F110 _ Payment document not created

Hi
In the payment run in f110 the system shows the following error  - Payment document not created . the amount is shown in the proposal list. while payment run has been carried out for the particular vendorsystem shows the error. for other vendors it shows coirrectly. please advice why this error comes.
With regards
Balaji

Hi,
First check certain customization:-
(1) FBZP setup for payment method at country level. Whether IDOC generation program is assigned or not.
(2) Then check the variant of RFFOEDI1 in the printout tab of F110. Is the selection creteria OK?
(3) Check the partner profile in WE20 for the bank.
Then run the program RFFOEDI1 in SE38 for your payment run and check the output.
You can also get this program debugged from you ABAPer to have root cause analysis.
Regards,
Gaurav

Similar Messages

  • Payment advice note created-F110

    Hi All,
    I ran F110 prograqm for ACH payment, I see everything is good and I able to create the ACH file.In SP01 when I try to find payment advice, I have only payment summary, accompanying sheet and error log,In Error log it says  payment advice note created for the document.But I am not able to see the  payment advice.It was working fine earlier.My print variant is for duely selected in F110 print tab.What could be the reason, I dont find the payment advice anywhere?Any help.
    Regards
    Shaun

    Hi
    In Variant under Print Control if you select Print Payment Advice Notes CheckBox and Print Immediately CheckBox then only payment advices will be generated and you can see in the Spool
    Regards
    Venkat

  • Acctg document not created for cancellation invoice

    Hi all,
    We have a vehicle sales order created with payment card. The SO contains one item for vehicle and one item for parts. The items were delivered and invoiced separately. Hence, SO has one vehicle sales invoice (VSI) and one parts sales invoice (PSI).
    The standard procedure was to post VSI first before the PSI. Accounting documents have been created when both invoices were posted. However, there was a need to cancel the PSI. When this was done, cancellation invoice was created but there was no accounting document posted for the cancellation.
    I tried simulating the scenario in our test server and cancelled VSI 90000081 first before cancelling PSI 90000082 to test if this can be an alternative solution. Cancellation for VSI was posted successfully but error persists for PSI cancellation.
    Order 67 06/19/06 Completed
    . Delivery 80000081 06/19/06 Being processed
    .. Picking request 20060619 06/19/06 Completed
    .. GD goods issue:delvy 4900000293 06/19/06 complete
    .. Invoice 90000081 06/19/06 Completed
    ... Accounting document 2000077 06/19/06 partly cleared
    .. Invoice cancellation 90000084 06/19/06 Completed
    ... Accounting document 2000079 06/19/06 partly cleared
    . Delivery 80000082 06/19/06 Completed
    .. Picking request 20060619 06/19/06 Completed
    .. GD goods issue:delvy 4900000294 06/19/06 complete
    .. Invoice 90000082 06/19/06 Completed
    ... Accounting document 2000078 06/19/06 Not cleared
    .. Invoice cancellation 90000083 06/19/06
    .. Invoice 90000085 06/20/06 Blocked
    Accounting status of 90000083 (where error occurs) in VF03->Header->Details is set to K or <b>Accounting document not created (authorization lacking)</b>.
    Any inputs? Thanks in advance.

    Hello Sheila,
    sorry - my first answer was in mistake - Status K means:
    "The transaction is processed using payment cards. The order, however, does not contain valid authorization.
    This problem occurs in billing documents for follow-up deliveries."
    Could you check this ? Last way would be to set a breakpoint into the FM 'RV_ACCOUNTING_DOCUMENT_CREATE'
    and trigger this via VF02 -> Release to accounting.
    Regards Wolfgang

  • FCN Document not created for SO : Message SY499-Urgent

    While Saving delivery or doing PGI or while processing billing document i am getting below info message.
    "FCN Document not created for SO " Message SY499.
    I dont know why this message started coming now. I have added my country in VI49 settings. I wonder that due to that this message is coming.
    I dont want this message to come whiel delevery processing. Pl. let me know how can this be possible.
    Regards,
    Vijay

