F.13 does not clear all documents

Hi
F.13 does clearing of some documents. There are many which balance to zero. I have set following for customer
ZUONR, VBUND, WRBTR
Thanks
kamala

Dear,
ZUONR, VBUND, WRBTR........
I think you should remove WRBTR and then try because there will be many invoices where multiple payment been made for one invoice. So ZUONR will be the same but not the amount....
Regards,
Chintan Joshi

Similar Messages

TREX does not index all documents fro document class SOLARGNSRC

Hi all,
I've setup a connection between a TREX server (which is also used by a portal system) and Solution Manager. I've gone through the settings in SAP Note 750623 and I was able to create a index, the queue and even bypass the basic authentication in the preprocessing for document class SOLARGNSRC
According to everything I've read, this should be enough to be able to index all documents in Solution Manager and find them with Full Tex Search. But this doesn't work. From the 50.000 documents in de class (35.000 English and 15.000 German) only 6300 documents are passed to TREX. Most of them are German HTML links to help.sap.com. I can see in the trace files that the URL's to some documents in the content server are passed to TREX. I can open dthe document using the links but I cannot find the documents using the full text search which I think means that nothing was really indexed.
Questions:
1. Has anyone been able to succesfully index Solution Manager documents for full text search purposes?
2. Why are only 10% of the documents passed to TREX? Is there a specific setting for this?
3. Why does TREX use the Content Server HTTP links to index the documents and not the RFC connection?
Cheers
Marcel Rabe

Yep, all lights green
SSR maintained. DRFUZZY as Search Engine (I have not tried Verity)
Return Code? Interesting, I don't get an return code when I trigger the Index/Deindex. I just see the hourglass for about 5 minutes (when I run it in the foreground) and after that its back to the way it was. No messages. Nothing appears in the application logs as far as I can see.
The program RSTIRIDX is scheduled in the background and runs every hour minutes for about 10 seconds without an error.
TREX Version 7.00.39.00
Five languages actived, including German and English. In SKPR07 under Indexed documents I can see that 300 German and 6000 English documents have status indexed.
No proxy server. Systems sit within the same network segment
Thnx for your help. I posted a message with SAP as well as this seems strange to me.
Marcel

PDF does not contain all document elements

I've created a new brochure using InDesign CS5 and everything looks OK in the InDesign format, but when I export the file into pdf-format, not all elements are included.
The pdf does not display the top banner on one page and a transparent figure is missing from the background of all odd pages. I have used two masters and the master pages look OK in the InDesign format.
I've tried exporting the file into several different pdf formats (print quality, high quality etc...), but the problem remains.
Do you know where the problem is? I really hope you can help me.
BR,
Suvi

Ok, thank you for the answer. I need to install the 7.0.3. update.
However, the issue got solved when I used the print to pdf function instead of export and thicked the "Print non-printing objects" box. :-)

"Find" button does not clear all the fields properly.

Hi,
A JSF jsp Query page is created and a set of components are dragged from the Data Control Palette. They include three inputTexts, two buttons (find, submit). Both of the buttons are dragged from the relationship from the Data Control Palette as well.
At the first time the "Find" button is clicked, it clears all three inputTexts. The user can enter query and press submit button and go to the result page. Example:
Zip: 85007
First Name: Tom
Last Name: Smith
But when the user click the "Go back to query page" button on the result page to return to the query page, the "Find" button needs to be clicked 3 times in order to clear all the inputTexts.
Anybody knows how to fix it? Thank you.
Annie

I just tried it with DEPT & EMP from HR. The problem is still there.
I dragged a master-detail relationship from the data control palette where DEPT is the master and EMP is the detail. "Find" & "Execute" buttons are also dragged from the DepartmentView1 Operations. When I click "Find" button the very first time, it clears all the fields in DEPT (master) and I can put my query there. For example, I put 50 for DepartmentID then hit "Execute". It gives me 45 details. Then I click "Find" again to do another query. Here comes the problem. "50" is still in the DepartmentID field. If I click "Find" again, DepartmentName Shipping, ManagerId 121 and LocationId 1500 will all appear in the master. If I click "Find" button the 3rd time, it clears all the fields in DEPT for me to enter another query.
I do not think this is the right way for the "find" button to work. Did I do anything wrong? What could be the problem? Please help. Thank you very much.
Annie

Clear cache does not clear all the cache

Hi,
After clearing the cache, the browser assumes some of the files are still cached so it won't try to get the file from the server. This causes the website to hang as it does not timeout.
It does not always happen, for example in my machine is OK, but a colleague's machine has it consistently and other people too.
The only way that they could make it work is going to about:support and doing a reset.
The Troubleshooting Information I've added is from the problematic machine.
regards,
Daniel.

