Extract data of a company within the same client.
Hi gurus. If I have more than one company configured in the same client in the ERP, Is there any way to extract data of only one of those companys in order to transfer or copy this information in other ERP?.
I've listened about TDMS but I'm looking for any procedure or tool that ensure that only the data of one company of multiples is extracted.
Thanks a lot!. Greetings from Colombia.
Hi,
Could you please clarify what all data you want to extract. Is it master data ?
Incase you want to extract master data to any external system you can you SAP standard IDOCs using ALE.
Also you can put a filter in the distribution model to filter the extract data only to relvant company codes.
Thanks
Neel
Similar Messages
-
SO idoc from PO idoc within the same client
Hello SAP Gurus,
We need help with the following .
The requirement is we need to create the Sales order from Purchase order using idocs within the same client .
We created the partner profile of the customer and the vendor .
Customer ---maintained an inbound parameters with message type ORDERS and process code ORDE
Vendor -
maintained outbound parameters with message type ORDERS and idoc type ORDERS05 and process code ME10 .
Now when we create the PO and check the status in WE02 we get the error status 56 , EDI: Partner profile inbound not available.
What could be the posible cause of the error .
Anybody with some suggestions and solutions .
Thanks
HoneyHi ,
You should maintain in the inbound parameters and out bound parameters also
out bound parametrs
message typ[e---ORDERS
receiver port----
basic type -
ORDERS05
tick on transfer idoc immediately
Inbound parameters
message type ---ORDERS
process code --ORDE
if you have any further clarifications let me know
Regards
Damu -
HR Authorisation Management for different companies in the same client
Hi,
Could anyone please help in this....
My client has two companies. They want to restrict the authorisation to both the companies so that no one can see each other companies data and at the same time access tha data.
For Eg, there are two payroll officers, each in both the companies, If i give authorisation to run Payroll driver(PC00_M40_CALC), anyone of them can run payroll for any of the companies. (though,their Payroll area is different). There are many restrictions to be maintained like Maintance of Master data, Maintanance of OM structure as assignement of position, running Payroll, viewing the payslip etc...
How can this all be restricted so that, the respective companies can view and access their own data without interfering in to the other company.
I could only find object P_PYEVRUN which helps me restrict to view the created documents of posting for other company code.
Can anyone put light on how i should proceed further... I heard we can restrict HR master data, but what all i know is we can restrict at infotype level. My problem is, two persons should access PA30(each from different companies), but should not be able to edit other companies data.
Thanks
--PranithaHi ,
If you are creating the another company undar the same client . then you can not use different no. range.
or if you are going different client for different compnay code then you can use different number range for material master.
SAM -
How can I POST data within the same page if I have a A HREF -tag as input?
How can I POST data within the same page if I have a <A HREF>-tag as input? I want the user to click on a line of text (from a database) and then some data should be posted.
you can use like this or call javascript fuction and submit the form
<form method=post action="/mypage">
cnmsdesign.doc
</form> -
How to make use of adjacent data elements within the same buffer
Hi,
Does anyone know how to make use of adjacent data elements within the same buffer? To make my question clearly, I would like to give you an example. In my application, I set "sample to read" as 10 which means at each loop 10 data samples will be taken into a buffer. Now, what I would like to do is to do some calculations on adjacent data samples in same buffer. I tried to use "shift register" for this, but it seemed to me that it only can deal with the calculation between data from adjacent loops. In other words, it skips 9 data elements and take the 10th one for the calculation.
Here I also attach my VI showing what I did.
Thank you very much in advance,
Suksun
Attachments:
wheel_encoder_1.vi 98 KBHi Suksun,
I hope you'll forgive me for distilling your code - mainly to understand it better. I tried to duplicate your logic exactly - which required reversing the "derivatives"-array before concatination with the current samples array. As in your code, the last velocity is being paired with the first position. If first velocity is really supposed to be paired with first position, just remove the "Reverse 1D Array" node.
cheers
Message Edited by Dynamik on 01-07-2006 03:17 AM
Message Edited by Dynamik on 01-07-2006 03:19 AM
When they give imbeciles handicap-parking, I won't have so far to walk!
Attachments:
encoder2.GIF 14 KB
encoder2.vi 102 KB -
I bought a 16gb iphone 5 about 3 months ago and got applecare. yesterday I had to get on a different plan within the same company so i traded in my phone and got a new 32gb iphone 5. can i transfer my applecare to this new phone or would I have to buy it again?
