Faces do not properly line up with actual faces in 3.5

In 3.5...When trying to detect faces, Aperture now places the frames in some random location (usually not on a face) within the photo.  Only occurred since upgrading to 3.5.  In only 5% of the photos, did the software correcltly place the frames.  Needs to be fixed.

EricP wrote:
In my experience this only happens with photos in portrait orientation. Landscape orientation photos are fine.
This wasn't an issue with Aperture 3, just Aperture 3.5.  Odd that things would get worse with the new release.  It also significantly increases the amount of time spent tagging photos, since I'm not sure if it's actually putting the face on the right place or if it tagged an elbow or shirt pattern, so I have to delete what Aperture says is the face and re-create the face box and tag it.

Similar Messages

  • Calendar is not properly sync'ed with Exchange server

    Product: iPhone 5s with ios 8.0.2
    Some of my calendar entries are missing and I have been missing a lot of important meetings as I depend on my phone a lot when I don't have my laptop with me. It was ok until iOS 8.0.2 came into the picture.

    Any update or response from Apple?
    Similar issue post upgrade 8.2 (12D508) ATT carrier
    E-mail synchronizes fine between Outlook on the PC, and her iPhone and iPad.  If I enter a meeting on the calendar on my desktop Outlook, it will not show up on iPhone or iPad; only appointments that show up are those with invites that are accepted on phone or ipad? .
    I have gone thru a similar scenario  / list as noted in original email

  • I bought a HEX watch band for my Nano, if I install the Nano to line up with the buttons the face of nano is not in the proper direction. Can I rotate the face of the Nano?

    Can I rotate the face of this new Nano to line up with the HEX watch band that I bought at the Apple Store?

    yes put two fingers on the screen and rotate in the direction you want it to be

  • Receipt Qty in AP invoice does not match with actual receipt qty.

    Hello everyone,
    I am facing an issue in oracle Payables module. When we match invoice with receipt while preparing invoices, Quantity received shown in the Receipt quantity block in invoice window does not match with actual receipt quantity of that item. Due to this difference user is not able to book the invoice. Please help me to resolve this issue.
    Thanks,
    Himanshu Gupta

    Exactly. What i mean is in the invoice window, There is a block called reciept quantity shown in the lower part. The received quantity displayed in that block is more the actual quantity being recieved. (when we see the recieving transactions). is this a bug?
    thanks for your reply, awaiting your response......
    Himanshu Gupta

  • On the moment that I connect the Iphone 5 on Windows 8, it is not recognized by Itunes, but actually it appears as a usual USB cable, or as a camera. And then I can't synchronize the Iphone 5 with Itunes. So, what do i do?

    On the moment that I connect the Iphone 5 on Windows 8, it is not recognized by Itunes, but actually it appears as a usual USB cable, or as a camera. And then I can't synchronize the Iphone 5 with Itunes. So, what do i do?

    Hi pedro109,
    If your iPhone is recognized by the computer, but not seen by iTunes, you may need to restart the Apple Mobile Device Service, as described in this article -
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    Once iTunes recognizes the iPhone you should be able to sync it with iTunes. See this article
    iTunes 11 for Windows: Sync contacts, calendars, and other info with iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12317
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • I have v10.8.2 os on my mac. i use an external drive for backup which is on whenever the mac is on. whenever the mac wakes up i get the reminder that the drive was not properly ejected. i did not have this issue with snow leopard?

    since i have upgraded to mountain lion i get a popup whenever my system wakes up telling me that my external drive was not ejected properly. i did not have this issue with snowleopard. i leave my hard drive on and connected for use with time machine.

    Message was edited by: leroydouglas
    better yet, try this solution:
    https://discussions.apple.com/message/12351186#12351186

  • I have a 1TB WD external hard disk, which suddenly cannot be detected in my system. When i connect the hardisk to the macbook, the disk appears and immediately disconnects with the message "Disk not properly ejected". Any advice ?

    I have a 1TB WD external hard disk, which suddenly cannot be detected in my system. When i connect the hardisk to the macbook, the disk appears and immediately disconnects with the message "Disk not properly ejected". Any advice ?

    verify on another Mac if the same
    WD is having issues with mavericks as you can see on the WD forum, did you install any WD software (never do that) when you connected the drive for the first time?
    possible issue is a dead SATA bridge card or the new WD firmware w/ Mavericks.
    SATA card issue
    Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
    http://community.wd.com/t5/External-Drives-for-Mac/bd-p/passport_mac
    verify on another Mac if all possible

  • HT4623 I have an IPhone4 and is updated with version 6.1.3 and I am not able to connect with face time calls. I have checked the date ant time. I used to be able to use face time with no problem. since the late os upgrace I have not been able to connect w

    I have an IPhone4 and is updated with version 6.1.3 and I am not able to connect with face time calls. I have checked the date ant time. I used to be able to use face time with no problem. Since the late os upgrace I have not been able to connect with face time.