    Hello Sheila,
    sorry - my first answer was in mistake - Status K means:
    "The transaction is processed using payment cards. The order, however, does not contain valid authorization.
    This problem occurs in billing documents for follow-up deliveries."
    Could you check this ? Last way would be to set a breakpoint into the FM 'RV_ACCOUNTING_DOCUMENT_CREATE'
    and trigger this via VF02 -> Release to accounting.
    Regards Wolfgang

  • FI - Accounting Document not Created

    Hi Forum,
    At the time of Billing Invoice creation (VF01), system giving an error in the Header "Posting document not created (export data missing)" & Foreign Trade data is INCOMPLETE.
    for this reason, i am unable to post the accounting Document.
    Can anyone help me on this issue.
    Thanks In Advance.
    Kishore

    Dear Kishore,
    Check the customer master and what country you are sending the goods for.
    If the customer is a Export customer, you need to fill in the Export data in the material master and configure the foreign data in customizing.
    Thanks
    Augustine Ponraj.

  • Received payment documents (not cleared yet) in dunning selection

    Dear experts,
    Do you know if it is possible to have received payment documents (not yet cleared against open items) in the dunning selection, dunning list and dunning letter?
    Is there a BADI or BAPI we can use to change the document selection of the dunning program?
    Hope to hear from you soon.
    Best regards,
    Jurriaan

    Hi,
    As a standard, whenever you are receiving collections without refering to any invoice, both the items (means customer invoice and receipts) will appear in the dunning notice... !!!
    If the collection received by using SPL GL indicator, then you have to activate the particular SPL GL indicator in T Code FBMP and SP. GL indicator tab
    Hope it clears your doubt.
    Regards
    A.Saravanan.

  • Accounting document not created at the time of capture and post excise duty

    Hi
    Accounting document not created at the time of capture and post excise duty
    Please explain what the reason
    Regards,
    Channa

    reloved myself

  • Bposting document not created(acccount determination error)

    Dear All
    when i am creating invoice in vf01, the system is unable to create accounting document
    i have checked acc assignment of customer and material its their, but still its giveing erro
    error in acc determination
    this is the message iam geting 
    Bposting document not created(acccount determination error)
    how to resolve this issue
    Thanks
    jahangir

    Hi Jahangir,
    Go to VF02 --> Enter --> In change overview screen --> Click at "Enviroment" (Menu) --> Click at "Acc. Determination Analysis" --> Click at "Revenue Accounts"
    You can see the condition types there ---> Open the tree one by one --> see the details on right side --> check for which combination the G/L account is missing
    Maintain the entry in VKOA.
    After that come back to VF02 and release the document.
    If the error still there then check the analysis, whether the required record determined or not.
    Hope this helps.
    Regards,
    MT

  • Posting document not created (Pricing Error)

    Hello Everybody,
    I have a problem with a invoice. If i go to VF03, I can see a positing status as F Posting document not created (pricing error). The error message is showing as pricing error in item 000010 Message No. VF 073. Kindly help me how to unblock this invoice.
    Your help much appreciated.
    Regards,
    Ravi

    Hi,
    I think problem is in VKOA settings. Please go to VF03. Press Shift + F11. System will lead to Revenue Account Determination analysis. Please check the settings.
    Regards,
    Jigar

  • Posting Document not created (export data missing)

    We are working on ECC 6.0 and during creation of Cancellation Billing document type IVS for the Intercompany billing, the document did not create Accounting document giving the Posting status as G - Posting document not created (export data missing). However checked the Foreign trade data and the system states that Foreign trade is complete.
    Can any one suggest the solution for this?
    Thanks.

