F4 help on fields in the table

Hi guyz,
I have created table with 4 fields
1.client
2.language
3.name
4.text
now I want f4 button next to all the fields , if I click on client all  client numbers should display and if I click language all possible languages should display , same for all other fields.
I have done using search help but that bringing all the entries in table.
Plz advise.
regards

Hi,
If you use a standard data element for the table field a search help will automatiocally be assigned to it, to check whether a search help is already assigned to a element you can click on the Entry help/check tab of the table. if you find this statement -  Input help implemented with check table, there it means it already has a search help.
If you creating data elements of your own then you need to create a search help in SE11and assign it manually to the field which you want to have an F4 help.
To know how to create a search help visit the below link:
[Creating Search helps|http://sap-img.com/abap/elementary-collective-search-help.htm]
Regards,
Amit

Similar Messages

  • Need help in Populating a Z-field in the table "MARD"

    Hi Group,
    I have a requirement like as under:
    1)
    Need to add a field in the transaction MM01/02/03 screen in the view u2018Plant data / stor. 1u2019. And this field should go into the table u2018MARDu2019 table, by appending the structure and adding this field details in it.
    2)
    Once I post a value into this field thru the transactions (MM01/MM02/MM03) , I need the value in the screen to be populated into the table u2018MARDu2019 in the Appended Structure field.
    Could you please help me out by getting a proper User Exit or BADI which fulfills the requirement?
    in Summary, please let me know a User Exit or BADI which will update the Z-field of the table 'MARD'.
    Thanks for the help in advance.
    Regards,
    Vishnu.

    please  check , it might help you.
    How to add fields to MM01 Transaction
    How to add a new field in MM01 with CONCEPT as a field?
    How to add a new field in MM01, with say contaminent  as a field?
    HI ALL, How can i add new field in mm01 basicdata1 screen
    Add button in MM01 Transaction
    i want to add the one field in mm01 application how can i add the field?
    If you dont get the answer still , please search the forum you will get many links for your requirement
    Regards
    Satish Boguda

  • Search Help on Table Control - Fill more than one field in the table?

    Hey everyone,
    I have built a screen with a Table Control on it... the fields of the table control are linked to an internal table...  The internal table has the line type of a structure I've defined in the data dictionary.  Within that structure in the data dictionary, I've linked some fields to search helps (For example, a MATNR and CUSTOMER search help)...  I've defined in the structure definition which fields from the search help are to be returned to which fields in the structure.
    The problem is, even though I have the search help set to export both the customer number and location when using the search help on the customer field, it still does not fill the location field within the table.  Is this a limitation of using search helps within table controls?
    I'm also finding that by defining the search help through the structure, instead of directly within the screen, the search help round button does not show up on the field, yet I can still press F4 to bring up the search help.  Is there a reason why it's not showing the search help clickable button even though it works fine using F4?
    For doing search helps in Table Controls, is it better to just build the search help, attach it directly to the field in the table, and then after the user picks the single field, use the PAI to run a select and fill the rest of the fields required?
    Thanks,
    Dallas

    Hi Dallas,
    (1)
    What  i understood is that you added a search help by defining it in the internal table type for a field customer number..in the search help you have 2 fields customer number and location...user press the search help ..then you need to fill 2 different fields or 1 field?
    if you need to fill the customer location or location (only one) then you need to set the "import" in the search help for whichever is required.....
    if you need to fill 2 or more different fields..then you can use the technique you have mentioned last , to do a select in PAI and fill the fields....but this you can use if the combination for the fields is unique...eg: u have customer number and location..if customer X can be mapped to location X and location Y..when a select statement is done there are 2 options..so in such cases it is better to leave the option to the user otherwise if there is a clear mapping like customer X can be mapped only to location X then you can use the select..
    (2)
    usually when you define it as a type in the internal table the icon doesn't show up..but you can do alternative like mentioned..go to the table,find the search help for the required field if present or create a new one if required and place the search help mentioned in the screen itself..so as to see the icon...sometimes users are adamant that they need the search help icon to be seen..so it depends on if your user
    (3)
    as in the example of customer number and location mentioned we can provide them different search helps and do the needful processing in PAI to fill the fields
    Table controls may be used for different purposes and requirements....even a checkbox,push button can be placed as a field in table control and used,but yes most of the time requirements are like what is mentioned in your case...
    Regards
    Byju

  • Please help me to find the table for fields where the descriptions are give

    please help me to find the table for fields where the descriptions are given below
    Customer Support Administrator
    first line Support indicator

    You could also try table DD01T. In se 16,put in the description thats needed,you will get to know the respective data elements.
    Then you can use DD03L to find the respective table. This would work if the data element is not generic.
    Regards,
    Anubhav.