As this is a WW forum with different AppleCrare offerings you need to specify which Country
as in North America has AppleCare+ and everywhere else AppleCare ,very different products
So to avoid incorrect guidance suggest you specify Country -
Retrieve data from other context node within the same context
Hi Experts,
I want to redefine method BUILD_TABLE for a table context node and I need to access data from another context node within the same context. I have looked through the methods of class CL_BSP_WD_CONTEXT_NODE_TV but could not find a mean of retrieving the other context nodes.
Any ideas?
Thanks a lot. Your help is appreciated.
Cheers,
JensHi Jens,
Check this [wiki|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=201066680] it should be helpful.
Regards,
Shobhit -
How can I start a new paragraph within the same table cell?
In Numbers, when adding text within a table frame, how can I start a new line within the same frame (rather than advancing to the next cell)? I'd like to enter a mini-list of several items of various lengths of data.
While Wayne's answer solves your problem, another possibility is to uncheck the box at the bottom of the Table inspector for "Return key moves to next cell." If that is unchecked, the return key types a paragraph return within the cell (the same as Option Return with the box checked).
With that box unchecked, Shift Return types a soft return (new line without a paragraph break). -
XML document structures must start and end within the same entity
Hi there,
I'm working with a client/server application and using SaxParser for reading in xml. I get the SaxParserException: XML document structures must start and end within the same entity. I understand what that means, but it isn't applicable! The xml data being used is well-formed. I checked the well-formedness with Stylus Studio to make sure. Here's the data:
<?xml version='1.0' encoding='UTF-8'?>
<vcmessage>
<vcsource>3</vcsource>
<processevent>16</processevent>
<shape>
<llindex>0</llindex>
<shapetype>9</shapetype>
<shapeproperties>
<shapelocation>
<xcoord>54</xcoord>
<ycoord>184</ycoord>
</shapelocation>
<bounds>
<width>24</width>
<height>24</height>
</bounds>
<fgcolor>
<fgred>0</fgred>
<fggreen>0</fggreen>
<fgblue>0</fgblue>
</fgcolor>
<bgcolor>
<bgred>255</bgred>
<bggreen>255</bggreen>
<bgblue>255</bgblue>
</bgcolor>
<thickness>1</thickness>
<isfilled>false</isfilled>
</shapeproperties>
</shape>
</vcmessage>The parser generally stops around the </bgcolor> tag.
I'm using Eclypse as my IDE. I'm wondering if there's something wrong with it? Or maybe there's something wrong with the class I'm using for reading in the XML? Followng is the class.
Please advise,
Alan
package vcclient;
import java.io.*;
import org.xml.sax.*;
import org.xml.sax.helpers.*;
import javax.xml.parsers.*;
public class XMLDocumentReader extends DefaultHandler
private VCClient client = null;
private Writer out;
private String lineEnd = System.getProperty("line.separator");
private boolean haveSourceType = false;
private boolean haveUserName = false;
private boolean haveMessage = false;
private boolean haveProcessEvent = false;
private boolean haveLinkedListIndex = false;
private boolean haveOpeningShapePropertiesTag = false;
private boolean haveShapeType = false;
private boolean haveOpeningShapeLocationTag = false;
private boolean haveShapeLocation = false;
private boolean haveOpeningXCoordTag = false;
private boolean haveOpeningYCoordTag = false;
private boolean haveOpeningBoundsTag = false;
private boolean haveBoundsWidth = false;
private boolean haveBoundsHeight = false;
private boolean haveOpeningFGColorTag = false;
private boolean haveOpeningBGColorTag = false;
private boolean haveOpeningThicknessTag = false;
private boolean haveOpeningIsFilledTag = false;
private boolean haveOpeningImageDataTag = false;
private boolean haveOpeningTextDataTag = false;
private boolean haveFGRed = false;
private boolean haveFGGreen = false;
private boolean haveFGBlue = false;
private boolean haveBGRed = false;
private boolean haveBGGreen = false;
private boolean haveBGBlue = false;
private boolean haveThickness = false;
private boolean haveIsFilled = false;
private boolean haveImageData = false;
private boolean haveTextData = false;
private VCMessage vcmessage = null;
public XMLDocumentReader(VCClient value)
client = value;
vcmessage = new VCMessage();
public VCMessage getVCMessage()
return vcmessage;
public boolean haveSourceType()
return haveSourceType;
public boolean ParseXML(InputStream stream)
boolean success = false;
// Use the default (non-validating) parser
SAXParserFactory factory = SAXParserFactory.newInstance();
try
// Set up output stream
out = new OutputStreamWriter(System.out, "UTF-8");
// Parse the input
SAXParser saxParser = factory.newSAXParser();
saxParser.parse( stream, this );
success = true;
catch (SAXParseException spe)
// Error generated by the parser
System.out.println("\n** Parsing error"
+ ", line " + spe.getLineNumber()
+ ", uri " + spe.getSystemId());
System.out.println(" " + spe.getMessage() );
// Unpack the delivered exception to get the exception it contains
Exception x = spe;
if (spe.getException() != null)
x = spe.getException();
x.printStackTrace();
return success;
