Extreme is going back, new admin utility is flawed

This is long, but bottom line is my advice is to wait until Apple gets things ironed out unless you have a system without multiple devices.
- Multiple USB drives hooked to a PC running iTunes with a wireless G card
- A macbook
- One Airport Express serving as a router and a USB print server
- 3 other AEs that I stream audio to from the PC or the macbook to 3 different stereos
- A PC laptop I sometimes use with iTunes
- A Palm that I use to control iTunes with a VPN
- A network printer that my PCs talked to via Ethernet and the macbook wirelessly through the express router via the USB port.
Everything shares the internet through the Express router and can stream to the other Expresses.
The macbook is used by my wife and shares the iTunes library hooked to the PC. I wanted the new extreme because I could hook the hard drives to it so she wouldn’t have to go through the hassle of sharing my library and I wouldn’t have to leave the PC running when I travel. She’s not very computer savvy. I thought the wireless N would be good for future updates.
The extreme comes with a new admin utility you have to use. I configured it and it looked to work but couldn’t see any of the expresses. I reset an express and configured it and iTunes could see the express and it would stream music to it but now the admin couldn’t see either the extreme or the express. It could configure another express after I reset it but iTunes couldn’t use it because the admin utility couldn’t see the IP address of the router and assigned a bad address to the express. I could manually assign an IP address and iTunes could see it.
After a few hours on the phone with Apple (they first tried to tell me I didn’t qualify for support because my extreme wasn’t in their system even though I bought it direct, so I had to bully them to help me) it worked, sort of.
Each time I configured an express or changed a setting on the extreme it would screw up the security settings for the extreme so my computers couldn’t see it even though the green light was on. Every time I changed anything and updated I had to delete all keychain settings and reset the passwords. Then
-I kept getting dropouts with iTunes when I never had them with before
-nothing could print,
-the extreme wouldn’t let the Palm join the network
I went back to my original setup using an express as a router, but now it couldn’t see the other expresses and when I tried to reset them even the old admin kept giving them invalid IP addresses. It didn't even work if I assigned the IP address manually. I reloaded the old software that came with the AE and reconfigured and now everything works.
What a disaster. I will be returning the Extreme ASAP.

I bought a new Airport Extreme n and have been unable to set up an Airport Express to extend the network.
Streaming with AirTunes is no problem, but extending the network has been exasperating and impossible.
I exchanged the Airport Extreme n for a new one, factory re-set everything countless times and no luck.
I think that some of the advice for this problem in these forums is coming from people who have not got the hardware concerned and so they are making assumptions based on Apple's reputation.
For example, some are referring to Apple documents which relate to legacy Extreme products and not the n.
I have trawled through every post and Apple document and manual without success.
My own conclusion is that the new AirPort Utility programme does not work properly and/or there is a generic fault in Extreme n's.
A clue here is that Apple's latest documentation says to set up the extended network manually, so that says a lot for their auto set up wizard!
If anyone out there has successfully got an Express to extend their Extreme n network then please tell me how you did it.
Meanwhile I think Apple should suspend their series of Microsoft batering advertisements until their hard/software works.
I stand ready to be corrected and will be delighted to hear if anyone has been luckier than me.
I hope this thread is not marked closed before it finds an answer.
iMac 24" 2.33 GHz Intel Core 2 Duo, 3 GB 667 MHz DDR2 SDRAM   Mac OS X (10.4.8)   Apple Wireless Keyboard and wireless Mighty Mouse

Similar Messages

  • My homepage brings up an unwanted tab.Don't want the tab.I, going back to IP utill it is fixed.

    my home page is ixquick.com and don't want nor use add ons .Only within the last month has this annoying tab been appearing requiring an additional keystrock every time I enter foxfire.

    This issue can be caused by the MySearchDial extension.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can check if you have a user.js file in the profile folder to initialize prefs each time Firefox starts.
    The user.js file is only present if you or other software has created this file and normally it wouldn't be there.
    You can check its content with a plain text editor (right-click: Open with) if you didn't create this file yourself.
    The user.js file is read each time Firefox is started and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
    *http://kb.mozillazine.org/Preferences_not_saved
    You can use this button to go to the currently used Firefox profile folder:
    *Help > Troubleshooting Information > Profile Director: Show Folder (Linux: Open Director; Mac: Show in Finder)

  • Airport Admin Utility can't read config

    I replaced my broken Express with a new one. It came with newer Admin Utility software that requires 10.3.3 or higher (even though the box says 10.2.7 is required). The new software won't install on my iBook, which runs 10.2.9. So, I installed the Express with my existing software- 3.1.1. It installed fine and it works but I can't access it with my Admin Utility to change the config or view the key. I can see the device in the Utility window, but it can't read the configuration. The old Express was v5.4 and this one is v5.6.