    Hello Mohammad,
    About this issue, the incompletion of this cancellation document
    arises might because the reference delivery has been archived/deleted.
    This is likely due to your current copy control settings (VTFL).
    If you have set ' ', in the export determination field this means that
    there is a common 'exnum' key between the delivery and billing documents
    LIKP-EXNUM & VBRK-EXNUM are the same.
    The result of deleting the delivery is that you also delete the FT data
    for the delivery, Because the billing document and delivery share the
    same foreign trade table entries, you have in effect deleted the FT data
    of the billing document too. This would most likely go unnoticed but if
    you then cancel the invoice the system has no FT to copy into the new
    cancellation billing document, which leads to this issue.
    Firstly you should set the export determination flag in the copy control
    of the delivery & billing documents. This will avoid this issue in the
    future. Set it to to 'A' or 'B' depending on your requirements.
    For the incomplete cancellation billing document, you could use userexit to
    set it as complete:
    You can use transaction CMOD.
    Create a project for example FT project button create short text: ....
    drop button Enhancement assignment & save use for example local object.
    Use the F4-help for Enhancement and look for V50EPROP.
    Drop button Components:
    here you will find EXIT_SAPLV50E_005 and EXIT_SAPLV50E_006
    In the userexits doubleclick on the includes ZXV50U05 and ZXV50U06
    The coding in the userexits should be: C_COMPLETE = 'X'.
    Afterwards activate generate ... and save.
    The development class is VEI.
    Please also check note 118573 which explains the FT user exits.
    Regards,
    Alex

  • Account document not created Message no. VF062 for the pricing procedure

    When I tried to create an invoice I came across this problem of Account document not created Message no. VF062.
    I created a pricing procedure with base price,BED,EDU CESS,HIGH EDU CESS ,VAT,CST.
    Condtion record was set for each pricing condtion type.
    Sale order>delivery->invoice
    When invoice was stored i get the message accounting document not created.
    After that i changed the condtion class of (BED,EDU CESS,HIGH EDU CESS ,VAT,CST.) from D-tax to B-price.Now the invoice is stored without the messag(accounting document not created).What will be the problem associated with this

    i changed the condtion class of (BED,EDU CESS,HIGH
           EDU CESS ,VAT,CST.) from D-tax to B-price
    Whaterver condition types you have with condition class as D, I am sure, you should have assigned some Account Keys in your Pricing Procedure.  Ensure that those Account Keys are appearing in OB40 as otherwise, you will face this issue.
    G. Lakshmipathi

  • I have pages 09 0n my Mac Mini, but iCloud won't accept pdf documents not created in pages...

    I have pages 09 0n my Mac Mini, but iCloud won't accept some pdf documents not created in Pages (Its says Document format not supported).
    How do I get docs (pdf/jpg etc.), that are saved under "Documents" on my Mac Mini (Not in Pages), onto iCloud???
    I want to transfer (None Pages) documents from the Mac Mini to my iPad 3 (Which has Pages for iPad 3).
    Thanks in advance for ANY Feedback!

    You can download PDF files from iWork's page to a mac, but you can't upload from mac.  Also, you can't use iCloud like MobileMe's iDisk.  Most document formats on your mini can't be copied to iCloud.  Use Dropboc instead.

  • F110 - One payment document for numerous vendors

    Hi,
    I know it is possible to create in F110 one document for all payments for one vendor.
    Recently I was askedy by Finance to allow to create in F110 one document that combines payments all vendors open items that have the same payment method. I have never had such requirement before.
    Is it possible and if yes how can I set it up?
    Many thanks,
    Karol

    Hi,
    The requirement is not feasible practically, as if you create only one payment document for all vendors with same payment method, how will you pass on the payment data to bank for making payment to different vendors. (as each vendor would be having different bank details.)
    In case you do not want to pass on the payment data to bank, and just want to make posting in FI for payment, then you can link all the vendors to a head office vendor (Head Office - Branch Concept) and can then make a single payment document for all the vendors linked to the main vendor.
    Regards,
    Gaurav

  • Cheque printed but  fi document not created (line  item shows as open item)

    Hi,
    Problem Description :
    F110
    In  payment run Posting order is not matching it shows 11 generated and 10 completed .
    Due to this, document number 5100316279( i.e open item)  was not cleared but generated a cheque 809635 for 58.75
    The same document number  5100316279got cleared on  01.07.2008 ; payment run  and generated another cheque 809643 for same amount 58.75
    To summarize due to a system error we ended in a double payment to the  vendor.
    Request you  help us to solve  this issue.
    Thanks.

