{.............
0012fb98 30 fb 69 05 12 04 12 00 - bb 35 7b 00 00 00 06 01 0.i......5{.....
0012fba8 11 04 00 00 00 00 00 00 - 00 00 00 00 2e fb 69 05 ..............i.
0012fbb8 35 34 7b 00 4c 34 7b 00 - 48 00 06 01 f8 fb 12 00 54{.L4{.H.......
0012fbc8 10 04 00 00 ec 53 07 05 - 11 04 00 00 08 fc 00 00 .....S..........
0012fbd8 ee c8 77 00 30 fb 69 05 - 11 04 00 00 00 00 00 00 ..w.0.i.........
0012fbe8 00 04 00 00 01 00 00 00 - ec 53 07 05 00 04 00 00 .........S......
0012fbf8 00 38 83 00 1c fc 12 00 - 23 ca 77 00 00 38 83 00 .8......#.w..8..
0012fc08 40 ff 69 05 01 00 00 00 - 00 00 00 00 2d 00 00 00 @.i.........-...
0012fc18 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0012fc28 00 00 00 00 00 00 00 00 - 00 00 00 00 01 00 00 00 ................
0012fc38 50 fc 12 00 1a 6a 73 00 - 50 fc 12 00 45 6a 73 00 P....js.P...Ejs.
0012fc48 e4 53 07 05 14 22 69 05 - 6c fc 12 00 24 67 73 00 .S..."i.l...$gs.
0012fc58 14 22 69 05 b4 fc 12 00 - 14 22 69 05 00 00 bc bd ."i......"i.....

For questions like these, you are better off contacting NI directly. Goto www.ni.com/ask for directions. It has been my experience that Dr. Watson error logs are only useful as supplementary information. It is best for support and for the forum if you can provide a clear description on how to cause the error consistently.

What causes NIDSTerminateApp call in LabVIEW application?

I have an application which periodically crashes with an exception c0000005 error. It is running on 2 different machines and has occurred on both machines (Windows 2000).
The Dr Watson log file shows very little information about the thread that crashes (it seems that it is pretty seriously trashed) but the back trace includes a call to NIDSTerminateApp. This is exported by nids.dll (the DataSocket library) so it leads me to think the problem may be there. However, I don't know if this is a response to an earlier problem (hence "terminate") or the cause of the problem.
I will include the log file below.
Ciao
Bill
Attachments:
HeatTreat_Crash-drwtsn32.log ‏53 KB

Bill,
The first thing I would try and get a handle on is whether the program is crashing on a common operation each time. Since the time elapsed between crashes varies so greatly, it doesn't really help in the process of narrowing things down. In this case, I would try and implement a log file for your program. Basically, place file write operations at various points in your program. They will serve as "checkpoints". When the program crashes, open the file and see what the last checkpoint that was passed. You will then be able to zoom in on the offending code if it is in fact the same piece of code causing the problem each run.
The drwtsn32.log file is an appended file, therefore the latest event is at the end of the file. Within Notepad, Scroll to
the bottom and search up for 'Application' . Somewhere beneath 'Application' is PID (process ID) this value is the process that was running when the Error was generated. Scroll down to check the list of processes and locate that number. In your file, this process is HeatTreatMain.e.exe.
Look for 'FAULT ->' and this is the place within the processes where the application error occurred. The new section shows the stack, however the function names are usually NOT correctly identified by the Dr. Watson.
In the vast majority of cases the drwtsn32.log file does not contain sufficient information in order to debug the failure. It only gives you an idea about the failure. It is the user.dmp file that might lead to a solution. The utility only creates the Dr. Watson log file (drwtsn32.log). You have to instruct the Dr. Watson to create the crash dump (user.dmp). Launch the utility by typing drwtsn32 in the Start»Run. You are going to get a new window similar to the one attached below.
Refer to the linked document for more information.
How Do I Debug a Non-Reproducible Crash?
Zvezdana S.
Attachments:
dr_watson.gif ‏10 KB

How to localize cause of GPF at RunUserInterface (unknown position)

Hallo,
I'm facing the random GPF pointed to the RunUserInterface thread at unknown position; unfortunately the condition of the crash is really random (sometime suddenly after the initialization the application, sometimes after quite log run, sometimes after mouse cursor pointing to tooltip, ...).
The developed application (under CVI 2012 SP1 as 32-bit app for Win) is quite complex user interface to distributed control system using external dll library as the data layer. This library is running it's own threads and I'm using the multithreading library TSQ concept to get data from data layer.
Have anyone some hints to reveal the cause?
I've digged this, this, and this - but not have no success to follow the hints. After the crash (release mode) there isn't obvious "crash dump" Windows dialog. Iinstead of this a dialog box to start the (CVI) debugger appears - but it leads again in the blind way. After start of the CVI, there is message no debugging information (?), "unknown position at thread id XYZ ..." (note the XYZ corresponds the main thread id again).
Thanks for any help!
George

Hello,
thanks Roberto for your concern!
Unfortunately there isn'n any explicit and direct relation to the gui operation (there involve duplicating of tab panels with tooltip enabled, creating the panels from hidden template - again with the tooltips etc.)
But! If I'm not on wrong path, there are circumstances indicating a problem in toolbox library - see the attached picture (I'v gained a little progress in collaboration with WinDbg and Dr. Watson ... ). On the left is WinDbg interpretation of crash dump, on the right is the map file content.
Thread list sems to be correct, I'v found ThreadsId of some used threads, the 000:1244 belongs to mainTheadId.
The call stack probably shows activity of tool tip function:
cvirte!clock + 0x9F3
cvirte!clock + 0x60A
cvirte!SetIdleEventRate + 0x7A3
cvirte!SetIdleEventRate + 0x23F
Siimon + 0x27204
Siimon + 0x1A780
I'm a little confused discrepancy with the table of symbols (map file) - the offsets of function doesn't perfect match. Could someone knowledgeable shed light on this, please?
Or is it just a coincidence and I have nothing to do with tooltip and I'm facing problems with overwriting memory or something similar?
Thank for any expert voice!
George
Attachments:
RunUserInterface_DrWatson_dump.png ‏80 KB

Extproc causing Dr. Watson

Similar Messages

Maybe you are looking for