They use the built-in means to clear the cache.
Tried deleting the cache folder but it did not help.
Tried also deleting the profile folder contents and it did work. I guess that is similar to reset functionality.
Still, if clearing the cache folder worked would be a a workaround for us, as developers but not something we could ask from our customers.
You can try it with this URL:
https://hornbill.socialworkforce.com/socialworkforce/user/lib/hux/server/comboloader/comboloader.php?ver=1.1.0&../../ext/yui3/../../../esp_hux/components/Xmlmc/Xmlmc-min.js
Again, they are able to load it for the first time, but if they clear the cache, they cannot get the response from that url, in fact there is not even a request from the browser.

After hiighlighting a word and pasting it into another document, the clipboard does not clear ;when I hit enter it pastes again and again. How do I fix it?

When I highlight a word or phrase and copy to the clipboard, then paste it in another area the clipboard does not clear the phrase. Therefore, every time as I type and hit the enter key it continues to paste the phrase all over my document. I do have the latest download of Firefox installed (16.0, win 7 and that is when this started. How do I stop this obnoxious behavior so I can type a sentence with normalcy?
Louise

Thank you, Iusually do that first thing with any computer problems. Old school computer fix. Hard Boot regardless! lol Thanks again.

Window pops up stating"browser error" when trying to access documents using google doc's. Holding shift key and refresh does not clear window. What's next?

Shut down and restarted computer, "browser error" still pops up when trying to access documents using Google doc's.
Holding shift key and clicking refresh does not clear window.
What else can be done to clear the window and gain access to my documents?

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

FINSTA Bankstatement does not clear Open Items

Dear SAP guru,
I am experiencing an issue where FINSTA bankstatement generated in IHC module does not clear Open items in reciving company code. I would like to get the system to search for the document based on the original FI document number and clear it. The situation is
The bank statement successfully processed has an original document number and processed.
In IMG for EBS, I configure as algorism used is 20 - Document number search and Bank Posting type 4: Clear Debit GL account
Clearing account - and have the posting with relevant document number matched with the bankstatement.
It seems that the system does not find the matching at all.
Could any of you shed some light on what I am missing???
Kind regards
Taro

Creating or even using something like a data migration account is the best way.
Are you saying that you have a GL account with say 100 line items and you want them all cleared. If that is the case you wont need a LSMW, make sure you know the amount, and then create a journal posting to your new GL account, and select all items in the GL account you want to clear.
If there are various GL accounts, again no real problem, in F-03 which is what you would be using, you can enter more than GL account so that should not be an issue.

Defered COGS does not clear

Hi Gurus,
I am seeing sporadically DCOGS account does not clear causing balance in GL . I am looking to see problamatic transactions from GL.
I have done sanity check from Cost Management with COGS Process , Revenue Recognition and Generate COGS Events. All looks good
Here is the case - I have the DCOGS GL account having the balance. I can drill down but how to identify which are the transactions thats causing this balance?
Drill down shows all the transactions but doesnt have capability to show stuck transactions. Are there any tables that helps in seeing this details?
Any one who has more inputs on this issue , I appreciate the help.
Thanks
Raghavendra

Hi Raghavendra,
You may benefit from the following oracle support document:
Identify the Sales Order Issue Transactions that have been finally accounted but have no Revenue Recognition Transactions i.e. COGS or DCOGS (Doc ID 1616456.1)
However, functionally, I usually like to track deferred COGS through "COGS Revenue Matching Report" as it gives me direct information on what orders have been earned (revenue recognition) and still have DCOGS
"This report in Cost Management responsibility"
Hope this helps you
Regards

FDM export to HFM - 2nd export did not clear all data from 1st export?

