F-32 : Problem with Open Item selection

Hi,
We have a strange problem with open Item selection for customer clearing in t-code F-32
In My QA system
if I input spl GL indicator ="*" and uncheck Normal OI tick,
the system selects all open items,
(those with spl GL indicator and those without spl GL indicator)
In My Dev system
If I input spl GL indicator ="*" and uncheck Normal OI tick
the system does not select any open items,
Please let me know which setting controls this behaviour ?
Regards
Sachin

Hello,
Check your data in FBL5N for the option "Special GL Transactions". There could be that there is no data in the system with SPECIAL GL TRANSACTIONS.
In F-32, there is no value like *
You need to input right Special GL Indicator. "*" will not work here.
I am sure in both the systems if you put "*" and UNTICK your normal transaction, you will NOT get any items to clear.
Please DOUBLE CHECK whether you have unticked normal transaction.
Regards,
Ravi

Similar Messages

Posting to gl a/c with open item management are not permitted.

hello,
When i run FAGL_FC_VAL it display the report and generate the batch input session.
But when i run the session the error massage appear -
"posting to gl a/c with open item management are not permitted."
When i post the same gl mannually, it doesn't show any error.
The Same Problem appear when i run the session generated from FAGLF101- the regrouping program.
Can any body give some idea, what should be done.
Thanx
Subodh

Hello this is chandu,
When u run the fc val it posts the ex gain or loss to respective a/cs.Means those a/cs are not B/S a/cs.Only B/S a/cs we select open item management which r require to maintain on OI management basis.
So try to maintain other a/cs for ex gain and loss y bcoz once u post any transaction in those a/cs which r created already on O Item mgnt basis u cannot change that again.
Then assign those a/cs to automatic postings and run the rc val again
May it will be useful to u
Thank u

The last time you opened OpenOffice, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again? i have a problem with open office, if I press reopen, nothing happened ans i see always this information on my mac? what ca

The last time you opened OpenOffice, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again? i have a problem with open office, if I press reopen, nothing happened ans i see always this information on my mac? what can I do?

Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Problem with Line Item display of G/L account

Hi,
I am struggling with a typical problem that I have two company codes in two different countries. I have created a tax account with Open Item management and Line Item display in both the company codes.
When I am trying to post vendor invoices, taxes are being posted on line item wise in one company code but not doing so in other company code eventhough the attributes of the G/L account are same.
G/L accounts, tax condition types and account keys are same in both the cases.
Can any body give me an idea to fix the problem.
thanks in advance,
Mallik

HI,
check the condition types you've defined for the both of the countries
sprofin accting-f/a gl sett-tax on sales/pur -basic settings-check cal procd--define cond types
there is a check box named item condition see whether it is ticked for the another company's condn type.
because due to this only it takes the condn item wise.
reward pts if it helps.
Regards

F-44 Open Item Selection

Hello,
A user goes into transaction F-44 to clear a vendor but when she hits Process Open Items and brings her to the "Clear Vendor Select Open Items' screen she does not have the field Company Code in the Open Items Selections box. When other users try the field is there but when she does it only brings up the fields Account, Account Type, Special G/L and Pmt. Advice No. I've checked her user settings in SU01D and they identical to another users. Thanks

Hello,
Check your data in FBL5N for the option "Special GL Transactions". There could be that there is no data in the system with SPECIAL GL TRANSACTIONS.
In F-32, there is no value like *
You need to input right Special GL Indicator. "*" will not work here.
I am sure in both the systems if you put "*" and UNTICK your normal transaction, you will NOT get any items to clear.
Please DOUBLE CHECK whether you have unticked normal transaction.
Regards,
Ravi

Blocking line items while open item selection for clearing

We would like to block open items with one particular special GL indicator during open item selection for clearing. The SAP transaction code is F-32
Regards
Ramesh Nalamada

Hi Ramesh,
Basically, what Meenakshi is saying is that you would have to build a Validation for this using transction code <b>GGB0</b> and stipulate in your condition that whenever any of your intended special G/L indicator is chosen during processing, the system should return an error message saying, for instance "<b>You cannot carry out Manual Clearing for this type of account</b>".
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

Customer Tolerance for all open item selected in an incoming payment.

Hi Experts
I have set a tolerance of 5 $ in OBA3 to be written off to Bad Debts account. This settings are working fine when an incoming payment is entered in F-28.
My requirement is, in F-28 I enter the Document Date, Posting Date, Company Code, Currency, REF, Doc.Header Text in the document header & enter the Bank Account, Amount and Text, then instead of entering the customer account in open item selection, I selet the process open items and Select the Reference as the selection criteria and enter a list of references (for clearing a Batch of open items for different customers).
Standard tolerance functionality will check if the complete incoming document meets the specified tolerance limits set in OBA3. But I want the tolerance of 5 $ specified to be applied for all the open items selected to be cleared with the incoming payment.
I understand that tolerance will be applied when the amount entered and amount of the open items (total) is within the specified tolerance.
But is there any option which will check if each of the open item selected for processing short of 5 $ and then write off to the bad debt account specified in OBXL.
Do we have any user exit, or BADi or can we use any of the BTE functionality to achieve this.
Kindly give your valuable inputs..
Thanks in Advance.
KIM Khan.

