F5 brings me a whole set of unwanted tabs and all I want is refresh.

I have set Firefox to open a few home page tabs on startup. When I go to refresh any one of those pages I get whole other set of the tabs open, and the page itself does not refresh.
I cleared the cache. Still happens.
I uninstalled ALL plugins and re-cleared cache - same.
I uninstalled Firefox, deleted the folder it installs into and reinstalled FF10. Same!
I started Firefox in safe mode. Same.
This had been happening in FF9 and now FF10.
I'm an experienced user but out of ideas.

From the menu bar select View-Headers-Normal instead of All.
No menu bar? Press the alt key.

Similar Messages

When I forward and email a whole set of Unwanted codes, names addreses etc shows up under the original name

When I forward a message, all the stuff below shows up--- I don't want it there....how do I make it go away--thanks, RRies
-------- Forwarded Message --------
Received: via tmail-2007f.22 (invoked by user rries) for rries; Mon, 20 Apr 2015 10:49:12 -0700 (PDT)
Received: from mxe28.s.uw.edu (mxe28.s.uw.edu [140.142.32.172]) by cg33.u.washington.edu (8.14.4+UW14.03/8.14.4+UW15.02) with ESMTP id t3KHnBKQ007663 for <[email protected]>; Mon, 20 Apr 2015 10:49:11 -0700
Received: from o1.mail.lingscars.com (o1.mail.lingscars.com [198.37.148.68]) by mxe28.s.uw.edu (8.14.4+UW14.03/8.14.4+UW15.02) with ESMTP id t3KHn7eZ010112 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES128-GCM-SHA256 bits=128 verify=NO) for <[email protected]>; Mon, 20 Apr 2015 10:49:08 -0700
DKIM-Signature: v=1; a=rsa-sha1; c=relaxed; d=sendgrid.net; h=subject:from:to:mime-version:content-type; s=smtpapi; bh=oTm9iVExcbyI9RqCjBdDvM1rudI=; b=rd8Hk6ForQMBjaoS9C+F4CKz7amAc 4KUJINh/sH47trYHskkGsA7Q+MmkJ5dhFuPFC1u/SNxcRsgAa8L4GxuuEJNHWZBk dy2xh38wg6veONqlBCcC5LfJqRjLmZWsBonMPzBNf/CxsIz4f4Dex9kX9EtMQ1SF VYWiSo+WmSA03U=
Received: by filter-174.sjc1.sendgrid.net with SMTP id filter-174.11440.55353C12F 2015-04-20 17:49:06.986016946 +0000 UTC
Received: from [127.0.0.1] (localhost [104.200.19.77]) by ismtpd-067 (SG) with ESMTP id 14cd7f2a926.4e65.105d23 for <[email protected]>; Mon, 20 Apr 2015 17:49:06 +0000 (UTC)
Message-ID: <[email protected]>
Date: Mon, 20 Apr 2015 12:49:06 -0500
Subject: Dr. Ries / Telepsychiatry
From: Bo Claypool <[email protected]>
To: [email protected]
MIME-Version: 1.0
Content-Type: multipart/alternative; boundary="_=_swift_v4_1429552146_433ba0753bd26b60eddd714368989b8e_=_"
X-SG-EID: MwiF63ndBICLH9c9aBgcAMCj+jo/TuOLvSdO55kIv8HUoSMNIrHKkH10ESXAYx+O1yGOZZHIlwfjeM +oJlJ/W9oKIWoY8YbnVYPxNjAi+C3hGmn9gjVAESSPOuVsuw/VPPEU6xJJpFOzBDKU40UGwQ9jbJI3 G6nhea5kVAtu77I=
X-PMX-Version: 6.0.3.2322014, Antispam-Engine: 2.7.2.2107409, Antispam-Data: 2015.4.20.173924
X-PMX-Server: mxe28.s.uw.edu
X-Uwash-Spam: Gauge=IIIIIIII, Probability=8%, Report=' HTML_00_01 0.05, HTML_00_10 0.05, BODYTEXTP_SIZE_3000_LESS 0, BODY_ENDS_IN_URL 0, BODY_SIZE_1200_1299 0, BODY_SIZE_2000_LESS 0, BODY_SIZE_5000_LESS 0, BODY_SIZE_7000_LESS 0, BULK_EMAIL_SENDER 0, DATE_TZ_NA 0, DKIM_SIGNATURE 0, IP_HTTP_ADDR 0, MIME_TEXT_ONLY_MULTI 0, SMALL_BODY 0, SPF_PASS 0, SXL_IP_TFX_ESP 0, __ANY_URI 0, __CANPHARM_UNSUB_LINK 0, __CP_URI_IN_BODY 0, __CT 0, __CTYPE_HAS_BOUNDARY 0, __CTYPE_MULTIPART 0, __CTYPE_MULTIPART_ALT 0, __DQ_NEG_HEUR 0, __DQ_NEG_IP 0, __HAS_FROM 0, __HAS_MSGID 0, __MIME_TEXT_ONLY 0, __MIME_VERSION 0, __SANE_MSGID 0, __TO_MALFORMED_2 0, __TO_NO_NAME 0, __URI_NO_MAILTO 0, __URI_NS '
Dr. Ries -
I was wondering if you perhaps.......

