Extracting User Status for Sales Orders

I am trying to extract user status transactional data for sales orders (at both the header and item level).  I have been following SAP note 300300 to configure the status extractors and map the BW objects to sales order status data sources (2LIS_11_VASTH & 2LIS_11_VASTI).  I think I have set up both R/3 and BW correctly according to note 300300 and the IMG documentation, but I am not getting any values in the info source for the new user status info objects, when I run the extract.
Has anyone successfully done this?  If so, do you have any documentation or pointers on how I can get this to work?  Or, am I better off creating a generic extractor?  Thanks for your consideration.
Sincerely, Hashi Chakravarty

Hello Ravi,
well yes, I can derive the status for that order in the update rules if i show the status as an attribute of the 0pm_order; but basically there will be only the last status shown.
My problem:
a. i report on day 1, the status of the order is REL
b. on day 2 i load the master data for the orders, new status is TECO
c. on day three i want to report in the past and see the status of day 1; that's not possible in this scenario because i'll see the current status (TECO).
So that's why I want to have the statuses in the cube...
The 2lis_17_i3hdr extractor is only sensitive to CRT and TECO statuses, but not to the others (like REL / BLC and so on... :_(( )
I could read the statuses from the JEST and TJ02T tables...but still, if a document status is changed, no delta record is written in the queue...
Thanks,
Tudor

Similar Messages

  • How to extract User status for Sales and purchase contracts

    Hello,
    We need to load the User status linked to sales and purchase contract.
    I think that there is no datasource in BI content.
    What is the better solution ?
    - Enhance a standard datasource like 2LIS_11_VASTH with a status field (This solution is not ok for Purchase contract)
    - Create a spécific datasource to extract this status
    - Others
    Thanks for your help
    Best regards
    Christophe

    Hi,
    In your scenario its better to use generic extractor to get the reqd data. This data can than be stored in a DSO on the BI side.
    And you can look up for the user status using a routine .
    Regards,
    Rahul

  • What are the User Exits for Sales Order creation process?

    Hi,
    what are the User Exits for Sales Order creation process? how can I find them?
    thanks in advance,
    will reward,
    Mindaugas

