Face time will not connect error message "Please check network conections and Try again" message appears but I'm connected to the internet?

Face time will not connect error message "Please check network conections and Try again" message appears but I'm connected to the internet?

Hey sergioo9,
Thanks for the question. Based on what you stated, it seems like you are having trouble signing into Messages on OSX. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
FaceTime, Game Center, Messages: Troubleshooting sign in issues - Apple Support
Thanks for using Apple Support Communities.
Cheers,
Mario

Similar Messages

  • Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download.  Please check network settings and try again later.

    Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download.  Please check network settings and try again later, however there was no problem updating my iPhone to iOS 5 through iTunes connceted to my dell laptop on the same wireless network.  What gives?

    Try disabling your firewall; both on your PC and the external Firewall/Router.

  • "USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

    Hi,
    I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past.  Thank you board members! 
    Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago.  There have been no changes (I know of) to the configuration, but now I receive  "The connection between your device and the desktop could not be established.  Please check your setup and try again."  On the laptop I sometimes get  "USB device not recognized."  I am unclear why I get the PC message sometimes and not others.   
    I have tried the following: (not necc exactly in this order)
    Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
    Reset the Palm (multiple times)
    Rebooted the laptop  (multiple times before and after the Palm resets)
    Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
    and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409) 
    Followed the steps in "Start Here" found at  http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057 
    Moved Backup directory as per a post on this forum
    Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
    Followed the steps in HotSync troubleshooter guide you can run through located on
    http://kb.palm.com
    Went into Device Manager - found it shows no yellow ! 's
    Followed Device Mgr Troubleshooter - went all the way thru with no solution 
    Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue.    ...? 
    Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
    Read all the posts under "USB device not recognized." 
    OK, I'm at a loss, can anyone help me?  Many thanks in advance! 
    ~Bob
    Post relates to: Tungsten E2

    Hello!
    Using a cradle with the Tungsten E2?  Tried bypassing the cradle and just use the hotsync cable?  Tried a different computer yet?  Somehow, the PC is having problems getting a signal from the device.  I assume you have the laptop charger plugged into the laptop during this?  Not going through a docking station or port-replicator.
    One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop.  This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time.  Keep me posted.
    Post relates to: Treo 650 (Unlocked GSM)

  • IMessage on ML - "Could not sign into iMessage. Please check network settings and try again"

    i came across an issue when signing into iMessage with an Apple ID on Mac.
    i had been experiencing the "Could not sign into iMessage. Please check network setting and try again" error for iMessage issue since installing Mountain Lion. i finally solved my problem after talking to the Apple Tech Support team.
    Here's the steps:
    1. Shut down laptop.
    2. Switch on laptop again. immediately hold down the left "SHIFT" key until u get into the log in screen. By doing this, ur laptop will be in "Safe Boot" mode.
    3. Sign into iMessage using Apple ID. (i was able to sign into iMessage for the first time on my Mac since getting ML)
    4. Shut down laptop again.
    5. This time switch laptop on normally.
    6. You should be able to use iMessage normally.
    in addition, make sure the boxes for date & time and timezone are ticked to be set automatically.
    Hope this is helpful for users experiencing the same issue i had. it did for me!
    Cheers

    Okay,
    let me add my story to this thread.
    Brand spanking MBA, Mountain Lion.......logged into Imessage 1st thing, no prob.
    Then, after a few weeks; in the middle of a chat....the name of the other person turned red and my sent messages received a red dot as they were not sent. I checked with the other person.
    I couldn`t recieive any messages either, not from any contact.
    I logged out, and I couldn`t log in anymore.
    I get a yellow triangle saying something like "error while logging in, try again later".
    I tried again and again later........
    I seeked help on this forum and a user helped me initially.
    I re-installed the whole Mountain Lion, a process that I don`t care to repeat too often.
    That fixed it for a while, but yesterday the same thing happened.
    In the middle of a chat....the red name, the red dots......well, you get the picture.
    I tried, to no avail:
    # to log in after reseting the PRAM
    # boot up and log in whilst in SAVE mode. It will NOT log in, same problem
    # to log in after deleting all Imessages and Facetime files in Library/Preferences
    # to log in with my wife`s Apple ID, or any ID really.
    What did work was logging in with my ID on my wife`s Ipad, no worries.
    My account is Yahoo, and don`t seem to be the problem.
    Please, any suggestions welcome.
    I have urged Apple politley to give us a fix at:
    http://www.apple.com/feedback/
    Thanks,
    MXP 150 Patriot

  • Trying to Hot Sync Visor Pro with Windows 7 (64 bit OS) - getting error: "The connection between your handheld computer and the destktop could not be establishe​d. Please check your setup and try again."

