F110 -In table T074U, the entry K   is missing

Hi All,
I am trying to process an item with Sp.GL indicator through payment run F110. I am geting following error message in the proposal log
"In table T074U, the entry K   is missing". This table gives me all the Sp. GL indicators with the relevant config value. And for the related Sp. GL indicator I have checked that entry K is defined in the table T074U for the relevant Sp. GL indicator.
In the Payment run config (FBZP) - All company codes. the relevant indicator is entered in the field "Special GL indicator to be paid". And I have checked that the relevant alternative recon account for this special indicator is defined correctly and the special indicator is not marked as noted item as well. So, I have no clue
Please let me know what is the solution.
Thanks
Ron

Hi
Configuration for the Sp Gl indicator is correct. And i am able to find out the reason for discussed error. Actually, a substitution was deleting the Sp. Gl indicator from the line item after the posting. So, when F110 was trying to do the payment it sees an item with Sp. GL posting key but was not able to find the Sp. GL indicator which got deleted before by the substituion. So, there was not a way to find the alternative recon account for posting for the payment run.
Thanks
Ranjit

Similar Messages

  • Error while creating cust In table T078D, the entry VD01 is missing...

    Hi Gurus,
    I am new to SAP and have just installed SAP 4.7 on my laptop. While creating customer master, a message displays In table T078D, the entry VD01   is missing, and even for XD01 the same message is displayed. Can you guysplease help me with this?
    Thanks
    Shiva

    Hi,
    this looks like some customizing records are missing in your installation.
    Table T078D contains the transaction dependant field settings.
    This is in relation with customizing transaction OB20
    In that table, there should be at least 15 records with the corresponding table key
    FD01
    FD02
    FD03
    VD01
    VD02
    VD03
    WR01
    WR02
    WR03
    WR11
    WR12
    WR13
    XD01
    XD02
    XD03
    So, if you don't find why standard customizing records are not part of you installation, you may re-create such records with the above keys.
    Please note that all fields that are not part of the key should at least contains '.' character for each digits of each fields.
    eg: FAUSA is 40 digits long.
    FAUSA = '........................................'
    Hope this helps
    Regards
    Alain

  • In table T159L the entry 1111 is missing

    HI All,
    When I tried to do Production Receipt with MB1C, I have got the below error.
    in table T159L the entry 1111 is missing. (1111 is my plant)
    Pls advice.
    Niranjan

    Hi Niranjan,
    Please check in SPRO>Materials Management>Inventory Management and Physical Inventory>Plant Parameters.
    I don't think that the Plant creation is missing in OX10, because message clearly says Plant 1111 does not exist in Table.. so it is clear that Plant is existing in OX10.
    Regards,
    SAPFICO
    Edited by: SAPFICO on Mar 24, 2011 9:21 AM

  • In table T030R the entry #### SKE is missing

    Does anybody know how to configure the automatic account determination rules to populate this table for this specific transaction (SKE)?  I am seeing this as an error message and am trying to further understand the background on the root cause of this error message.

    Hi,
    Go to FBKP, choose 'Automatic postings' and maintain accounts determination for 'Cash discount and payment differences'.
    Regards,
    Eli

  • Error: "The entry 1111 is missing in table T043S"

    Hello All,
    While clearing a G\L account the below error was encountered:
    "The entry 1111 is missing in table T043S"
    1111 is company code,
    However when I look at the table T043S, 1111 is there.
    Could help me to figure out what might be the other cause of this error?
    Thanks in advance!
    Jhero

    Hello,
    In T043S and T043G (OBA3) you need to create two tolerance limits.
    one tolerance limit with some name
    second tolerance limit without any name (blank)
    If you do not create tolerance limit blank then your tolerance is not going to work.
    First create tolerance group blank for your company code, then copy that tolerance and give some name for your company code.
    Hope it should solve your issue.
    Regards,
    Ravi