From the menu bar select View-Headers-Normal instead of All.
No menu bar? Press the alt key.

HT5625 My setting icon is gone and all my contacts are gone and cant sign in to any mail and icloud what do i do?

Cant sign in to iCloud

Did you backup as part of the update?
You don't have them on your computer?
Have you checked what your sync setting in iTunes are?

HT201210 Hi......HELP WANTED....just trying to set up my iPad2 and all I keep getting in error 9 occured....tried following the rather confusing help section......no luck ! any simple answers welcome

Hi....can anyone offer help in setting up my ipad 2.......followed the minimal instructions which weren't much help and ended up with a message telling nm ethat my ipad needed to be restored, but everytime I try a message saying error 9 occured.
Tried the confusing Help section but can get no further.....

First, start by opening up Terminal.
Navigate to the Backups.backupdb folder: Type "cd " and drag and drop the folder onto the terminal window. Hit enter.
Type the following command: "sudo du -sch" and hit enter. Enter your admin password.
Wait for du to finish counting. It will prompt the actual size of the folder in GB, not counting hard links.
Get info on "Backups.backupdb" through Finder and compair the results. If the two sizes match, then you've lost the hard links during the first copy.

My MBA keeps opening unwanted tabs!

How do I stop safari and chrome from opening tons of unwanted tabs and ads? ALL THE TIME!!!!!!

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Also, if this has been happening since you downloaded Firefox, and you did not download Firefox from the Mozilla website, please uninstall Firefox and download a new copy at:
* https://www.mozilla.org/en-US/firefox/new/
Or if you need a different localization:
* https://www.mozilla.org/en-US/firefox/all/
Did this fix your problems? Please report back to us!

How to pass the whole set of values of a shuttle item in AJAX

Hi,
I am trying to pass the value of shuttle item to a dynamic process using Ajax. But if I use shuttle_right, I am able to get only the first selected value. If I simply give shuttle it returns null.
Please let me know How I can get the whole set of values separated by ':'
Thanks,
Vikas

Vikas,
Here's a little snippet that should get you going:
var shtVals = '';
var shuttle = new dhtml_ShuttleObject("PXX_SHUTTLE_LEFT","PXX_SHUTTLE_RIGHT");
for (x=0; x<shuttle.Op1Init.length; x++) {
shtVals += shuttle.Op1Init[x].value + ':'; //Op1 = left & Op2 = right
shtVals = shtVals.replace(/:$/,'');
alert(shtVals);Regards,
Dan

Is Apple providing any karaoke service such as selling karaoke software, whole set of karaoke hardware or even karaoke store? If yes, please give me information on this; If no, let me know if there are similar karaoke services providing in the future.

Is Apple providing any karaoke service such as selling karaoke software, whole set of karaoke hardware or even karaoke store? If yes, please give me information on this; If no, let me know if there are similar karaoke services providing in the future.

No, Apple does not. What other companies might provide what you're looking for I don't know. Try searching the web for "karaoke software" or something similar.
Regards.

