F4 is not working in my system.

Hi,
F4 help is not working in my system,its working fine in all other system.functional peopel are getting problem in f4 help.i checked the settings all are fine.Guide me for the same how to resolve this.
Thanku

Hi,
Check the system which has F4 not working for help in tcode SR13 if the correct values are maintained.
You can compare the system where its working and try and copy the parameters if its applicable.
Cheers Sam

Similar Messages

HT5649 Version 11.1.4 Does Not Work on my system

I had itunes version 11.1.3.8 and it was working just fine. I believe this version is the 32 bit version.
itunes sent me version 11.1.4 which is a 64 bit version and it DOES NOT work on my system.
Some how this important file was deleted. And I keep getting this message.
The following is the message I get everytime I turn on my computer
I can close it and my computer works fine except for itunes. I can not get into Itunes at all.
MSVCR80.dll is missing. Itunes was not installed correctly please reinstall itunes.
ERROR 7 windows error 126
How do I remove version 11.1.4 completely and Reinstall version 11.1.3.8
And do I remove everything to do with APPLE and reinstall.
I have tried numerous times to uninstall Version 11.1.4 and it is removed but when I
reinstall it is always Version 11.1.4 I would like Version 11.1.3.8
Please advise Jeff Beez

Hello there, Jeff.
The following Knowledge Base article offers up the instructions on how to resolve the very issue you're describing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Sharepoint web application is not working on client system

my sharepoint we application is working on premises but it is not working on local system

I assume you mean its working on the server, but not on your client. If so, make sure that you have registered the URL for the web application in your Domain Name Server (DNS). If you can't resolve the name you won't be able to reach the web
application.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

SharedServices and Workspace URL's are not working in EPM System 11.1.2.2

Hello,
SharedServices and Workspace URL's are not working in EPM System 11.1.2.2
I have installed EPM system V11.1.2.2 in single server environment (MS 2008 Server R2) with following components:
* Foundation Services
* HFM
* FDM
Have used embedded Weblogic server as application web server and Oracle HTTP server as web server. The installation was successful.
While configuration,
1) I selected the option to deploy web applications SharedServices and Workspace to a single managed server. The applications got successfully deployed to EPMServer0.
2) Also, I selected to configure Oracle HTTP server as web server.
Both these steps were successful.
But SharedServices and Workspace URL's are not working. Getting 404 error.
SharedServices : http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
Workspace : http://inmum01hyp05.internal.vodafone.com:19000/workspace/
When I checked Weblogic admin console, EPMServer0 is in SHUTDOWN state, tried to start it but it goes in ADMIN state instead of RUNNING.
Checked EPMServer0 log at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given at the end of this message.
Can anyone please suggest a solution for this.
####<Jun 6, 2013 11:43:20 AM IST> <Emergency> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200246> <BEA-149259> <Server 'EPMServer0' in cluster 'EPMServer' is being brought up in administration state due to failed deployments.>
####<Jun 6, 2013 11:43:20 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499200902> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201090> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201106> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebService> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201121> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <WebLogicServer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201137> <BEA-000256> <Invoking weblogic.transaction.internal.StartupClass.main(null)>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149059> <Module dms.war of application DMS Application [Version=11.1.1.1.0] is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:21 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499201168> <BEA-149060> <Module dms.war of application DMS Application [Version=11.1.1.1.0] successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149059> <Module /inspection.wsil of application wsil-wls is transitioning from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:43:22 AM IST> <Info> <Deployer> <INMUM01HYP05> <EPMServer0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwO7UBi7e5V5u35EiX1Hg2Xf000000> <1370499202402> <BEA-149060> <Module /inspection.wsil of application wsil-wls successfully transitioned from STATE_PREPARED to STATE_ADMIN on server EPMServer0.>
####<Jun 6, 2013 11:44:13 AM IST> <Info> <Diagnostics> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1370499253433> <BEA-320000> <The Diagnostics subsystem is initializing on Server EPMServer0.>
Thanks in advance.
Tej