    Please check this info:
    User Exits In Sales Document Processing
    This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
    Involved program components
    System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
    MV45ATZZ
    For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
    MV45AOZZ
    For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
    MV45AIZZ
    For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
    MV45AFZZ and MV45EFZ1
    For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
    User exits in the program MV45AFZZ
    The user exits which you can use for modifications in sales document processing are listed below.
    USEREXIT_DELETE_DOCUMENT
    This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
    For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
    The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
    USEREXIT_FIELD_MODIFICATION
    This user exit can be used to modify the attributes of the screen fields.
    To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
    The usage of the field groups (modification group 1-4) is as follows:
    Modification group 1: Automatic modification with transaction MFAW
    Modification group 2: It contains 'LOO' for step loop fields
    Modification group 3: For modifications which depend on check tables or on other fixed information
    Modification group 4: is not used
    The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
    This FORM routine is called up by the module FELDAUSWAHL.
    See the Screen Painter manual for further information on structuring the interface.
    USEREXIT_MOVE_FIELD_TO_VBAK
    Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBAP
    Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
    The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBEP
    Use this user exit to assign values to new fields at the level of the sales document schedule lines.
    The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
    USEREXIT_MOVE_FIELD_TO_VBKD
    Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
    The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
    USEREXIT_NUMBER_RANGE
    Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
    The user exit is called up in the FORM routine BELEG_SICHERN.
    USEREXIT_PRICING_PREPARE_TKOMK
    Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
    USEREXIT_PRICING_PREPARE_TKOMP
    Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
    USEREXIT_READ_DOCUMENT
    You use this user exit if further additional tables are to be read when importing TA01 or TA02.
    The user exit is called up at the end of the FORM routine BELEG_LESEN.
    USEREXIT_SAVE_DOCUMENT
    Use this user exit to fill user-specific statistics update tables.
    The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
    Note
    If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
    USEREXIT_SAVE_DOCUMENT_PREPARE
    Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
    The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
    User exits in the program MV45AFZA
    USEREXIT_MOVE_FIELD_TO_KOMKD
    Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMPD
    Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
    USEREXIT_MOVE_FIELD_TO_KOMKG
    Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_MOVE_FIELD_TO_KOMPG
    Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
    USEREXIT_REFRESH_DOCUMENT
    With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
    For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
    The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
    The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
    User-Exits in program MV45AFZB
    USEREXIT_CHECK_XVBAP_FOR_DELET
    In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
    USEREXIT_CHECK_XVBEP_FOR_DELET
    In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
    USEREXIT_CHECK_VBAK
    This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
    USEREXIT_CHECK_VBAP
    This user exit can be used to carry out additional checks (e.g. for completion) at item level.
    USEREXIT_CHECK_VBKD
    The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
    USEREXIT_CHECK_VBEP
    This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
    USEREXIT_CHECK_VBSN
    You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
    USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
    USEREXIT_FILL_VBAP_FROM_HVBAP
    You can use this user exit to fill additional fields in the sub-item with data from the main item.
    USEREXIT_MOVE_FIELD_TO_TVCOM_H
    You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    USEREXIT_MOVE_FIELD_TO_TVCOM_I
    You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
    User-Exits for product allocation:
    The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
    USEREXIT_MOVE_FIELD_TO_COBL
    Option to include new fields in structure COBL.
    USEREXIT_COBL_RECEIVE_VBAK
    Option to assign values from the document header to the new fields.
    USEREXIT_COBL_RECEIVE_VBAP
    Option to supply values from the item to the new fields.
    USEREXIT_COBL_SEND_ITEM
    A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
    USEREXIT_COBL_SEND_HEADER
    A changed field can be copied from the structure to the header (see source text MV45AFZB)
    USEREXIT_SOURCE_DETERMINATION
    You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
    USEREXIT_MOVE_FIELD_TO_ME_REQ
    With this user exit you can include additional fields for the following fields:
    EBAN (purchase requisition)
    EBKN (purchase requisition-account assignment)
    USEREXIT_GET_FIELD_FROM_SDCOM
    Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
    USEREXIT_MOVE_WORKAREA_TO_SDWA
    You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
    User-Exits for first data transfer:
    The following user exits can only be used for the first data transfer.
    Note
    Only use the user exits if the names/fields do NOT have the same name.
    USEREXIT_MOVE_FIELD_TO_VBAKKOM
    Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
    USEREXIT_MOVE_FIELD_TO_VBAPKOM
    Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
    USEREXIT_MOVE_FIELD_TO_VBEPKOM
    Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
    USEREXIT_MOVE_FIELD_TO_VBSN
    You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
    USEREXIT_MOVE_FIELD_TO_KOMKH
    You can use this user exit to include new fields for batch determination (document header).
    USEREXIT_MOVE_FIELD_TO_KOMPH
    You can use this user exit to include new fields for batch determination (document item).
    USEREXIT_CUST_MATERIAL_READ
    You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
    USEREXIT_NEW_PRICING_VBAP
    Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
    USEREXIT_NEW_PRICING_VBKD
    Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
    User-Exits in Program MV45AFZD
    USEREXIT_CONFIG_DATE_EXPLOSION
    The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
    User exits in the program FV45EFZ1
    USEREXIT_CHANGE_SALES_ORDER
    In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
    If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
    User-Exits in Program RV45PFZA
    USEREXIT_SET_STATUS_VBUK
    In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
    The following workareas are available for this user exit:
    VBUK (header status)
    FXVBUP (item status)
    FXVBUV (Incompletion)
    USEREXIT_SET_STATUS_VBUP
    In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
    The following workareas are available for this user exit:
    FXVBAP (Item data)
    FXVBAPF (Dynamic part of order item flow)
    FXVBUV (Incompletion)
    USEREXIT_STATUS_VBUK_INVOICE
    You can use this user exit to influence billing status at header level.
    User exits in the screens
    Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
    Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
    For field transports, you do not have to make changes or adjustments.
    Example
    A new field, VBAK-ZZKUN, should be included in table VBAK.
    If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
    User Exits in Program MV45AFZ4
    USEREXIT_MOVE_FIELD_TO_KOMK
    You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
    USEREXIT_MOVE_FIELD_TO_KOMP
    You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
    User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
    EXIT_SAPFV45P_001
    You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
    Regards
    Eswar

  • Remove the user status in Sales order

    how to remove the user status in sales order header? could you give the function module or BAPI to get this?