  • Problem with displaying Date field in the table.

    Hi All,
    I am trying to display data into a table UI Element. 
    In that data, i have one DATE type field. While displaying data in DATE field, it will display like this "01.02.2009".
    Now my requirement is if i want to modify that DATE field, it will allow to modify "01.02.2009"  to "26.02.2009".
    But while modifying DATE field , I want to show the Calender of that month, in that i  have to select the another date.
    (Like normal Date UI Element will show that calender).
    Can anyone please help me.
    Thanks in Advance!
    Regards,
    Sreelakshmi.

    Hi,
          Go to the context attribute that was mapped to the DATE field of the table and change the perperty INPUT HELP MODE to  AUTOMATIC and it works.
    Regards,
    Manne.

  • How to attach search help in field BEDNR in table EKPO

    Hello, Experts!!!
    I have a problem in attaching Search Help in field BEDNR in table EKPO.
    Can anyone share something about this.. I've been dwelling on this for some time now,
    but still wasn't able to find a solution.
    Any thoughts would be highly appreciated.
    Thank you!!!
    Ellainne22

    Hi,
    I don't think you can directly link any search help with BEDNR without modification. If a search help was already linked, we could have gone for append search help. But in this case, nothing is there. So the options would be,
    see whether you can insert any search help through enhancements in the screens..You have to do it in every screen then.
    Other option is create a database view, & replace the dataelement with your own with a search help. You can refer this view after that.
    or go for modification & change the dataelement.
    Regards,
    Gokul

  • Add a custom-field in the table MARC and manage it in MM01/MM02/MM03

    Good day to all of you!
    I have this task: To add a custom-field to the table MARC. This custom-field will be managed through the MM01/MM02/MM03 transaction as follows:
    In the Basic Data 1 or Basic Data 2 the custom-field data will be added. Let's say the field is MATNR OBSOLETE.
    I have searched and implemented the things in customizing: Made a copy of function group MGD1, added the field on the screen.
    MY PROBLEM! How to manage it??? When the user enters MM01/MM02/MM03 and update this field, the field should be updated in MARC.
    1. I am not sure that this custom-field should be on Basic Data1 or Basic Data2.They want it at plant level.
    2. How to manage the data transfer from SAP Standard Program and my Custom Function Group.
    PLs: Do not paste me link to sap technical site with that example, because there takes the custom fields and UPDATE a CUSTOM TABLE. I need to update MARC!
    All the documentations i have read until now tell you how to add the field, ONLY the first part of the SOLUTION.
    Any help, pls?
    Good day and thank you!