  • The entry AGX   is missing in table T030B

    Hi all,
    When i create new record in FB70, with SGL Ind Z, there is an error: The entry AGX   is missing in table T030B.
    How to fix this issue?
    Thanks,
    Quang,

    Hi,
    Please maintain values for AGX at  transaction code OBXW. You need to maintain posting key for Customer item with special G/L indicator at AGX.
    Path for transaction at SPRO:-
    Financial Accounting ---> Accounts Receivable and Accounts Payable ---> Business Transactions  ---> Outgoing Invoices/Credit Memos ---> Outgoing Invoices/Credit Memos - Enjoy ---> Define Posting Key for Outgoing Invoices/Credit Memos
    Regards,
    Anand Raichura
    Edited by: Anand Raichura on May 14, 2010 11:55 AM

  • In table TVTA, the entry SE44 02  is missing

    Hi all,
    When am trying to create a customer master record with ref to another customer master record am getting the message "In table TVTA, the entry SE44 02  is missing" and cld not able to extend the same customer master reocord to another sales area with different company code.
    I want to create a customer master record in ref to the customer master record of sales area SE44/02/01 and company code SE01 to a new customer master reocord with sales area FI44/02/01 and company code FI01. But due to the above message am failing to do so.
    what should i do in this case?
    awaiting ur responses.
    thanks in advance.
    Cheers,
    Anil.

    Hello Aniku,
    I think that I have reproduced your issue, and I get the message Nº F2644, please confirmed if your issue is this one. I have created the customer master record in the transaction XD01, and I have written the fields: the customer number (KUNNR); the sales organization (in your case: SE44); distribution channel (in your case: 02); and as reference: the customer number again; the sales organization (in your case: FI44); distribution channel (in your case: 02).
    If this one is your issue, the problem is that you have forgotten to write the Division Number in the sales area you want to create, and also in the reference division.
    Maybe your issue is the message Nº 2100. In this case, I have written the fields: the customer number (KUNNR); the sales organization (in your case: SE44); distribution channel (in your case: 02); division (in your case: 01); and as reference: the customer number again; the sales organization (in your case: FI44); distribution channel (in your case: 02).
    If this one is your issue, the problem is that you have forgotten to write the reference Division Number.
    I hope this solution helps you, if this explanation does not solve you issue please write step by step what you did.
    Regards,
    Johnattan Company
    SAP SD Consultant

  • In table T019, the entry  S  0   is missing

    I use FB50. When I want to park document, it gives error as "In table T019, the entry  S  0   is missing"
    How can I solve this problem?
    Wbr.
    İlker Çokkeçeci
    Computer Engineer
    Ankara,Turkey

    Dear Ilker,
    please check if You have all the following entries into Your T019 Table:
    A     S                300
    B     S                300
    D     S                300
    E     S                300
    V     S                300
    Z     S                300
    if not please do it by sm31.
    I hope this helps.
    Mauri

  • Which field ,table gets the entry when we refresh cube statistics

    Hey,
    I just want to know  into which field or table entry is made when we Refresh statistics using the manage tab of the Infocube.. I saw the fields of the table RSDCUBE , there are two includes as given below and their fields, Im noy able to quite figure out which field gets the entry when i click on refresh statistics button in the Performance tab.
    1) RSDCUBEDBFLAGS (InfoCube: DB Performance Flags): which has the following fields namely
    CLEAR_INDEX     Boolean
    DELTA_INDEX     Boolean
    REBUILD_STAT     Boolean
    DELTA_STAT     Boolean
    PERCENTAGE     internal use
    NULLCOMP     Zero elimination in the summarization module
    COMP_DISJ     Flag: only disjunct records
    REFUPDATE     No update of the non-cumulative marker
    2)RSDCUBEBWSTAT (InfoCube: BW Statistics)
    BWSTATISTICS     Boolean
    BWSTATWHM     Boolean
    However , when i click on refresh statics, there is a job which runs from my id which triggers the program RSDSTAT1 with variant as the cube name..
    its kinda urgent...  helllpp
    Thanks,
    vaish

