Extracting .INF files from drivers for Windows MDT

Hello,
Sorry if this is the wrong forum. There were about fifty categories and about 500 subcategories and I got tired of searching for the right forum.
I'm trying to extract a INF file from a driver. I've tried 7zip, Winrar, and some extraction tool everyone said would work. It didn't.
Drivers are here:
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?DocID=HT073832
and here:
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?DocID=HT073832
Anyone have a solution?

Hi
I found this tip:
Someone wrote this:
+You have to run the installer, wait for it to get to the first point where you click Next to continue, and then leave it sitting there. Go into your system's Temp and find the particular one with the installation files inside it that were extracted, then copy it someplace, go back to the installer and cancel it.+
You could also try this freeware application to extract the package:
http://www.legroom.net/software/uniextract

Similar Messages

No luck trying to extract .inf files from drivers downloaded as zip files

Hi,
I am trying to extract .inf files from drivers downloaded as zip files from the Toshiba website, but I'm having no luck.
I am trying to deploy images using WDS on server 2008 and need the inf files for this to succeed, does anyone have the answer to this problem.
thanks in advance.

Hi
I found this tip:
Someone wrote this:
+You have to run the installer, wait for it to get to the first point where you click Next to continue, and then leave it sitting there. Go into your system's Temp and find the particular one with the installation files inside it that were extracted, then copy it someplace, go back to the installer and cancel it.+
You could also try this freeware application to extract the package:
http://www.legroom.net/software/uniextract

Drivers for Windows XP - cannot connect wirelessly in XP, no driver files.

Can someone please provide the Drivers for Antheros wireless adapter on the MacBook?
I've gone back and re-downloaded Bootcamp, created another Drivers for Windows XP CD and when I go to install the Drivers in XP I receive an error message: 1706 No valid source could be found for peoduct Macintiosh Drivers for Windows XP.
When I open the CD directory I see nothing but documentation files.
Thx.

Have you installed Bootcamp Drivers for your specific Mac?
Please see Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support for appropriate drivers.

I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

X-Fi drivers for Windows 7

Is there any chance Creative would release 64-bit X-Fi drivers for Windows 7 ? And preferably user mode drivers, if those are still available for Windows 7.
Thanks.

The downloads from this?link that you've posted don't work:
http://forums.creative.com/creativel...thread.id=3525
What I was able to download was a self-extracting .exe and the contents had no setup application that I could run. Other than that, the readme file from that extract said it was for Xtreme Audio.

Drivers for Windows Vista 64-bit on Satellite L300-1AM

When I can get drivers for Windows Vista 64-bit? Or I need to intall 32-bit drivers on my 64-bit Vista operating system?
Please links ;)

[Toshiba - Download Drivers|http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
In the Drivers Search Page (the link above) select these filters:
_Product type:_ +Notebook+
_Family:_ +Satellite+
_Product Series:_ +Satellite A Series+ (don't try the L series if you want to find anything useful)
_Operating System:_ +Windows Vista 64 Bit+
_Country:_ +World Wide+ (you have to select this in order to get rid of those multiple country options available for the modem)
_Language:_ +English+ (obviously)
Don't modify any other filter. The results will be about 100 (maybe more, but the site is set to show up to 100 results).
Advices:
1. Download the latest versions only (there's no point in downloading multiple versions of the same driver, yet they will be shown in the search results area)
2. Download what's specific to your laptop only (network - RealTek, both wired and wireless; chipset and graphics - Intel; modem - Toshiba; webcam - Chicony; there's no point in downloading anything from otehr vendors - except maybe the touchpad, but Windows can handle it properly without aditional drivers)
3. Don't download any BIOS or Firmware file; they might not be for your notebook, and installing the wrong ones is a sure path to screwing up your notebook (and losing the warranty); if you need them upgraded, go to the download page for your specific model, Windows XP or Windows Vista 32 Bit drivers (since they are OS independent anyway)
Toshiba utilities (DVD Player, ConfigFree, etc.) should be OK too (again, download the latest version only).
BTW, I own 2 Toshiba notebooks (L300-1AM and L300-1AN; quite similar, the differences are in HDD and CPU only) and I had the same problem: no 64-bit drivers (and the same "support"). Quite strange the idea that Toshiba is testing these 64-bit drivers before releasing them (according to a previous post), since the same drivers, for the very same chipsets - but installed on other models - are available. Windows Vista 64-bit is out on the market for nearly 2 years now, the production of these models has already been stopped (and I assume they have not been produced during one night only :) ), yet they had no time to test the drivers... High-class support from Toshiba!