    Hi Alex,
    In which way you are trying to update that custom filed. Have you written any logic in EXITS/BADIS?
    http://pavelgk.pbworks.com/f/6729224-Implement-Screen-Exit-for-MM01-Adding-New-Fields-in-Screen.pdf
    and
    Just read the OSS note mentioned earlier.
    Symptom
    You want to integrate customer-specific fields in material master maintenance.
    Other terms
    SAPLMGMM, RMDATIND, ALE, CI_MMH1, EXIT_SAPLMGMU_001 
    Solution
    To add customer-specific fields to an existing material master table (such as MARA or MARC) , you can proceed as follows as of Release 3.0C:
          1. Use an append structure to add the fields to the required table in the Dictionary (this is not a modification; for details, see the SAP document "ABAP/4 Dictionary"). In Release 3.x, the length of the field names must be the same as  the standard five character fields. This is necessary because of dynamic assignments. As of Release 4.0A, the lengths of the field names can be longer than five characters. If the changes of the fields should be recorded in the change document and taken into account during ALE distribution, set the 'Change document-relevant' indicator for the corresponding data elements. For table MARA in Release 3.x, you must also enhance the database view MARU because the database changes are carried out using this view. This small modification is no longer necessary as of Release 4.0A because the database view MARU is enhanced automatically when you enhance table MARA or the include EMARA (which is the data part of table MARA).
          2. Enhancing online maintenance in customized material master maintenance:
          Define a subscreen with your customer-specific fields in a customer-specific function group created as a copy of the standard function group MGD1.
          In Customizing, assign this subscreen to a maintenance screen using the "Copy customized material master" function. For details, see the Implementation Guide (IMG). As of Release 4.0A, program COPYMGD1 is available. You can use this program to create customer-specific function groups as required. This program is also incorporated in the Customizing function 'Configure customized material master'. Ensure that each field of the subscreen has a field statement in the flow logic, otherwise the data is not transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
          If you want these fields to be subject to standard field selection, you must add new entries for them to the central field table for material master maintenance (T130F): 
          Application examples for standard field selection:
          The field is mandatory and is to be flagged with a "?".
          The field belongs exclusively to the purchasing user department. Purchasing data and MRP data are both contained on one screen. However, the MRP controller is not to see the purchasing data.
          The following data is required for each field:
                a) Field name        (T130F-FNAME)
                b) Field selection group (T130F-FGRUP)
                Here, you should use a standard field group if the customer field is subject to the same field selection as the standard fields of the standard field group. If it is not, use a customer-specific field group.
                You must then check and, if necessary, modify the attribute of the field group using the function "Maintain field selection for data screens" in Customizing under "Logistics Basic Data -> Material Master".
                Field groups 111 through 120 that are not used in the standard system are reserved as customer-specific field groups. As of Release 3.0F, additional customer field groups are available. (For details, see the IMG).
                c) Maintenance status (T130F-PSTAT)
                List of the user departments that may maintain the field. You can display possible values by using the input help for the maintenance status field in the Customizing activity "Configure Material Master" when maintaining logical screens.
                d) Reference        (T130F-KZREF)
                This indicator must be set if the field from the reference material should be proposed during creation with reference.
    Note: You cannot yet use Customizing to enhance table T130F; you can use only transaction SE16 (Data Browser) or transaction SM31. Future releases will include a separate Customizing function for maintaining customer-specific fields. See Note 306966. By implementing this note you can add entries to table T130F within Customizing. This type of maintenance is possible as of Release 4.5B.
    You may change the entries for standard fields only with regard to the reference data and field selection group. Changing other data for standard fields constitutes a modification. Therefore, you cannot use the Customizing function "Assign Fields to Field Groups" to change this data.
    In addition, you must not add new standard fields to table T130F.
          3. If you want to maintain customer-specific fields using data transfer by direct input or via ALE distribution, proceed as follows:
          Add the fields to central field table T130F (see above).
          Add the customer-specific fields to the data structures for the data transfer (for example, BMMH1 for the main data).
          Also, add the customer-specific fields to the tables in which the incorrect data is stored during direct input. These tables have the same name as the corresponding master data table and also have the suffix _TMP.
          For example: If you add customer-specific fields to table MARA, you should add the same fields to table MARA_TMP.
          If you use ALE, you must also add fields to the IDoc. To process enhanced IDocs, you can use enhancement MGV00001 with customer exit EXIT_SAPLMV01_002 for creating the IDocs and customer exit EXIT_SAPLMV02_002 for posting the IDocs.
          Prior to Release 3.0E, enhancing structure BMMH1 constitutes a modification. In this case, you must add the new fields tot the end of the structure before the last field (SENDE = record end indicator).
          As of Release 3.0F, structure BMMH1 contains the customer include CI_MMH1, which is part of the enhancement MGA0001. Here, you must proceed as follows:
                a) Add the customer-specific fields to include CI_MMH1.
                The names of the fields in CI_MMH1 must be identical to those of the corresponding fields in material master tables MARA, MARC and so on.
                Important: The fields must be CHAR type fields. Therefore, create CHAR type data elements whose lengths are identical to the output length of your fields in  table MARA and so on. Use these data elements in include CI_MMH1, but use the field names from table MARA and so on.
                b) Activate include CI_MMH1.
                c) If you have not used customer structure ZMMH1 before, create it as a copy of structure BMMH1 and delete the standard fields that you do not require. You are not permitted to delete field STYPE and include CI_MMH1 when doing this. If you have already used structure ZMMH1, add include CI_MMH1 to it.
                d) Activate structure ZMMH1. This also adds the customer-specific fields to ZMMH1.
    Run program RMDATING. This program generates routines which are supplied to your customer-specific fields from the input file. As of Release 4.5A, you also need to activate the routines/function modules generated by program RMDATING (especially, the MAT_MOVE_BMMH1_XXXX modules). Details about this subject (especially the procedure when using customer structure ZMMH1) are described in the IMG for transferring the material data under item 'Maintain Transfer Structure'. Also, check the declaration of structure WA in program RMMMBIMC to see whether it is declared with sufficient length. If necessary, enhance the declaration (for the time being, this still constitutes a minor modification).
    In addition, lengthen domain DI_DATA with CHAR 5000. As of Release 3.1H, this has already been done.
    Important: When using customer-specific fields, you can use only structure ZMMH1 to transfer the data. Otherwise, after the next SAP upgrade which contains new standard fields in structure BMMH1, the input files no longer match. If you want these new standard fields to be transferred, add them after your customer-specific fields (the order of the fields in structure ZMMH1 does not need to be the same as the order of the fields in BMMH1).
    If you want foreign key dependencies or fixed domain values to be checked, or another check for a customer field, this is possible up to and including Release 3.0D only by modifying the corresponding check function modules. As of Release 3.0E, you can use function exit EXIT_SAPLMGMU_001 (SAP enhancement MGA00001) for these purposes.
    If you want to use engineering change management to schedule future changes for your customer-specific fields or you want to use the 'Display at Key Date' function, execute program GENERATE in addition. This program generates the necessary assignments for interpreting the change documents. With regard to engineering change management, you must read Notes 60281, 60973, and 48962.
    To date, it is not possible to integrate customer-specific tables in material master maintenance without making a modification. However, you can create customer-specific development objects containing the essential additional logic. You can then integrate these development objects in your system as part of only a minor modification.
    check this link. It may helps you to solve your issue.
    Thanks
    Sravan

