F-32 new button "Cash Disc Due" in ECC6

Hello all,
Does anyone know what is the new button in F-32 "Cash Disc Due" in ECC6?
any documentation will be helpful.
thanks,
Michal

Hi
The cash discount which is taken into account during clearing providing the cash discount has not been set to inactive. The cash discount displayed there can be changed within the framework of the tolerance limits for users and customers/vendors.
Regards
Tanmoy

Similar Messages

DVDSP3 Won't Make New Buttons, Won't Open Project Files

HELP!!!!
The button editor in my DVDSP 3.02 stopped working after it opens a new project file. I mean, when you go to a menu and then hold down the mouse button and drag, nothing happens. It will not create any new buttons. Even if you drag a button template over and use the pop-up submenu. It will not create any buttons.
Worse is what happens when I open an existing project file. Then it stalls forever at the "Loading Menus" point in the "Loading Project" dialog. It doesn't crash, it just stalls there forever. However, if I click "cancel" - THEN the app crashes.
But it won't make buttons in the new project files it can open, and it won't open any existing project files. Very confusing.
Here's what I know and have done to this point...
If I watch this whole process in the Activity Monitor, here's what I see. I find that two apps named "DSPX_AEncoderServer" and "DSPX_EncoderServer" get hung (and turn red) when the "Loading menus" point is reached in the document load. Sometimes DVDSP will say it's hung, too, but not always.
However, I found that my DVDSP app still runs flawlessly if I boot from my "clone" backup drive, which is how I'm still able to get work done currently.
Back on my normal boot drive, all of the other Apple Pro apps still run perfectly - FCP, Compressor, A-Pack, etc. But not DVDSP.
OK, here's a clue, but I don't know what it means. Two months ago, I had the logic board replaced on my G4. All the pro apps made me re-register. Then this DVDSP problem appeared out of the blue. Nothing fixed it that I could find. What made it finally go away was the timely arrival of a new Security Update to the OS via "Software Update." Installing that made the problem with DVDSP go away, for good.
Not doing hard drive maintenance, repairing privleges, fully optimizing OS, Disk Warrrior, Norton DiskDoctor - none of them worked. But that Security Update showing up, installing, and then doing the post-install optimize fixed the problem. That time. Or maybe it didn't? Because...
Two weeks ago the FW ports on the "new" logic board blew, just like the original, so AppleCare gave me a third logic board.
Same deal as before with all the pro apps wanting to re-register because they are seeing a different serial number in firmware.
Also, just like before, I have this trouble with DVDSP. But I can't fix it this time.
In the past three days (two of which were really one "large" day with no sleep period in between) here's what I have done in an attempt to fix this, without success.
I dumped the receipts for the DVDSP v3 installs and upgrades, then I reinstalled the DVDSP components from my original disc, and then reinstalled the online 3.02 upgrade. No go.
I did all of the above, except this time I found an Apple TechNote on deinstalling DVDSP v2. So using that as a guide I did my best to delete the app and all its supporting files, as well as the install receipts, before doing a fresh install of the app and the v3.02 upgrade. No go.
I did a plethora of hard drive and system maintenance thinking that perhaps some files had been misplaced, a hard drive directory corrupted, a bundle bit here or there un-set, a few system libraries de-optimized, various font and system caches corrupted, as well as numerous log files too filled up with "essential" data to run correctly therefore in need of deletion.
Along with anything else I could think of based on my 20+ years of supporting Macs in a production environment. Again, no go.
So I deleted all the DVDSP files and receipts from my boot drive again. Then I dumped all the install receipts for OS 10.3.9 and ran the "combo" version installer for that OS upgrade. Next I dumped the receipts for the Security Updates and reinstalled those. Then I did drive maintenance, OS permission fixing and optimizing. Then reinstalled DVDSP and friends. Still no go.
But my version of the app that is on my backup hard drive that I cloned right before taking the Mac to the shop for the 3rd logic board still runs just fine. I boot off that drive (connected via Firewire) and DVDSP will run fine.
I'm confused.
Now I'm not inclined to spend a lot more time on this since my DVDSP 4 upgrade is due for delivery any day now, and I'm sure that will work OK. Especially since I'm planning on moving to Tiger at that point, too.
But in the meantime, it sure would be nice to know what happened to my "regular" copy of DVDSP.
Can anyone figure this out, or at least give me some new ideas on now to troubleshoot this?
Apple Support refuses to help me because I'm still using an "unsupported" version of DVDSP. Even though I'm still using it because my purchased upgrade is being delivered via "media mail" - the US Postal Service's version of the proverbial "Slow Boat."
That was a difficult and frustrating conversation withthe Apple Support rep, too, let me tell you. I've been a fan, user, customer, supporter, and evangelist for Apple hardware and software since 1984. But when that voice on the other end of the phone essentially told me that...
a) if I was not using the latest and greatest version of the software, AND...
b) if I was not willing to spend several hundred dollars each year on support fees...
...then I was basically on my own and they would not help me. Worse, they didn't care that I was an old and loyal customer, or that I was even a stockholder in the company. The support system essentially told me to get stuffed. Yee-e-e-ow!!!!
I was especially mad about this because I have this nagging suspicion that this whole problem I'm having with DVDSP is somehow related to some kind of copy protection scheme that Apple has going on but doesn't talk about.
I mean why did I need to re-enter the serial numbers for all my pro apps when I changed logic boards? Is my problem being caused by some Pro App component that knows enough to stop working when it thinks it's been bootlegged, but doesn't know enough to trigger a re-registration of itself.
At this point, that idea is beginning to sound more and more plausible as the cause of my trouble.
Anyway, this problem is seriously hurting my workflow. I'm out of ideas and I need some guidance from the collected wisdom of the forum to solve this problem.
Thanks in advance.