Select from all_tables inside a procedure brings a different result set

Hi all,
There are two cases.. both are the same, but gives different out put.
CASE 1 pulls few for SYS and all for current user.
CASE 2 Pulls data for ALL USERS.
Why the same code in side a procedure brings a different result ?
SQL>
--CASE 1
CREATE OR REPLACE procedure test_t_owner as
cursor cur1 is select table_name,owner from all_Tables;
begin
for rec1 in cur1
loop
dbms_output.put_line(rec1.table_name||'--'||rec1.owner);
end loop;
end;
set serveroutpu on;
exec test_t_owner
--CASE 2
Declare
cursor cur1 is select table_name,owner from all_Tables;
begin
for rec1 in cur1
loop
dbms_output.put_line(rec1.table_name||'--'||rec1.owner);
end loop;
end;
- regards
sk

i create one new user
create user test identified by test;
grant connect, select any table to test;
grant dba to test;according to you then i run the procedure test_t_owner it should be give error
and i case of AB it should return all rows from all_tables.
But give output same in but sames.
Regards
Singh

How can I bring back the default setting in photshop elements 4.0

HP Pavilion desktop M7240UK
Monitor HP vs19 LCD
Windows XP
Explorer 8
Service Pack 3
Photoshop Elements 4.0
Hi
How can I bring back the default setting in Photoshop elements 4.0
Thank You
York44

In the editor? Quit the editor , then restart it while holding down Ctrl+Alt+Shift. Keep holding the keys till you see a window asking if you want to delete the settings file. You do.

ECC6 on WIN2008 64bit Unicode whole set of memory recommendation

HI,
I'm searching for whole set of memory recommendation for ECC6 on win server 2008 64bit unicode database oracle. But I couldn't find it. If anyone know and got sap note on that maybe can share with me.
Also if someone got any information on memory recommendation for ECC6 on win2008 database MAXDB 7.6.
Thanks

> I'm searching for whole set of memory recommendation for ECC6 on win server 2008 64bit unicode database oracle. But I couldn't find it. If anyone know and got sap note on that maybe can share with me.
>
> Also if someone got any information on memory recommendation for ECC6 on win2008 database MAXDB 7.6.
The amount of memory needed is distinguished by
- number of users
- estimated size of the database
- wanted throughput
For that purpose you use the quicksizer (http://service.sap.com/quicksizer) together with your hardware vendor. The outcome is a number of SAPS. You hardware vendor will offer you a machine capable to handle your workload.
Markus

Why does iPhoto/Aperture keep deleting photo sets from my Flickr account or keep placing whole sets back into the Pending stage of uploading the photos. This is becoming very frustrating and extremely time consuming. Any help would be most welcome

Has anyone got any idea as to why Iphoto/aperture keeps deleteing my photo sets from my Flickr account without warning or reason given. Also when I enter my sets the program will revert all of the photos back to the Pending stage of the up oading process. One or two photos I could live with but some of my set are in excess of 1500 photos per set, and this becomes very very time consuming to re upload them. and whats more annoying on some occassions after spending 12 to 16 hours re uploading them I find that they have all been duplicated. Is there a Bug with Iphoto or Aperture????????
any help would be most welcome P Jefferys

I am using Iphoto version 9.5.1, and No I am not deleting any photo from any file. what happens is this :- I open up Iphoto and enter my flickr account via the shared folder icon on the left hand side of the screen this is when I get a pop up screen from Iphoto informing me that they have removed a SET of photos from my Flickr account (no reason given) when i go into that set all I can see is dashed empty square where the photo used to be. I will then get another pop up screen saying that Iphoto can no longer access my flickr account and will I permit a reconnection and allow Iphoto to access my flickr account (add pass words etc) when I get back into flickr the SETS have gone and all other photos enter the Pending stage again. After re uploading the missing photos I find that some 50% of them have been duplicated.
PJ

My homepage brings up an unwanted tab.Don't want the tab.I, going back to IP utill it is fixed.

my home page is ixquick.com and don't want nor use add ons .Only within the last month has this annoying tab been appearing requiring an additional keystrock every time I enter foxfire.

