Extract the data from URL using XI

Hi,
Please let me know if  you have idea  about this:
Scenario is:
1. We are extracting some raw data (strings) from one url(http) using java program ...
2. After extracting the data , some parsers making the XML files for that.
Now my question is :
Will able to add these javacalsses(java program) into XI for trigger the messages from url?
It means I need to call url through XI and make the xml for that. After getting XML we need to map RFC for process the messages into ZTable.
I didn't get idea about  how to make call for url through XI. It would be appreciated for sharing your expereince on this..
Regards...Raj!

Hi,
>>>>Will able to add these javacalsses(java program) into XI for trigger the messages from url?
yes you can do it all in a java proxy
you just have to invoke a java proxy
and inside you can put any java code you wish
then you can use the parser and fill the xml message
>>>>It means I need to call url through XI and make the xml for that. After getting XML we need to map RFC for process the messages into ZTable.
then you can map your xml message to an rfc format
if you have the java classes that access
the url this will be very easy with a java proxy
for more:
https://websmp206.sap-ag.de/~sapdownload/011000358700000877852006E/HowToWorkWithJavaProxies.pdf
Regards,
michal

Similar Messages

  • How to extract the data from SAP using Msaccess tool ?

    Hi Experts,
    Purpose u2013
    Want to extract the data in a better way rather than using the T.code u2013 SE16
    regards
    Kedar Kulkarni

    Hi,
    Try this...
    Please use the standard ABAP program "RIACCESS".
    Before using the program "RIACCESS", you need to install the PS utilities, which are part of SAPGUI install CD.
    It is available in the "\SAPGUI\PS directory". 
    Then do the followings :
    1. Select transaction code SALE -> Systems in network-> Define RFC Destination. 
    2. You will need two RFC destinations (TCP/IP connections for the front-end workstation). 
         Setup the two RFC destinations PS_ACCESS_1 and PS_ACCESS_2 and you'll have to get them to point to wdpsastr.exe and wdpsatab.exe respectively. 
    3. Then execute RIACCESS and choose PS_ACCESS_1 to generate access tables. 
    The system must also be able to access the RFC-DLL files (librfc2.dll, librfc3.dll, librfc4.dll, librfc5.dll, librfc6.dll, vrfc.dll). 
    Please note that Access only supports tables with up to 255 fields.

  • Use LINQ to extract the data from a file...

    Hi,
    I have created a Subprocedure CreateEventList
    which populates an EventsComboBox
    with a current day's events (if any).
    I need to store the events in a generic List communityEvents
    which is a collection of
    communityEvent
    objects. This List needs to be created and assigned to the instance variable
    communityEvents.
    This method should call helper method ExtractData
    which will use LINQ to extract the data from my file.
    The specified day is the date selected on the calendar control. This method will be called from the CreateEventList.
    This method should clear all data from List communityEvents.  
    A LINQ
    query that creates CommunityEvent
    objects should select the events scheduled for selected
    day from the file. The selected events should be added to List
    communityEvents.
    See code below.
    Thanks,
    public class CommunityEvent
    private int day;
    public int Day
    get
    return day;
    set
    day = value;
    private string time;
    public string Time
    get
    return time;
    set
    time = value;
    private decimal price;
    public decimal Price
    get
    return price;
    set
    price = value;
    private string name;
    public string Name
    get
    return name;
    set
    name = value;
    private string description;
    public string Description
    get
    return description;
    set
    description = value;
    private void eventComboBox_SelectedIndexChanged(object sender, EventArgs e)
    if (eventComboBox.SelectedIndex == 0)
    descriptionTextBox.Text = "2.30PM. Price 12.50. Take part in creating various types of Arts & Crafts at this fair.";
    if (eventComboBox.SelectedIndex == 1)
    descriptionTextBox.Text = "4.30PM. Price 00.00. Take part in cleaning the local Park.";
    if (eventComboBox.SelectedIndex == 2)
    descriptionTextBox.Text = "1.30PM. Price 10.00. Take part in selling goods.";
    if (eventComboBox.SelectedIndex == 3)
    descriptionTextBox.Text = "12.30PM. Price 10.00. Take part in a game of rounders in the local Park.";
    if (eventComboBox.SelectedIndex == 4)
    descriptionTextBox.Text = "11.30PM. Price 15.00. Take part in an Egg & Spoon Race in the local Park";
    if (eventComboBox.SelectedIndex == 5)
    descriptionTextBox.Text = "No Events today.";