I didn't see anywhere that you had downloaded and
installed the latest proApplication Support file. If
you haven't, you should do this next:
http://www.apple.com/support/downloads/proapplications
upport31macosx1039.html
Hal:
I had reinstalled that ProApps Support version, but I hadn't done it since I deleted all the app files and such, then done a complete reinstall from the DVD.
So I just downloaded it afresh, and then installed it. Then I restarted, and then repaired permissions with Disk Utility.
Still no go.
I'm bamboozled. I thought I knew something about this stuff, but I guess it's good to stay humble.
However, my 5.1 studio upgrade just arrived in today's mail. I think I'm going to take a chance. I'm between projects right now. So I'm going to upgrade my OS to Tiger>then 10.4.6 upd. Then I'll take a shot at installing the new FCP Studio upgrade and see what happens.
Any comments or advice? Otherwise, wish me luck. I'll let you know how this works out with a post here.
Sure wish I could figure out what's going on with my DVDSP v3, though. I really HATE to leave unresolved problems hanging out there. Seems like they always come back to bite you again if you don't deal with them.
Thanks for the help.

Changing contet assiatance pattern lables/placing new button

Hi,
I need help on how to change Label or caption in "contet assiatance pattern"
To put it in other words, as these are events in portal eg:next,review etc etc.. Please let me know step by step process of disabling existing button and adding new button.
This requirement is for ECM- Compensation planning.
Here I need to hide plan button and need to have "print" button.
Thanks,
Srinivas.

HI Whipsnade,
I cant confirm for sure that the AGP voltage is dropping below 0.8v. But it does seem the logical reason when you look at the monitor going into standby and the freezes, yet its 100% stable at 1.5v. (Esp the standby in my optinion shows it most). I have tried some other 9700pros and 3 out of the 4 showed probs at agp 8x (1.1+3.0rev) but none showed probs at agp4x, if i had a non +9700 card that was agp8x i would test it - but i dont. All of the boards showed problems in the Asus p4s8x as well at AGP 8x which is why i think its the chipset to blame.
I had hoped MSI's tech team would have been able to confirm it...or SIS but that seems not to be the case.
ATI are going to speak to MSI now anyway, so i'll find out from ATI what MSI say.
Am i bothered by not being able to use AGP 8x?...enough to RMA the board - no , but i am going to buy a new MOBO as soon as i have some spare cash. And the new mobo will have an Intel chipset -so granite bay looks the best bet. (but due to the non response from MSI im not sure it will be the MSI GB board :-( )
Stu

How to add new button on Add content box in DVT

Hello All,
Currently we are using Dynamic Visitor Tool in weblogic portal 10.3.2 and want to add one new button e.g. "Favorite Portlets" along with portlet list when user clicks on Add Content menu option. Could any one explain what is the exact procedure to do it what are places/files we need to modify.
Thanks in advance.
Alka