catch (SAXException sxe)
// Error generated by this application
// (or a parser-initialization error)
Exception x = sxe;
if (sxe.getException() != null)
x = sxe.getException();
x.printStackTrace();
return success;
catch (ParserConfigurationException pce)
// Parser with specified options can't be built
pce.printStackTrace();
return success;
catch (Throwable t)
t.printStackTrace();
return success;
return success;
public void startDocument()throws SAXException
emit("<?xml version='1.0' encoding='UTF-8'?>");
nl();
public void endDocument()throws SAXException
try {
nl();
out.flush();
} catch (IOException e) {
throw new SAXException("I/O error", e);
public void startElement(String namespaceURI,
String lName, // local name
String qName, // qualified name
Attributes attrs)throws SAXException
String eName = lName; // element name
if (eName.equals(""))
eName = qName; // namespaceAware = false
emit("<"+eName);
if (attrs != null) {
for (int i = 0; i < attrs.getLength(); i++) {
String aName = attrs.getLocalName(i); // Attr name
if (aName.equals("")) aName = attrs.getQName(i);
emit(" ");
emit(aName + "=\"" + attrs.getValue(i) + "\"");
emit(">");
if(makeStartTag(eName).equals(Constants.OPENING_SHAPEPROPERTIES))
haveOpeningShapePropertiesTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_SHAPELOCATION))
haveOpeningShapeLocationTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_BOUNDS))
haveOpeningBoundsTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_FGCOLOR))
haveOpeningFGColorTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_BGCOLOR))
haveOpeningBGColorTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_BGGREEN))
System.out.println("See BGGreen");
else if(makeStartTag(eName).equals(Constants.OPENING_BGBLUE))
System.out.println("See BGBlue");
else if(makeStartTag(eName).equals(Constants.OPENING_THICKNESS))
haveOpeningThicknessTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_ISFILLED))
haveOpeningIsFilledTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_IMAGEDATA))
haveOpeningImageDataTag = true;
else if(makeStartTag(eName).equals(Constants.OPENING_TEXTDATA))
haveOpeningTextDataTag = true;
public void endElement(String namespaceURI,
String sName, // simple name
String qName // qualified name
)throws SAXException
if(sName.equals("") && !qName.equals(""))
sName = qName;
emit("</"+sName+">");
else
emit("</"+sName+">");
if(makeEndTag(sName).equals(Constants.CLOSING_SOURCE_TYPE))
haveSourceType = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_USER))
haveUserName = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_MESSAGE))
haveMessage = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_PROCESSEVENT))
haveProcessEvent = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_LINKEDLISTINDEX))
haveLinkedListIndex = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_SHAPETYPE))
haveShapeType = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_SHAPELOCATION))
haveOpeningShapeLocationTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_WIDTH))
haveBoundsWidth = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_HEIGHT))
haveBoundsHeight = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_BOUNDS))
haveOpeningBoundsTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_FGRED))
haveFGRed = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_FGGREEN))
haveFGGreen = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_FGBLUE))
haveFGBlue = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_FGCOLOR))
haveOpeningFGColorTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_BGRED))
haveBGRed = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_BGGREEN))
haveBGGreen = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_BGBLUE))
System.out.println("See closing BGBlue");
haveBGBlue = true;
else if(makeEndTag(sName).equals(Constants.CLOSING_BGCOLOR))
haveOpeningBGColorTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_THICKNESS))
System.out.println("XMLDocumentReader: Step2");
haveOpeningThicknessTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_ISFILLED))
haveOpeningIsFilledTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_IMAGEDATA))
haveOpeningImageDataTag = false;
else if(makeEndTag(sName).equals(Constants.CLOSING_TEXTDATA))
haveOpeningTextDataTag = false;
private String makeStartTag(String tag_name)
String start = "<";
String end = ">";
return start.concat(tag_name).concat(end);
private String makeEndTag(String tag_name)
String start = "</";
String end = ">";
return start.concat(tag_name).concat(end);
public void characters(char buf[], int offset, int len)throws SAXException
String s = new String(buf, offset, len);
if(haveSourceType == false)
if(vcmessage.getSourceType() == null)
try
if(s.equals(""))return;
int sourcetype = Integer.parseInt(s);
vcmessage.setSourceType(sourcetype);
catch(NumberFormatException nfe){}
else if(vcmessage.getSourceType() == SourceType.CHAT_SOURCE)
if(vcmessage.getSourceType() == SourceType.CHAT_SOURCE && haveUserName == false)
vcmessage.setUserName(s);
else if(vcmessage.getSourceType() == SourceType.CHAT_SOURCE && haveMessage == false)
//When the parser encounters interpreted characters like: & or <,
//then this method gets invoked more than once for the whole message.