    Hi.
    I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
    I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
    Steps I have taken:
    * installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
    * The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established.  Please check your setup and try again."
    Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
    I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?). 
    Then how about the Infrared option?  I see on the PDA it has a red area that one can "beam" info.  Is this the same as Infrared or my 2nd option?
    I love my Visor and want to continue using it, but need to backup the valuable info!
    Any help with this would be greatly appreciated!
    THANKS!!!!!
    Post relates to: Visor Pro

    Hello lwalbring and welcome to the Palm forums.
    Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option.  Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
    Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico.  This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2.  Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2.  The software is free and the link is all the way at the bottom of the screen.
    Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter.  Some laptops still have IR ports and most desktops don't.
    Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
    Alan G

  • When i want to ask the guaranty status of my apple wireless keyboard, i got an error: apple keyboard We're sorry, but this serial number is not valid. Please check your information and try again.

    When i want to ask the guaranty status of my apple wireless keyboard, i got an error: apple keyboard We're sorry, but this serial number is not valid. Please check your information and try again.

    If you purchased the iPhone from Apple or an authorized Apple reseller,
    contact them for assistance. If you purchased elsewhere, go back
    to that retailer and get them to give you a new iPhone or your money
    back.
    If you have checked the serial number carefully and re-entered it
    and that gave you the same error message, contact Apple if purchased
    from Apple or authorized retailer; otherwise you have been scammed
    and need to pursue the matter with the business you obtained the
    iPhone from.

  • I'm trying to update to CC (2014) and keep getting this message: "Installation Failed. Installation encountered an error. Please restart your system and try again. (15) I've done the restart, same problem.

    I'm trying to update to CC (2014) and keep getting this message: "Installation Failed. Installation encountered an error. Please restart your system and try again. (15) I've done the restart, same problem.
    Help!

    Hi stijill2,
    In case you are facing issues uninstalling the app's then please try manual cleanup of Adobe from your machine by following the below mentioned steps:
    1. Navigate to Applications and trash all Adobe app's and Adobe folder.
    2. Navigate to Applications/Utilities/ and trash Adobe Application Manager,Adobe Creative Cloud, Adobe Installer folder.
    3. Go to Library/Application Support and trash Adobe.
    4.Go to ~/Library/Application Support and trash Adobe.
    Try installing the CC app's and let us know if still the error persists.
    Regards,
    Romit Sinha

  • Your address was not recognized. Please check your entry and try again.

    I'm trying to register for the free 30 day trial.
    I get
    "Your address was not recognized. Please check your entry and try again."
    My address works fine for the postman, deliveries etc. Another case of a programmer who knows better!
    What are the address requirements on the sign-up form, so I can proceed?
    Pete

    Hi
    Which product do you want to register for? Office 365, SharePoint or Office 2013?
    Since this forum is to discuss problems of Office development such as VBA, VSTO, Apps for Office, and your question is related to the free trial registering of Microsoft products, I suggest you posting it in Answers
    Forum for more efficient responses.
    Thanks.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Unable to reach Adobe servers, Please check firewall settings and try again

    I have been a creative cloud customer since it started and I've never experienced such buggy software as the app manager. The customer experience is just shocking and I wish Adobe would just offer direct downloads for the software we need rather than use the app manager.
    I'm currently trying to install the latest versions of the programs but the app manager keeps showing "Unable to reach Adobe servers, Please check firewall settings and try again in a few minutes".
    I do not have any firewalls on my network.
    I've uninstalled all previous versions of the applications.
    The app manager will download a few % and then the message appears again. I click retry and it downloads another few % before showing the message again. I keep doing this until the program is fully downloaded and installed which take hours. Because I am able to eventually download the app, the error should be anything to do with my setup or internet connection as I've never had this issue before when installing adobe products.
    Is there a way we can bypass the app manager and install the programs directly? This is getting very annoying and I just need my apps to install without wasting days clicking the retry button.

