FaceTime add email address verification email didn't receive even after weeks

i added alternate Apple id email address and it doesn't send the verification email anywhere. Please advise.

Hi Himahere,
Take a look at the article linked below, it provides suggestions that’ll resolve most issues receiving Apple ID verification emails like the one you encountered after setting up FaceTime on your iPad.
If you didn't receive your Apple ID verification or reset email - Apple Support
Cheers,
-Jason

Similar Messages

  • If I have forgotten my security questions and am not given the option to send them to an alternate email address because I didn't have one set up at the time, how can I get passed this point? I'm sure I'm blocked out at this time from trying.

    I cannot remember my security questions and I am not given the option to send to an alternate email address because I didn't have one set up at the time.  How can I get past this point?

    See Here... ask to speak with the Account Security Team...
    Apple ID: Contacting Apple for help with Apple ID account security
    Or Here  >  Apple  Support  iTunes Store  Contact

  • Is this legit?             Confirm your email address  Dear Email Users,  As part of our security measures, we regularly screen activity in the E-mail system and after noticing an issue on your account password, we are requesting confirmation from you for

      Is this legit?
       Apple Support Team <applsupporteam @icloud.com>
           Confirm your email address
    Dear Email Users,
    As part of our security measures, we regularly screen activity in the E-mail system
    and after noticing an issue on your account password, we are requesting confirmation
    from you for the following reason:
    Our system requires further password verification.
    In accordance with E-mailUser Agreement, your account access will remain limited
    until the issue has been resolved. Unfortunately, if access to your account remains
    limited for an extended period of time, it may result in further limitations or
    eventual account closure.
    To verify your E-mail account, you must reply to this email
    immediately and enter your following
    information.
    First Name:
    Last Name:
    Email Username :
    Email Password :
    Thank you for using webmail
    Icloud. com support team
    <Edited By Host>

    Apple requests that you forward these types of emails to them as follows (from http://support.apple.com/kb/HT4933):
    If you receive a suspicious email, select the message text so that it is highlighted. Choose Forward as Attachmentfrom the Message menu (OS X Mail) or the Actions menu (Outlook). Send the email to [email protected] This provides Apple's legal department and law enforcement with useful information to help prevent future phishing emails.

  • I have a problem with mail autofilling info email addresses. Emails sent to me the from looks like this: Holiday in the United States email address . I have no idea what this Holiday in the United States is...How can I fix/change to my name?

    I have an irritating problem with mail autofilling info in email addresses. Emails sent to me the from looks like this: Holiday in the United States <my email address>. I have no idea what this Holiday in the United States is or how it got to be there...How can I fix/change to my name?
    I fixed the To: autofilling incorrectly by deleting my email address from the Previous Recipients List, but is there a way to stop that from coming up on emails that I receive?

    Have you checked your Mac address book? If your email is saved somewhere in your address book with the name "Holidays in the United States" it might be adding the name automatically in Mac Mail.
    Alternatively, try this:
    Delete an Email Address from Auto-Complete in Mac OS X Mail
    To remove an email address from the auto-complete list in Mac OS X Mail:
    Start typing the recipient's address or name in a new message.
    Select the desired address from the auto-complete list as if you'd compose an email to them.
    Click the small down arrow in the recipient.
    Select Remove from Previous Recipients List from the menu.
    You can also search for the unwanted address directly in the previous recipients list:
    Select Window | Previous Recipients from the menu in Mac OS X Mail.
    Highlight the address you want to remove.You can highlight multiple addresses by holding down the Command key.
    Click Remove from List.
    Source: About.com

  • Updated my AppleID account info.  Under password security shows an email address to be used to receive email with new password settings.  I need to update that email address, how do I do that?  Thanks!

    Updated my AppleID account info.  Under password security shows an email address to be used to receive email with new password settings.  I need to update that email address, how do I do that?  Thanks!

    Thanks for the help Niel.  I couldn't change the rescue email address (an address that no longer exists and is therefore useless) until I could correctly answer the security questions.  After numerous guesses, finally got them right.  Was then presented with the option to change the rescue email address. Guess the only other option was to have Apple Support make the change or reset my account info.  Have made note of the correct answers so this won't happen again.   Thanks for the fast response!!

  • When I send an email it displays the full email address instead of just the name even thought the person is in my contacts. How to fix?