Kim,
Did you get answer to this question? If so can you please share with me?
Thanks

Postings to G/L accounts with open item management are not permitted

Dear all,
i am getting one error FB01L ledger specific posting for ledger group L2 ledger (IFRS) error is "postingst o GL accounts with open item management are not permitted " i am posting both gl accounts are balance sheet account, please help me how to resolve the problem .
Message no. FAGL_POST_SERVICE012
Reregards
rajashekhar

Dear all,
Thanks for reply, The error message appears FAGL_POST_SERVICE012 because it is generally not permitted to use the O/I managed account as an adjustment account.It is not possible to post on Individual Ledger (on a Leading or non-leading) on OI Account. This is for your informations
We want to post ledger specific for L2 ledger i am getting above error can help me how to sovle the problem , otherwise any alternaitve solution for posting L2 Ledger

ASKBN - Postings to G/L accounts with open item management are not permitte

Hi All!
I have a problem: I run the transaction ASKBN (periodic asset postings) and receive the message about error: "Postings to G/L accounts with open item management are not permitted".
Please let me know how correctly run the transaction?
Thank.

Hi,
if you would have posted this information with your opening post, it would have been more helpful. How should the community know this detail?
Regards,
Markus

Problems with opening Acrobat Pro 9 PDF files

Hi. We use Acrobat Pro 9.0.0 to convert our product documentation Word files into PDFs. During the last weeks our customers report more and more problems with opening these files. We usually deliver those on a DVD with Acrobat Reader 5 or another older version. (Please don't ask me why we're still on these old versions!) Did anyone experience similar problems with Acrobat Pro 9 PDF files and older versions of the Acrobat Reader? Does Acrobat Pro 9.0.0 work smoothly with the newest Acrobat Reader 9.1 download?
Please post your comments. Thx a lot - Kay

I would recommend distributing higher version of Reader as version 5 is just too old but looks like you can't go there.
Acrobat 9 PDFMaker and Adobe PDF printers by default create PDF 1.5 compaible files. PDF 1.5 compatible files can be opened only in Acrobat 6 and above. That's probably the reason why your customers can't see the contents.
What you can do is to change your conversion settings to produce PDF 1.4 compatible files:
- In Word, select Acrobat tab or Adobe PDF menu (depending on your version of Word), select Settings
- Select "advanced settings" in the dialog that comes up
- Choose compatibility as "Acrobat 5", PDF 1.4
IF you print to Adobe PDF printer, you'll find a similar setting in the print dialog.

InDesign refuses to update via Creative Cloud - each attempt fails within 30 seconds - no problem with other items - any suggestions?

InDesign refuses to update via Creative Cloud - each attempt fails within 30 seconds - no problem with other items - any suggestions?

What is the error message you receive?
There is a manual way to do updates - All Adobe updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/

HT1338 I have a problem with opening downloaded files from the internet; zip types. Can you tell me an app to open these types of formats of files?

I have a problem with opening downloaded files from the internet; zip types. Can you tell me an app to open these types of formats of files?

It should unzip if you double-cick.
What are you seeing happen when you do that?
Select a .zip file in the Finder and Get Info (cmd-i). What is set for it to Open With. It should be Archive Utility.

Posting to G/L accounts with open item management not permitted Fagl_post

Dear Expert,
When i run the foreign cur rev. through FAGL_FC_VAL then system is not post the currency rev on open item on GL account. It showing subject message and also show below mesaage:-
Message no. FAGL_POST_SERVICE012
Diagnosis
You use GL account 210012 in company code 1000 with open item management. However, posting are not permitted G/L accounts in individual ledger with open item management.
Please advice on this issue.
Thanks & Regards,
Pankaj

Hello Pankaj,
Is your adjustment account was defiined as OI management. if yes, then t is generally not permitted to use the O/I managed account as an djustment account. The adjustment account is the same as O/I
managed GL account, so the error message FAGL_POST_SERVICE012 is issued. This is justified because open items must be made valid for ALL ledgers in the client but FAGL_FC_TRANS posts ledger specific posting by having ledger group in the document header - Ledger Grp 0L.
The best solution is to assign non-O/I managed account as an adjustment account, and this is the 'standard' solution.Please also check note 884639.
Best Regards,
Gladys xing

Account type M and G/L account with open item management not permitted

Hi,
I am getting the following error while applying VL02N (PGI) is "Account type M and G/L account with open item management not permitted". Before I got an error like posting period and I have closed those posting periods 2008/08 and 2008/07. Now I am getting this error.
Please provide the solutions to overcome this and I want to execute the full transaction.
Thanks in ADVANCE.
Kishore

Hi Kishore,
Please check these threads
Account type M and G/L account with open item management not permitted
Re: Account type M& GL with open item managment not permitted error
Posting to G/L accounts with open item management are not permitted
Hope this would help you.
Good luck
Narin

Postings to G/L accounts with open item management are not permitted Messag

HI All,
Me activiated New GL. and when I am trying to post the
document, I am getting the below error.
The GL used 200100 is Cash A/c (40)
Cr Eq Share Capital A/c (50)
As Cash A/c requires Clearing, I have activated "Open Item Management".
Can you advice me why Its giving me the below mentioned error.
Thanks
Postings to G/L accounts with open item management are not permitted
Message no. FAGL_POST_SERVICE012
Diagnosis
You use G/L account 200100 in company code RLIF with open item
management. However, postings are not permitted to G/L accounts in
individual ledgers with open item management.
Procedure
If you have not yet made any postings to this account and if the
account is to be used for closing processes in non-leading ledgers,
deactivate the Open Item Management indicator in the company code data
for the G/L account.
Thanks,
Niranjan Yandamuri

Hi,
Please, refer to note 1646466 for the info on this message.
Regards,
Eli

F-32 : Problem with Open Item selection

Similar Messages

Maybe you are looking for