Has anyone experienced exporting a replacement FDM file to HFM where the 2nd file did not contain an account that was present in the original file and that account/value in the 1st file then remained in the HFM trial balance and caused it to be out of balance? Does the replace export option not clear all the prior file data? The only unusual part of it might be that the problem account was derived using logic group script? Thanks.

Thanks Hensen - Sure, it was easy enough to fix once I deduced what the problem was - although my solution was just to use the data clear function and reload. The real question is how to prevent it from happening again and it sounds like I can't do much about it - other than trying to train the users to watch out for do-over files that have fewer accounts than the original load?? Am I wrong to think that HFM should try to fully clear all previous data from a load file if there is a replacement or at least try to validate whether or not all prior accounts have been repopulated?? There's plenty of good validation in the validation step of FDM. Why not during the export step? If this makes sense, I'll put in another "enhancement request" to support.

Workbook does not exist in document store

Hi All,
I have transported a workbook by selecting Role with "only necessry objects" then selected only my workbook, that transport was successful.
My Role has different folders, this workbook is part of one of the folder.when this transport went through it messed up other workbooks in that folder. when i try to run other workbooks in that folder it says " workbook does not exist in document store"
Can anybody explain me why is it sayin so, do i need to select all workbooks in that folder when i transport??
Thanks in advance.
Robyn.

Hi Robyn.
Sounds VERY like the issue we have to manage carefully, where an old transport has gone through, and undone the impact of a later transport - could that be the problem? If so, I will explain how we have set up a process to enable us to manage it, cos there are times when we have had up to 6 different workbooks going through in parallel, each with a role transport, and ensuring that the older ones dont undo the effect of the newer ones was nearly impossible!
Patrick

MQ Adapter does not clear the rejected message from the queue

Hi All,
I'm using a MQ Adapter to fetch the message from the queue without any Backout queue configured. However, whenever there is any bad structured message found in the queue, MQ adapter rejects the message and moves the message to the rejmsg folder but does not clear it off the queue, as a result of which it keeps retrying the same hence, filling the logs and the physical memory. Somehow we do not have any backout queue configured so I can move the message to blackout queue. I have tried configuring the jca retry properties and global jca retry as well but to no avail.
- Is it not the default behaviour of MQ Adapter to remove the rejected message from the queue irrespective of Backout queue is configured or not? The same behaviour working well with the JMS and File Adapter though.
- Is there any way I can make MQ Adapter delete the message from that queue once it is rejected?
Regards,
Neeraj Sehgal

Hi Jayson,
Check this URL which answers a problem with com.sap.engine.boot.loader.ResourceMultiParentClassLoader problem:
http://209.85.175.132/search?q=cache:RnFZ9viwuKkJ:https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.sdn.folder.sdn!2fcom.sap.sdn.folder.application!2fcom.sap.sdn.folder.roles!2fcom.sap.sdn.folder.navigationroles!2fcom.sap.sdn.role.anonymous!2fcom.sap.sdn.tln.workset.forums!2fforumtest!2fcom.sap.sdn.app.iview.forumthread%3FQuickLink%3Dthread%26tstart%3D45%26threadID%3D1020700+com.sap.engine.boot.loader.ResourceMultiParentClassLoader&hl=en&ct=clnk&cd=3&gl=in&client=firefox-a
Please check that the JDK compliance level is at 5.0
Window->Preferences->Java->Compiler->Compiler compliance level set this to 5.0
Set the installed JRE to the one you have mentioned JDK 5.0 update 16
Window->Preferences->Java->Installed JRE's->
Click on the add button to select the path of your JDK.
once completed click on the check box next to it.
regards,
AKD

EMC Does Not Show All Databases Copies Information on DAG - Exchange 2010 SP2

Hi guys,
Really need your help here, suddenly my customer complain that they cant see any information on database copies on their Active Copy DAG Exchange server, for another DAG members, the database copies information is visible. After do some readings, I found
this related to Exchange 2010 SP1 known issue.
http://workinghardinit.wordpress.com/2010/09/13/emc-does-not-show-all-database-copies-after-upgrade-to-exchange-2010-sp1-still-investigating/
But, for my environment, there is Exchange 2010 SP2. I have no idea on this issue since there is no error log thrown out from the event viewer. I already try to restart the server itself and the Microsoft Information services but no luck.