Hi John,
today's update:
* Uninstalled EPM system V11.1.2.2 completely and after rebooting the server installed EPM system V11.1.2.2 again.
* During configuration, deployed SharedServices and Workspace to single managed server EPMServer0 on Weblogic server and configured to Oracle HTTP server as web server. Configuration seems successful.
* Started EPM system.
* checked Weblogic admin console - EPMServer0 goes into ADMIN state from STARTING.
* Checked EPMServer0 logs at "D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs" and found the error given below:
####<Jun 7, 2013 2:12:14 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594534718> <BEA-149205> <*Failed to initialize the application 'SHAREDSERVICES [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false]..*
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: epm-hss-libraries, exact-match: false].
 at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
 at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
 at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
 at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
 at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
 at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
 at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
 at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
 at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
 at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
 at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
 at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
 at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
 at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
 at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
 at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
 at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
 at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
####<Jun 7, 2013 2:12:15 PM IST> <Warning> <J2EE> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535124> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: epm-bpmui-libraries, referenced from: D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\WORKSPACE_11.1.2.0\riys07]. Make sure the referenced optional package has been deployed as a library.>
####<Jun 7, 2013 2:12:15 PM IST> <Error> <Deployer> <INMUM01HYP05> <EPMServer0> <[STANDBY] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JwTnBZV7e5V5u35EiX1HgPn0000001> <1370594535186> <BEA-149205> *<Failed to initialize the application 'WORKSPACE [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false]..*
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.applcore.model, exact-match: false], [Extension-Name: xerces, exact-match: false].
 at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
 at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
 at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
 at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
 at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
 at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
 at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
 at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:144)
 at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:40)
 at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:191)
 at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:22)
 at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
 at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:166)
 at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
 at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
 at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
 at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
 at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:545)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
Can you please suggest how to overcome this error of Weblogic?
Thanks in advance,
Tej

Web reporting does not work in BW system

Hi-
I'm a BW consultant with very little BASIS knowledge and have been asked to look into why web reporting is not working on our system.
We get the following message when trying to run BW queries on the web:
Not found
The following error occured:
%3cpre%3e%0aLOCATION+++MessageServeronhosttongue%0aERROR+++++Grouptonguenotfound%0a%0aTIME+++++++TueMar2004%3a21%3a132007%0aRELEASE+++640%0aCOMPONENT+LG%0aVERSION+++5%0aRC++++++++-6%0aMODULE++++lgxx_mt%2ec%0aLINE++++++3518%0aDETAIL++++LgIGroup%0aCOUNTER++++10%0a%3c%2fpre%3e
I've checked SICF and all services are activated. I suspect that the problem is in the RZ10 parameters, but do not know what needs to be set there. Here are our settings:
rdisp/max_wprun_time 3600
abap/cache_area 10000000
abap/buffersize 1500000
login/system_client 100
INSTANCE_NAME DVEBMGS00
SAPSYSTEM 00
rdisp/wp_no_dia 10
rdisp/wp_no_btc 6
rdisp/wp_no_vb 2
rdisp/wp_no_vb2 1
rdisp/wp_no_enq 1
rdisp/wp_no_spo 1
DIR_TRANS /usr/sap/trans
ms/server_port_<xx> PROT=HTTP, PORT=8080
icm/server_port_0 PROT=HTTP,PORT=8080,EXTBIND=1
DIR_ORAHOME /oracle/BWD/920_64
ipc/shm_psize_10 104000000
ipc/shm_psize_14 0
ipc/shm_psize_18 0
ipc/shm_psize_19 0
ipc/shm_psize_30 0
ipc/shm_psize_40 114000000
ipc/shm_psize_41 0
Is there anything obvious missing?
Thanks,
Tristan

Following seems a little odd....
ms/server_port_<xx> PROT=HTTP, PORT=8080
I would expect something like:-
ms/server_port_0 = PROT=HTTP,PORT=8102 (or other relevent port number)

