F110 - Automatic payment Program Vendor /Customer Clearing
I have entered all the settings related to the Vendor/Customer clearing.
1.Entering the Vendor and Customer account numbers in the relevant master records.
2.Activating the clearing with Vendor/Customer in both master records.
But when F110 is executed,the customer line items are thrown in the exception list.The line items are all due on both the sides.When i reallocate the customer line item,it is giving the option of deducting it from the Vendor line item.
It has to do autmotically and pay the balance amount to the Vendor,instead of doing it manually.
Request to contribute your ideas for solving this issue.
Regards
Sunil
Hii Neeraj,
The error says it consists of the debit balance.But the settings are already made in both the vendor and customer records.But if we click the execption item and reallocate ,it is accepted to deduct it from the vendor line item.
Thanks and Regards
Sunil
Similar Messages
-
F110 Automatic payment program for customer.
i want to generate BOE for customer with interest document.
i had post invoice and interest document and based on this two document i want to generate one sp. g/l document i.e.BOE.
but instead of one document, system generate two document i.e separate for RV and interest posting.
and i want to post single documet in g/lI noticed there was a mistake in the document number.
-
Automatic Payment program -line item cleared not displaying in table
automatic Payment program -line item cleared not displaying in table
i have re run the APP program DUSR1 same earlier it has run twice but table dose not show double payment to vendors how to resolve the issue.
Can some one please guide me on this.Hi Priyanka,
First, which table are you referring to. If your fist APP run clears the line item, it will no longer be available in the open item.
Please be more specific on the problem so that we can try to help you. If possible, please provide screenshots.
Regards,
Ganesh -
Error in( F110) Automatic payment Program
Hi,
while posting the payment through (F110) Automatic payment program , i have got the Error that
" Error in creating the payment document; read job log"
please help me out
Thank youHi,
could you please check carefully the exception list and the payment/proposal log in F110, in which you can find the reason why it included in the "exception list".
Did you activate the Additional Log? what does the log say?
You should analyze the proposal log in detail in this case. Also could you please ensure that this vendor is not blocked for payment and you have not entered the Payment block in the affected documents.
regards Bernhard -
F110-Automatic payment program payment made in other countries
I have 50 Company codes(Different countries) and one paying company code(US). Now i want to set up FBZP config. .. what should i do to enable the inter-country/inter-company payments using F110(Automatic Payment Program).
Hi Ashish,
In step 1 of FBZP, i.e. "All company code", when i try to enter a "New Entry", and when i try to set paying company code(which is in US) for other company codes that are outside US, i get the following error.
"Company code <paying company code> is not permitted as the paying company code
Message no. F3063
Diagnosis
The paying company code and the company code on whose behalf the payment is being made must be in the same country, have the same local currency, and display the same currencies managed in parallel. The setting regarding extended withholding tax functions (active or not active) must also be identical for both company codes.
System Response
The entry is not accepted since these requirements are not met.
Procedure
Correct your entry.
Please advice -
Run date problem in F110 - automatic payment program
Hi.
I am trying to run the automatic payment program in F110. I am facing the problem with the run date in this transaction. System is not giving me any error if i give the run date as today's date or future date.
But in run date if i give previous date system is not executing the automatic payment program.
Eg: Inovice posted on 01.01.2012. It becomes due on 01.01.2012. I gave run date as today's date 04.01.2012 or future date the system is executing correctly picking all invoices. But if i give the run date as previous to the current date i.e., 02.01.2012 or 03.01.2012 then system is not executing this transaction.
This problem is coming for all company codes. So if there is any setting for restricting run date request you to help me in this regard where can i do such setting.
Regards,
PadmavathiHi.
My problem is solved.
Actually client is entering the documents with posting date for earlier months whereas he has entered the documents this month.
Therefore system is not picking the invoices in F110 - automatic payment program.
Actually the run date entered is getting copied to the parameters entered i.e., posting date and documents entered upto date.
Documents are entered in the system this month with posting dates of previous months. Therefore if i give the run date as this month date the run date is getting copied to doc entered upto date in the parameters tab as this month date. So only system is not picking invoices since invoices are entered in the system this month only.
Now we changed the date for doc entered upto with previous month date and system is picking the invoices.
Thanks a lot for your help.
Regards,
Padmavathi -
F110 Automatic Payment program
Hi ,
We have an issue in th Automatic payment program F110.
We have a few vendor invoices ( 1500 euros ) for a vendor X. There is also a credit memo for that vendor (100 Euros ). When we run F110 the credit memo is going to the Exception list with an error message "001 No pymt possible because items with a debit bal.still exist "; and the invoices for 1500 euros had been paid.
Please let us know why the payment program could not net off the Credit memo against the invoices making into a payment of 1400 Euros only to the vendor.
Your response would be much appreciated.