    I'm having the exact same problem. Photoshop is stuck at 0%.
    Have the links for direct download changed? When I went to  http://prodesigntools.com/adobe-cc-direct-download-links.htmland then scrolled down the page to:
    Photoshop CC 2014 (64-bit)
    740 MB
    File 2
    801 MB
    File 1
    and then clicked on File 1 and File 2, I reached a page that says "You don't have permission to access "http://trials3.adobe.com/AdobeProducts/PHSP/15/win64/Photoshop_15_LS20_win64.7z?" on this server."

  • Re: "USB device not recognized​." "The connection between your device and the desktop could not be establishe​d. Please check your setup and try again." Tungsten E2

    Have had my Tungsten E2 for 3 years...I always use cable to Hotsync, and the last few weeks it has worked only intermittently. Either the device is not recognized, or it starts the HotSync and then freezes.  I have checked out various online suggestions but then discovered that the only thing that seems to  work is to exit Hot Sync Manager, then restart it again each time - then Hot Sync seems to work fine - a temporary solution! I don't have Bluetooth capabilities.  I can't figure out if I need a new cable, a new OS (have Vista), a new laptop (only 2 years old) or a new Palm!  Any suggestions? Thanks!
    Post relates to: Tungsten E2

    Hello!
    The next time that happens, USB device not recognized error, unplug the cable from the PDA and pc, then soft reset the device, then plug the PDA back in and see wat happens. 
    Post relates to: Treo 650 (Unlocked GSM)

  • Id CC 2014 Installation error. Please restart your system and try again. error 15, Tried several times, couldn't fix it

    Grateful for help

    Link for Download & Install & Setup & Activation problems may help
    -Online Chat http://www.adobe.com/support/download-install/supportinfo/

  • Error Occured. Please check your settings and try again while opening a RTF

    Hi,
    I'm having the above error while opening a template in MS-Word to create BIP Reports. I see a lot of messages on the BIP forum with similar error. Could anyone over there help on this issue please.
    Thanks
    Aravind

    Can you throw in more detail? I mean exact step step by process that you folowed.
    Thanks, Naveen Gagadam.

  • I'm trying to download Dreamweaver CC 2014 Trial and it keeps saying this 'Installation encountered an error. Please restart your system and try again'

    Any ideas on what to do, I have restarted my laptop several times. Your help would be greatly appreciated, Jay

    Hi Mylenium,
    My laptop is an Acer Aspire Ethos 8943G with an:
    -Intel Core i7 1.6ghz QUAD Core 8 Threads
    -16GB DR3 1333mhz Ram
    -120GB Kingson V300 SSD Hard Drive
    -750GB Storage Hard Drive
    -AMD 5850 1GB Dedicated Graphics card with upto 4GB Shared Memory
    Is there any other information you require?
    Jay

  • Face time will not connect when calling on macbook pro

    my face time will not connect to ppl when calling or when accepting a call
    what can I do to fix this
    my internet connection is good

    Hello e2011,
    I'm sorry to hear you are having issues with your iPhone. If your iPhone isn't being recognized in iTunes on your MacBook Pro, you may find the info and troubleshooting steps outlined in the following article helpful:
    If you don't see your connected device in iTunes for Mac - Apple Support
    Regards,
    - Brenden

  • Face time will not let me sign in with my new password

    face time will not let me sign in with my new password?

    Same thing for me.  I'm getting an error message that states "The server encountered an error processing registration. Please try again later."  I've been trying for the last two hours, off and on, and keep getting the message.  I've re-started FaceTime as well as re-strated my MacBook.  This is just after changing my AppleID password - both iTunes and my Apple account are fine with signing in using the new password.

Maybe you are looking for