//Therefore, we need to concatonate each portion of the message. The
//following method call automatically concatonates.
vcmessage.concatMessage(s);
else if(vcmessage.getSourceType() == SourceType.WHITEBOARD_SOURCE)
if(haveProcessEvent == false)
try
vcmessage.setProcessEvent(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveLinkedListIndex == false)
try
vcmessage.setLinkedListIndex(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveShapeType == false)
try
vcmessage.setShapeType(Integer.parseInt(s));
catch(NumberFormatException nfe){}
if(haveOpeningShapePropertiesTag)
if(haveOpeningShapeLocationTag)
if(haveOpeningXCoordTag)
try
vcmessage.setXCoordinate(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveOpeningYCoordTag)
try
vcmessage.setYCoordinate(Integer.parseInt(s));
//reset all flags for ShapeLocation, X and Y coordinates
haveOpeningXCoordTag = false;
haveOpeningYCoordTag = false;
//haveOpeningShapeLocationTag = false;
catch(NumberFormatException nfe){}
else if(haveOpeningBoundsTag)
if(haveBoundsWidth == false)
try
vcmessage.setBoundsWidth(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveBoundsHeight == false)
try
vcmessage.setBoundsHeight(Integer.parseInt(s));
//reset flag
//haveOpeningBoundsTag = false;
catch(NumberFormatException nfe){}
else if(haveOpeningFGColorTag)
if(haveFGRed == false)
try
vcmessage.setFGRed(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveFGGreen == false)
try
vcmessage.setFGGreen(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveFGBlue == false)
try
vcmessage.setFGBlue(Integer.parseInt(s));
//reset flag
//haveOpeningFGColorTag = false;
catch(NumberFormatException nfe){}
else if(haveOpeningBGColorTag)
if(haveBGRed == false)
try
vcmessage.setBGRed(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveBGGreen == false)
try
vcmessage.setBGGreen(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveBGBlue == false)
{ System.out.println("getting BGBlue data");
try
vcmessage.setBGBlue(Integer.parseInt(s));
//reset flag
//haveOpeningBGColorTag = false;
catch(NumberFormatException nfe){}
else if(haveOpeningThicknessTag)
try
vcmessage.setThickness(Integer.parseInt(s));
catch(NumberFormatException nfe){}
else if(haveOpeningIsFilledTag)
vcmessage.setIsFilled(s);
else if(haveOpeningImageDataTag && vcmessage.getProcessEvent() == org.jcanvas.comm.ProcessEvent.MODIFY)
vcmessage.setBase64ImageData(s);
else if(haveOpeningTextDataTag && vcmessage.getProcessEvent() == org.jcanvas.comm.ProcessEvent.MODIFY)
vcmessage.setTextData(s);
//reset
haveOpeningShapePropertiesTag = false;
emit(s);
//===========================================================
// Utility Methods ...
//===========================================================
// Wrap I/O exceptions in SAX exceptions, to
// suit handler signature requirements
private void emit(String s)throws SAXException
try {
out.write(s);
out.flush();
} catch (IOException e) {
throw new SAXException("I/O error", e);
// Start a new line
private void nl()throws SAXException
try {
out.write(lineEnd);
} catch (IOException e) {
throw new SAXException("I/O error", e);
//treat validation errors as fatal
public void error(SAXParseException e)
throws SAXParseException
throw e;
// dump warnings too
public void warning(SAXParseException err)
throws SAXParseException
System.out.println("** Warning"
+ ", line " + err.getLineNumber()
+ ", uri " + err.getSystemId());
System.out.println(" " + err.getMessage());
}Just out of curiosity what happens if you append a space to the end of the XML document?