Thanks
Balaji
Edited by: Balaji Dhanave on May 15, 2009 12:53 PMHi,
You will first have to CLEAR the credit memo for that vendor (100 Euros) against the invoice raised and then run the payment run for the balance credit amount. Payment run will not execute if it finds any debit balance as open item for the vendor.
Thank You. -
F110 Automatic Payment Program- restrict items per payment document
Hi,
I want to know whether it is possible to restrict number of invoices to be paid in one payment document.
Scenario:
Suppose a vendor has 25 invoices to be paid normally all the invoices would be paid thru' one payment document but my client wants to restrict the number of invoices in one payment document as 10.
Is there any config to be maintained in FBZP?
I hope I am clear in my query.
Thanks
SureshHello Suresh,
I feel that the number of items to be processed in a payment run cannot be restricted.
Please go through the below link to understand the various processing settings for the automatic payment program.
http://help.sap.com/saphelp_46c/helpdata/en/47/8bf634b576bc4ee10000009b38f83b/frameset.htm
With Regards
Vijay Gajavalli -
Automatic payment program for customer
Hello!
I have the next issue: I want to pay physically (give money from bank) to somebody (a commission). In the system, this person is defined as customer. Can I use the automatic payment program for a customer(as it is in SAP system) and send the payment to MultiCash in order the money can go out from my account?(I want to really pay somebody defined as a customer and use the APP and Multicash)
Thank you!Yes, as long you have an open item on the customer account that needs paying.
In F110 you see vendor_and_customer in the parameter screen.
Hth
Hein -
FI-AP - (Automatic Payment Program - Vendors) - Cheque Re-Assignment
Hi Experts,
Can some help me on a real-time issue on FI-AP Accounts Payables - Vendors - Automatic Payment Program - Cheque Re-Assignment Problem - which I am facing.
I have assigned a wrong cheque No. to a payment document through automatic payment program. Actually, this Cheque No. should be assigned to some other payment document.
How, can I release / set free this cheque no. and re-assign it to some other payment document.
I will awards points with an open heart.
Thanks & Regards
Rajeev SharmaHI,
As u r use the automatic payment program - and when u use the automatic payment program the check number are assign in automaticly.
So this are assign when u do the check printing. So once u think the wrong number are printed , u have to void the check number and write manual check and assign to the line item.
FCHE - Voided Checks
FCH5 - Manual Checks : Write manual check
hope this is clear Assign some points.
With regards
Krishna Singareddy -
F110 AUTOMATIC PAYMENT PROGRAM NOT PICKING PAYMENT METHOD
hi guru's
F110 - Running payment program proposal list going to exeption list , House bank not picking up from VENDOR master. if not maintaing house bank in vendor master
proposal list is coming but 2nd house bank picking but i need 1 house bank. i maintained ranking order in FBZP.
pls suggest me this issue.
raj.Hi,
I had an other problem with payment methods and in that case it was important how you fill it in the vendor and in the payment run. prhaps this helps you to found a solution or to understand how it is working
I have set-up a new payment method "E" for splitting euro payments under EUR 50,000 (K is for the other and non iban payments)
For this I have made the following settings in the Bank determination:
PM Rank order House bank
E 1 733BE
K 2 733BE
In the vendor masterdata I will fill in EK (to make it easy for users)
When I run the payment method with KE the system is using K and not E. when I fill in EK the IBAN payments are going with E and and the other one's with K what is correct.
Why is the Rank order not working for this? (look first to E and when E is not permitted go use K)
Paul -
F110 - Automatic Payment Program - Payment Proposal Error
Hi Folks,
I am running Automatic Payment Program on F110. I have completed all the procedure in FBZP.
The Error is
Company codes ZZZ1/ZZZ1 do not appear in proposal 07/30/2008 RUN01; correct
Its says,
No data exists for the specified paying company code ZZZ1 and the specified sending company code ZZZ1 in payment proposal 07/30/2008 RUN01.
It will be helpful, if someone can post the remedy.
Help will be surely rewarded.
Thanks,
MatthewHi,
The dates are not falling in the run date. So please change the dates in the Parameters tab in F110 i.e Posting Dates and Doc. Posted upto.
Regards
Balaji -
Assignment of Banks in F110(Automatic Payment Program)
Hello All,
I have a specific requirement while assigning the due items to the House Banks in Automatic Payment Program.
Requirement is like below.
There are 2 vendor line items which are due for payment in the APP.
Vendor Amount
1000 u20AC 325
2000 u20AC 2750
House Banks and Ranking Order and available amounts are like below.
Bank * Ranking Order* * Amount*
CITI 1 3000
HSBC 2 4000
As per the Standard SAP, the allocation happens based on the Vendor no. So it will be like below
Vendor 1000, amount u20AC 325 has been assigned to House Bank CITI(after this allocation, bal. available is 2675 in CITI)
For Vendor 2000, amount u20AC2750, the Bank assigned will be HSBC(as there is no sufficient balance in CITI).