This issue can be caused by the MySearchDial extension.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check if you have a user.js file in the profile folder to initialize prefs each time Firefox starts.
The user.js file is only present if you or other software has created this file and normally it wouldn't be there.
You can check its content with a plain text editor (right-click: Open with) if you didn't create this file yourself.
The user.js file is read each time Firefox is started and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
*http://kb.mozillazine.org/Preferences_not_saved
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Director: Show Folder (Linux: Open Director; Mac: Show in Finder)

How to set a New Tab as the start page in Firefox and lock in my choice of web sites

You may set the New Tab page Firefox shows when opening a new tab as its start page, and you can lock in the web sites you want displayed there.
I set my browser to open a New Tab as its start page and have locked in six destinations from which to choose on my start page.
First I open Firefox and open a new tab. Then I delete any open tabs other than this New Tab. Optionally, I can also set a second tab to open to a specific web site
Next I go to Tools and Options (or Edit and Preferences in Linux) and select the General tab on the far left. Click on
[Use Current Pages].
Each time I open Firefox it will open showing me the New Tab.
I can select from pages that I have already visited the six pages I want to have appearing on my New Tab every time. Supposing there are no pages locked in yet, and I don't want the site in the top left. I hit the X in its thumbnail's top right corner, it disappears and every other site thumbnail moves up and there is a new site appearing in the sixth slot. Note that if I have visited one page frequently, it may appear more than once, or be replaced by itself. If that happens, just keep deleting until the page you want shows up.
If I find a site that I want to save, then there is a thumbtack in the top left corner of the thumbnail. It is black, but if I click it it turns blue, and the thumbnail is a keeper.
This web site is in the second row, second over, but I want it to be up on the top row. Just drag and drop and the two sites exchange places. Make sure it has a blue thumbtack. The lock-down thumbtacks and delete X symbols appear in the top left and top right, respectively while the mouse is hovering over them.
It is possible to delete a saved site, and it is possible to undo the thumbtack. Simply click the X to delete or click the blue thumbtack to unlock the site and turn the thumbtack black.
You may choose to tack down a few sites and let the remainder float in and out, driven by your browsing history.
Through my use of this approach, I have instant access to my club's web site, two Webmail sites, and some other often-visited places on the Web, all in one start page.
About the only thing I really don't need there is a Google search box, for if I enter my search terms in the address bar I get the same result as if I had specifically typed in the search box.
Some add-ons, often potentially unwanted programs (PUPs), will replace the Firefox about:newtab (address of the New Tab) with eBay, Facebook, Twitter icons among others, and a different search engine. These icons may have a nicer appearance than the default Firefox New Tab, but you may also be looking at extra, unnecessary work for the computer, especially if behind the pretty icons there is a hidden agenda.
Personally, I would stay clear of these add-ons, and perform some scanning with an up-to-date antivirus and antimalware software.

If this is not a pinned (App) tab then the home page should open in that tab.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Setting up RAID 0 and scratch disk from blank drives?