Custome Tcode is not working in QA system but working in DEV system

Hello,
We have copied QM11 tacode to ZQM11. We found this ZQM11 tcode is not working in QA system, but properly working in DEV system. When we are execute this tcode from QA system with all required input, it says
"No objects could be selected that met your selection criteria."
But when do it in DEV system it is working fine. I have done following steps to check error
1) All authorizations are good
2) I have compared E070 and E071 table to found transport done with proper way.
3) I have checked SE93, tcode condition is good.
4) SE97 -->found call transaction is QM11 for ZQM11
5) From program code level Authority check maintained properly.
AUTHORITY-CHECK OBJECT 'Q_QMEL'
             ID 'QMART'    FIELD I_QMART
             ID 'TCD'      FIELD I_TCODE
             ID 'WERKS'    DUMMY.
6) Performed authorization trace to found error agains object Q_QMEL (RC =4), but in the role Q_QMEL has define with it's proper value supplied by our functional team.
7) Shows all active object in SU24 against ZQM11 are good
8) When we call tcode it has thrown the error agains Q_QMEL only
I am not able to understand why does not work this tcode in QA system, although working in DEV is good.
Please help me to resolve this issue
Thanks
Pavel

Bieng declared $WERKS field as DUMMY, is not relevant, so no matter its value, it will pass..
There's a catch! If even DUMMY means literally that no matter user has any value, he is still authorized but in reality for such \fields authorization check is only successful when a value ' ' or * is found in user's authorization else it errors out.
Sorry confused with programs where AUTHORITY-CHECK has ' ' coded instead of DUMMY. You are right, DUMMY specified for as field would pass authorization check with any/no value in user's authorization. Please ignore my statement
Sandipan
Edited by: Sandipan Choudhury on Dec 29, 2010 2:11 AM

I have downloaded OS x 10.9.5 and it has not worked and my system (mimi mac the original version) doesn't allow me to see the tool bar etc?? how do I reboot it without losing everything?

I have downloaded OS x 10.9.5 and it has not worked and my system (mimi mac the original version) doesn't allow me to see the tool bar etc?? how do I reboot it without losing everything?

You're talking about the dock?
To check on that, go to System Preferences > Dock > indicate your preference.
I can get iTunes up, and safari, but i don't know how
Not sure what you mean - if you can "get it up" - does that mean you can launch it? What do you not know?

I upgraded Safari in my Mac (10.6.8 Leopard) but the new version does not work with my system so that I now have not a working browser. How can I solve the problem and/or install back my previous Safari version?

I have upgraded Safari in my Mac, but the new Safari does not work with my system. So I find myself without any working browser. How can I solve this problem and/or install my previous Safari version?

Reinstall Safari 5.1.10 for OS X 10.6.8: http://support.apple.com/kb/dl1569. Might do the trick.
But, frankly, I don't think that simply reinstalling the old Safari will work because of all the peripheral, under the hood changes that happen when you upgrade from one version of Safari to another. Reinstalling 5.1.10 may be insufficient to turn back the clock. (This is the moment where a Time Machine or another form of full backup would save your bacon.)
While you're getting a copy of Safari 5.1.10, get a copy of Firefox (https://www.mozilla.org/en-US/firefox/desktop/), too, so that you have an alternate browser to use as you're sorting matters.

Help is not working in Hyperion System 9 WebAnalysis

two months back we have installed Hyperion System 9.2.0.3 BI+ server and is working fine. however recently one user complained that WebAnalysis help is not working. we are getting "page cannot be displayed" when clicking on Help --> contents and index from WebAnalysis -- <a target=_blank class=ftalternatingbarlinklarge href="http://hostname:19000/WenAnalysis">http://hostname:19000/WenAnalysis</a> this is the direct link to the webanalysis help <a target=_blank class=ftalternatingbarlinklarge href="http://hostname:19000/workspace/docs/en/wa_user/frameset.htm?/workspace/docs/en/wa_user/launch.html">http://hostname:19000/workspac...n/wa_user/launch.html</a> Do you know how to fix this?