    Hi,
    You Can try this-
    BAPI_SALESORDER_CHANGE,
    FM 'I_CHANGE_STATUS'
    Regards,
    Sujit

  • How to Set User Status of Sales Order at item level.

    How to Set User Status of Sales Order at item level by default to 'Purchase Req Not Created' (example)while creating order. Please tell EXIT Name to be triggered & Internal table to be populated.
    Thanx,
    Srini
    Moderator message: please do your own research before asking.
    Edited by: Thomas Zloch on Feb 21, 2011 11:19 AM

    Mathew,
    Here is a document that should help you get started on enhancing 2LIS_11*
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09d5356-d8c4-2d10-8b84-d24723fc1f0a?QuickLink=index&overridelayout=true
    Good luck!

  • Activation of User status for Prod. order

    Hi,
    I have created a status profile with a status as a user status for production order. Now the thing is how to activate this user status for a specific transaction.
    the requirement is after settlement the user status should get activated for production order.
    Regards
    Amit Parkhi

    Hi Amit,
    As told by Ajay , after assigning Status Profile in OPJH you can assign User Status to production order as below:
    Pls. go through the following procedure for activating the User Status :
    Activating User Statuses
    Use
    You can activate a user status at order header and at operation level.
    Procedure
    Order Header Level
    Go to the order header.
    Choose .
    Choose Edit ® Direct entry.
    The system displays a dialog box in which you can select the permitted user statuses.
    Position the cursor on the required user status and choose Choose .
    Operation Level
    Go to the operation overview.
    Select the operation in question.
    Choose .
    Choose Edit ® Direct entry.
    The system displays a dialog box in which you can select the permitted user statuses.
    Position the cursor on the required user status and choose Choose .
    Pls. follow the above procedure as per rquirement and set user status accodingly.
    Pls. revert if any doubt and reward if useful.
    Regards,
    Tejas
    Edited by: Tejas  Pujara on Jun 23, 2008 8:10 AM
    Edited by: Tejas  Pujara on Jun 23, 2008 8:11 AM

  • User Status for process orders

    Dear Experts,
    We are using user statuses for process orders & with this we are resricting or allowing certain business transactions.
    My question is can we automatically set the two consecutive user statuses ?
    Means when the GR for process order is done i have set the user status as GR.
    Next user status is CLSD.
    So after completing the closing of process order by settlement transactions can i set the staus as CLSD automatic?
    I am trying to do it but i am getting error as-
    "Status CLSD is not allowed (ACT 30000292 0010)"
    Your help is highly appriciated
    Regards
    Vivek

    Hi,
    1) Still your order is carrying cost, it has not settled properly
    2) you can check in CO02 itself, Go to tool bar at top
    3) here Go to > Costs > Analysis & check whether order is set to Zero
    4) you can check in KKBC_ORD also
    Also, pls refer below link
    Re: HOW automatic order status change to CLSD
    regards,
    Sankaran

  • User Status for PM Order

    Hi everybody,
    I have created a user status for PM orders. the problem is when Order status in CNF ( confirmed ) and I use IW45 to cancel confirmation, the user status doesn't change to Release and still remain CNF. I couldn't find any business transaction for that.
    what do you do for such case?
    thanks in advance