    Hey,
    I just want to know  into which field or table entry is made when we Refresh statistics using the manage tab of the Infocube.. I saw the fields of the table RSDCUBE , there are two includes as given below and their fields, Im noy able to quite figure out which field gets the entry when i click on refresh statistics button in the Performance tab.
    1) RSDCUBEDBFLAGS (InfoCube: DB Performance Flags): which has the following fields namely
    CLEAR_INDEX     Boolean
    DELTA_INDEX     Boolean
    REBUILD_STAT     Boolean
    DELTA_STAT     Boolean
    PERCENTAGE     internal use
    NULLCOMP     Zero elimination in the summarization module
    COMP_DISJ     Flag: only disjunct records
    REFUPDATE     No update of the non-cumulative marker
    2)RSDCUBEBWSTAT (InfoCube: BW Statistics)
    BWSTATISTICS     Boolean
    BWSTATWHM     Boolean
    However , when i click on refresh statics, there is a job which runs from my id which triggers the program RSDSTAT1 with variant as the cube name..
    its kinda urgent...  helllpp
    Thanks,
    vaish

  • In the table AIINSTALLATIONS the customer numer is missed

    Hi!
    I've got a small question: in the table AIINSTALLATIONS the field installation number is tilled out but the customer numer field is empty.
    Can you suggest me where I'm able to fix it?
    Thanks in advance

    SMSY_SETUP
    Write Data Back into SLD                          *
    Default CPU Load AC                                     85
    Multiple SLD Servers                          <empty field>                                                                           
    Hide Progress Display                     <empty field>                              
    SLD Host                                             <server name>
    Namespace in SLD                               sld/active
    SLD Server Port                                          50200
    SLD User                                               j2ee_admin
    AC CPU Load Warning Value                     65
    Generate Business Partners from OSS     C
    Generate Systems from OSS                     A
    JOB LOG
    Job started
    Step 001 started (program AI_SC_REFRESH_READ_ONLY_DATA, variant , user ID USERSAP)
    No destination for SAP customer number 733135
    No destination for SAP customer number 755727
    Identification Category SP0001 is Not Assigned to Any Identification Type
    Identification Category SP0001 is Not Assigned to Any Identification Type
    Business Partner 35 was created for customer 737370 with messages
    No destination for SAP customer number 1025117
    No installations flagged for system generation for customer 733135
    No installations flagged for system generation for customer 755727
    No installations flagged for system generation for customer 1025117
    System headers will be generated in SMSY from SAP Support Portal
    No new systems found in SAP Support Portal to generate in SMSY
    The following error messages have been returned by SAP Support Portal:
    User S0003352577 - "Maintain System Data" authorization not found for installation number 0020292124
    User S0003352577 - "Maintain System Data" authorization not found for installation number 0020298240
    User S0003352577 - "Maintain System Data" authorization not found for installation number 0020298240
    User S0003352577 - "Maintain System Data" authorization not found for installation number 0020298240
    User S0003352577 - "Maintain System Data" authorization not found for installation number 0020298241
    User S0003352577 - "Maintain System Data" authorization not found for installation number 0020298241
    User S0003352577 - "Maintain System Data" authorization not found for installation number 0020298242
    Installation number 000INITIAL not found
    The following error messages have been returned by SAP Support Portal:
    No system ZZ1 found for installation number 0020277953
    No system CN3 found for installation number 0020277955
    License data collected (customer number: 0000737370)
    Job finished

  • The entry 1810   is missing in table T043S

    hi ,
       i am gettign the above eror in f-03 . clear g/l accounts, kindly help.
    aslo waht is the diff between f-03 adn f.13 ( automatic clearing ), the compnay code is 1810
    please let me know

    Hi
    Maintain  -  Tolerances for Groups of G/L Accounts
    SPRO>FA>GLActg>Busi.tran>Open item cle>clearing dif>Tolerances for Groups of G/L Accounts
    1810  100 100 99 99
    VVR

  • Does deletion of a document also deletes the entries in audit tables?