    You don't have an Express - you must have an Extreme Base Station if it is running firmware version 5.6.
    You could revert the firmware on your Base Station back to version 5.4 using:
    http://www.apple.com/support/downloads/airportextremefwupdate.html
    If you cannot get this to work from your own Mac, you will need to bring the Base Station in to someone with a Mac running at least MacOS 10.3 to do the firmware downgrade process for you.
    You should then be able to use the old Airport configuration software version 3.1.1 on your Mac.

  • Can't see my two Airport Express in the Admin Utility

    I have a 12" PB and two Airport Extreme.
    I am unable to see the two Airport Extreme stations through the Airport Admin Utility - but (here comes the strange part) - I see them both in my router's DHCP Active IP Table (freshly updated too).
    Both base stations show a green light.
    iTunes does not see any of them either...
    Any idea what could be the problem? Do I have to 'free' some ports in the router for them to work?
    Any hints appreciated!
    Mario

    I just tried something - in the Airport Admin Utility, instead of waiting for the base stations to show up, I clicked on 'Other' and entered the IP address. Well, I can edit/modify/reset both of them! This is driving me nuts. They seem to identify themselves fine on the network, but none seems to do the right thing! (I use one as my AirTunes, the other as my wireless printer connector).

  • Airport not listed in Airport Admin Utility

    My Airport Extreme not listed in Airport Admin Utility, but sometime it re-appear after reboot. I have no problem connecting to the Internet both wired and wireless even through Airport Admin Utility does not show a Airport Extreme. I can also access the Airport Extreme if I type in the IP address and the password. The problem is that when it does not show up, I cannot print via Bonjour. Did anybody have similar problem and way to resolve it? I have a iMac (wired) and a Powerbook (wireless) connect to the Airport Extreme. Thanks

    My Airport Extreme not listed in Airport Admin Utility, but sometime it re-appear after reboot. I have no problem connecting to the Internet both wired and wireless even through Airport Admin Utility does not show a Airport Extreme. I can also access the Airport Extreme if I type in the IP address and the password. The problem is that when it does not show up, I cannot print via Bonjour. Did anybody have similar problem and way to resolve it? I have a iMac (wired) and a Powerbook (wireless) connect to the Airport Extreme. Thanks

  • Airport Admin Utility cannot read configuration

    10.5.2 software German. airport extreme airport express 802.11n
    Admin Utility sees the AE Base, but fails to read its config, so I cannot change any settings.
    Reset to factory setting would be very ugly as a solution.
    It happens since I tried to add a second configuration by duplicating the existing one. Now I use the old configutation, but after I manged to restart the AE base with this old config, I cannot access te AE base for configuration any more

    wrong forum

  • Airport Admin Utility/Snow ABS

    Hi Folks,
    I've read about others having similar problems, but no resolution for me as yet.
    I purchased what I think is a "Snow" model ABS at a garage sale for $5. It's now connected to my DSL modem and Powermac at home, and everything works fine... the Powermac and my Powerbook both see the network just fine.
    The trouble is, the network has been password protected. So, the only way I can access the internet is during the 5 minute period after I perform a hard reset on the base station.
    I know I need to reconfigure the base station, which should be no problem. Trouble is, the base station is not recognized by the Airport Admin Utility. No base station is recognized, even when I re-scan.
    This occurs both when I have the ABS connected via ethernet to either my Power Mac or Powerbook.
    Any ideas?
    -EE
    G5 1.8dp   Mac OS X (10.4.3)  

    Somtimes the Base Stations can be "undiscoverable" meaning then they have a setting in them making them only accessable by typing in their IP address, or name.
    Try going into airport admin utility hit "other" (next to rescan) and in the box that comes up type in 10.0.1.1 for the IP address Now see if it finds it. Note also if it was protected by a password you will need to enter the Base Station password.

  • Airport Admin Utility can no longer access Airport Extreme, what now?

    I have an Airport Extreme that worked fine for a long time with a specific IP. They sold out and the new company came in and installed new equipment. The settings had to change on the Airport. After that, I lost my ability to print through the Airport USB port.
    I tried to resolve the problem the other day. My Airport Admin Utility saw the Airport, but I couldn't access it. When I clicked configure, a window came up saying "Reading configuration from base station", then a Password login window came up. I enter my password, it says "Reading configuration from base station", then it says "An error occurred while trying to access the base station. Make sure your network connection is valid and try again.". It does the same thing whether I enter the right or wrong password.
    It started working unexpectedly for a little while. I experimented with some settings. Now I can't access it again. The Airport Admin Utility sees the Airport as 10.0.0.0, my laptop's IP says 169.xx.whatever. I thought the Airport was supposed to distribute IP addressed. It did for awhile after I set it that way, but then it went back to 169.xx.whatever.
    I'm lost. I don't know how I will ever access the Airport again. Or get my printing capability back.
    Help!!!