Hi Friends,
I am working on Sandbox Server, in that Help (F1) is not working. When i try to click F1 system is opening the popup and showing the following message-
The page cannot be displayed
Plz help
Regards
Goutham

The Port : 6001 is not working in the system

Hi Experts,
OS : AIX 6.1
SAP : SAP Netweaver EHP1
In the OS level the Port : 6001 is not working and giving the out put as...
pb2adm> telnet abcprdpb2 6001
Trying...
telnet: connect: A remote host refused an attempted connect operation.
Virtual host : abcprdpb2
As it is the BI java stack system & I configured the SMD & wily in the system. From the BI java stack system the wily agent is not working and it uses the port : 6001.
Now the issue is regarding to the port : 6001
when telnet in the same system which is Virtual host : abcprdpb2 is not working and which I have given the output above. It is working when I telnet to the other systems. Please see the output below...
pb2adm> telnet abcprd001 6001
Trying...
Connected to abcprd001.
Escape character is '^]'.
Connection closed.
From other system virtual host : abcprd001
As I have checked with the firewall team and said it is fine in the system and same us AIX team also. But still port : 6001 issue is not resolved in the Virtual host : abcprdpb2
Can you please let me know how to open the port : 6001 in the Virtual host : abcprdpb2 and also how we can confirm that port : 6001 is opened or blocked in the Virtual host : abcprdpb2.
Thanks & Regards,
Sandeep.

Hi,
The both mentioned virtual systems are in different LPAR's (Physical host).
Already I have checked the /etc/services and looks every thing is fine in the file. I have also checked the file inetd.conf and I didn't find any thing # on the Telnet.It seems every thing is fine in the both files.
Can you please look in to it and provide some thing which I have to look in the OS level.
Thanks & Regards,
Sandeep

Extraction and Reporting is not working in BI SYSTEM

Hi,
The BI developement r shows error an License Expire.Currently i change the system date and working fine. If changing the system date modeling part is working fine. But extraction and Reporting is not working. please help me to solve this problem.

HI,
If the license is expired then appky for the permanent license from Service market place and install it in the system through SLICENSE TCode. For this you need to have S-user ID to access service market place to apply for license.
Regards,
Sharath

[SLOVED] All my USB not work after upgrade system.