  • Drop down in the selection for the field from the table

    Hi.
    i want to put the drop down for the field from the table fo which i dont know the number of entries for the field zregion1 of the table zbwcntry.
    please tell me how to use the function module and what could be the line of codes.
    the drop down is for the select option on the slection screen of the classical report.
    please help .

    HI,
    Check below code..it may help you.
    REPORT Zbunu .
    TYPES :BEGIN OF STR ,
           MATNR TYPE MATNR ,
           END OF STR .
    DATA : ITAB TYPE TABLE OF STR WITH HEADER LINE,
           VAR TYPE MARA-MATNR .
    PARAMETERS : S_MATNR TYPE MATNR ,
                  P_MATNR TYPE MATNR.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_MATNR .
    SELECT MATNR FROM MARA INTO
    CORRESPONDING FIELDS OF TABLE ITAB UP TO 1000 ROWS.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
      DDIC_STRUCTURE         = ' '
        retfield               = 'MATNR'
      PVALKEY                = ' '
       DYNPPROG               = SY-CPROG
       DYNPNR                 = SY-DYNNR
       DYNPROFIELD            = 'S_MATNR'
      STEPL                  = 0
      WINDOW_TITLE           =
      VALUE                  = ' '
       VALUE_ORG              = 'S'
      MULTIPLE_CHOICE        = ' '
      DISPLAY                = 'X'
      CALLBACK_PROGRAM       = ' '
      CALLBACK_FORM          = ' '
      tables
        value_tab              = ITAB
      FIELD_TAB              =
      RETURN_TAB             =
      DYNPFLD_MAPPING        =
    EXCEPTIONS
       PARAMETER_ERROR        = 1
       NO_VALUES_FOUND        = 2
       OTHERS                 = 3
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Regards
    Ansumesh

  • Field in the table but not in the datasource

    I have a datasource 0co_pc_act_05 based on mbew table . I need a field from that table , which is not present in the datasource , what should i do .?
    How can i get the field from the table into the datasource?
    Thanks

    hi Mike,
    try following steps
    - in r/3 transaction rsa6 choose the datasource, click enhance strucutre, then append structure, system will propose z..., confirm it, in the next screen, type in the field name e.g abcd
    - activate the append structure
    - back to rsa6 choose the datasource, click edit, remove mark in column 'hidden' field for that field, save the datasource.
    - in this case you no need to do user exit since that field exist in the origin table where the data extracted.
    - recheck with rsa3
    later in bw side
    - create new infoobject, then right click the datasource and 'replicate datasource', change transfer rules, move the new field from right side to left (to be included in transfer structure), then assign the field by type in the new created infoobject name, activate the transfer rules. include also this new object in infocube etc.
    hope this helps.