    Any help here would be great.
    Look, you have to make the file a XML file type -- Somefilename.xml.
    http://www.xmlfiles.com/xml/xml_intro.asp
    You can use NotePad XML to make the XML and save the text file.
    http://support.microsoft.com/kb/296560
    Or you can just use Notepad (standard), if you know the basics of how to create XML, which is just text data that can created and saved in a text file, which, represents data.
    http://www.codeproject.com/Tips/522456/Reading-XML-using-LINQ
    You can do a (select new CommunityEvent) just like the example is doing a
    select new FileToWatch and load the XML data into the CommunityEvent properties.
    So you need to learn how to make a manual XML textfile with XML data in it, and you need to learn how to use LINQ to read the XML. Linq is not going to work against some  flat text file you created. There are plenty of examples out on Bing and Google
    on how to use Linq-2-XML.
    http://en.wikipedia.org/wiki/Language_Integrated_Query
    <copied>
    LINQ extends the language by the addition of query
    expressions, which are akin to
    SQL statements, and can be used to conveniently extract and process data from
    arrays, enumerable
    classes, XML documents,
    relational databases, and third-party data sources. Other uses, which utilize query expressions as a general framework for readably composing arbitrary computations, include the construction of event handlers<sup class="reference" id="cite_ref-reactive_2-0">[2]</sup>
    or
    monadic parsers.<sup class="reference" id="cite_ref-parscomb_3-0">[3]</sup>
    <end>
    <sup class="reference" id="cite_ref-parscomb_3-0"></sup>

  • Unable to extract the data from ECC 6.0 to PSA

    Hello,
    I'm trying to extract the data from ECC 6.0 data source name as 2LIS_11_VAHDR into BI 7.0
    When i try to load Full Load into PSA , I'm getting following error message
    Error Message: "DataSource 2LIS_11_VAHDR must be activated"
    Actually the data source already active , I look at the datasource using T-code LBWE it is active.
    In BI  on datasource(2LIS_11_VAHDR) when i right click selected "Manage"  system is giving throughing below error message
    "Invalid DataStore object name /BIC/B0000043: Reason: No valid entry in table RSTS"
    If anybody faced this error message please advise what i'm doing wrong?
    Advance thanks

    ECC 6.0 side
    Delete the setup tables
    Fill the data into setup tables
    Schedule the job
    I can see the data using RSA3 (2LIS_11_VAHDR) 1000 records
    BI7.0(Service Pack 15)
    Replicate the datasource in Production in Backgroud
    Migrate Datasource 3.5 to 7.0 in Development
    I did't migrate 3.5 to 7.0 in Production it's not allowing
    When i try to schedule the InfoPakage it's giving error message "Data Source is not active"
    I'm sure this problem relate to Data Source 3.5 to 7.0 convertion problem in production. In Development there is no problem because manually i convert the datasource 3.5 to 7.0
    Thanks

  • How can I extract the data from Xstring .

    Hi Gurus ,
    How can I extract the data from a XSTRING  .
    I have to get the data which is filled in the survey form the data is getting saved in form of xstring .
    Someone told me that there is a standard FM for that . but I am not able to find .
    Please reply with the FM in case some one knows about it .
    Thanks in advance .

    The following code works as of 7.0 (in any SAP system):
    FORM XSTRING_TO_STRING USING input TYPE xstring CHANGING output TYPE string.
    TYPES : BEGIN OF ty_struc,
              line TYPE c LENGTH 100,
            END OF ty_struc.
    DATA lt_char TYPE TABLE OF ty_struc.
    DATA length TYPE i.
    length = xstrlen( input ) / cl_abap_char_utilities=>charsize.
    CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
      EXPORTING
        buffer                = input
      tables
        binary_tab            = lt_char.
    CONCATENATE LINES OF lt_char INTO output RESPECTING BLANKS.
    output = output(length).
    ENDFORM.
    Edited by: Sandra Rossi on Mar 30, 2010 12:24 AM

  • How to Extract the data from Microsoft BI to SAP BI 7

    Dear All,
    We have a requirement to Extract the data from Microsoft BI to Sap BI 7. How can we achieve this??
    Shall we use the DB connection for this??
    If anyone knows about this please give me some suggestion.
    Thanks in advance
    Sathiya

    Hi All,
    How to include the DBMS name when I give the connection. We are using the Data base as MS-BI.
    Please guide me
    Thanks in advance.
    Regards
    Sathiya

  • How to extract the data from R/3?