Hi,
You will have to use the mixin mechanism provided in dvt. Here are the mixin classes you will need to add and methods to override within them.
Original class - com.bea.wlp.dvt.uikit.wlp.menus.MenuBuilder
Mixin class - com.bea.wlp.dvt.uikit.wlp.menus.MenuBuilderMixin
Your mixin class will look like -
wlp_dvt_dojo.setObject("com.bea.wlp.dvt.uikit.wlp.menus.MenuBuilderMixin", {
buildNavigableMenu: function(scope, allowRemovePlaceables)
     var menuWidget = null;
          var menuWidgets = scope.getDescendants();
               for(var widgetIndex=0;widgetIndex < menuWidgets.length;widgetIndex++)
                    var tempMenuWidget = menuWidgets[widgetIndex];
                    if(tempMenuWidget instanceof dijit.Menu)
                         menuWidget = tempMenuWidget;
                         break;
               if(menuWidget)
                    try
               if(wlp_dvt_WlpResourceDelegateInstance().isResourceUpdateable(scope.model.id))
                    //Change Appearance menu item
                         menuItemArgs = {label:scope.messages.changeAppearance,
                                   iconClass:"com_bea_wlp_dvt_uikit_menu_icon_laf",
                                   onClick:dojo.hitch(null, scope._onChangeAppearance, scope)};
                         mi = new com.bea.wlp.dvt.uikit.wlp.menus.NavigableMenuItem(menuItemArgs);
                         menuWidget.addChild(mi);
                    //Change Layout menu item
                         menuItemArgs = {label:scope.messages.changeLayout,
                                   iconClass:"com_bea_wlp_dvt_uikit_menu_icon_layout",
                                   onClick:dojo.hitch(null, scope._onChangeLayout, scope)};
                         mi = new com.bea.wlp.dvt.uikit.wlp.menus.NavigableMenuItem(menuItemArgs);
                         menuWidget.addChild(mi);
                    //Add Books menu item
                         menuItemArgs = {label:scope.messages.addBook,
                                   iconClass:"com_bea_wlp_dvt_uikit_menu_icon_book",
                                   onClick:dojo.hitch(null, scope._onAddBooks, scope)};
                         mi = new com.bea.wlp.dvt.uikit.wlp.menus.NavigableMenuItem(menuItemArgs);
                         menuWidget.addChild(mi);
                         //Add a menu separator
                         menuWidget.addChild(new dijit.MenuSeparator());
                    //Add Content menu item
                         var menuItemArgs = {label:scope.messages.addContent,
                                   iconClass:"com_bea_wlp_dvt_uikit_menu_icon_portlet",
                                   onClick:dojo.hitch(null, scope._onAddPortlets, scope)};
                         var mi = new com.bea.wlp.dvt.uikit.wlp.menus.NavigableMenuItem(menuItemArgs);
                         menuWidget.addChild(mi);
                         //Set As Default menu item
                         menuItemArgs = {label:scope.messages.setDefault,
                                   iconClass:"com_bea_wlp_dvt_uikit_menu_icon_setAsDefault",
                                   onClick:dojo.hitch(null, scope._onSetAsDefault, scope)};
                         mi = new com.bea.wlp.dvt.uikit.wlp.menus.NavigableMenuItem(menuItemArgs);
                         menuWidget.addChild(mi);
               if(allowRemovePlaceables && wlp_dvt_WlpResourceDelegateInstance().isResourceRemoveable(scope.model.id))
                    if(wlp_dvt_WlpResourceDelegateInstance().isResourceUpdateable(scope.model.id))
                         //Add a menu separator, but only if we have something to separate it from
                         menuWidget.addChild(new dijit.MenuSeparator());
                    //Remove Book menu item
                         var menuItemArgs = {label:scope.messages.remove,
                                   iconClass:"com_bea_wlp_dvt_uikit_menu_icon_delete",
                                   onClick:dojo.hitch(null, scope._onRemove, scope)};
                         var mi = new com.bea.wlp.dvt.uikit.wlp.menus.NavigableMenuItem(menuItemArgs);
                         menuWidget.addChild(mi);
               //If no menu items were added to the main menu, don't render it
                         if(menuWidget.getChildren().length < 1)
                              scope.destroy();
                    catch(e)
                         //handle no DISC or no authentication.
In the abve code, follow the pattern to add a new menuitem in the place where you need it to show up. The method that gets called when the menuitem is clicked will go in the following mixin class -
wlp_dvt_dojo.setObject("com.bea.wlp.dvt.uikit.wlp.menus.NavigableMenuMixin", {
// add the method that gets called when your new menuitem is clicked
Note I haven't run the code above so please check for syntactical correctness before you run it. Also note that, unfortunately, the granularity of the buildNavigableMenu method above is very coarse in that you cannot add new menuitems as small snippets all by themselves. So you will have to include the base menu building code along with your new menu item building code snippet.
Thanks