Hello all,
I'm new in Arch, and i install my system with your LiveCD (2005).
In the first boot, all work good. But after upgrade (pacman -Syu), all my USB device (Keyboard, Mouse) not work.
I'm not using (yet) with Xorg, just in command shell (tty1), But i can't press anything cuz my keyboard not work.
I try to do that (https://bbs.archlinux.org/viewtopic.php … 19#p906119), but no work to me too.
What i can to do to fix this?
My dmesg:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 11:32:37 CEST 2010
Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf564000 (usable)
BIOS-e820: 00000000bf564000 - 00000000bf5bb000 (ACPI NVS)
BIOS-e820: 00000000bf5bb000 - 00000000bf5db000 (reserved)
BIOS-e820: 00000000bf5db000 - 00000000bf5ec000 (ACPI NVS)
BIOS-e820: 00000000bf5ec000 - 00000000bf600000 (reserved)
BIOS-e820: 00000000bf600000 - 00000000bf602000 (usable)
BIOS-e820: 00000000bf602000 - 00000000bf603000 (ACPI data)
BIOS-e820: 00000000bf603000 - 00000000bf60b000 (reserved)
BIOS-e820: 00000000bf60b000 - 00000000bf615000 (ACPI NVS)
BIOS-e820: 00000000bf615000 - 00000000bf63e000 (reserved)
BIOS-e820: 00000000bf63e000 - 00000000bf681000 (ACPI NVS)
BIOS-e820: 00000000bf681000 - 00000000bf800000 (usable)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000023f800000 (usable)
NX (Execute Disable) protection: active
DMI 2.6 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
No AGP bridge found
last_pfn = 0x23f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 23F800000 mask FFF800000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xbf800 max_arch_pfn = 0x400000000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009ec00 (usable)
modified: 000000000009ec00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000bf564000 (usable)
modified: 00000000bf564000 - 00000000bf5bb000 (ACPI NVS)
modified: 00000000bf5bb000 - 00000000bf5db000 (reserved)
modified: 00000000bf5db000 - 00000000bf5ec000 (ACPI NVS)
modified: 00000000bf5ec000 - 00000000bf600000 (reserved)
modified: 00000000bf600000 - 00000000bf602000 (usable)
modified: 00000000bf602000 - 00000000bf603000 (ACPI data)
modified: 00000000bf603000 - 00000000bf60b000 (reserved)
modified: 00000000bf60b000 - 00000000bf615000 (ACPI NVS)
modified: 00000000bf615000 - 00000000bf63e000 (reserved)
modified: 00000000bf63e000 - 00000000bf681000 (ACPI NVS)
modified: 00000000bf681000 - 00000000bf800000 (usable)
modified: 00000000fed1c000 - 00000000fed20000 (reserved)
modified: 00000000ff000000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 000000023f800000 (usable)
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fcda0] fcda0
init_memory_mapping: 0000000000000000-00000000bf800000
0000000000 - 00bf800000 page 2M
kernel direct mapping tables up to bf800000 @ 16000-1a000
init_memory_mapping: 0000000100000000-000000023f800000
0100000000 - 023f800000 page 2M
kernel direct mapping tables up to 23f800000 @ 18000-22000
RAMDISK: 37c44000 - 37e19ab8
ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)
ACPI: XSDT 00000000bf5ae068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000bf5b7ba0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000bf5ae140 09A5C (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000bf60cf80 00040
ACPI: APIC 00000000bf5b7c98 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000bf5b7d10 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 00000000bf5b7e18 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000bf5b7e58 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
ACPI: Local APIC address 0xfee00000
(13 early reservations) ==> bootmem [0000000000 - 023f800000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 00016d7b38] TEXT DATA BSS ==> [0001000000 - 00016d7b38]
#2 [0037c44000 - 0037e19ab8] RAMDISK ==> [0037c44000 - 0037e19ab8]
#3 [00016d8000 - 00016d826b] BRK ==> [00016d8000 - 00016d826b]
#4 [00000fcdb0 - 0000100000] BIOS reserved ==> [00000fcdb0 - 0000100000]
#5 [00000fcda0 - 00000fcdb0] MP-table mpf ==> [00000fcda0 - 00000fcdb0]
#6 [000009ec00 - 00000fca90] BIOS reserved ==> [000009ec00 - 00000fca90]
#7 [00000fcd24 - 00000fcda0] BIOS reserved ==> [00000fcd24 - 00000fcda0]
#8 [00000fca90 - 00000fcd24] MP-table mpc ==> [00000fca90 - 00000fcd24]
#9 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000]
#10 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000]
#11 [0000016000 - 0000018000] PGTABLE ==> [0000016000 - 0000018000]
#12 [0000018000 - 000001d000] PGTABLE ==> [0000018000 - 000001d000]
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880001800000-ffff8800087fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x0023f800
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x000bf564
0: 0x000bf600 -> 0x000bf602
0: 0x000bf681 -> 0x000bf800
0: 0x00100000 -> 0x0023f800
On node 0 totalpages: 2092659
DMA zone: 56 pages used for memmap
DMA zone: 110 pages reserved
DMA zone: 3816 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 765725 pages, LIFO batch:31
Normal zone: 17892 pages used for memmap
Normal zone: 1290780 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000bf564000 - 00000000bf5bb000
PM: Registered nosave memory: 00000000bf5bb000 - 00000000bf5db000
PM: Registered nosave memory: 00000000bf5db000 - 00000000bf5ec000
PM: Registered nosave memory: 00000000bf5ec000 - 00000000bf600000
PM: Registered nosave memory: 00000000bf602000 - 00000000bf603000
PM: Registered nosave memory: 00000000bf603000 - 00000000bf60b000
PM: Registered nosave memory: 00000000bf60b000 - 00000000bf615000
PM: Registered nosave memory: 00000000bf615000 - 00000000bf63e000
PM: Registered nosave memory: 00000000bf63e000 - 00000000bf681000
PM: Registered nosave memory: 00000000bf800000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at bf800000 (gap: bf800000:3f51c000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880008a00000 s89176 r8192 d21416 u524288
pcpu-alloc: s89176 r8192 d21416 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060321
Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/sdb5 ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8167004k/9428992k available (3449k kernel code, 1058356k absent, 202696k reserved, 1818k data, 484k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:768
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 83886080 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3311.105 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6624.13 BogoMIPS (lpj=11037016)