    Hi Daniel,
    I doubt that some communication gap is going on.
    System Status
    - An Order with status TECO CNF ... converts to REL CNF ...  when the TECO cancels.
    - This status further changes to REL PCNF when you cancel any Operation Confirmation (IW45).
    - Similarly  TECO PCNF  also possible.
    If I remember correctly, you were asking about User Status trigger upon change of System Status,
    If you agree with the very 1st line of this post, you may start a fresh by explaining the requirements again, if possible more clearly. The probability for fresh thinking and responding from forum would increase.
    Best wishes
    Jogeswara Rao K

  • Cannot extract user statuses for Opportunity items

    Hi,
    Standard SAP Extractor does not extract User statuses for the Opportunity Items, Data Source name 0CRM_OPPT_I for 0CRM_C04 icube.
    According the OSS note We have to prepare our own enhancement of the extract structure to include the mapping of the user status group.
    We extended the related structure. There is no problem with this. We need a code sample for mapping of added field to extract structure.
    There is a BAdI for this purpose : CRM_CSDR_BWA_MFLOW
    I need to insert some ABAP code in this implementation.
    Does anybody can give some code sample for this.
    thanks,
    Yigit

    You can also configure the user status for Opportunity Item also. If you want to enhance the dataSource, here is the sample for BAdI:
    method if_ex_crm_bwa_mflow~enhance_data_source .
      data: it_extract type table of CRMT_BW_OPPT_I,
            wa_extract like line of it_extract.
      case i_datasource.
        when '0CRM_OPPT_I'.
          it_extract = ct_data[].
          refresh ct_data.
          loop at it_extract into wa_extract.
    Implement your logic here*****
    All the statuses stores in CRM_JEST table*****
            modify it_extract from wa_extract.
          endloop.
         ct_data[] = it_extract.
        when others.
      endcase.
    endmethod.

  • Chance user status in sales order VA02

    hi all,
    have any FM or BAPI is available to change (block / release) the user status in sales order change,
    pls note me about this,
    Regards
    Usman

    Hi Aditya,
    thanks,,
    which table and which field need to import in this FM "BAPI_SALESORDER_CHANGE" to change User status (Release / Block) in Sales order.
    Regards
    Usman

  • User status for crm order in bw

    Hello
    There is a customized status profile  in crm for sales orders.
    I'm using extractor 0crm_order_i for loading orders into bw.
    How can I get this user status in the data source through sbiw customization ?
    Thanks,
    Rita Arkin

    If you want to extract additional fields, you need to extend the
    corresponding extract structure and possibly the communication
    structure, fill the field with the user exit EXIT_SAPLRSAP_001,
    etc.
    Also, you will find additional information about such enhancments in:
    http://service.sap.com/bi
    > Documentation
    > Business Content Documentation
    > Extracting Sales and Distribution Transaction Data - vers. 2
    Chapter 7 of this document provides further information about the
    enhancement of extract structures.
    See transaction RSA5
    Colin

  • User status in sales orders

    Hi all!
    Can anyone tell me if there is a way to control the possibility of changing a sales order through the status?
    I wanted that when a sales order reaches a certain user status, for it to be blocked to modifications, as if it was display only...
    Thanks!!!
    Best Regards,
    Carina Maeiro

    Hi Carina,
    Requirement is strange, but still may be possible,.
    Can you give some more info like..
    1. all the users have to be blocked or only particular user?
    2. what wud be the next flow processing of tht order ? like after blocking what you wanna do ? want to raise a message or ?
    Some Work arounds for the above 2 scenarios wud be.....
    1. if a set of users have to be blocked, its very much possible thru customization like, you can define status Authorization keys in Status Management in SPRO where u will be setting the auth key for the user profile
    2. if you want to just block the user not to go ahead i e atleast he shudnt save the order, you can implement CRM_ORDER_STATUS Badi in which you have to raise a error message on the application log saying tht it cannot be saved for so and so reason
    if this solves..coool ....if not tell me the exact scenario ..
    Siva

  • User exits for sales order

    Dear all SAP experts,
    How to find out the user exits for sales document type? Especially the user exits which are called when we save the sales order.
    With best regards,
    Allabaqsh G. Patil