    Read http://support.apple.com/kb/ts3367

  • PO Release Strategy not changed after deletion of few line items with less

    Subject : PO Release Strategy not changed after deletion of few line items with less Total PO
    Dear Friends
    We have issue with PO Release strategy. We have created the PO. with release strategy  with multiple approvers.  After approval of first approval manager , one of the PO line item got deleted and Total PO value is reduced . The new PO value should have changed the PO release strategy. But it is not changed. Old release strategy only showing in the PO which is wrong. 
    Details of the PO
    PO no 4500000123 with 5 line items Total PO value : 100,000 USD Release strategy : AB
    PO line item 5 deleted. Now total PO value changed to 50,000 USD and the PO release strategy should have been changed to AA but not changed. Still showing PO release strategy AB only.
    Are there any OSS notes available to correct his bug.
    Please let me know if you need more details
    Thanks in Advance
    Thanks
    MVS

    Hi,
    release indicators  change it to 4.It may works. Please explore to all 6 indicators..........
    i.e,
    1-cannot be changed
    2-changable,no new determination of strategy
    3-changable,new release in case of strategy
    4-changable,new release in case of strategy or value change
    5-changable,new release if new strategy/outputted
    6-changable,new release if new strategy or value changed/ outputted......
    And check   Characteristic description and value in Classification  of Release strategies ........
    I hope this will help you. Thanking you.
    Regards,
    Venkat.

  • The  vendor code is not coming against some Assignment line items with the

    Hi All,
    While executing  t.code FBL3N,the  vendor code is not coming against some Assignment line items with the GL A/C4607000, some line items it is coming.
    The GL A/c 4607000 is GR/IR clearing a/c.
    Please let us know  why this situation is happeing at the time of FBL3N.
    Thanks
    Ram

    HI,
    By activating the special fields you can the vendor number, but use the new reprot called "FAGLL03 - Display/Change Items (New) ".
    First go to SPRO> Financial Accounting (New)> General Ledger Accounting (New)--> Master Data > G/L Accounts>Line Items --> Define Special Fields for Line Item Display
    Click on New Entries -
    Table - BSEG - Field - LIFNR
    Save. Now execute the report - FAGLL03 - Display/Change Items (New)
    Give the gl account number and execute.
    After getting the line items list from menu select --Settings --> Special Fields --> Click on New Entries --> Enter Table BSEG, Field Name LIFNR.
    After this come back and execute again. It will give you the vendor number.
    Thanks & Regards,
    Shashi Kanth.

  • Software necessary to communicate with Ipod not properly installed

    Hi,
    I updated my Itunes software and have been having problems ever since. Every time I connect my Ipod I get the message: "Software necessary to communicate with Ipod not properly installed. Reinstall Itunes..." After I click Ok it goes to Itunes but it does not recognized the Ipod. Now I have reinstalled several times and even downgraded to a previous Itunes version but keep getting the same error. Even though I don't know if this has anything to do with it, yesterday I noticed that I cannot watch any YouTube videos either, i get the error: "Hello, you either have JavaScript turned off or an old version of Adobe's Flash Player. Get the latest Flash player" Any help would be highly appreciated!

    A lot of users are getting this. See 'can not open iTunes' obove this in the forum

  • Cannot get Membership Provider with name RoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.

    I am trying to create a web application that uses AD LDS as its authentication provider. I have followed all the steps and verified all the web.config files, but I receive the error below:
    Cannot get Membership Provider with name CustomRoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.
    Has anyone come across this error before?

    There seems to be some issues in your web.config files. Please make sure your Web application entries for membership and role provider(at central admin site) are matching with Web.config entries. your error
    "Cannot get Membership Provider with name CustomRoleProvider.
    ", indicating that you may have used role provider name in Membership provider text box or in web.config.
    Also please make sure that you have correct entries in all 3 web.config files - Central Administration , Security Token Service (STS), Web application .
    Please refer  -
    Forms Based Authentication (FBA) in SharePoint 2013
    Thanks
    Ganesh Jat [My Blog |
    LinkedIn | Twitter ]
    Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

  • UNPLANNED DELIVERY COST NOT PROPERLY DISTRIBUTED TO MATERIAL LINE ITEM

    Hi ,
    Presently my system is Configured to distribute  Unplanned Delivery Costs among invoice items,but it is not properly distributed among line item while doing the posting.
    What may be the problem,Is there any additional settings to be checked ?or in which areas i need to check? Plz Help regarding this.
    Thanks,
    Raju