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 CMCI:5 CMCI:6 CMCI:7 CMCI:8
using mwait in idle threads.
Performance Events: Nehalem/Corei7 events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
ACPI: Core revision 20091214
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz stepping 07
Booting Node 0, Processors #1
CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
#2
CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
#3 Ok.
CPU 3 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8
Brought up 4 CPUs
Total of 4 processors activated (26499.22 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI Error (psargs-0359): [RAMB] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20091214/nsinit-340)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff] (ignored)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xfe707000-0xfe70700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xfe706000-0xfe7063ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xfe700000-0xfe703fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xfe705000-0xfe7053ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 20: [io 0xf090-0xf09f]
pci 0000:00:1f.2: reg 24: [io 0xf080-0xf08f]
pci 0000:00:1f.3: reg 10: [mem 0xfe704000-0xfe7040ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:00:1f.5: reg 10: [io 0xf070-0xf077]
pci 0000:00:1f.5: reg 14: [io 0xf060-0xf063]
pci 0000:00:1f.5: reg 18: [io 0xf050-0xf057]
pci 0000:00:1f.5: reg 1c: [io 0xf040-0xf043]
pci 0000:00:1f.5: reg 20: [io 0xf030-0xf03f]
pci 0000:00:1f.5: reg 24: [io 0xf020-0xf02f]
pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xfe620000-0xfe63ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xfe600000-0xfe61ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10: [mem 0xfe640000-0xfe643fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: reg 10: [io 0xd040-0xd047]
pci 0000:03:00.0: reg 14: [io 0xd030-0xd033]
pci 0000:03:00.0: reg 18: [io 0xd020-0xd027]
pci 0000:03:00.0: reg 1c: [io 0xd010-0xd013]
pci 0000:03:00.0: reg 20: [io 0xd000-0xd00f]
pci 0000:03:00.0: reg 30: [mem 0xfe500000-0xfe50ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:05:00.0: reg 10: [io 0xc000-0xc0ff]
pci 0000:05:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:05:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 06-07] (subtractive decode)
pci 0000:06:00.0: PCI bridge to [bus 07-07] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR19._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:0b: [io 0x0400-0x0453] has been reserved
system 00:0b: [io 0x0458-0x047f] has been reserved
system 00:0b: [io 0x0500-0x057f] has been reserved
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0b: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0c: [io 0x0454-0x0457] has been reserved
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.4: PCI bridge to [bus 03-03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:1c.4: bridge window [mem pref disabled]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5: bridge window [io disabled]
pci 0000:00:1c.5: bridge window [mem disabled]
pci 0000:00:1c.5: bridge window [mem pref disabled]
pci 0000:00:1c.6: PCI bridge to [bus 05-05]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem disabled]
pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: bridge window [io disabled]
pci 0000:06:00.0: bridge window [mem disabled]
pci 0000:06:00.0: bridge window [mem pref disabled]
pci 0000:00:1c.7: PCI bridge to [bus 06-07]
pci 0000:00:1c.7: bridge window [io disabled]
pci 0000:00:1c.7: bridge window [mem disabled]
pci 0000:00:1c.7: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:06:00.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:06: resource 3 [io 0x0000-0xffff]
pci_bus 0000:06: resource 4 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:07: resource 6 [io 0x0000-0xffff]
pci_bus 0000:07: resource 7 [mem 0x00000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1878k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88000979e000 - ffff88000d79e000
software IO TLB at phys 0x979e000 - 0xd79e000
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1304838033.699:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15956
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
pcieport 0000:00:1c.6: irq 28 for MSI/MSI-X
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 484k freed
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 20
ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 20
ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 20
ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 20
pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_acpi 0000:03:00.0: setting latency timer to 64
pata_acpi 0000:03:00.0: PCI INT A disabled
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATA-6: WDC WD1200JD-00GBB0, 02.05D02, max UDMA/100
ata1.01: 234441648 sectors, multi 16: LBA48
ata1.01: applying bridge limits
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA WDC WD1200JD-00G 02.0 PQ: 0 ANSI: 5
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB05, max MWDMA2
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.00: limiting SATA link speed to 1.5 Gbps
ata2.00: limiting speed to MWDMA2:PIO3
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2.00: configured for MWDMA2
ata2.00: qc timeout (cmd 0xa0)
ata2.00: TEST_UNIT_READY failed (err_mask=0x4)
ata2.00: disabled
ata2.00: hard resetting link
ata2.01: hard resetting link
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.01: link offline, clearing class 3 to NONE
ata2: EH complete
pata_via 0000:03:00.0: version 0.3.4
pata_via 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_via 0000:03:00.0: setting latency timer to 64
scsi4 : pata_via
scsi5 : pata_via
ata5: PATA max UDMA/133 cmd 0xd040 ctl 0xd030 bmdma 0xd000 irq 16
ata6: PATA max UDMA/133 cmd 0xd020 ctl 0xd010 bmdma 0xd008 irq 16
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:1:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb2 sdb3 sdb4 < sdb5 >
sda: sda1 sda2
sd 0:0:1:0: [sdb] Attached SCSI disk
sda3
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sdb5): mounted filesystem with ordered data mode
<30>udev[901]: starting version 167
Adding 7030776k swap on /dev/sdb2. Priority:-1 extents:1 across:7030776k
Thanks a lots.
Last edited by KingYes (2011-05-08 11:03:55)

