Extracting data from Ms power point ?

Hello every one
My application is to draw the user defined symbols on the map area . And then represent the
whole map along with the shapes drawn on it in labview 2d picture control
So,
1 While reading the image from power point is it possible to seperate the Back ground image map
and the shapes what we had drawn , so that i can save them seperately and represent when ever
user is in need of them in 2d pic control.
Please see the attached vi
Attachments:
Power point with labview.zip ‏190 KB

Hello Pankaj
This is the attached vi in 2011 format
Attachments:
Power point with labview.zip ‏187 KB

Similar Messages

Unable to extract data from an AS/400 system.

Hello experts.
We are trying to extract data from an AS/400 system but not having any success until now.
I´ll write down you the stepts that we have followed until now:
1.- Create a DB Connect between both systems
2.- Create a Source System from AS400 in the workbench under DB Connect Directory
3.- Generate datasources from tebles specified in the schema of the connection
break point -
At this point, we had a problem with some tables with at least one fieldname containing character "Ñ".
After asking some possible solutions to SAP, the told us this is not supported, as the system can´t have any object with character "Ñ", so the transfer structure was unable to activate with this fields in the datasource.
--- end of brek point --
4.- After those issues, we´ve decided to implement, in another schema, views from those tables which had the fieldnames with that character "Ñ", changing them to an "N".
5.- We´ve created another source system with that schema, and user than can see that schema.
6.- To be able to see those views, in transaction RSDBC, we had to deactivate the two checkboxes in the first window ( Choose tables and Choose views) .
7.- Right afeter, we could generate correctly the datasources from this logical tables.
8.- We have designed the hole dataflow for this datasources and everithing went rigth.
9.- But wen we tried to execute the infopackage to extract data from those logic tables, we cannot get any registers. Acctualy the charge remains yellow after the job have finished.
Please, I would appreciate any help you could give us on this problem.
Thank you very much
Regards
Joaquin

I´d like ti add something to this thread, and maybe clarify a littel bit the question.
The only way that the BW system recognizes those logical tables, through transaction RSDBC is checking out the two boxes on this transaction, "Select Tables" and "Select Views".
I don´t know haw these logical tables have been created, bus does this mean that the are not neither tables or views as BW understand them.
Please, if someone knows anythin about this, answer to this thread.
Thank you very much.
Joaquin Sobrido

How to extract data from 12 tables ?

Hi experts,
I want to extract data from 12 tables into bi.
How can we do this. And also can we extract some fields from
a structure?
Full points will be assigned.
Regards,
V N.

Hi,
First you need to check if the tables are standard tables or custom tables. If they are standard tables check which extractors are using those tables.
If they are not being used by any of the standard extractors then you you need to create generic datasource for the same. The same hold true for custom tables as well. For custom tables, you'll need to create generic datasource. If you search the forum for generic datasources you'll get a lot of information.
Its very important that you understand the table relationships, data volumes, if delta is possible or not, data granularity, etc for your datasource design.
Cheers,
Kedar

How to extract data from Chart History?

Dear all, I have read a lot of posts, but still don't understand how to extract data from Chart history.
Suppose you acquired 1024 points of data every time, then use "build array" to build an array, then send to intensity chart to show, then save the history into a .txt file, but how to extact data from the file?
How Labview store the data in the 2D history buffer?
Anybody has any examples?

The simplest would be to save the 2D array as a spreadsheet file, the read it back the same way.
Maybe the attached simple example can give you some ideas (LabVIEW 7.1). Just run it. At any time, press "write to file". At any later time, you can read the save data into the second history chart.
If you are worried about performance, it might be better to use binary files, but it will be a little more complicated. See how far you get.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
IntensityChartHistorySave.vi ‏79 KB

How to extract data from ODS to non-SAP system

Hi,
Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
The non-SAP system is an unix system.
Thanks in advance
Ella

Ella,
You can look at it from the concept of a BADI / Infospoke
Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
Hope this helps...
Arun
Assign points if it helps

Error While extracting data from FIAA and FIAP

Hi Gurus,
I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
Ther Error is as follows:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Kindly help. Your points are assured.
Thanks and Regards
Prasad

Hello Prasad,
Have you already checked what happened in the source system ?
You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
It could be a clue of what happened in R/3.
Let us know,
Regards,
Mickael

How to Extract Data From Lotus Notes in BI 7.0

Hi,
I need to <b>Extract Data From Lotus Notes</b>.
Is it possible to create source system For Lotus Notes (Like we creating For R/3,Oracle,Flat Files etc) then we can Extract the Data ! or
I need to Download the Data in .csv File then Extract the Data !
really appreciate your comments and surely you can get points too...
Thanks in advance
prasanna