Installing 186.81 Nvidia Drivers for Windows 7 64-bit on Lenovo Laptops 2700M/3700M NVS140M

UPDATE: I removed old 186.03 info and replaced with new driver info. Also I changed the device ID for the 3700m becasue it was not correct. I finally got a w700ds to test it on. Removed pre-edited INF files becsue they are no longer valid.
Here are some instructions on how to get the Nvidia drivers installed instead of waiting for Lenovo to update theirs. I take no responsibility if you break anything. I am a tinkerer and not a expert. It is working fine for me on a w700 with a 2700m. The NVS140M section may not work I have no means to test it. Let me know if you do it and it works fine. This should also technically work for Vista 64-bit.
1. Go tohttp://www.nvidia.com/object/notebook_winvista_win7_x64_186.81_whql.html and download the drivers.
2. Run the install package. It will fail to install but it will extract the drivers to C:\NVIDIA\DisplayDriver\186.81\International\Display
3. Using the below information to edit the appropriate INF files. Just open them with Notepad. There will be 2 instances of each line you need to replace.
2700M/3700M
Edit the NVBL.INF file.
Search for:
%NVIDIA_DEV.061E.01% = Section009, PCI\VEN_10DE&DEV_061E&SUBSYS_0539103C
%NVIDIA_DEV.063A.01% = Section009, PCI\VEN_10DE&DEV_063A&SUBSYS_30EC103C
Replace with:
%NVIDIA_DEV.061E.01% = Section009, PCI\VEN_10DE&DEV_061E&SUBSYS_212517AA
%NVIDIA_DEV.063A.01% = Section009, PCI\VEN_10DE&DEV_063A&SUBSYS_211917AA
NVS140M
Edit the NVDM.INF file.
Search for:
%NVIDIA_DEV.0429.01% = Section002, PCI\VEN_10DE&DEV_0429&SUBSYS_01FE1028
Replace with:
%NVIDIA_DEV.0429.01% = Section002, PCI\VEN_10DE&DEV_0429&SUBSYS_20D817AA
5. Save the file and run the Setup.exe in the same directory. It should install fine.

To simplify things for NVS 140M users:
Download this file
Replace the copy included with installer in the 'Display' folder
Run setup.exe
This file includes the fix mentioned in the original post, as well as a registry entry for enabling brightness controls, as they didn't work for me with the nVidia drivers.
-tm

I have to extract all files from a hard drive of a macbook pro that is no longer working. All I have to access the hard drive is a PC, is this possible, and if so how?

I have to extract all files from a hard drive of a macbook pro that is no longer working. All I have to access the hard drive is a PC, is this possible, and if so how?