    Ok. I'm going to try a reset on a day where I have some time to mess with it. There are some things I need clarified for me about settings. Please correct me as needed.
    In the internet tab:
    -Connect using Ethernet is selected.
    -Configure Manually was selected before as it is now.
    -IP address: do I use their IP or 10.0.0.0 or 10.0.1.1 or what?
    -Subnet mask: It used to be 255.255.255.0 now it's 255.255.0.0.
    -Router address: What do I put here, use their IP or 10.0.0.0 or 10.0.1.1 or what?
    -DNS servers: I will enter their DNS servers.
    -Domain name: blank
    -WAN Ethernet Port is selected Automatic.
    Under Network Tab:
    -Distribute IP adresses is checked.
    -Share a single IP address (using DHCP & NAT)used to be checked, now Share a rnage of IP addresses (using only DHCP) is checked.
    -DHCP Lease: 4 hours. What is best here?
    Do I really need to worry about anything else? If the password is reset how to I access from default settings?
    Thanks, after this I should have a better understanding of network settings and the AEBS.
    J-

  • AirPort Extreme Admin Utility

    I have just purchased a AirPort Extreme base station for my Dell Inspiron 4150 - Dell TrueMovile 1300 MiniPCI Card, PowerBook G4 12" (1GHz) - AirPort Extreme Wireless Card, and a custom built desktop - Belkin Desktop Wireless Card network. I am using a D-Link DI-604 router to handle DHCP and issue addresses and is connected to the cable modem, all the base station does is serve a hidden network, with with 40-bit encryption, MAC address filtering. When I open AirPort Extreme Admin Utility on either my wired desktop (connected to the D-Link router), the wireless destkop, and my dell laptop, the admin utility scans for base stations and comes up with the base station name and an IP address of 254.128.0.0, that is not the right address, it was assigned a 192.168.x.x by the router. When I just click configure I get a communication error and I get put back to the main screen. I can however administer it by clicking other and typing the address and password in. However it should show up as the correct address right? The base station has been acting weird by not allowing me to add a Linksys Wireless network card as well, but that is a different issue. I previously had a Graphite base station that died (the left most red light stayed on) and this set-up worked fine. Any sugestions? Thanks

    All of the software and/or firmware updates are available online. I don't know what AEBS model you have but firmware updates as well as Airport software updaters are all available online for their most current versions.
    If you have just purchased the newest AEBS then you won't find any software updates for it because it's all new and all the newest software is included on the Installer Disc that came with it.
    If you have an older AEBS then you will need to download any firmware and software updates required. The old AEBS models are themselves more than four years old but firmware and software updates are available that were released in 2005.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • HT1338 How do I update osx 10.4.8 if the network admin utility is not compatible with my apple airport extreme and I an't connect to the internet?

    I was given an iMac desktop computer, operating system OSX 10.4.8 (2011). The network admin utility is not compatiable with my airport extreme router, and I am unable to connect to the internet to update the software.   Can someone please tell me how to update the software or download a newer version on the network admin, or how to connect this computer to the internet?
    Thanks,

    I assume you have a PPC.  There is another update for the Intel.
    PPC:
    http://support.apple.com/kb/dl177
    Download. Do not expand.  Copy to your mac.  double click on dmg icon.
    Have you tried an ethernet cable? 
    Ethernet Bridge
    Ethernet Bridge  "The versatile Wireless-G Ethernet Bridge can make any wired Ethernet-equipped device a part of your wireless network."  from linksys example: http://www.amazon.com/Linksys-RE1000-Wireless-N-Range-Extender/dp/B005FDXMJS/ref =sr_1_1?ie=UTF8&qid=1314563758&sr=8-1
    This linksys bridge is the safest solution since it doesn't require any Mac OS drivers.
    Airport ExpressAirport Express is an external unit and you can configure it as a bridge.  802.11n ( I bevieve you will need a more modern version of Mac OS X to configure.  Sadly, Apple uses a configuration program to configure, not a web browser. ) 
    USB dongle
    Newer Technology MAXPower 802.11g/b Wireless USB 2.0 Stick Adapter $15.99 http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2/ 
    Newer Technology MAXPower 802.11n/g/b USB Adapter. The easiest way to add Wireless Connectivity to ANY computer! 'n' speed is the newest and fastest. $29.99 http://eshop.macsales.com/item/Newer%20Technology/MXP802NU2C/

  • How can I get Airport Admin Utility to Locate My Extreme Base Station?