Creation of new button on same page after insert command

Hello All,
I have an application running on apex.oracle.com where my workspace name is shruti_work,username is [email protected] and password is buwigi. The application name inside this is "app2"
I am trying to achieve one functionality there but unable to get it so felt like seeking an help from experts here. I have two forms there one page1 form which is simplly made on an html region with go button which is navigating the page 1 items value to page 2 but simply passing their address witout updting the database table.
In Page 2 i created page on a table or view, which made some extra buttons which i dont want like applychanges ,delete button, cancel button. I created a create button even which is updating my database with insert sql command. What i am seeing is after my create button is pressed i got navigated to same page 2 which i want to but the applychange button, cancel and delete button got appeared. I dont get the idea why it is so. i have checked the buttons even i didnt found anything there.
All i want is when i press create button in page 2, my database get update and at the same page (2) a new button get appears which i have to use for other things. Approaching to this solution i created a button with giving databse action update and condition to this button "value of item in expression 1 is not null" and in expression 1 i passed p2_id...... but my new button is not getting created.
Any help on this?

Hi Jeff,
I dont want applychanges button and delete button in my page 2. But when i created form on a table or view this but got created and i cannot delete it even. When i am navigating my page from page 1 to page 2 and filling the fields in page 2 and clicking create button, at that time i want after updating my table and running my plsql process which i have created which you can see in page processing, my button at same page get generate which i will use to navigate to other form. This button which i want to generate after clicking my create button will be meaningful only if my record get inserted in table. so that is why i want it at that time.
I dont want any report so i am not creating form on a table or view

New button in lightbox?

I am trying to add a button inside Lightbox to link to a PDF i created and the link name would have [PDF Version] so when the button is clciked it would open a new window that would have the PDF in it.
What i am trying to do as an overall objective is to create a lighbox style menu for the Website i am creating so when the Breakfast link is clicked on it opens a Lightbox group of images. Now i have already gotten Lightbox up i just need to put a link or new button linking to a PDF of the same page but something people can download i would prefer to have a Icon style custome button in the lower center of the lightbox kind of like this
http://i1114.photobucket.com/albums/k528/jeepsguy/WildBoar_Sample.jpg
The website i am working on is
http://creationsmh.com/
that is an old version of it, but when u hover over the menu button u see breakfast lunch and drink links when each is clicked on right now they open up a Lightbox gallery with the abover format.
Please help?

Hello Kevin
Two ideas come into my mind:
(1) You have not selected any node in your ALV tree yet the toolbar function expects at least (exactly?) one node to be selected (NOTE: You may have selected an ITEM but not the node)
(2) Perhaps you have used NODE_SELECTION_MODE = ..._MULTIPLE in the CONSTRUCTOR method and the control expects NODE_SEL_MODE_SINGLE
Regards
Uwe

Adding new button to Standard Page and Launching CP when clicked

Hi,
I have a requirement to add a new button to a standard OAF page and when it is clicked, I need to launch a Concurrent Program. Can you please let me know any links/pointers/documents where I can get the details as how this can be accomplished.
TIA.

anyone?

HT2292 gnature can't can't update new version of itunes due to error message saying invalid siupdate new version of itunes due to error messagecan't update new version of itunes due to error message saying invalid si saying invalid si

can't update new version of itunes due to error message saying invalid si

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Creating new buttons on different frame labels