Hi,
What type of data do you want to extract from lotusnotes. .?
regards,
Mohan

Extract data from Dynamic Table in Pdf

Hi,all
How can I extract data from dynamically created table(the rows are added/removed by user in offline scenario) in pdf form?
Regards,
Michael

Hi Micheal,
I have a scenario which is similar as yours.I want to extract table data from the offline form.when i extract data i am getting values only for first row of the table.Can u please guide me how to fetch the data for a table(this table also has dynamically increasing rows in offline).I need the solution urgently.Please help me on this.
WIll reward points for sure.
Thanks and Regards,
Srividya.

Hi i am new to labview. i want to extract data from a text file and display it on the front panel. how do i proceed??

Hi i am new to labview
I want to extract data from a text file and display it on the front panel.
How do i proceed??
I have attached a file for your brief idea...
Attachments:
extract.jpg ‏3797 KB

RoopeshV wrote:
Hi,
The below code shows how to read from txt file and display in the perticular fields.
Why have you used waveform?
Regards,
Roopesh
There are so many things wrong with this VI, I'm not even sure where to start.
Hard-coding paths that point to your user folder on the block diagram. What if somebody else tries to run it? They'll get an error. What if somebody tries to run this on Windows 7? They'll get an error. What if somebody tries to run this on a Mac or Linux? They'll get an error.
Not using Read From Spreadsheet File.
Use of local variables to populate an array.
Cannot insert values into an empty array.
What if there's a line missing from the text file? Now your data will not line up. Your case structure does handle this.
Also, how does this answer the poster's question?

Performance issue while extracting data from non-APPS schema tables.

Hi,
I have developed an ODBC application to extract data from Oracle E-Business Suite 12 tables.
e.g. I am trying to extract data from HZ_IMP_PARTIES_INT table of Receivables application(Table is in "AR" database schema) using this ODBC application.
The performance of extraction (i.e. number of rows extracted per second) is very low if the table belongs to non-APPS schema. (e.g. HZ_IMP_PARTIES_INT belongs to "AR" database schema)
Now if I create same table (HZ_IMP_PARTIES_INT) with same data in "APPS" schema, the performance of extraction improves a lot. (i.e. the number of rows extracted per second increases a lot) with the same ODBC application.
The "APPS" user is used to connect to the database in both scenarios.
Also note that my ODBC application creates multiple threads and each thread creates its own connection to the database. Each thread extract different data using SQL filter condition.
So, my question is:
Is APPS schema optimized for any data extraction?
I will really appreciate any pointer on this.
Thanks,
Rohit.

Hi,
Is APPS schema optimized for any data extraction? I would say NO as data extraction performance should be the same for all schemas. Do you run "Gather Schema Statistics" concurrent program for ALL schemas on regular basis?
Regards,
Hussein

Extract data from a scanned PDF Chart

Hi,
I have a scanned PDF chart, which shows linear relationship between two variables. Is there a way to extract data from the scanned PDF using Acrobat?
I want to avoid error in my calculations by eyeballing the data. Using "Measuring tool" may be an option, but wanted to ask whether any forum members have a better and efficient way to extract data, which can later be used in a spreadsheet software.
As an example, please refer to the attached link, I will like to extract data from Figure 6 in this document: http://www.seas.columbia.edu/earth/wtert/sofos/nawtec/nawtec13/nawtec13-3164.pdf
FYI, I have Acrobat X installed on my Windows computer.
Thanks in advance for your help.

Using AA9 Pro I was able to use the TouchUp Object Tool, right click and open the graph in Photoshop. From there, or Paint and another image editor, one might be able to clean it up or re-create the paths. The gray values are too close for it to be simple.
The measure tool does not seem a good choice; although you see measurement lines, it would not actually produce the line you desire, until maybe, just maybe you flattened annotations, a feature within Fixups, perhaps limited to the Professional version.
IMO, it is a fairly linear graph with only a variation at the 10 Power (MW). You eyeball is as good as mine at this one; the actual values may be available from the authoring entity.