    Gurus,
    I need to extract the data from R/3 to BI . Below i am giving Table name followed by field name and field description.
    I am using BI 7.0 and ECC 6.0
    I am having following doubts.
    1. Based on below information which extract method I need to use (Generic data  Extraction?)?
    2. I try to create a one view but I could not find Join between the tables. I found only few joins. how to join other tables?
    3. Without joining these table how can I collect the data ?
    4. Do i need to create multiple tables?
    SAP Table      SAP Field        Field Description
    VBAK->             VBELN->        Sales Document
    VBAP->             WERKS->        Plant
    VBAK->              AUART->            Doc Type
    VBAP->             PSTYV->        Item Category
    VBAP->             MATNR->        Material
    VBAP->             ARKTX->        Description
    MATNR->              GROES->     
    VBAP->             ZIEME->        Target Quantity UOM
    VBAP->             WAVWR->        Cost
    VBAK->             ERNAM->        Name of a person who created the object
    VBAKA->             KUNNR->        Customer Number 1
    VBAP->             BSTNK->                 Customer purchase Order no
    VBEP->             BANFN->        Purchase Requisition Number
    QMFE->             FEGRP->        Cause Code(Code Group Problem)
    QMFE->             FECOD->        Damage Code(Problem or Damage Code)
    QMEL->             QMNUM->        Notification No
    EQUI->             EQUNR->        Equipment Number
    QMEL->             QMART->        Notification Type
    QMELI->             ERDAT->        Date on Which Record Was Created
    ============================================================================================
    Gurus I will assign full points .
    Thanks

    Hi,
    I would use the standard extractor 2lis_11_vaitm and enhance it for the following fields:
    VBEP-> BANFN-> Purchase Requisition Number
    QMFE-> FEGRP-> Cause Code(Code Group Problem)
    QMFE-> FECOD-> Damage Code(Problem or Damage Code)
    QMEL-> QMNUM-> Notification No
    EQUI-> EQUNR-> Equipment Number
    QMEL-> QMART-> Notification Type
    QMELI-> ERDAT-> Date on Which Record Was Created
    regards
    Siggi

  • BW 7.3 ,can we extract delta data from mutiproviders using OHD

    Hi Gurus,
    My requirement is to extract the delta data from multiple infocube (more than one IC) using open hub destination to third party system. We thought of implementing BW 7.3 so that we can extract delta data from multiproviders instead of cubes to open hub destination...
    My question is:
    1.Is that possible to extract delta data from multiproviders using open hub destination.
    2.Is there any limitations?
    3.list of possible known issues from BW7.3 .
    Please suggest your valuble experience..
    Thanks in advance
    Vaish

    Hi Vaish,
    Yes you are right. In 7.3 we can extract data from MultiProviders using DTP.
    This is the new functionality in 7.3
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/304444f7-e02d-2d10-9c97-d5e3ecf09882?QuickLink=index&overridelayout=true
    check the 18th slide in the above PDF
    Regards,
    Venkatesh

  • HOw to connect and extract the data from MS ACCESS SOURCE(Database) system

    Hi experts ,
    I have to extract the data from MS access database system using JDBC adapter will it work if Yes HOW?

    Hi Sushma,
    how to configure sendor JDBC adapter ..
    Select adapter type is JDBC..
    Give the Transport Protocol:.JDBC 2.0 (Example)............
                Message Protocol:...JDBC...........
                IAdapter Engine : Integration Server
    Processing Parameters..
    Quality of service.....(Example)..Exactly once
    Poll Interval .... Example ..10
    Query Sql statement..Example ..select * from XXXXX
    Document Name.....
    Update Sql stetement.....
    Thanks,
    Satya
    Reward points if it id useful...

  • Can't extract the data from sourse system

    hi,everyone
       i have a question about extracting the data from sourse system.i created a general datasourse.in the r3 system,i used t-code:rsa3 to extract the data successful. but ,when i replicate the datasourse to the bw system,i can't extract the data to the psa. in the process of the extracting,accur a error like below:
    Errors while sending packages from OLTP to BI
    Diagnosis
    No IDocs could be sent to BI using RFC.
    System Response
    There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
    Further analysis:
    Check the TRFC log.
    You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
    Error handling:
    If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the
    authorizations of the background user in the source system.
    who can tell me why?
    thx
    zhang

    Hi zhang,
    Please check the below points.
    1. Perform the connection and authorization test in SM59 for the RFC connecion.
    2. Make sure the RFC user extracting the data is having sufficient authorization and correct profile as per note 150315.
    3. make sure there are sufficient number of Dialog process in BW in SM50.
    4. check T code SM58 in source system for any more errors.
    5. check the connection between the systems.
    Check
    Note 561880 - Requests hang because IDocs are not processed.
    Note 535172 - IDoc: Dup. IDocs in tRFC inbound processing w/ runtime error
    Note 555229 - IDocs hang in status 64 for tRFC with immediate processing
    Hope this helps.
    Regards,
    Suman.T