can someone tell me if im doing something wrong or assigning
the as to the wrong frame?
first off i have all my buttons on frame 2. im creating a
real estate site and i have to have a couple links like HOME ABOUT
BUYING SELLING CONTACT, the thing though is that in the BUYING and
SELLING frames i want to add more sections and links but only on
these 2 other parts of my site. when i code it and add new buttons
to these sections though my movie plays over and over and over non
stop. heres my coding...
FRAME 1 preloader
Frame 2 has a frame label of home and all the buttons on a
diff layer, and AS3 on a different layer
Frame 3 has a frame label for about section
Frame 4 is my contact for example
so if i create a new button in the about frame label and just
add the code to the working as3 code on frame 2 my movie just plays
over and over and over again, and all i want it do do is act like
the other buttons and go to a different frame label down in the
time line. the only way i get it to work is if i have ALL my
buttons on frame 2.
frame 1
my preloader
frame2
home_btn.addEventListener(MouseEvent.CLICK, onHome)
function onHome(event.MouseEvent):void
gotoAndStop("home");
about_btn.addEventListener(MouseEvent.CLICK, onAbout)
function onAbout(event.MouseEvent):void
gotoAndStop("about");
etc....
etc...
i enter my btn code just like this and the buttons on frame 2
work but any new buttons i try and creat and put into different
frames othere then frame label "home" aka frame 2 wont work

correct.
there are lots of ways around it. but they all require the
object to exist when the code executes.
with as3 it's particularly easy to create objects, code for
them and then add them to the display list later when
needed.

Standard New button for creation of bp is not appeared in ic agent bp role's main page.

I have checked in.htm page of ICCMP_BP_MUL_S/BuPaSearchB2B which is getting called in web.
in line no. 45 of .htm page there is condition to check whether new button should be displayed or not, when this condition is true no_bp_create is initial then only new button appears in ic agent.
I have debugged so many times but unable to find out from where no_bp_create flag is populated and in conclusion new button is not appeared .
I think there is some authorization which should be assigned to user for creation of bp so that above said flag (no_bp_create) is not getting populated.
if i am on right track so please let me know which authorization is to be assigned to user so that user can see new button in ic_agent.

Hi Sunny,
The parameter no_bp_create is being set in the do_init_context method of the view controller class of same view but the value is being fetched using a badi.
The authorization to create BP can be enabled by implementing the BADI BADI_CRM_BP_UIU_AUTHORITY (or enhancement spot CRM_UIU_BP_ENHANCEMENT).
Users can be authorized to create/edit data for different UI components using this badi.
In this badi put the condition for the application name may be as (based on your scenario or explore more) cl_crm_ic_bp_constants=>gc_bp_create OR OR cl_crm_ic_bp_constants=>gc_bp_edit and set the value of parameter cv_not_allowed = abap_false. Then you should be able to see the New button.
Regards,
Shobhit

New session was refused due to memory bottleneck

Has anyone had experience with this error and know how to go about fixing it from occuring again?
Error when processing your request
What has happened?
The URL https://____________/zpro was not called due to an error.
Note
The following error text was processed in the system DEV : New session was refused due to memory bottleneck
The error occurred on the application server onebase_DEV_00 and in the work process 0 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
Function: ICF_ATTACH_ITS_PLUGIN of program SAPLHTTP_RUNTIME
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DEV in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server onebase_DEV_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server onebase_DEV_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-https -c: 160 -u: ****** -l: E -s: DEV -i: onebase_DEV_00 -w: 0 -d: 20080822 -t: 094930 -v: ABORT_MESSAGE_STATE -e: New session was refused due to memory bottleneck
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hi ,
I am having an issue related to the query in this thread. Can you please let me know if you any solution for this.
     The following error text was processed in the system : Error occurred while sending data through the HTTP protocol.
     The error occurred on the application server bwdbi_DIB_41 and in the work process 0 .
     The termination type was: RABAX_STATE
     The ABAP call stack was:
Method: SEND_RESPONSE of program CL_HTTP_SERVER_NET============CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
tHE ABOVE IS THE error message. This occurs when we are trying to call the a URL from web report using RRI, where in this url is used for RRI.
Regards
Sudha

How to add a new button in IC tool bar and handle the event for the button?