  • Create search helps for fields of custom tables

    Hi,
    Could any one please provide me the step by step process to create search helps for fields in custom tables?
    Thanks in advance,
    Nobin.

    Hello Nobin
    There is basically no difference between a search help for standard vs. customer tables.
    An important choise is the selection method for your search help:
    Either you use your custom table, a view or a search help user-exit if you need to implement very specific requirements.
    Assuming that you can use your DB table as selection method the further implementation of the search help is quite straightforward:
    (1) Define the parameters you would like to have a selection criteria (SPos = SPos) and which should appear on the result list (= LPos).
    (2) Define the parameters that can be used as input for the selection (flag IMP) and are returned by the search help (flag EXP)
    Regards
      Uwe

  • Fields missing in SM30 after adding new fields to the table

    Hi ABAPers,
    I added a new field & marked another field as primary key in the table. Then I generated the table maintenance view for the table in SE55 and adjusted Database utility SE14.
    When i saw the table in SM30. The number of fields in the overview screen of SM30 shows less field then existing in table. i.e in my table i have 10 fields(3 primary). in SM30 it shows only 5 fields(3 primary + 2 normal fields)
    In SE51, the overview screen of the table show less fields in the field list..
    I want all the fields in the Table maintenance overview screen. Please suggest me a way forward friends..
    Note: the system is 4.0B.
    Thanks...Suresh Kumar

    Hi
    You have to re-generate your dialog for SM30 by table maitenance generator.
    - From Se11 go to table maitenance generator
    - Choose update icon
    - Set flags for NEW FIELD
    - Go to expert
    - Set flag to re-generate dynpro
    Message was edited by: max bianchi

  • Changing the attibutes of a field in the table will affect existing data

    Hi Experts,
    If I want to changne the field attribute of particular field in the table, this table whoes field is changed is used in 15 more tables.Will that affect the data in production after changing the field attributes in all the 15 tables.
    Thanks in Advance.
    Regards,
    IFF

    Hi,
    Definitely data will effect in all tables and also you have to modify all the programs which are used modified tables.
    Regards,
    Peranandam

  • Number of fields in the table

    Hi experts,
    How do you obtain the number of fields of a particular table ?
    I want the count of the fields of a table.
    Thanks in advance,
    Chithra.

    Check the code below:
    DATA: d_ref TYPE REF TO data,
    i_alv_cat TYPE TABLE OF lvc_s_fcat,
    ls_alv_cat LIKE LINE OF i_alv_cat,
    fname TYPE fieldname,
    ncomp(9) TYPE n,
    rcount(9) TYPE n,
    fcount(3) TYPE n.
    TYPES: BEGIN OF itab1,
    message(50) TYPE c,
    END OF itab1.
    DATA: g_itab1 TYPE STANDARD TABLE OF itab1.
    DATA: wa_itab1 TYPE itab1.
    ncomp = 1.
    rcount = 0.
    TYPES: tabname LIKE dcobjdef-name,
    fieldname LIKE dcobjdef-name.
    PARAMETER: p_tablen TYPE tabname. "Input table field
    DATA: BEGIN OF itab OCCURS 0.
    INCLUDE STRUCTURE dntab.
    DATA: END OF itab.
    FIELD-SYMBOLS : <f_fs> TYPE table,
    <f_fs2> TYPE ANY,
    <f_fs3> TYPE ANY,
    <f_fs4> TYPE ANY.
    REFRESH itab.
    CALL FUNCTION 'NAMETAB_GET' "Fetches the fields
    EXPORTING
    langu = sy-langu
    tabname = p_tablen
    TABLES
    nametab = itab
    EXCEPTIONS
    no_texts_found = 1.
    LOOP AT itab .
    ls_alv_cat-fieldname = itab-fieldname.
    ls_alv_cat-ref_table = p_tablen.
    ls_alv_cat-ref_field = itab-fieldname.
    ls_alv_cat-seltext = itab-fieldtext.
    ls_alv_cat-reptext = itab-fieldtext.
    APPEND ls_alv_cat TO i_alv_cat.
    fcount = fcount + 1.
    ENDLOOP.
    WRITE:/ fcount.
    WRITE: ' number of column'.
    internal table build
    CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
    it_fieldcatalog = i_alv_cat
    IMPORTING
    ep_table = d_ref.
    ASSIGN d_ref->* TO <f_fs>. " Dynamic table creation with fields of the
    *table
    DATA: l_field TYPE fieldname,
    l_field1 TYPE fieldname.
    SELECT * FROM (p_tablen) INTO CORRESPONDING FIELDS OF TABLE <f_fs>.
    "Fetching of the data from the table
    rcount = 0.
    LOOP AT <f_fs> ASSIGNING <f_fs2>.
    rcount = rcount + 1.
    DO fcount TIMES.
    "Here u can check the validations and process
    ASSIGN COMPONENT ncomp OF STRUCTURE <f_fs2> TO <f_fs4>.
    IF NOT <f_fs4> IS INITIAL.
    MOVE <f_fs4> TO l_field1.
    ncomp = ncomp + 1.
    ELSE.
    CONCATENATE 'IN ROW' rcount 'COLUMN' ncomp 'IS BLANK' INTO wa_itab1.
    APPEND wa_itab1 TO g_itab1.
    ncomp = ncomp + 1.
    ENDIF.
    ENDDO.
    CLEAR:ncomp.
    ENDLOOP.
    LOOP AT g_itab1 INTO wa_itab1.
    WRITE:/ wa_itab1 'is blank'.
    ENDLOOP.
    regards
    Kannaiah