Our requirement is as below(Sort the items based on the amount), so it would be like below
Vendor 2000, u20AC 2750 should be picked from Bank CITI(Ranking Order 1, after this the available balance is u20AC 250)
Vendor 1000, u20AC 325 should be picked from Bank HSBC(as there is no sufficient balance available in CITI).
Is there any standard user-exit or BTE that helps here.
Any pointers to handle this situation.
Thanks and Regards
Balaji KancherlaHello Gaurav,
Thanks for your reply.
BTE 1810 is not helpful in this case. This is more towards selecting the partner bank in each individual line items. Our objective is to sort the line items based on the amount(not on Vendor No. LIFNR).
Best Regards
Balaji Kancherla -
I am one promblem for automatic payment program for customer
Job log overview for job: F110-20070426-HL -X / 11421401
Date Time Message text Message class Message no. Message type
4/26/2007 11:42:14 Job started 0 516 S
4/26/2007 11:42:15 Step 001 started (program SAPF110S, variant &0000000002084, user ID GAYATRI) 0 550 S
4/26/2007 11:42:15 Log for proposal run for payment on 04/26/2007, identification HL FZ 402 S
4/26/2007 11:42:15 Customer 100199 G555 is contained in proposal 04/26/2007 W1; no editing FZ 348 S
4/26/2007 11:42:15 > FZ 693 S
4/26/2007 11:42:15 > Additional log for customer 100196 company code G555 FZ 692 S
4/26/2007 11:42:15 > FZ 693 S
4/26/2007 11:42:15 > -
Due date determination additional log FZ 799 S
4/26/2007 11:42:15 > Document 8001 line item 001 via INR 12,000.00 FZ 700 S
4/26/2007 11:42:15 > Terms of payment: 04/14/2007 0 0.000 % 0 0.000 % 0 FZ 701 S
4/26/2007 11:42:15 > Customer receivable is payable on 04/14/2007 with cash discount terms 1 FZ 706 S
4/26/2007 11:42:15 > Include customer items due by 04/26/2007 FZ 733 S
4/26/2007 11:42:15 > Item should be paid now FZ 709 S
4/26/2007 11:42:15 > Item is due with 0.000 % cash discount FZ 721 S
4/26/2007 11:42:15 > FZ 693 S
4/26/2007 11:42:15 > -
Due date determination additional log FZ 799 S
4/26/2007 11:42:15 > Document 8006 line item 001 via INR 1,001.00 FZ 700 S
4/26/2007 11:42:15 > Terms of payment: 04/16/2007 0 0.000 % 0 0.000 % 0 FZ 701 S
4/26/2007 11:42:15 > Customer receivable is payable on 04/16/2007 with cash discount terms 1 FZ 706 S
4/26/2007 11:42:15 > Include customer items due by 04/26/2007 FZ 733 S
4/26/2007 11:42:15 > Item should be paid now FZ 709 S
4/26/2007 11:42:15 > Item is due with 0.000 % cash discount FZ 721 S
4/26/2007 11:42:15 > FZ 693 S
4/26/2007 11:42:15 > -
Due date determination additional log FZ 799 S
4/26/2007 11:42:15 > Document 8007 line item 001 via INR 2,001.00 FZ 700 S
4/26/2007 11:42:15 > Terms of payment: 04/16/2007 0 0.000 % 0 0.000 % 0 FZ 701 S
4/26/2007 11:42:15 > Customer receivable is payable on 04/16/2007 with cash discount terms 1 FZ 706 S
4/26/2007 11:42:15 > Include customer items due by 04/26/2007 FZ 733 S
4/26/2007 11:42:15 > Item should be paid now FZ 709 S
4/26/2007 11:42:15 > Item is due with 0.000 % cash discount FZ 721 S
4/26/2007 11:42:15 > FZ 693 S
4/26/2007 11:42:15 > -
Due date determination additional log FZ 799 S
4/26/2007 11:42:15 > Document 8008 line item 001 via INR 3,001.00 FZ 700 S
4/26/2007 11:42:15 > Terms of payment: 04/16/2007 0 0.000 % 0 0.000 % 0 FZ 701 S
4/26/2007 11:42:15 > Customer receivable is payable on 04/16/2007 with cash discount terms 1 FZ 706 S
4/26/2007 11:42:15 > Include customer items due by 04/26/2007 FZ 733 S
4/26/2007 11:42:15 > Item should be paid now FZ 709 S
4/26/2007 11:42:15 > Item is due with 0.000 % cash discount FZ 721 S
4/26/2007 11:42:15 > FZ 693 S
4/26/2007 11:42:15 > -
Due date determination additional log FZ 799 S
4/26/2007 11:42:15 > Document 8009 line item 001 via INR 4,001.00 FZ 700 S
4/26/2007 11:42:15 > Terms of payment: 04/16/2007 0 0.000 % 0 0.000 % 0 FZ 701 S
4/26/2007 11:42:15 > Customer receivable is payable on 04/16/2007 with cash discount terms 1 FZ 706 S
4/26/2007 11:42:15 > Include customer items due by 04/26/2007 FZ 733 S
4/26/2007 11:42:15 > Item should be paid now FZ 709 S
4/26/2007 11:42:15 > Item is due with 0.000 % cash discount FZ 721 S
4/26/2007 11:42:15 > FZ 693 S
4/26/2007 11:42:15 > -