Regarding Extracting Data from SAP CRM

Hi,
1) What are steps to extract data fron SAP CRM? I heared that we get different types of errors while extracting data from SAP CRm to BW when compared to BW
2) From which tables BW system is getting data when we extract data from SAP CRM Lead management, Opportunities, Activities and CIC?
Can anybody please let me know the answers for these ..........
Thanks in Advance,
Sowji
[email protected]

Hi Sowjanya,
Pls ch this link:
regarding bw crm extraction
CRM extraction
CRM Extraction
http://help.sap.com/saphelp_nw2004s/helpdata/en/be/92fb3b28904f73e10000000a114084/frameset.htm
http://help.sap.com/bp_biv335/BI_EN/html/BW/SalesAnalysis.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f2910623-0c01-0010-de8f-d1926988a986
http://help.sap.com/bp_biv135/html/bw.htm
http://help.sap.com/bp_biv135/html/BW/SalesAnalysis.htm
http://help.sap.com/bp_biv235/BI_EN/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
http://help.sap.com/bp_biv235/BI_EN/index.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
http://help.sap.com/bp_biv235/BI_EN/html/BW/CRMAnalytics.htm
http://help.sap.com/saphelp_crm50/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
Steps:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
Datasources used in CRM-BW extraction are:
0crm_sales_act_1,
0BBP_STSMA_TEXT
0CRMFOCST_TEXT
0CRM_ACCPLN_ATTR
0CRM_ACCPLN_TEXT
0CRM_BILL_BLCK_TEXT
0CRM_CANC_PARTY_TEX
0CRM_CANRSN_TEXT
0CRM_CATEGORY_ATTR
0CRM_CATEGORY_TEXT
0CRM_CLASS_TEXT
0CRM_DECOTP_TEXT
0CRM_DECO_TEXT
0CRM_DIRECT_TXT
0CRM_ECROPT_TEXT
0CRM_FINCLASS_TEXT
0CRM_ITM_OBJ_TYPE_T
0CRM_ITM_TYPE_TEXT
0CRM_JRGUID_TEXT
0CRM_OBJ_TYPE_TEXT
0CRM_OPGUID_TEXT
There many more!
Check the datasources in rsa6 of crm system under CRM node. Documentation is available in SAP help.
*pls search SDN For more info*
*pls assign points if info is useful*
Regards
CSM reddy

How to extract data from MS-Access

Hi Experts,
I have a scenario where I have to extract data from MS-Access.
I'm developing a ABAP component.
I looking for help in writing query for data extraction. I have no idea of extracting data form MS-Access.
Have worked on BAPI and SAP tables to extract data but not in MS-Access.
Can anyone help me out to pull data from MS-Access and use those data in ABAP?
Thanks in advance,
suba

Hi Sushma,
how to configure sendor JDBC adapter ..
Select adapter type is JDBC..
Give the Transport Protocol:.JDBC 2.0 (Example)............
Message Protocol:...JDBC...........
IAdapter Engine : Integration Server
Processing Parameters..
Quality of service.....(Example)..Exactly once
Poll Interval .... Example ..10
Query Sql statement..Example ..select * from XXXXX
Document Name.....
Update Sql stetement.....
Thanks,
Satya
Reward points if it id useful...

Problems in extracting data from r/3

Hi Guys
I am extracting data from r/3(QA) to BW(QA), into an ODS. Now, my previous load failed but i saw from RSMO that the load had more than 4 million records. I am scheduled the load again. And in monitor(RSMO) it says:
(yellow symbol) 17:24:50 ( 762040 From 0 Records )
and in status, it says everything ok, no error, process is still goin on. And in details this is the last line at the moment:
"Transfer (IDocs and TRFC): Missing messages or warnings"
Data Package 29 : arrived in BW ; Processing : Selected number does not agree with transferred n
"Processing (data packet): Warning received"
Data Package 29 ( 23810 Records ) : Everything OK.
I am assuming that there are 100 packages like this in total. Will my data load into the ODS finally??
Thanks.

Hi Chintai,
If you are extracting delta records, then you can view the number of records in RSA7.
I suggest you go to details tab of the monitor, you would be knowing the activites that are taking place..
Check if your transfer rules, update rules are done for atleast for few of the data packages.
Regards
Manga(Assign points)

Extracting data from sap to java application using JCO

Hi,
I am new to sap and wanted to know what is the procedure to extract data from based on the java application client (user defined input from different tables of sap) input and need to manage huge data meaning reading millions of records.kindly help me how to handle this in ABAP.

Hi,
Pls chk these links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ad09cd07-0a01-0010-93a9-933e247d3ba4
Accessing SAP Tables from a Java application
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/47b6cd90-0201-0010-5aba-b6b7474d4aff
Java Application ,SAP BW
<b>***Reward Points if Useful</b>
Regards
Gokul

Extracting data from Ms power point ?

Similar Messages

Maybe you are looking for