  • Include a field in the table maintenance generator

    Hi All,
    There is a Z table with MATNR and another numeric field and the table maintenance generator exists for the table. The requirement is to include another field for MAKTX ( Material description) in the table maintenance generator with input disabled. Is it possible to do the same in the table maintenance generator else please suggest me the best solution.
    Thanks in Advance.

    Hi Srinivasa,
    This is quite simple, first add the field MAKTX into the Table and activate it .
    Now again generate the Table maintainence for the table.
    from Table maintainence generator go to the main program
    there click the screen maintained for Table maintainence generator .
    in the Pbo of the screen write the following code.
    assume table name is table1.
    Loop at screen.
    if screen-name = table1-maktx.
    screen-input = '0'.
    modify screen.
    endif.
    endloop.
    this will automatically disable the material description field in the Table Maintainence Generator.
    This is will solve your problem
    Regards,
    Madhavi

  • Add columns with custom fields in the table control of MIGO

    Hi,
    I have to add custom fields in the table control view of item in the MIGO.  I have added the fields in the GOITEM structure and i am able to display it in the item details tab.  I want the same fields to be visible as columns in the table control view of the items.
    I found that TV_GOITEM is the control in SAPLMIGO program referring to the table control of items but it is referring only to the standard fields available in Screen 200.
    Please let me know if there is any screen exit or option to add the custom fields in the control TV_GOITEM.
    Thanks.

    Hi,
    Thanks for your reply.  I have added the custom fields in the item detail.  But the customer wants the custom fields in the table view also.
    Is there any screen exit available to modify the table control of MIGO?
    Thanks.

Maybe you are looking for

  • How to use airplay with pandora on macbook

    I'm trying to use airplay to play a browser based player over airplay speakers. I can do this with my iPhone but i can't figure out how to do it on Macbook. Please help

  • Java 1.6 in Mac OS X

    Hi, i have a problem, im developed program in Windows in NetBeans 5.5, after write program, i want execute my jar-file in MacOSX(10.4), and Macos write me in conose, that i have 1.42 version of VM Java!, where i can download 1.6 version for my mac

  • How to download program with screens & menus

    Hi, I have created a report which has many includes, screens & menus created using screen & menu painter. How I can download this program with all the objects. Or I have to download each include & screen using download facility. Even after that there

  • NaN & Inf in Formula node

    Are there no NaN, Inf, -Inf constants in formula nodes? Typing for example "x = NaN;" doesn't work. I can generate them with 0/0, 1/0, -1/0 but it's not very elegant...

  • Dynamic component addition in JSF

    I have a loan application that I've done using JSF. The form has, among other things, fields for previous addresses as well as previous employers. Initially I'm only including enough fields for the user to enter 2 address and 2 employers. Since we're