    Hi,
    The reason why you have more documents generated than completed is that update terminations on the executing the payment run.It means some documents were not posted in the data base. You could find the terminated update via using SM13.
    Here is some information saying what you have to do when this happens:
    You need to analyse the update record data to decide what has to be done with the update records. In order to analyse the record data, use transaction SM13 for terminated updates. By double-clicking on the terminated update records, the updates modules are displayed. By double-clicking on the function module 'POST_DOCUMENT' with error status you can see in whick line item the clearing has failed. Please use
    'Goto => Display data'. In table T_BKPF and T_BSEG are the data of the entered document. Important are CPU-Date (T_BKPF-CPUDT) and Time (T_BKPF-CPUTM). In table T_AUSZ1 is the the information which line item
    (BELNR, BUKRS, GJAHR, BUZEI) should be cleared with this update record.
    Afterwards, execute FB03 for this document and determine the clearing document BSEG-AUGBL for this line item. Analysing this clearing document with data of the terminated update records you have to decide what has to be done with this update record.
    For repeating the update task it is necessary that the clearing of the Open item is reset with transaction FBRA. Without resetting the other Clearing you will always get error F1 805 in the function module 'POST_DOCUMENT'.
    So can you please analyse the data concerning the update termination. Depending on the investigation, you have to decide, whether the data has to be re-entered or whether the update task can be deleted or whether the clearing has to be reset and the task has to be repeated.
    With regards,
    V.Krishnamoorthy

  • Lockbox: Partial payment is not creating when processing Lockbox file

    Hello experts,
    I am processing the Lockbox EDI 823 file but it is not creating the partial payment instead of that it is creating the Residual. I already check my config OBAY and I have "Partial Payment" checked.
    MY business really doesnu2019t want to have original invoice cleared and create the new one in case of over/under payment outside the tolerance limit. Please let me know how I can resolve this issue.
    Thanks
    Farooq

    Hi Hema,
    Is the SAP document is from the same company code, where the lockbox is configured or it is a different company code?
    If you have an user exit and if all the company codes having same document numbering, then the lockbox program may not able to pick up the correct invoice number, if you have the same invoice number in more than one company code. To my understanding, the lockbox program first tries to identify the customer based on MICR number and then see all the open invoice in that customer and if it finds a match it will apply or else it will post on account on that customer otherwise it will not process it.
    So, can you please check whether
    1. You have a valid MICR number in the customer master and if the same MICR number is available in the lockbox,  then the lockbox will identify customer and apply based on the invoice details available.
    2. If it is a new MICR number, then Lockbox program, should identify the customer through a SAP document, if there is a user exit, it will see whether that document is OPEN in any of the company codes and identifies the customer based on that.
    If any of these conflicts, then it may not able to process that check.
    Regards,
    Vijay

Maybe you are looking for

  • When I add contacts from text messages they don't show up in my Contacts list.

    Right, I hope I didn't miss another thread. Nothing appears in my contacts list when I try to save numbers from text messages. The only way to save a contact is to type it manually. But the "save to contacts" option is there, so where is it actually

  • How to create event on iPhone and have it sync with Google and Exchange?

    How can you synchronize your Exchange calendar with your Google calendar? I have an Exchange account and Google Sync set up on my iPhone 4. However, when I create an event on my iPhone, I have to pick which calendar it goes in, and it shows up only i

  • Restrict disk access on Time Capsule

    I have a 2TB Time Capsule with 2 external drives connected to it through a usb hub. Now I want to restrict access to one of those external drives. Meaning I want one user on the network to have access to to the TC drive and all other external drives,

  • Recent backups fail: "An error occurred while copying files to the volume."

    I recently moved to a new place and set up Time Capsule as a bridge. Backups were working fine for the first couple days but then, out of the blue, I got a message that said the password I entered for Time Capsule was incorrect. I entered the correct

  • Dual monitor Apple TV

    Hello I have just purchased Apple Tv 3rd gen. And I have a mid 2011 15'' MBP that supports Airplay. I was now wondering if it was possible to run e.g. my MBP Desktop as Desktop1 and the Apple tv as an extended desktop, lets call it desktop 2 so that