F110/AP payment problem

Hi
While running the payment proposal this error message popped.
For vendor customer xxxx ,
Payment with currency USD, payment method : No valid payment procedure .
Now I am aware with this problem as it is a very frequent error on this site with foreign currency. Typically this happens when we deal with a vendor in new country or new currency or new payment method. Then I go to FBZP and add map currency with bank and payment method, etc.
This particular case , the vendor is local and we pay thru USD. I created a new invoice for a different vendor (yyy) with same House bank ,currency (USD ) and payment method (c) . I ran the proposal and it went well for another vendor but again got this error in log for only this vendor (xxxx) .This vendor. Only changes have been in March it's payment terms. I checked the vendor master and compared the problem vendor with cleared vendor and found that problem vendor is having missing Bank data. But for Check payment why the bank data should matter?
based on my debugging , it's a vendor issue as I am able to make check payment to other local vendor (US vendor ) with same house bank. Now I have checked the vendor master details and found that House Bank , payment Method is there. Now what I am missing? Please give ideas as ran out of ideas. I have tried my best and dont find any thing unusual.
Thanks
SN
Message was edited by:
satya kantiwal

Problem got resolved. Here is the brief description of the problem and suggested solution.
Description of problem:
1.User had changed the address and other details of this vendor in March. The old address was xx and new address is yy. But in the new address Street address or PO Box address was not typed. If these are checked originally then you have to fill those fields. Otherwise SAP log will give a generic message that payment method is missing.This I found on this forum on another thread.
Solution: I have typed dummy Street and given some PO Box # 1000 (dummy ) and informed User to get it corrected. In the mean time I ran the proposal with dummy street address and PO Box. It ran successfully. So the problem is solved currently.
Thanks
SN

Similar Messages

Run date problem in F110 - automatic payment program

Hi.
I am trying to run the automatic payment program in F110. I am facing the problem with the run date in this transaction. System is not giving me any error if i give the run date as today's date or future date.
But in run date if i give previous date system is not executing the automatic payment program.
Eg: Inovice posted on 01.01.2012. It becomes due on 01.01.2012. I gave run date as today's date 04.01.2012 or future date the system is executing correctly picking all invoices. But if i give the run date as previous to the current date i.e., 02.01.2012 or 03.01.2012 then system is not executing this transaction.
This problem is coming for all company codes. So if there is any setting for restricting run date request you to help me in this regard where can i do such setting.
Regards,
Padmavathi

Hi.
My problem is solved.
Actually client is entering the documents with posting date for earlier months whereas he has entered the documents this month.
Therefore system is not picking the invoices in F110 - automatic payment program.
Actually the run date entered is getting copied to the parameters entered i.e., posting date and documents entered upto date.
Documents are entered in the system this month with posting dates of previous months. Therefore if i give the run date as this month date the run date is getting copied to doc entered upto date in the parameters tab as this month date. So only system is not picking invoices since invoices are entered in the system this month only.
Now we changed the date for doc entered upto with previous month date and system is picking the invoices.
Thanks a lot for your help.
Regards,
Padmavathi

F110 AUTOMATIC PAYMENT PROGRAM NOT PICKING PAYMENT METHOD

hi guru's
F110 - Running payment program proposal list going to exeption list , House bank not picking up from VENDOR master. if not maintaing house bank in vendor master
proposal list is coming but 2nd house bank picking but i need 1 house bank. i maintained ranking order in FBZP.
pls suggest me this issue.
raj.

Hi,
I had an other problem with payment methods and in that case it was important how you fill it in the vendor and in the payment run. prhaps this helps you to found a solution or to understand how it is working
I have set-up a new payment method "E" for splitting euro payments under EUR 50,000 (K is for the other and non iban payments)
For this I have made the following settings in the Bank determination:
PM Rank order House bank
E 1 733BE
K 2 733BE
In the vendor masterdata I will fill in EK (to make it easy for users)
When I run the payment method with KE the system is using K and not E. when I fill in EK the IBAN payments are going with E and and the other one's with K what is correct.
Why is the Rank order not working for this? (look first to E and when E is not permitted go use K)
Paul

F110 (Automatic payment transactions)

Hi
I am having a problem using a transaction: F110 (Automatic payment transactions)
I need to create a payment method type D.
Configuration of Display proposal:
Customer:
                Doc. Number    Doc type       Debit/ Credit   Amount
     00000               CR                   H                     10,00
                00000               RV                   S                   166,67
When execute it:
     Result: It does not appear nothing in SP01 or SM37. I need to create the document to client get to pay.
What should I do ?

Hi Rukshana
There is a variant for the programs and I get to make a general proposal and generate a spool but only in this situation: Configuration of display proposal: When only have a Doc Number.
In my case I want to make a proposal using two doc. numbers Debit / Credit. Result: the payment document does not appear in the spool to client consequently there is not payment document to client.
Best regards
Edited by: Ailton Fabricio Dias on Jan 11, 2009 2:28 AM

How to check F110 - automatic payment transaction

Dear gurus,
I had to execute the T-code F110 ("automatic payment transaction).
I'd like to check/verify if I have correctly entering the datas.
Is there a mean to check?
After throwing the proposal and the payment I have the following message : "Posting orders: 2 generated, 2 completed".
What does it mean?
How can I check/verify the recision of my enteries? Is there a transaction that I can execute to verify?
Thanks,
Regards,
gul

Hi
For the 'Red' Line item in F110, check the proposal log & the payment log for the details of the error message.
The error may be due to these common problems:
- Bank data not maintained properly
- Vendor master not updated for payment method or house bank
- house bank settings & FBZP configuration improper (go thro the FBZP settings fully for that payment code - house bank combination)
For the other open items in FBL1N which are not processed in F110, it may be due to the foll reasons:
- Either they are not due as on the date mentioned in F110
- Parameters enetered in F110 don't fufil those documents (like house bank, payment method, etc).
Regards
Srini

Check posing date on F110 Automatic payment

Hi Guru
I have some problem on transaction code F110 (Automatic payment program) . Can the program selection check posting date of invoice document not more than field "Docs entered up to" ?