Hi,
    I am working on CRM 2007 Interaction center. To add a new button to IC toolbar, customizing is available to define a new button and then assign in to the profile.
In SPRO->CRM->IC webclient->Customer Specifc System Modifications->Define Toolbar Buttons, I defined one new button with ID ZSTART.
Now in SPRO->CRM->IC webclient->Basic Functions->Communication Channels->Define Toolbar Profiles , I selected Default profileid and in Generic Layout Buttons Tab, I added the new button ZSTART in Position 3.
     So after completing the customizing when the user logs in using role IC_AGENT, the button (with ID:ZSTART) gets displayed in the IC toolbar too.
      Now on click of this button, I need to create an object.
To do so, I have to catch the event which is raised by this new button.
       Please let me how to implement the event handler for this new button. What will be the event name for this button click event and how I can subscribe for it ?
     Please let me know if anyone of you have already worked on similar requirements.
Regards,
Manas.
Edited by: manas sahoo on Jul 22, 2008 7:49 PM

Hello Manas,
There are a couple of threads in the community that might help you out (if you haven't already found them):
Re: IC Web Client Toolbar
/message/3621917#3621917 [original link is broken]
Regards,
Renee Wilhelm
Edited by: Renee Wilhelm on Nov 6, 2008 7:46 PM

How to add new button in Customized page....

Dear All,
I need to add new button to the page button bar in the UI page.I tried like this in the controller but still i can not get output:
OAPageButtonBarBean oapbb = (OAPageButtonBarBean)oawebbean.findIndexedChildRecursive("OrderPageButtons");
OAButtonBean cancelButton = (OAButtonBean)createWebBean(oapagecontext, OAWebBeanConstants.BUTTON_BEAN,
null, "cancelButton");
cancelButton.setText("Cancel");
oapbb.addIndexedChild(cancelButton);
Is there anything i missedout?
TIA

what you are doing incorrectly is
trying to get the handle to the OAPageButtonBarBean.
This is a named child of the parent bean(OAPageLayoutBean), and what you are trying to do is find it as a indexed child, this should give you a nullpointer excp in this line oapbb.addIndexedChild(cancelButton);
since the handle should be null.
to get the handle to OAPageButtonBarBean, use some like this
pageContext.getPageLayoutBean().getPageButtons();
and then add buttons to it.
Thanks
Tapash.

How can I set a value in a field before create when a New button is clicked

Hi,
I am using
JDeveloper 10.1.3.1.0.3984 and
JHeadstart 10.1.3.1 release 10.1.3.1.26
I have one group and there is a detail group under that group.
From main group to detail group there are 3 field relating those groups.
field1
field2
fieldSEQ (auto-generated by database trigger)
These 3 fields are PK.
In the detail group, there is a New button. So, when the New button is clicked, it tries to create the record with those 3 fields value as those are coming from main group. As a result it's giving the duplicate error as that record already exists in the table.
But I don't want to create the record with that SEQ as that will be created in the trigger.
How can I set the SEQ temporarily any no. (-1) before create when the New button is clicked?
Can anybody help?
Thanks
Syed Jabbar
University of Windsor
Windsor, ON, Canada

Hello Syad,
What I would suggest is setting the sequence number at the creation of the entity object (so in the create() method) by using the database sequence. This way it will always be unique.
So something like:
protected void create(AttributeList AttributeList) {
super.create(AttributeList);
SequenceImpl sequence =
new SequenceImpl("KCP_SEQ", getDBTransaction());
setFieldSeq( sequence.getSequenceNumber());
If this still does not solve it: please go to the ADF Forum since this problem is an ADF problem, not a JHeadstart problem.
Regards,
Evert-Jan de Bruin
JHeadstart Team.

[Feature Request] Better support for new buttons in JUNavigationBar

In my project I use a home made sub-class of JUNavigationBar, which contains some new functionality apart from a new button as well. This button allows me to refresh the currently selected row.
However, since I added this button though a simple this.add(), some of the functionality in JUNavigationBar may get confused.
For example, when I have removed some of the standard buttons but left my own button in place (setHasXXX()), the component index (calculated in JToolBar) and the array index for the buttons in JUNavigationBar may not match. This occasionally causes an ArrayIndexOutOfBoundsException.
In short, what I'm asking for, is a better way to manage buttons on JUNavigationBar. Even making the array of buttons and related methods and such protected in stead of private (so that my sub-class could handle it) would be a good start.

Hi Arno,
I had a similar issue with trying to create a Nav bar with dynamic content. My solution was to leave all the standard buttons in place and to use setVisible(x) to make them appear or not as required.
BTW have you noticed that rollover behaviour isn't consistant ie works for FIRST/LAST etc but not for FIND/QUERY.
Regards
Andy

F-32 new button "Cash Disc Due" in ECC6

Similar Messages

Maybe you are looking for