You could try Paragon HFS+ for Windows. That would allow you to read and write files from a Mac-formatted drive.
Clinton

Batch file extracting all files from nested archives

I have managed to leverage a powerful
forfiles command line utility with the mighty
7z compression program.
Below is a simple batch file extracting all files from nested archives hidden at any depth inside other archives and/or folders. After the extraction each archive file turns into a folder having the archive file name. If, for example, there was an "outer.rar"
archive file containing nothing but an "inner.zip" archive with only "afile.txt" inside, "outer.rar" becomes "...\outer.rar\inner.zip\afile.txt" file system path.
@echo off
rem extract_nested_archives.bat
move %1 "%TMP%"\%2
md %2
7z x -o%1 -y %TMP%\%2
del "%TMP%"\%2
for %%a in (zip rar jar z bz2 gz gzip tgz tar lha iso wim cab rpm deb) do forfiles /P %1 /S /M *.%%a /C "cmd /c if @isdir==FALSE extract_nested_archives.bat @path @file"
ARCHIVES ARE DELETED DURING THE EXTRACTION! Make a copy before running the script!
"7z.exe" and "extract_nested_archives.bat" should be in folders available via the %PATH% environment variable.
The first parameter of extract_nested_archives.bat is the full path name of the archive or folder that should be fully expanded; the second parameter is just the archive or folder name without the path. So you should run "c:\temp\extract_nested_archives.bat
c:\temp\outer.rar outer.rar" from the command line to completely expand "outer.rar". "c:\temp" must be the current folder.
Best regards, 0x000000AF

Incredibly useful! Thank you so much. I did make a couple of small changes to make the script a little easier to use from the end-user perspective.
First - I don't like making the user input the redundant second parameter, so I added this snippet which extracts it from the first parameter. The first line of the snippet enables delayed expansion so that special characters in our file name don't
break anything. The second line pulls the parameter into a variable, and the 3rd line uses delayed expansion on that new variable. Before implementing delayed expansion I had problems with file paths which included parentheses.
SetLocal EnableDelayedExpansion
Set SOURCE=%1
For %%Z in (!source!) do (
set FILENAME=%%~nxZ
set FILENAME=%FILENAME:"=%
Anyway once that was done, I just used %FILENAME% everywhere in the script instead of
%2 (making sure to correct quotes as needed)
This way, to run my script all you need to run is:
C:\temp\extract_nested_archives.bat C:\temp\Archive.zip
Second - I didn't want to modify the Windows environment variable. So I replaced
7z with "%PROGRAMFILES%\7-zip\7z.exe"
I also replaced extract_nested_archives.bat with "%~f0" (which represents the full path+filename of the current script).
Here is my full script now. Tested on Windows 8 with the 64-bit version of 7-zip installed:
@echo off
Setlocal EnableDelayedExpansion
Set source=%1
For %%Z in (!source!) do (
set FILENAME=%%~nxZ
set FILENAME=%FILENAME:"=%
move /Y %1 "%TMP%\%FILENAME%"
md "%FILENAME%"
"%PROGRAMFILES%\7-zip\7z.exe" x -o%1 -y "%TMP%\%FILENAME%"
DEL "%TMP%\%FILENAME%"
for %%a in (zip rar jar z bz2 gz gzip tgz tar lha iso wim cab rpm deb) do (
forfiles /P %1 /S /M *.%%a /C "cmd /c if @isdir==FALSE "%~f0" @path @file"

How to extract single file from multipart zip archives?

Hello,
I have a 10 parts of zip files that contains single file. When I extracted these, each program taking an action seperatly to each parts and gave me 10 files in a different folders. In a Windows, it is so simple. Winzip,winrar automaticaly discovering that are the parts of a single file and give me that.
My question is simple: How to extract single file from a multipart zip/rar archives ?
I know a way in "Terminal" but it is not comfortable for big parts.

I tried with UnArchiver but it extracted each file seperately like showen in a photo

I'm trying to extract audio files from my OLYMPUS Digital Voice Recorder VN-6200PC I am getting this error whenever I try to play its file type on my MacBook Pro,"The document "VN622195.WMA" could not be opened. The movie's file format isn't recognized."

I'm trying to extract audio files from my OLYMPUS Digital Voice Recorder VN-6200PC
I am getting this error whenever I try to play its file type on my MacBook Pro,"The document “VN622195.WMA” could not be opened. The movie's file format isn't recognized."

