EXTPROC_CONNECTION_DATA missing Oracle11GR2 on Windows

Hello Oracle Guru's,
I just installed Oracle 11.2.0.1.0 (64-bit) on Windows Server 2003 (64-bit) and noticed that the EXTPROC_CONNECTION_DATA Service Name in the TNSNAMES.ORA file is missing; replaced with ORACLR_CONNECTION_DATA. We have our own spatial type which relies on the Service Name being called EXTPROC_CONNECTION_DATA. Was this service name purposely removed at 11GR2 or was this just an oversight?
Thanks,
-Shawn
Edited by: user2130467 on Jun 22, 2010 11:07 AM

Yes, I had to add it manually to get the extproc working, but I need to know if this was intentionally removed or was it a mistake. Some of our customers have already contacted our Support Services asking why our spatial type is not working when they configure the LISTENER using the ORACLR_CONNECTION_DATA service name. Our documentation states that the service name has to be called EXTPROC_CONNECTION_DATA - but it is no longer there.
http://webhelp.esri.com/arcgisdesktop/9.3/index.cfm?id=2829&pid=2818&topicname=Configuring_Oracle_Net_Services_to_use_ST_Geometry_SQL_functions
-Shawn
Edited by: user2130467 on Jun 22, 2010 1:02 PM
Edited by: user2130467 on Jun 22, 2010 2:43 PM

Similar Messages

Your system is missing a critical Windows security patch (MS12-020) required to gain access to this system

Hi,
I am trying to install VPN Client from my client site. While installing i am facing the below error.
Your system is missing a critical Windows security patch (MS12-020) required to gain access to this system. Use the link below for more information on installation, or open Windows Update and install all available critical updates. When you're finished updating
your system, log out and try again. If you're still having problems, contact your system administrator.
http://support.microsoft.com/kb/2621440
I went through all the related sites but still i did not find any solution. Under Windows installed updates i could see the security update for Microsoft windows (KB2621440). If its already exist why it is not taking this security patch?
Kindly guide.
Best Regards,
Yadav Kankanwadi

Hi,
Based on Microsoft Security Bulletin MS12-020, this security update resolves two privately reported vulnerabilities:
KB2621440 and KB2667402.
http://technet.microsoft.com/en-US/security/bulletin/ms12-020
Thanks!
Andy Altmann
TechNet Community Support

HT204318 Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point.

Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how can i properly sync my iTunes from my Mac to my PC? using iTunes

Moving a library: Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its sub-folders and files) intact to the other drive. Hold down the option (alt) key (shift on Windows) and open iTunes. At the prompt to create or choose a library choose the copied iTunes folder.

HT204318 Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how

Copied my iTunes from my Mac to my Windows 7 laptop, now there are thousands of songs missing on the Windows copy with the exclamation point. everything shows up, playlists and tracks, there are just a bunch of songs with exclamation points. how can i properly sync my iTunes from my Mac to my PC? using iTunes

nope all my songs are copied and organized into the iTunes library.

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

My libraries panel is missing from the window dropdown. Where else can I access it? Is that normal?

My libraries panel is missing from the window dropdown. Where else can I access it? Is that normal?

Lisa,
You may try the list (or go straight to 6) if you have updated to Yosemite without reinstalling).
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Policies missing in SCM Windows 8.1 Security Compliance Baseline v1.0

Hello,
I have installed SCM 3.0.60 (downloaded from this link:
Microsoft Security Compliance Manager) on a Windows 8.1 Virtual Machine. Because I could not connect my VM to internet at the moment, I imported the Windows 8.1 Security Compliance Baseline (downloaded from this link
SCM Baselines for Windows 8.1, IE 11 and Server 2012 R2 are now live!) and the baseline attachment in SCM. The import process ran well and I then created a custom baseline based on the Win8.1 Computer Security Compliance 1.0 baseline (using the Duplicate
action in SCM). During my customization I have noticed that some policies were missing from my custom baseline. After verifying the original baseline I have noticed that the policies were missing in it also. I connected my VM to the internet and clicked on
the Download Microsoft baselines automatically action in SCM. SCM downloaded additional baselines (Office 2013, SQL Server 2012,...). I was expecting the Win8.1 baseline to be updated but it was not. The policies are still missing and I cannot complete my
customization. For information the missing policies that I've noticed are the following:
Under Computer Configuration\Administrative Templates\Windows Components\File Explorer
All policies are missing except "Configure Windows SmartScreen" and "Turn off Data Execution Prevention for Explorer"
Under Computer Configuration\Administrative Templates\Windows Components\Sync
your settings theses polices are missing:
--> Do not sync
--> Do not sync app settings
--> Do not sync browser settings
--> Do not sync desktop personalization
--> Do not sync on metered connections
--> Do not sync other Windows Settings
--> Do not sync passwords
--> Do not sync personalize
Under Computer Configuration\Administrative Templates\System\KDC these policies are missing
--> KDC support for claims, compound authentication and Kerberos armoring
--> User forest search order
--> Warning for large Kerberos tickets
--> Provide information about previous logons to client computer
It seems that theses policies are not present in the Package.XML file that is included in the Windows-8.1-Security-Compliance-Baseline.cab.
Does anyone ever experience the same issue?
Anyone know if there is an updated version of the Windows 8.1 Security Compliance Baseline ? (the version downloaded from the link i supplied above is v1.0)
Regards,
François