  • Need to extract the data from the CRM table : SCAPPTSEG

    Hi BW Experts,
    I want to extract the Data from CRM Table "SCAPPTSEG" to BW. The dates are stored in UTC Format.So for getting the date in CET format, we have used the Function Module "IB_CONVERT_FROM_TIMESTAMP".
    I want to create a datasource for extracting the data from "SCAPPTSEG" table and i need to use the function module for getting the date in CET Format.
    Can i achieve this action through Generic Extraction.
    please provide me the steps to achieve this.
    Thanks,
    Shahina.A

    not answered

  • Error occured while extracting the data from BSIK Table

    Hi Experts,
    I am trying to extract the data from "BSIK"  by using generic extraction by table, I am getting the error "Invalid extractiion Structure template BSIK of Data source XXXXXX", But when i am trying the same by using VIEW, i am able to do it,
    I am getting same problem while extracting the data from other tables like "BSIK, BSAK.........."
    can some one explain me why it is throughing some error when i am doing generic extraction by using Table,
    Thanks,

    Hi,
    Can you check below link:
    Invalid extract structure template ZBW_VW_EKES of DataSource ZBW_SCN_VENDOR
    Hope this answer your question!
    Regards,
    Nilima

  • Extract the data from xbrl source

    Hi ,
    I want to extract the data from xbrl source system . I have one xsd, few xml files and one xbrl file .   I have imported xsd file  but lot of the xml files failing to parse against xsd.
    Please guide me how to extract the data from xbrl file .
    Thanks & Regards,
    Ramana.

    Hi,
              Yes it will work, follow the bellow steps,
    Steps
    1) Create a blank database in Microsoft Access, lets call it 'TestDB.mdb'. I saved this mdb file in my XI server path itself,
    xiserver\xitemp\db\TestDB.mdb
    (you can save it anywhere provided it has a shared access)
    2) Add a table in TestDB.mdb, call it TEST_EMPLOYEE with the following rows and save it.
    EMPID type text
    EMPNAME type text
    EMPAGE type number
    FLAG type text
    3) Now follow the same steps as mentioned in the blog,
    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
    except for the receiver jdbc adapter configuration.
    4) In the receiver JDBC adapter configuration pass the following parameters,
    Transport Protocol: JDBC 2.0
    Message Protocol: XML SQL Format
    Adapter Engine: Integration Server
    JDBC Driver: jdbc.odbc.JdbcOdbcDriver
    Connection: jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb
    5) In my case there is no userid and password required, but if you have userid and password, then the parameter for Connection becomes,
    jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb;Uid=yourid;Pwd=yourpwd;
    Reward Points ,if found Useful.
    Thanks,
    Satish.

  • Is it possible to Extract the Data from Website?

    Dear Experts,
            Is it possible to Extract the Data from Website and Upload it in the SAP Table?.It is very Urgent.Please help me.
    Thanks & Regards,
    Ashok.

    Hi Friend,
    Generaly if it is one time activity you can do it manually by copy paste in excel.
    But if it is weekly or monthly activity then you have to ask website provide to provide data in excel or CSV file and upload it into SAP.
    I have a situtation like this, and they (Rapaport price) provide it in CSV format with defined columns.
    So it is better to raise the issue to website provider.
    Regards
    Krishnendu

  • How to Extract the data from R/3 Genric extractor to BW ?

    How to Extract the data from R/3 Genric extractor to BW ?

    hi,
    step by step procedure for generic extraction delta
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    Refer:
    /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    Generic Extraction via Function Module
    /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    Extractions in BI
    https://www.sdn.sap.com/irj/sdn/wiki
    New to Materials Management / Warehouse Management?
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1b439590-0201-0010-ea8e-cba686f21f06
    Ramesh

Maybe you are looking for

  • Add a new field in report S_ALR_87012178 and use it for sorting

    Hi all, We're requested to add a new field KNVV-VKGRP in this report S_ALR_87012178 (program RFDOPR10). As this is a standard program, I'm thinking of copying it into a Z one due to the problems when editing the report. Does anyone know the best way

  • Whenever I open a pdf document in a tab, it takes away my ability to scroll through websites open on other tabs. How do I fix this?

    I have use a laptop with a mouse, and I have the touch pad enabled. When I have just one PDF open the touch pad will scroll through only the PDF while the mouse wheel will still scroll through websites in other tabs. However if I open a second PDF th

  • Can't Open NEF files in CS5

    I am currently using the Nikon D3200 and I can't update my camera raw plug-in to 7.1 because I am using CS5. On the supported cameras page, (http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html) it says that I need 7.1 in o

  • Strange Error in error.log possibly Internet-Sharing related

    I recently got this error message repeating every 2 Seconds or so (date and hostname clipped): +InternetSharing[524]: Internet Sharing shutting down+ +com.apple.launchd[1] (com.apple.InternetSharing[524]): Exited with exit code: 1+ +com.apple.launchd

  • Unable to create Custom Attributes

    I just recently did an install of EPM 11.1.2.3. When I go to add custom attribute in Planning under entity I get an error stating "An error occurred while processing this page". I have uninstalled and re-installed about 3-4 times and still get the sa