FYI, the latest installation CD version is "2010.05". It's best to use the latest. Get it from http://www.archlinux.org/download/
I'm not sure but I believe all other LiveCDs are custom made outside of the official Archlinux development team.
I recommend downloading the CD I mentioned and follow this guide: https://wiki.archlinux.org/index.php/Beginners%27_Guide
I've installed arch many times on different hardware and the only time I lost mouse and keyboard was after I removed "10-evdev.conf" and "10-quirks.conf" from /etc/X11/xorg.conf.d/. I copied both back from backups, rebooted and m&k were functional again. My guess is "10-evdev.conf" was the file I needed. Check both these files exist.

SPROXY not working in application system

Hello all,
I have been trying to make SPROXY work in my QAS ERP 2004 SPS23 system
for a few days now but I can not make it. I have
configured SPROXY in the past for my sandbox and DEV system with
success but I do not seem to have any luck in QAS.
My PI landscape consists of sandbox, developement, qa and production
systems. The version is PI 7.0 SPS21
My ERP landscape consists of the same 4 systems but in version 6.40 -
ERP 2004 SPS23
All non production systems use a central SLD that runs in the PI development
box (PID)
The error message I get is as follows:
When I run SPROXY in ERP QAS client 330, I get : "No connection to Integration
Builder (only local data visible)"
When I do Goto --> Integration Builder, I get the message "Integration
Builder address not maintained"
However, when I do Goto --> Connection Test, from the 4 reports I have
to run, two work and two do not work:
=>Check/maintain with report SPROX_CHECK_IFR_ADDRESS works and shows the correct address for Integration repository
=>Check with report SPROX_CHECK_HTTP_COMMUNICATION works
The other two reports
=>Check with report SPROX_CHECK_IFR_RESPONSE
==>Check with report SPROX_CHECK_IFR_CONNECTION
return: Integration builder data not undestood.
SLDCHECK runs fine: All green and invokes correct IE session with the correct SLD URL (central SLD)
SLDAPICUST shows the correct SLD (central)
SXMB_ADM --> Integration Engine Configuration shows the destination RFC
SAPIS_PIQ
which is defined in SM59 as type H and works fine
TCP RFCs LCRSAPRFC and SAPSLDAPI work
The corresponding JCos in Visual Administration look ok
I have registered the queues in SXMB_ADM and they registered ok .
The /sap/xi/engine service is active in both the application system and the PI system (QAs and PIQ)
Finally the exchange profile settings in PIQ are fine as well
com.sap.aii.connect.repository.name : piqas.finance.local
com.sap.aii.connect.repository.httpport : 50000
com.sap.aii.connect.repository.contextRoot :rep
com.sap.aii.connect.integrationbuilder.startpage.url : rep/start/index.jsp
com.sap.aii.applicationsystem.serviceuser.name: PIAPPLUSER
and the password is set.
PIAPPLUSER is service user and is not locked.
I have tested SLDCHECK in PIQ and SLDAPICUST and they look ok as well.
Any other clues? Any way I can investigate further via checking logs
and traces to find out what is wrong?
The "Data not understood" message is not helping me much in determining
what is wrong
Many thanks
Andreas