Hi,
in this blog, it is just related to Internet Explorer, not the lock screen camera, it can be found at the GPO.
Regards
Wade Liu
TechNet Community Support

Hp mini could not start because the following file is missing or corrupt /windows/system32/hal.dll.

windows could not start because the following file is missing or corrupt <Windows root>\system32\hal.dll.
then it says please re-install a copy of the above file

Any system or sys32 and any .dll files missing or corrupted errors, usually the only fix is to reinstall windows and anything on hard drive not saved on removable drives...flash, usb, cd or floppy is lost. I've had several sys32.dll file missing or corrupted errors and asked at Best Buy Geek Squad what the fix would cost and that's how I learned the only fix is installing windows.

Mark/Space releases version 4 of the Missing Sync for Windows Mobile OS

Mark/Space has released the Missing Sync for Windows Mobile version 4, which offers many feature improvements. Among them, likely the most important is support for the Windows Mobile 6 operating system.
A full list of what's new in this release is available here.

I installed the beta version of Missing Sync last night. It seems to be working well (contacts and calendar). Note that only Bluetooth connections are supported and you must read the detailed instructions for getting this to work.
I have yet to try a software installation.
I tried running Activesync 4.2 within Virtual PC 7 but it was hopeless so needed a Mac solution.

ITunes Airplay Icon Missing (iTunes 12, Windows 8.1)

Hi, all.
I'm new to the forum and did search for this topic, but most items I found were for 2013 and 2014.
I just updated to iTunes 12.1.1.4 and run Windows 8.1. I have an Apple TV in the media room, Apple Airport Express hooked up to a speaker in the living room, and an iHome iW1 speaker in the kitchen on my network.
On my iPad Air 2, I can see:
- Apple TV
- Airport Express
- iHome iW1
On my iPhone 6, I can see:
- Apple TV
- Airport Express
On my Windows machine, I can see:
- Nothing. There is no Airplay icon.
I'm willing to write off the iPhone issue. The iHome product has always been a bit buggy requiring way more restarts/resets than I thought was reasonable. But the Windows missing Airplay icon is maddening. It's the only way to broadcast music to more than one speaker in my pseudo-Sonos setup.
I've tried various fixes (restarts, modem restarts, IPv6/IPv4 switch on & off) with no luck. Anyone else experiencing this problem and/or have a suggested fix? Thanks!

Hey tomfrombothell,
I understand that you are experiencing some issues with your ability to AirPlay from iTunes on your PC. I do have some suggestions for you regarding this issue that can be found in the following article:
iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
https://support.apple.com/en-us/HT203822
Thanks for coming to the Apple Support Communities!
Regards,
Braden

CD/DVD Driver Missing; Re-installing Windows 7; *FIXED*

EDIT: I have found another possible solution, I will return shortly if it does not work.
EDIT2: The solution worked. It was found here. It is an HP solution. Thank you so much. While it wasn't exclusively to me, I know you guys slave away at helping people. I appreciate your hard work!
Hello,
Long story short: I let a co-worker use my laptop, he fiddled with something that he won't admit to, now I need to re-install windows 7 JUST to get in so I can use the RECOVERY partition that the latop came with.
However, when I use a USB boot device I get an error stating, "Missing cd/dvd drivers" before the installation even begins. The installation does give me an opportunity to install any missing drivers, but I can not seem to find what I require.
I have seen a few other posts regarding this on the HP support forums, one even mentioning extracting the files of another software installation and yanking out nvrd64.inf
I ran into another roadblock, again. That software installation only came with nvrd32.inf and it was not recognized by the HP laptop.
Any help would be greatly appreciated before I finally cave in and mail it in for repairs.
Regards,
Lindsey

Hi,
I don't believe that any of the recovery options from the Disc will retain your custom partition - As far as I know, the only time you will get a prompt to keep a custom partition is when using the 'Minimized Image Recovery' option from the Recovery Partition D which you have removed.
You could try the following work-around.
Download the correct Windows 7 Disc Image from the link below - this must be exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the version you would need to download.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.
Use the disc you create to perform the installation - when you get to the option to choose the type of installation, choose Custom and select the C partition.
When asked, enter the Windows activation key found on the underside of your notebook, then when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found starting Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Missing drivers for Windows 7 Professional with BootCamp.