Yes, the system checks that the invoices selecte should not have posting date greater than "Docs entered up to"
Regards,
SDNer

Typical Batch payment problems

Typical Batch payment problems
Can anyone describe the various problems they have faced when running typical batch payment and how they resolved them?

Dear expert,
Currently we are not using tcode F110 for payment transaction. Is there any documentation on how to use transaction F110?.
Thanks.

F110- Automatic Payment. 2nd ranking bank not selected

Dear Experts,
I need your help here.
During the F110 (check payment), those banks customized as 2nd,3rd,4th or subsequent bank ranking could not produce any payment advice and checking printing. Where has goes wrong?
If I change the 2nd ranking (Citibank) to 1st ranking, then Citibank will works well.
I wonder why the F110 only takes the 1st ranking bank.
Please help.
Will assign points for solutions.
Thanks a lot in advance.

Hi Nitin,
You mean the available amount for each house bank?
I have alraedy maintained the amount for each house bank at a very high amount and the F110 payment is not exceeding the amount set.
Please help.

F110-Automatic payment program payment made in other countries

I have 50 Company codes(Different countries) and one paying company code(US). Now i want to set up FBZP config. .. what should i do to enable the inter-country/inter-company payments using F110(Automatic Payment Program).

Hi Ashish,
In step 1 of FBZP, i.e. "All company code", when i try to enter a "New Entry", and when i try to set paying company code(which is in US) for other company codes that are outside US, i get the following error.
"Company code <paying company code> is not permitted as the paying company code
Message no. F3063
Diagnosis
The paying company code and the company code on whose behalf the payment is being made must be in the same country, have the same local currency, and display the same currencies managed in parallel. The setting regarding extended withholding tax functions (active or not active) must also be identical for both company codes.
System Response
The entry is not accepted since these requirements are not met.
Procedure
Correct your entry.
Please advice

F110 automatic Payment for Customer

Hi,
I want to pay to a customer for the credit memo thru' F110 automatic payment program.
If I maintain the document number in the 'free selection' tab then there is a error during proposal *'company codes xxxx/xxxx do not appear in the proposal 04.07.2008,test; correct'*, but if i do not maintain any document number then there is no error, the proposal is successful.
I have double checked the document numbers in the free selection tab.
Any help.
Thanks
Suresh

I noticed there was a mistake in the document number.

F110 - Automatic Payment (User Exit, BTE, BADI)

I have requirement after generating payment document by F110 automatic payment. I need to send data to other system.
How to get all payment documents? Can I use a BTE, User Exit or BADI? Kindly help me.

Hi ,
You can create a DMEE or genrate Idoc to another system .
If you want to send excel file then you can create a dmee file in transaction DMEE with same formt provided by bank/ another system .
many Thanks

F110 - Automatic Payment Run - Checks Will Not Print!!

Hi!
My client executed transaction F110 - Automatic Payment Run for a range of vendors (100000 - 599999). He was able to execute the run but could not print checks and found out that payments weren't assigned check numbers in the system. However, payments were cleared off the vendors account as if they had been paid.
Please help!!
Tks,
Deki

Hello
did you assign a variant in the prinout/data medium tab?
you need to assing the proper house bank, account id and check lot in this variant.
If this is correct then you should get the check number assigned to the payment
document #.
Points will be appreciated
Regards,
Zaid Azam

Error in( F110) Automatic payment Program

Hi,
while posting the payment through (F110) Automatic payment program , i have got the Error that
" Error in creating the payment document; read job log"
please help me out
Thank you

Hi,
could you please check carefully the exception list and the payment/proposal log in F110, in which you can find the reason why it included in the "exception list".
Did you activate the Additional Log? what does the log say?
You should analyze the proposal log in detail in this case. Also could you please ensure that this vendor is not blocked for payment and you have not entered the Payment block in the affected documents.
regards Bernhard

Transaction F110 - Automatic Payment

Hi !
In Transaction F110 - Automatic Payment when i execute a proposal for payment of 'XXX' vendor, then in the execute of the next proposal vendor XXX won't participate despite i enter vendor XXX in the range of vendor select option field. Is in SAP away ( USER-EXIT, BADY, customization ) to prevent it ? meaning to cause SAP to participate a vendor also in next proposal ?
Please answer a detailed answer of how to do this.
thanks
moshe

Hi Solman,
Couldn't get your question, u are saying that u ahve assinged the vendor in a Payment run ,
Do u mean that u run a Payment run for a particule vendor and after finishing it
you again run the Payment proposal for the same vendor.
If you wish that the vendor you have entenred shouod eb stoed and used for the next payment run, i think thats not possible
Cheers
S
Message was edited by: sushi

F110 Automatic Payment Run Scheduling

Hello SAP Crew!
I know in SAP F110 we can schedule future date runs for proposal and Payment Runs but .. my question is there a way to schedule recurring Proposals and Runs.
Scenario:
Payment program should run every 3rd Monday of the month as scheduled
Now, would I have to make a new ID for each month and just schedule it or is there a better way?
Thanks!
Points will be assigned!

Hi,
Maybe you need a new customer program, which to execute on a cetain conditional date report F110S - Schedule Payment Program Periodically . This program could be run as daily job.
Svetlin

F110/AP payment problem

Similar Messages

Maybe you are looking for