    Hi,
    Also there is user exit to refresh data
    USEREXIT_REFRESH_DOCUMENT
           It is always necessary to refresh user-specific data before   *
          the next document will be processed.                          *
          This can be done in this userexit.                            *
          This userexit can be used to refresh user-specific data       *
          when the processing of a sales document is finished           *
          - after the document is saved                                 *
          - when you leave the document processing with F3 or F15       *
          It may be necessary to refresh user-specific data before      *
          the next document will be processed.                          *

  • Set User-status for PP order

    Hi All,
    How can I set the user-status for a PP order, also let me know which user exit suits this requirement, as I know I have to make use of a FM or a BAPI which sets the user-status in the user-exit somewhere.
    Thanks
    Mark

    Hi,
    Try the following enhancements/exits for setting the status for PP order.
    STATTEXT
    CCOWB001
    COIB0001
    Regards,
    Anji

  • User Exist for Sales Order

    Hi All,
    When the Route changes in the Sales Order, I want to add the Forwarding agent to the Partfner function atutomatically. So I written the code in the User-Exist "userexit_check_vbap" with the following logic.
    IF sales order is creating with VA01, Add an entry
    and Changing the Sales order with VA02, modifiy an exisiting entry as follow.
    But at the time of Creating with VA01, it is sucessfully adding an entry, but
    whenever you the change Route for sales order with va02, Modify statement is working fine and showing the correct Partner function in the Partner Tab.
    If you save the document and open it again then Changed Route is sucessfully saved but not the partner function. It always having the partner function which you given at the time of creation.
    Can we write the modify statement in the "Userexist_check_vbap"
    READ TABLE xvbpa WITH KEY parvw = 'ZR'
                                posnr = xvbap-posnr.
      IF sy-subrc NE 0.
        SELECT SINGLE * FROM lfa1 INTO CORRESPONDING FIELDS OF xvbpa
            WHERE lifnr = tdlnr.
        xvbpa-mandt  = xvbap-mandt.
        xvbpa-vbeln  = xvbap-vbeln.
        xvbpa-posnr  = xvbap-posnr.
        xvbpa-fehgr  = '08'.
        xvbpa-nrart  = 'LI'.
        xvbpa-lifnr  = tdlnr.
        xvbpa-updkz  = 'I'.
        CLEAR: xvbpa-kunnr, xvbpa-stceg.
        xvbpa-parvw  = 'ZR'.
        APPEND xvbpa.
      ELSE.
        xvbpa-lifnr  = tdlnr.
        MODIFY xvbpa TRANSPORTING lifnr WHERE parvw = 'ZR'
                                          AND posnr = xvbap-posnr.
      ENDIF.
    Please suggest me , how can i solve this problem.
    Thanks and Warm Regards,
    Vijay

    I solved the problem by pass the following value
    xvbpa-updkz  = 'U'.
    It solved my problem.

Maybe you are looking for

  • Issue in unit of measure

    Hi, Suppose I have a material whose base UOM is "SHT"  and order UOM"Kg". The system converts the qty of material received in Order UoM as per the conversion factor maintained which may differ from actual qty in Order UoM charged by the supplier in h

  • Secure page unbounded task flow

    i need to secure access to jspx pages in a unbounded task flow. what is the best way to achieve this using jdev 11.1.15 ? as of now any user is able to access any jspx pages by typing a URL after logging in. Edited by: 963798 on Dec 17, 2012 4:06 AM

  • Engineering bom explosion

    Hello team, My client's purpose is he should be able to explode multi level engineering bom with all the details and pull the same to the excel this will be just for his information purpose. I am not sure whether using of CS11 and CS12 is correct for

  • Anonymous user on 7.0 EHP1 SP07

    Dear all, I've started the development of an anonymous accessible Portal using NW 7.0 EHP1 SP03, so the all configurations was been done and it was working well, after update for SP07, the anonymous user can't show the contents, the note 837898 was f

  • How to send 20 mail?

    Hi i got one problem I need to send about 20 mails with attachments in the same time.Has anyone has idea how to do it. Thanks