    Hi,
    Can anyone tell me that if a document is deleted from UCM (say it's archived and then deleted) will this also remove all the audit trails and entries in other tables(docmeta,revisions,workflowhistory.. etc) as well?
    Also if there are custom tables , will the entries be deleted automatically? How does this work?
    I have to generate reports for the documents that are not archived.
    Regards,
    saumya

    Hi,
    Tables like Workflow History need to persist these content items as its purpose is totally different. If a admin wants to know how many content went through a particular workflow, this is the table he could refer to and also know who approved them. It is up to you to truncate records in these tables depending upon the organization need. You can for example truncate records older than 5 years from these tables.
    Regards,
    - Anand

  • F-32 the entry is missing in table

    Hi ,
    When we are performing the transaction F-32, we are getting the below error message
    " The entry YYY is missing in table T043G ".
    However, I could find the tolerance groups attached to this company code YYY in OBA3.
    I have serached the forum and it says to create another entry for company code YYY in T043G and leave the Tolerance group as blank to resolve this issue..
    But if i assign the Tolerance group as Blank to this company code, then would the tolerance check be completely removed for this company code ?
    How does this work...Any idea on the after affects of this change...
    Thanks,
    Srikanth.

    Hi,
    Through a blank tolerance group, we specify the lowest level of payment differences and cash discount allowed for Customer.
    this will be applicable for all customers in co. code. For any other set of customer whom we can have less control, we can create a new tol. group with desc and assign the same in master.
    Regards,
    Gangadhar

  • The entry T017 is misssing in Table T052,Message No.F5100

    Hi Experts,
    While   Posting Entry  useing T-code-F-02 i'm getting below error
    The entry T017 is missing in Table T052 and message No . F5100.
    What could be the reason?
    Kindly give valuable input.
    Shriram.

    Hi,
    Once in production whether that payment termis available or not if it is there ,
    Then change message control to warning & proceed.spro-- cross component application --Bankdirectory  there you can change
    regards,
    Santosh kumar
    Edited by: santosh kumar on Oct 22, 2009 1:25 PM

  • FB70_The entry 001 is missing in table TAB_FSKB

    Hi,
        I create a company code, when I use FB70, enter company code&#12289;customer number&#12289;invoice and posting date, then click enter, a warning message will jump:
    The entry 001   is missing in table TAB_FSKB
    Message no. F5100
        If I change the company code to other one,everything is ok. So I think maybe something is wrong with the data related to company code.

    HI
    Plz go to OBY6 and check whether your company code is there are not. I dont think it is there. Even if it is there, see whether you have assigned the Chart of a/cs, fiscal year, document types, document no. ranges, field status grp.etc.
    Plz assign points, if its helpful.
    Regards
    Rajaram

Maybe you are looking for

  • How to create a report based on radia selection

    Hi, I am new bie to Appex, I have a requiment to generate a report based on existing table with the select creditaria. I mean, the select creditaria wil be the radio button, if i click any option the report will change accordingly. It is nothing but

  • Error in format

    In resin this program work just fine, one exception. In dos it prints out, "Error in format". I then tried to run it in tomcat, tomcat then printed out a error. "java.lang.IllegalStateException: getWriter() has already been called for this response"

  • Flash file insert not showing up in Safari

    Hi. I've got a simple artist's website that was created in Dreamweaver 8 with Flash MX file inserts for the images. I downloaded the new Safari for Windows browser yesterday to test it, and I'm getting the little blue box in place of the Flash files

  • Send to: Changing default texts/system-url for emails

    Hi, I would like to change the default texts for emails send by "Send to". The specific problem is, that the system-url in the link to the object isn't correct. for example: http://testsystem... instead of http://productive... Have you got any ideas

  • Alert profile specific to a plannign book?

    Hi,         When I go to alert monitor, in alert profile, I have to specify a planning book and select the alert types. I then have to go to interactive planning and assign a alert profile. If I go to another book, and check the profile assigned, it