Hi Andreas,
Please go through the below blog which explains you step by step in proxy connectivity.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Regards,
Naveen.

Backupeventlog not working for remote system in PowerShell

I have the following code snippet that works if I specify localhost or the name of the local computer, but does not work if set to a remote server. I am running the script as Administrator using my Domain Admin account. Both local and remote systems
are Windows Server 2012 and in the same domain. PowerShell version = 3.0.
Param(
[parameter(Mandatory=$true,ValueFromPipeline=$true)]
[ValidateScript({Test-Connection $_ })]
[String]
$Server,
[parameter(Mandatory=$true,ValueFromPipeline=$true)]
[String]
$LogFileName,
[parameter(Mandatory=$true,ValueFromPipeline=$true)]
[ValidateScript({Test-Path $_ -PathType 'Container'})]
[String]
$OutputFolder
$EventLog = Get-WmiObject win32_nteventlogfile -ComputerName $Server -Filter "LogFileName = '$LogFileName'" -ErrorAction SilentlyContinue -ErrorVariable $ResultError
If ($ResultError)
Write-Host "ERROR: unable to event logs from $Server."
} Else {
Write-Host "Backing $Server."
$EventLog.backupeventlog("$OutputFolder\$Server.evtx")

After spending some more time troubleshooting this and doing some more research I found the link below. I found it strange the hoops the author went through to handle event logs on remote systems until I realized that the path for "backupeventlog"
is relative to the remote system, not the system running the script. So I checked the other systems and found that the event log backups had been created. This would explain the returnvalue of 80. What's worse is that the path for "backupeventlog"
can't be a UNC -- I tried, it didn't work.
Back Up Your Event Logs with a Windows PowerShell Script
https://technet.microsoft.com/en-ca/magazine/2009.07.heyscriptingguy.aspx
I decided to re-read Microsoft's documentation and found the magical text that I had over-looked:
BackupEventlog method of the Win32_NTEventlogFile class
https://msdn.microsoft.com/en-us/library/aa384808(v=vs.85).aspx
In addition, you must make backups to the local computer; you cannot save a backup of the event logs on Computer A to Computer B. Backups are implemented by using the LocalSystem account, which does not have the network credentials necessary to access remote
computers. If you want to save backups to a central repository, modify the script to first perform the backup, and then move the backup file to the central repository.
jrv:
I would mark your post of Wednesday, March 04, 2015 9:45 PM as helpful if this option were available. Your comment got me to dig into this deeper and discover
the root cause.
Thanks.

The auto-brightness of my iPhone is not working, and my system is really unstable. What is Apple going to do about those bugs?

I would like to know when Apple will fix these terrible bugs of the last software updates. My phone isn't working properly. I'm considering the idea of getting another smartphone...

If your system is unstable, you should consider restoring your device through itunes to get a fresh version of the operating system.
If your auto-brightness isn't working, it's possible that there is an issue with your phone's ambient light sensor which is hardware and not affected by an iOS update
Are you using a case? if so, it's possible that you're using one that was made for an iPhone 4 instead of a 4S which has an ambient light sensor that is a few millimeters to the left, so some iPhone 4 cases could cover it slightly, causing the ambient light sensor to not work as affectively

F4 is not working in my system.

Similar Messages

Maybe you are looking for