Payment method selection additional log FZ 699 S
4/26/2007 11:42:15 > Payment method selection for items due now to the amount of INR 22,004.00 FZ 601 S
4/26/2007 11:42:15 > Payment method "{" is being checked FZ 603 S
4/26/2007 11:42:15 > Bank details are being checked FZ 640 S
4/26/2007 11:42:15 > Customer/vendor bank details are being read FZ 644 S
4/26/2007 11:42:15 > Customer/vendor bank details are being checked FZ 665 S
4/26/2007 11:42:15 > Customer/vendor does not have any allowed bank details FZ 651 S
4/26/2007 11:42:15 > No permitted payment method exists FZ 608 S
4/26/2007 11:42:15 Information re. customer 100196 / paying company code G555 ... FZ 306 S
4/26/2007 11:42:15 ... payment not possible because of reported error FZ 311 S
4/26/2007 11:42:15 > FZ 693 S
4/26/2007 11:42:15 > Additional log for customer 100200 company code G555 FZ 692 S
4/26/2007 11:42:15 > FZ 693 S
4/26/2007 11:42:15 > -
Due date determination additional log FZ 799 S
4/26/2007 11:42:15 > Document 4003 line item 002 via INR 500.00- FZ 700 S
4/26/2007 11:42:15 > Terms of payment: 04/26/2007 0 0.000 % 0 0.000 % 0 FZ 701 S
4/26/2007 11:42:15 > Item is clearable from 04/26/2007 with payments FZ 707 S
4/26/2007 11:42:15 > Include customer items due by 04/26/2007 FZ 733 S
4/26/2007 11:42:15 > Item should be paid now FZ 709 S
4/26/2007 11:42:15 > Item is due with 0.000 % cash discount FZ 721 S
4/26/2007 11:42:15 Due items with currency INR, pmnt method - items total is < 0 FZ 328 S
4/26/2007 11:42:15 ...none of the payment methods defined can be used for these items FZ 347 S
4/26/2007 11:42:15 Information re. customer 100200 / paying company code G555 ... FZ 306 S
4/26/2007 11:42:15 ... payment not possible because of reported error FZ 311 S
4/26/2007 11:42:15 End of log FZ 398 S
4/26/2007 11:42:16 Job finished 0 517 S
plz u help me........Hi
In FBZP, "payment method - country ' step, please check the payment methods you have defined. please check if radio buttn of rincoming payment method is ticked. e.g if in the customer master record, payment method, C is given then check if it is defined as Incoming method in above step.
pushkaraj -
F110S - Automatic Payment Program
I am working on scheduling Automation for the client.
I noticed that F110S does not create a proposal. However, there is an option to check mark the proposal, but then the program won't run the payments. We intend F110S to carete a proposal as well as post the payment automatically. Please let me know if that is possible.
Regards,
KHi
SAPF110S can be automated.
Define tasks and plan the same through Financial Calender ( One option )
Financial Accounting >Global Settings>Financial Calender>Define Tasks
Check, hope it works
Reg
Suresh
Maybe you are looking for
-
How can you images replacable in a PDF?
I want to be able to create high quality and professional looking PDF's and for the client to be able to change text and images. The text is no problem, creating editable forms is easy and not hard to achieve. But I want to swap images easily. I want
-
How do I backup a large music library to two smaller drives?
Does anyone know if it is possible to split a library in half, when backing up? I have an external 1000 gig lacie drive that is the home of my itunes media folder location. I also have two smaller lacie drives that put together could have enough spac
-
I am not sure what is going on, but my iPad 3G (16 gig) has become at times completely unresponsive. It gets so bad that pushing wake/sleep or home has no response for minutes at a time. I have updated to iOS 3.2.2 a while ago. I noticed instances of
-
Use Table and atthacment and sending mail
Hi , With help from this forum i success in sending mail with internal and other program that send mail with attachment, now the last thihng is to combin of the both, i try do do it like this way (below) and i get 2 diifrent mail , Now i now that i g
-
Where do Software Updates reside until they're installed?
A while back I enabled Software Update to "automatically download important software updates". So now the updates are of course downloaded and waiting for my OK to install them. I suspect though that many updates which I don't need or want are downlo