-
Using an WD Component twice within the same Component
Hi all,
our company has made a WD Component for editing business partners.
My job is to build a WD Component where two business partners (different roles) are edited within the same window.
My idea was to make 2 separate component usages of the Business Partner WD Component within my component.
This just works fine. But there is a problem when mapping the context of both Business Partner-Components into my WD Component. There are always naming conflicts. This is because it is not allowed that there are two nodes with the same name in the context, even if they are in different subnodes. Renaming the nodes after mapping them in my component also doesn't work, because it is not possible to rename nested nodes.
Does anyone know a solution?
Kind regards,
FlorianHi Anurag,
thank you for giving me help. You are right, it is possible to use a component twice within the same webdynpro component.
But the problem is the context mapping in the target component.
Let me give you an example.
This is the context of the twice used component.
CONTEXT
|
|->NODE_1
| |
| |->SUBNODE_1
| | |
| | |->SUBSUB_NODE_1
| | | |
| | | |->ATTRIBUTE_1_1_1
| | | |->ATTRIBUTE_1_1_2
| | |->SUBSUB_NODE_2
| | |->SUBSUB_NODE_3
| | |->ATTRIBUTE_1_1
| | |->ATTRIBUTE_1_2
| |->ATTRIBUTE_1
| |->ATTRIBUTE_2
| |->ATTRIBUTE_3
Now, if i map this context (NODE_1) to the target web dynpro component I have a problem. I have to map it twice (one time for each used component), so that i can access both used components. But WebDynpro only allows me to rename the node NODE_1. Mapped subnodes (SUBNODE_1, ...) cannot be renamed. So i cannot map the context of both used components, because there are always naming conflicts. WebDynpro doesn't allow that there are two nodes with identical names within the context, even if they are in different subnodes.
Is there a solution? We really need one.
Thanks
Florian -
How do I merge external drive images to desk top drive within the same master catalog?
I have about 900 raw files on an external drive. I edited those files using my master catalog using a laptop while still travelling. When I got home, I copied the master catalog from the external drive to the desk top, then opened the master catalog on my desktop. I can see the edited images on the external drive. So far so good.
I want to copy (add) the edited images to my desk top. I tried to export the images as a new catalog and then import it into the desire location on my desktop drive. However, LR5 does not allow that. I get this message: "There is nothing new in the catalog you have selected. All of the catalog's photos are up to date in this catalog." Yes, but the edited images are not on my desktop.....
I also tried to Import from the external drive and then Copy the files to the desktop, but then I lose all of the work done in the develop module and the keywords.
I watched Kost's LR 3 video on merging catalogs, but she dodges the question of how to deal with this issue since the "merge" is within the same catalog.
I'm using LR5 with Windows 7.
Any suggestions would be immensely appreciated as I've spent hours trying to resolve this problem.Okay, so I would copy (not move) the folders/photos to the internal HD, keeping them in the same folder hierarchy as they are in now on the external HD. Yes, of course the drive name will be different, but other than that the folder path and file name should be the same.
Then, open the LR catalog that indexes the files and Update Folder Location (details are here: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm, scroll down to the "Update Folder Location" section)
Then, once that is complete and everything is working in your LR catalog, with no question marks on the photos or folders, optionally delete the photos on the external HD. -
Logic for DC selection for authentication within the same AD site
Hello All, I am working on extending AD service from an existing data center to a new data center. As part of co-existence, I have created new DC's in the new data center but kept them as part of the AD site in the existing data center. Both the data centers
have a 1 GB connectivity.
What I would like to know is - would there be any internal logic in calculating which DC should a client authenticate against based on network latency or something like that ? I wanted to know if there was any way I can restrict the user workstations at
the existing data center location (which is also the HQ location) to authenticate against the DC's available locally instead of travelling to the new DC's at the new data center, within the same AD site. I cannot make the new data center a separate AD site
for now due to the migration challenges.
Any inputs would be highly appreciated. Thanks in advance.Hi Goldy,
I will recommend you to create a separate AD site and configure sites and services accordingly, if you dont want clients to authenticate against the new DC.
DC locator is the service name which is responsible for assigning a logon DC to the client.
If the DC's are in different sites you can configure the sites and services to point the client to correct DC in a site. AD authentication always distributed based on the sites and services you configured.
You can configure ldapsrv records to authenticate against specific DC.