    Hi,
    Plz chek the SPRO settings for unplanned delivery cost. You need to maintain the company code
    in SPRO - Material Management - Logistics Invoice Verification -Incoming invoices - Configure How Unplanned Delivery Costs Are Posted
    regards

  • Totals in BEx query not matching with actual total

    Hi,
    We have one report in BI, the total for few columns (Given by BI system i.e system generated) for the values of the key figures is not matching with actual total of that values...
    I am confused to see, how sap BI can do the totaling mistake...
    Please suggest and help....
    Thanks,
    Nitika

    Hi
    Please check following things
    1. Check key figure aggregation properties, how it is defined, it might have been defined as Avg, Last,first value or it might using exceptional aggregates.
    2. Double check your process of validation between cube and bex report for totals.
    Thanks
    Raghu.

  • SQL Command not properly ended at line 13

    Dear All,
    I have a below code to find a value from database. but when iam running this code it is throwing error "SQL Command not properly ended at line 13"
    iam unable to find the error.
    Pls help me.
    DECLARE
    match_count INTEGER;
    -- Type the owner/schema of the tables you are looking at
    v_owner VARCHAR2(255) :='SCOTT';
    -- Type the data type you are look at (in CAPITAL)
    -- VARCHAR2, NUMBER, etc.
    v_data_type VARCHAR2(255) :='VARCHAR2';
    -- Type the string you are looking at
    v_search_string VARCHAR2(255) :='KING';
    BEGIN
    FOR t IN (SELECT table_name, column_name FROM all_tab_cols where owner=v_owner and data_type = v_data_type)
    LOOP
    EXECUTE IMMEDIATE
    'SELECT COUNT(*) FROM '||v_owner||'.'||t.table_name||' WHERE '||t.column_name||' = :1'
    INTO match_count
    USING v_search_string;
    IF match_count > 0 THEN
    dbms_output.put_line( t.table_name ||' '||t.column_name||' '||match_count );
    END IF;
    END LOOP;
    END;
    Thanx..

    DECLARE
       match_count       INTEGER;
    -- Type the owner/schema of the tables you are looking at
       v_owner           VARCHAR2 (255) := 'SCOTT';
    -- Type the data type you are look at (in CAPITAL)
    -- VARCHAR2, NUMBER, etc.
       v_data_type       VARCHAR2 (255) := 'VARCHAR2';
    -- Type the string you are looking at
       v_search_string   VARCHAR2 (255) := 'KING';
    BEGIN
       FOR t IN (SELECT table_name, column_name
                   FROM all_tab_cols
                  WHERE owner = v_owner AND data_type = v_data_type)
       LOOP
          EXECUTE IMMEDIATE    'SELECT COUNT(*) FROM '
                            || v_owner
                            || '.'
                            || t.table_name
                            || ' WHERE '
                            || t.column_name
                            || ' = :1'
                       INTO match_count
                      USING v_search_string;
          IF match_count > 0
          THEN
             DBMS_OUTPUT.put_line (   t.table_name
                                   || ' '
                                   || t.column_name
                                   || ' '
                                   || match_count
          END IF;
       END LOOP;
    END;Checked and no issues in Toad too...

Maybe you are looking for

  • How do I keep my settings when importing into a clean iTunes?

    I have multiple television shows saved to my HDD. I have gone through and added sorting information, dates, episode titles, episode numbers, dvd covers... everything that I would want to fill in under "Get Info". Now I have installed iTunes on a new

  • Security role with alias KeystoreAdministrator does not exist.

    i have a error trying to start  the java engine of a Solution Manager 4.0 SR2 on AIX with ibm jdk SR9 the next log is about the std_server0.out i do not how to create the alias because i can not connect using Visual Administrator because the server n

  • WRT 160N Games loosing network connections

    When I am playing MW2 and Socom Confrontation (on PS3) or any game I get a message, and go to the main screen saying No internet connection deteced you must have a active network connection to play this game.  I not only get this from online gameplay

  • Activity type origin text doesn't have been showed on Cost analysis report

    I have defined three acitivities TMAQ, TMO, CIF. But  the origin text column of these acitivities is not showing in cost Analysis report(althoug the origin is showed), i.e. when we go to an order & navigate to "Cost Analysis".  TCODE:CO02 (Production

  • Firefox perfomance

    about:buildconfig Compiler Version Compiler flags gcc gcc version 4.6.0 20110415 (prerelease) (GCC) -Wall -W -Wno-unused -Wpointer-arith -Wcast-align -W -fno-strict-aliasing -pthread -pipe -DNDEBUG -DTRIMMED -Os -freorder-blocks -fomit-frame-pointer


HashFlare