Folks,
Howdy again from NC. I've been setting up an AMD Phenom II 955 to handle PPro CS5 as well as possible, within limits. I built four of these machines for my math class, and am going to give CS5 a go on one of them before caving in and migrating my Production Premium to an i7/X58 platform. Maybe I'll get lucky and find this computer works acceptably with PPro, especially if I transcode my T2i AVCHD footage (likely Neoscene).
I put three new disks into my build yesterday and would like some pointers on setting them up, if I may ask. I have read through a number of posts on this, but don't find direct answers, unfortunately. I've never set up a RAID and want to get it right.
I have two Caviar Black drives for my RAID and a Hitachi Deskstar for my scratch disk. The Blacks are new out of the pack and the Hitachi has had zeros written to the drive. How to begin?
Anticipated issues:
* Do I need to format the drives in a certain way? I had planned on going into Disk Management and setting up a volume on each as my first move. Right now, they aren't even recognized under My Computer. Under Disk Management, all three show as unallocated.
From memory, I right click in the unallocated space and select an option for setting up the volume. Prior to this I only used straight-up drives, no RAID, and after writing zeros to a drive selected "New Simple Volume". It seems to me this is the move to make on the single scratch disk.
But how about the two RAIDed drives? We also have options to set up as "New Striped Volume" or "New Spanned Volume". If the answer is to set as as "New Striped Volume" for the RAID 0 I have planned, do I do this before or after installing the RAID software?
* My documentation for setting up the RAID on my motherboard doesn't indicate when to change my BIOS setting for the two SATA channels from IDE to RAID. Should I do this before or after running the software to set up the RAID? Do I need to go into the software setup with the two SATA channels already configured as RAID?
Right now, all SATA channels are configured as IDE.
* After getting my disks set up, I'd like to optimize my system for editing (turning off unwanted features, etc.). I've been looking all over for a link to an outside site I had bookmarked from a prior post, but lost it on re-install. Anyone recall what the favored link was? It started as a long page of instructions in simple typeface.
In the end, my disks are as follows (unless someone makes a case to use them differently):
OS/Programs - 1TB Caviar Green. Yes, I know the deal on green drives, but I needed to use this drive somewhere. I figured using it as the OS drive would be the best spot for the slowest drive. Maybe I botched this and should have used the following drive for the OS? I had transfer rates in mind and thought the Scratch drive should be faster?
Scratch - 750GB Deskstar 7K100 series. This drive was tops 18 months back when I bought it.
RAID 0 - Two 640GB Caviar Blacks (32 meg cache, twin processors). A bit older in the Black lineup, but the drive charts show them working quickly.
To ask one dumb last question, which will really show my newbieness, I use the scratch drive for page files (right? and what else?) and the RAID for holding any media to be worked upon and for encoding the final project?
I've been reading on this forum for over a month and am amazed that as I have the drives for a RAID, I can't find good links to tell me what to do. I know I am asking redundant questions here but have already spent two hours with the search engine and am only getting tangential anwers (ha! math joke).
Sorry to be asking such newbie questions all over again, but my luck with the search engine hasn't been so good of late. Maybe Bill's idea of creating a sticky section for common questions is a good idea.

about 75-80% of the systems we ship, ship with this config (others would be bigger arrays or no array)
1)OS
2) project drive 2 x raid 0
3) render to/export drive 2 x raid 0
4) back up (pick your poison)
while i cant speak to the older WDs (we have not used them for 3-4 yrs until now)
i can tell you with Seagate and now WD we have not seen the issue that applies to this inRaid 0
we are aware of the timeout issue this happens with controller cards and seagate or WD with large raid 5/6
simple answer use enterprise drives for raid 5/6
if you look at all the external raid resellers Sonnet etc they all use enterprise drives (mostly seagate)
so do we for large raids.
(drobo does not so buyer beware (green), we like to sell drobo without drives in it and use ours)
again BACK UP do not assume your raid 3/5/6/10/1 whatever is bullet proof, trust me its not
so even if you have a loss it should be at best nominal
something i dont think i have seen mentioned enough either
the single most common cause of drive failure (or any component failure) is Dirty Power!
dirty power can be spikes but are usually brown outs (very common in large older cities) or even low voltage coming into the home/office
this is the most common.
rather than a clean 120v you could see it as low as 105v
the other is being on a circuit with a large appliance.
ever see your lilghts flicker when the AC kicks on?
buy a good inline filter UPS. add 20% MORE wattage than your power supply
dont forget to add accessories LCDs, Audio interfaces, speakers/studio monitors etc.
Scott
ADK

Imac freezes since mountain lion upgrade, i set to never sleep and then it is ok. any ideas what is going on?

This may be the same issue as some other discussions but I have a few different circumstances. I upgraded to Mountain Lion a few weeks ago and all seemed to be ok. Then I got an upgrade notice for Itunes last week and installed the update. Since then My mac started freezing after coming out of sleep mode. The mouse was active but when i selected programs from the dock the icons would just bounce and nothing would open.The only way to revive it was to do a restart with the power button. Then the system would be fine until it went into sleep mode .After reading through several disussions it seems many people are having similar issues with very few fixes to the problem. I am not very savvy on mac O/S so I am in the dark as to where to begin to troubleshoot this problem. Since the freeze ups always occur after coming out of sleep mode I set my computer to never sleep which has worked to stop the freezing but I am not sure how good it is for my system to be running all the time. I would appreciate any input on this problem. My Imac is a 2008 intel with 3 gig ram

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

F5 brings me a whole set of unwanted tabs and all I want is refresh.

Similar Messages

Maybe you are looking for