Hi,
Based on the description, your customers could see passive database copy information, but they couldn’t view the detail information such as state: Healthy in EMC.
When did this issue begin?
Please restart the AD topology service to check result.
Since we have the information correctly on Exchange shell, please try to clear EMC cache and then open console to check if you can see database copy in EMC.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

Edge 2013 does not discover all Exchange servers in the org

We have the following co-existence setup:
Edge 2013 sitting on the DMZ.
1 CAS 2013
1 MBX 2013
1 CAS/HUB 2010
1 MBX 2010
After creating a new edge subscription on the edge server and successfully completing it on the 2013 mbx server, when I run get-exchangeserver on the edgeserver I get only the 2010 CAS and the 2013 MBX. 2010 MBX and 2013 CAS are missing.
All mailflow is working fine, yet if I shutdown the 2010 CAS, incoming mail flow stops, because for the edge server the 2010 CAS is the nexthopdomain, it doesn't find it and gives a 4.4.1 error in the SMTP receive protocol logs.
I have tried re-creating the subscription several times, I tried forcefullsync, it syncs fine yet it does not discover all the servers.
The firewall on the edge is disabled and in the internal servers as well, just to be sure that there is no communication error.
When the edge server receives an email from the internet it sends it to the 2010 CAS/HUB server and then to the 2013 MBX server.
Also the documentation from technet states the following for Edge and messages arriving from external senders.
Mailbox server and Client Access server installed on different computers In this configuration, the Client Access server is bypassed for inbound mail flow.
Mail flows from the Transport service on the Edge Transport server to the Transport service on the Mailbox server.
So in my config, the CAS should be bypassed, but yet that's not happening. The "proxy to a CAS server" option on the connectors is not enabled.
I believe all the above would be resolved, If I could make the Edge server discover all of the servers in the org.
Ideas?

Hi Dimitris,
Base on my knowledge, I think this is a normal behavior on Edge server. Since the computer that has the Edge Transport server role installed doesn't have access to Active Directory.
We will create an Edge Subscription from mailbox server(Exchange 2013) or hub server(Exchange 2010). So the Edge server will only connect to these servers with transport role.
According to the Edge Subscriptions document, it said:
“The Edge Subscription process provisions the credentials used to establish a secure LDAP connection between Exchange 2013 Mailbox servers and a subscribed
Edge Transport server.”
Edge Subscriptions
https://technet.microsoft.com/en-us/library/aa997438(v=exchg.150).aspx
Best regards,
Niko Cheng
TechNet Community Support

Using term set as refiner in content search web part does not show all used terms

When you create a terms set (12 terms with +/- 10-20 child terms) , attach it to a site column and allow multiple values to be selected the search service does not find all used values in the REFINERS tab of the content search web part.
Example:
Field ‘Tags’ is the term set which can be refined. We want to do this in the REFINERS tab of the content search web part.
Tags is containing following fields:
•Course document
•Poster
•ALS
•Before
•During
•CPR/AED I
In all libraries we used +/- 15 different tags already.
Example of a tag field in the library: "Poster;ALS;Belgium"
The problem is we can’t see all of the used tags in the refiners tab when you open it for the first time. (You can see Belgium or Cyprus is not in the list of tags.)
When you select one tag and add it as a refiner, the others eventually do show up. But never all of them together. It’s like he is only showing the most used (and maybe first selected?) tags first. I also think he might be having some trouble
with multi value selections in the tag field.
Does anyone else have the same issue as we do? And is there a solution already?

Hi Sasha,
According to your description, my understanding is that all the used terms cannot display in the Refiners in Content Search web part.
If the results display in the Search Result Preview, then the terms used in these results can be displayed in the Refiners tab.
I tested the same scenario per your post, and when I first opened it I can view all the terms which were used in the search results listed under owsmetadatafacetinfo.
I recommend to do a full crawl and then you can view all the terms used in the search results are displayed under owsmetadatafacetinfo.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

F.13 does not clear all documents

Similar Messages

Maybe you are looking for