Domain Controller Locator : an overview
http://blogs.technet.com/b/arnaud_jumelet/archive/2010/07/05/domain-controller-locator-an-overview.aspx
How DNS Support for Active Directory Works
http://technet.microsoft.com/en-us/library/cc759550(WS.10).aspx
LdapSrvWeight & LdapSrvPriority
http://blogs.dirteam.com/blogs/carlos/archive/2006/05/10/How-to-lessen-your-PDC_1920_s-load.aspx
http://technet.microsoft.com/en-us/library/cc816793%28WS.10%29.aspx
How
Domain Controllers Are Located in Windows
http://support.microsoft.com/kb/247811
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing! -
Illegal cross join within the same dimension
Hi,
When certain fields are selected within the presentation table an "illegal cross join" error is returned by the BI Server. However if a FACT is added from one of the other presentation tables the "illegal cross join" error goes away. we need to query without fact column.
We are getting following error
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14065] Illegal cross join within the same dimension caused by incorrect subject area setup: [ CALL_CENTER.COUNSELOR_MANAGER T782130] with [ CALL_CENTER.COUNSELOR_HR T781594 On CALL_CENTER.COUNSELOR_HR.MASTER_STAFF_COUNSELOR_ID = CALL_CENTER.MASTER_STAFF_COUNSELOR.MASTER_STAFF_COUNSELOR_ID, CALL_CENTER.MASTER_STAFF_COUNSELOR T781739] (HY000)
Can anybody help me solving this issue.
Thanks,
KS.Please give us an example of what you need.
OBIEE perform a query in the dimension or through the fact table.
You can't join two dimensions in the repository without going through a fact table.
If you need to query without fact column, it's because you have design two dimensions where
normally you can do one.
You have then two solutions :
* change the design of your logical model to make only one dimension.
* use the OBIEE logical SQL in answer.
http://gerardnico.com/wiki/dat/obiee/bi_server/design/obiee_logical_sql
Success
Nico -
JTable edited data doesn't appear in the same time
Hi
i have aserious problem JTable edited data doesn't appear in the same time imust tom minimize the frame and maximize it to see the table modified what is the reason?Quit multi-posting the same question every time. You asked this same question 3 hours ago:
http://forum.java.sun.com/thread.jspa?threadID=729894
The last time you posted the same question within two minutes of one another:
http://forum.java.sun.com/thread.jspa?threadID=729202
http://forum.java.sun.com/thread.jspa?threadID=729200
Not only that, you never bother to reply to your postings to indicate whether the advice given was helpfully or not. This is commonly known as thanking people for the time spent helping your.
Learn to use the forum correctly or you will be on your own in the future. -
How to use multiple profiles within the same instance of Thunderbird
About a month ago, I had Thunderbird configured with three profiles,
and all three could be used within a single startup/instance of
Thunderbird. That PC is now gone. I have re-configured the three
profiles on a new PC, but am having trouble making all three
useable within the same instance of Thunderbird. Can you help?
Both PCs are/were Windows-7 64 bit.Thunderbird only opens on the default if one profile
or
if Profile Manager is instructed to ask at startup it will allow you to choose which Profile to open else it opens on the last Profile used..
So it shows one Profile at a time in one instance of Thunderbird.
However, one Profile can have many mail accounts.
eg: I run 4 mail accounts in one Profile.
Maybe you are looking for
-
HT4623 i cant activate my iphone after i update it to ios 6
i cant activate my iphone 3 after i update the ios...it always ask me to contact customer care..itunes..and wifi is not working to activate it... i need urgent help..i need to go somewhere and im 3hrs late bec i cant use my phone
-
Whenever I open a new Firefox window there is a new Firefox ad. AdBlocker Plus does not seem to block Firefox ads. All ads are annoying. Period. Even yours. Is it possible to block these ads? Please advise. Thanks!
-
Generate Sequential values for a column
Hi, I had a column in named 'ID' in the block of my form. I want to generate sequential values for the column without using sequence. Suppose if the table does not have any data it has display the starting value what i am providing.(ex. 101).If the d
-
Is it possible to open a numeric link instead of calling it?
When you click on a numeric link in the web browser it tries to dial it, even if it's not a phone number (even when it doesn't look anything like a phone number, although I guess it's hard to tell with international numbers.) There seems to be no opt
-
RV082 - SRP527W - VPN behind NAT not working
Hello, I've really strange behaviors with my routers. We managed to get things running but once a week, the VPN link is down. The connection is not restart, both routers shows "connected" but are not, and we had to click on "disconnect" to get the li