I have a brand new MB Pro with 13" Retina, late 2013, 250 GB SS-disk, 8 GB RAM.
I need a partition with Windows 7 Professional, and I have an ISO with Norwegian Windows 7, service pack 1.
I run the BootCamp assistant to partition my HDD and to generate the USB-disk with Windows and the necessary drivers.
When i try to install Windows the Windows installer asks for a driver for the DVD-drive. I get a message that it cannot find a driver file and tells me to provide one. There is no DVD so that is correct. There is no way I can skip this part, and I must stop the intallation. I have not been able to trace down any dummy-drivers.
I have also tried to do this procedure with a USB-Superdrive attatched, but that did not help.

I am sorry, but this does not help me. I have tried. Or should I unpack all files to the top-level? I kept the folder structure.
I have downloaded the contents and it looks just like my Windows installation USB-disk that Boot Camp generates.
My problem is that when I am in the process of installing Windows, the installer stops because it does not find a driver for the CD/DVD-drive. I have chosen Language, and the next thing that happens is an error message. I can not complete the installation.
The error-message is something like this:
"Missing driver for CD/DVD station. ...
If the Windows installation medium is in the CD/DVD-station you may safely remove it before this step."
I have used the same iso-image to install a virtual machine using Virtual Box, so I think the image is OK. I need a dual-boot to avoid timing loss.

Missing driver with windows 8.1 installing or restoring

Hi all,
If I try to do a clean install of windows 8.1 the installation routine tells me helpfully that I am missing a media driver. The only way I could get round this was to create a USB bootablke disc and then add ALL the lenovo drivers that I have down loaded cfrom the lenovo site. This worked and it appeared to scan the USB drive and find whatever it was looking for. I'm still none the wiser as to what it was missing.
This problem is compounded when you try to restore from a backup image created in windows (I have a new drive and wanted to clone my old system). It finds the restore image on the external USB drive but can't seem to find the internal drive. This time however it won't scan a folder but wants me to provide the location of the actual INF file for the missing driver.
Can anyone help? I am assuming its the data/drive controller but I can't find it anywhere.
Thanks

hi Rolf,
You most tikely have the Seagate ST500LX005 SSHD.
just to verify, using this guide as a reference, are you getting stucked at Step 7? Also, is the SATA Mode set to AHCI under BIOS?
When you get the prompt to provide the location of the actual INF file for the missing driver, can you consider the following:
1. Download the f6flpy-x64.zip file on either of the links below and extract it on a usb flashdrive.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=22194
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=22676
2. Before running the system image recovery, insert the usb flashdrive and locate the iAAHCIC.inf / iaStorAC.inf file on flashdrive and use this path when you get the prompt to provide the location of the missing driver.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Cannot install Oracle11gR2 on Windows 8

Hi,
I download 64-bit version of Oracle11gR2 and tried to install on windows 8 64-bit version OS; When i clicked on setup, it opens Oracle Universal Installer command prompt for few second then suddenly disappears and after that no other windows open to process for further installation. I tried to install several times but results same.
I have watched several videos on YouTube to install Oracle11gR2 64-bit on Windows 8 64-bit. Its possible to install on Windows 8 but no officially support from Oracle corporation on this version Windows 8 OS.
Please let me know what's the reason that why I could not install Oracle11gR2 64-bit on Windows 8 64-bit.
Thanks.
Best Regards
Syed Arshad

user13360241 wrote:
Hi,
Coming back after 4 months.
Current oracle version download is (11.2.0.1.0) . Is it support to Windows 8 64-bit or not.
I have seen a new edition called Oracle Database 12c Release 1(12.1.0.1.0). Can this will support to windows 8 64-bit.
Thanks.
Oddly enough, the Insallation Guide lists all the pre-reqs for installation, including the supported OSs
Go to docs.oracle.com
Drill down to your selected product and version
Open the "Installing" group.
Open the Database Installation Guide
Click on the Oracle Database Preinstallation Requirements
Click on the Oracle Database Software Requriements
See the Supported OS's ..... http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
Pay attention to both the 'version' and 'edition'
If it aint' listed, you are on your own.

Boot Camp is missing after installing windows 8.1

One year ago i installed Windows 8 preview on my macbook air with Boot Camp and it has been working perfect until now.
I downloaded and installed Windows 8.1 full version directly from microsoftstore, but afterwards Boot Camp driver was missing from Windows (from Notification Area and Task Manager->Startup). Then i cant switch back to OS X.
Need help!

holding in option key during startup present you with the option of which partition you wish you boot into
you find the latests apple bootcamp drivers and utils here
Apple - Support - Downloads
just need to find the version which match your mac

EXTPROC_CONNECTION_DATA missing Oracle11GR2 on Windows

Similar Messages

Maybe you are looking for