The mac has no native way to read .wma files (these are Windows Media Audio files). Do a search on the internet for playing wma files on a mac. You will find several links to solution (one is to use flip4mac).

Cannot get Boot Camp drivers (for Windows XP) installed

I've partitioned my Time Machine HD for the 32GB/FAT format of Windows XP/Home Edition w/SP2. The installation of Windows proceeded OK. However, after installing Windows, ejecting the W-Install disc, and inserting my MAC OS X Leopard disc, the "setup.exe" file does not open. If I start up in Windows, I cannot open the Opt. Disc drawer since the BC drivers are not installed; if I insert the OS X disc in the drawer, then restart in Windows, the "setup.exe." file does not open.
Where do I go from here to install the Boot Camp drivers for Windows? These drivers are needed for 'normal' Windows operation, and are required in order to install the Boot Camp update. Any suggestions would be appreciated.

Hi David,
while you are in Windows and have the Leopard DVD inserted, can you access the content of it using the Windows Explorer ?
or maybe this hint on MacOSXHints can help you access the Windows Content of your Leopard DVD while in OSX http://www.macosxhints.com/article.php?story=20080708145453136
If so, you can try to copy the Windows Content onto a USB Memory Stick and use it to install the drivers.
Good Luck
Stefan

HP ZR2740w drivers for Windows 8.1 x64

Where can I find the drivers for windows 8.1 for this monitor?
Please note that the Win7 x64 drivers are not accepted by Win8.1 x64.
Adding it as legacy hardware with the INF provided by the Win7 install program doesn't work either.
Please help! I bought these two monitors just a year ago and now they're useless already!

Hey there. I'm also looking for the same. Was there ever anything released?
Thanks!

Re: HP 15-d053sr drivers for Windows 7 x64 not installed

Hello!
I have the same problem!!!
Notebook HP 15-d053sr, Product No. F7R72EA#ACB, Serial No. [edited by Moderator], Bios Version F.11
On clean install Windows 7 x64, Can't install all Chipsets, USB 3.0 and Video drivers! Error message: "This computer does not meet the minimum requirements for installing the software"
On clean install Windows 8.1 x64 Can't install "IMEI" (sp64344) driver and maybe more!
HP Support Assistant find only 4 drivers (Atheros Bluetooth, Wireless LAN, Synaptics TouchPad and Realtek Audio drivers)...
Need working, supported, compatible drivers for Windows 7 x64!
Please HELP!!!

Hi @Ainars_LV ,
Thank you for visiting the HP Support Forums. I'm sorry to inform you that your post has needed some editing to remove personal information such as the Serial Number in your Post. From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

HP PSC 1400 Drivers for windows 7 Professional X64 (bit) problem

I have downloaded full printer software and drivers for Windows 7 Professional 64-bit from HP site- but nothing so far has worked I have tried several times, neither i can locate any driver that will work for it, even after attempting to install from the HP program listed for my OS and this printer.Every time at the end of installation it installation stuck at a message configuring printer and it keep saying that for hours and do not finish. Finally I had to terminate the process manually to get out of it! Please Please Please help!

Suhail wrote:
I have downloaded full printer software and drivers for Windows 7 Professional 64-bit from HP site- but nothing so far has worked I have tried several times, neither i can locate any driver that will work for it, even after attempting to install from the HP program listed for my OS and this printer.Every time at the end of installation it installation stuck at a message configuring printer and it keep saying that for hours and do not finish. Finally I had to terminate the process manually to get out of it! Please Please Please help!Which PSC 1400 are you using? There a few different models: HP PSC 1402 All-in-One PrinterHP PSC 1410v All-in-One PrinterHP PSC 1410xi All-in-One PrinterHP PSC 1417 All-in-One PrinterLet me know which one so I can get you the proper download.Thanks,Sean

Extracting .INF files from drivers for Windows MDT

Similar Messages

Maybe you are looking for