    In an effort to repair some network connection problems I was having with my ISP (or so I thought), I reset my Airport Extreme Base station today. I have been unable to get it back to normal since. I'm currently connected to my ISP through an Ethernet connection directly from my modum to my iBookG4. Now, when I try to re-established the old network connections with my Airport Extreme, I cannt get the system to recognize a base station. When I use the Airport Admin Utility, the window pops up and *** me to select a base station, but there are none in the window. When I rescan, nothing comes up. The airport setuup utility has been no help either. Any ideas how to get my base station back? Thanks!

    Hi, Tesserax:
    Thanks so much for your reply. I tried the direct connection, as suggested in a previous message I saw on this board. Didn't work for some reason. Lucky for me, one of my neighbors works in the tech department of a nearby Apple Store. Last night he was able to get the base station working again. I wish I could share how he did it on this message board, but it was beyond my modest understanding. Again, thanks for taking the time to reply!
    Best, Kevin

  • Configuration Error with Airport Admin Utility. Where is the newer version?

    I am trying to make a change in Airport Admin . I am getting a pop-up saying
    "Configuration Error" This version of Airport Admin Utility does not support this base station. You can't update the software for this base station, but you may be able to make configuration changes to it". ...
    It says go to apple.com/support to locate a newer version - but I can't find one.
    Does anyone know where it is?

    Your first post indicated that you were using "AirPort Admin Utility".
    If you have the new square 802.11b/g/n AirPort Extreme base station (AEBS) ou don't want to use that.
    Instead you want to use "AirPort Utility".

  • Airport Extreme working but not visible in Airport Admin Utility

    Recently my Airport Extreme (spaceship version) stopped showing up in the Airport Admin Utility v4.2.
    The internet works fine computers can connect wirelessly or wired to the Airport Extreme and use the internet. AppleTV isn't visible in iTunes anymore either so it can't sync but can connect to the internet to see previews, YouTube, etc.
    I have tried removing Airport Admin Utility and reinstalling, checked permissions, all okay.
    Any ideas?

    Ah - more clues always help!
    In that case, I tend to agree with your assessment. For some reason, the Bonjour automatic network device discovery process seems not to be working properly on this Mac. I'm not going to be of much help in troubleshooting that problem.
    The only other issue I have encountered is with the installation of excessively robust firewall software on the Mac blocking Bonjour's ability to discover network devices. VPN client software is sometimes also a culprit, for the same reasons. You have already indicated this could not possibly be the cause of your problems.

  • Airport Admin Utility can't find Airport Extreme

    I have an older Airport Extreme, about 4 years old. It's been giving me trouble lately, where basically I check my computer and it's not online. I have to click the tiny reset button on the back of the airport and that usually works fine (although annoying).
    Today the problem seems a bit worse. I tried the reset thing, but that didn't work. So I tried to do a reset through the airport admin utility. Unfortunately the utility can't seem to detect the airport, although it does detect the airport express we have downstairs (which is essentially used to extend our network a little further).
    Currently, of the three tiny lights at the front of the airport, only the middle one is lit, and it is not flashing. Earlier, just after doing a restart, the middle light was blinking slowly and the third light (the one on the far right) was blinking more rapidly. I have not seen the first light lit up today.
    If anyone has a suggestion on how I might get this working I would very much appreciate it. Thanks.

    Are you getting internet access through the airport? I have the same problem - airport admin utility can't see the airport, but the airport extreme has created a generic network that i can't manipulate without airport admin utility. I have internet...

  • "Configuration Error... download a new AirPort Admin Utility" Ok where?

    I just purchased a new airpot extreme. So far, no problems until now. I wanted to reconfigure it to add a password etc, but when I select "configure" in my current Airport Admin Utility (located: Applications - Utilities - Airport Admin Utility) I get the following message;
    Configuration Error
    This version of AirPort Admin Utility does not support this base station. You can't update the software for this base station, but you may be able to make configuration changes to it. Please go to www.apple.com/support to locate a newer version of the AirPort Admin Utility.
    It won't let me pass this warning. I've searched the support pages for the AirPort Extreme but havn't been able to find any new Admin Utilities. Only updates for the one I guess I don't have. Which is weird because my MacBook is not that old. It's Intel based.
    Someone, please help.

    Me again,
    Ok, say I threw that away, where can I go to download
    it?
    I had a feeling that what I needed was on the CD.
    Dang it. I'm so used to Apple being on top of
    updates and the like, that I've fallen into the
    routine of tossing out the CD's that come with what
    I buy. Otherwise I have a small libarary full of
    CD's and what nots to manage.
    There is the place to go:
    http://www.apple.com/support/airport/
    See "Update Your Software" in the lower right.

Maybe you are looking for