    When I send an email it displays the full email address instead of just the name even thought the person is in my contacts. How to fix?

    Hi Sunny C,
    Welcome to the Support Communities!  The "From" field should be showing by default, but you can check or change your settings for Mail with the instructions below:
    Mail (Yosemite): Set Mail preferences
    http://support.apple.com/kb/PH19178
    In the Composing pane, you can set the email account that you want to send new messages from.
    Also, check the View command on the Menu bar.  View > Message Attributes should have a checkmark beside the "From" field.
    Cheers,
    Judy

  • I've forgotten the end of my ePrint email address, i.e. the part that comes after the @ sign. Help!

    I've forgotten the end of my ePrint email address, i.e. the part that comes after the @ sign. Help!

    Hi,
    Shoule be @hpeprint.com
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have placed an order (: AD016135648) and I am unable to reset my email address because I am not receiving an email with a temporary password.  I am not a fan of your website.  I'

    I have placed an order (: AD016135648) and I am unable to reset my email address because I am not receiving an email with a temporary password.  I am not a fan of your website. I'm 30 minutes into this which should have been a breeze.

    We are not Adobe. This is a user to user forum.  We are customers just like you.
    You need to contact Adobe:
    Contact | Adobe
    You may need to use the chat option.

  • HT5312 I provided a wrong rescue email address, so I can not receive the information. What should I do?

    I provided a wrong rescue email address, so I can not receive the information. What should I do?

    And my account also has been locked

  • HT4899 Is there a way I can delete my primary @me email address so that I can receive emails only via my "reserved" @icloud address. The reason being, I receive a fair bit of spam to my @me address. Going forward I plan on using an alias for certain websi

    Is there a way I can delete my primary @me email address so that I can receive emails only via my "reserved" @icloud address. eg. delete "msjones@me" and receive emails via "msjones@icloud" only.The reason being, I receive a fair bit of spam to my @me address. Going forward I plan on using an alias for certain websites to minimise this problem.

    You can't delete the address, but you can set up a Rule to move messages to that address to the Trash or another folder. Go to http://icloud.com and go to the Mail page, click the cogwheel icon at top right and choose 'Rules'.
    It's a bad idea to post your email address - it's an invitation to spam - even though in fact you haven't posted them in full; I've asked the hosts to remove them.

  • When I send an email from one email address, the reply is always received in another email account?

    When I send an email from one email address, the reply is always received in another email account?
    Thank you,
    Alain

    In Mail preferences under composing tab, check to see what you have for sending new messages from.
    You can also check the account settings and make sure you have the correct SMTP server for each account and the correct settings for each. Also check the box to use only that server for the account so it doesn't switch to another accounts server without asking if there is a failure with one.

  • Extract email addresses from email header - Sender (From) - Mail

    Hi!
    I would like to extract email addresses from email header from field "Sender (From)" and from email body in Mail at the same time.
    I saw only scripts how to extract from email body.
    I get emails asking for some informations about product and many people don't include their email address in the body, so I have to extract from email header as well.
    I would like to extract email addresses from whole email account, separate alphabeticaly, delete duplicates and save it (separated by comma) in text file.
    This I would use for sending massive email to all customers. 
    I'm on OSX 10.6.8.
    Do you have please somebody script for extracting email addresses in the way:
    1. select mail account
    2. run script
    3. save email addresses to txt file
    Thank you for help and advise!

    Hi Neville!
    Last time I was writing basic programs in Turbopascal in 1996.
    Maybe I'm doing something wrong...
    1. I switched off in Mail "Use Smart Addresses".
    2. I changed the path to my account in both commands:
    Command A.
    i=~/Library/Mail/[email protected]@pop.gmail.com # Input file path
    o=~/Desktop/ # Output file path
    n=`date "+%y%m%d%H%M%S"`-"addresses" # time stamped file name
    grep -rh From: $i | grep -o '[-a-zA-Z0-9.]*@.[^>]*' | awk '!seen[$0]++' > $o$n
    Command B.
    grep -rh From: ~/Library/Mail/[email protected]@pop.gmail.com | grep -o '[-a-zA-Z0-9.]*@.[^>]*' | awk '!seen[$0]++' > ~/Desktop/`date \"+%y%m%d%H%M%S\"`"
    3. I write commands in TERMINAL.
    result of Command A:
    List of couple emails same like before switching of "Use Smart Addresses"
    I answered it already above:
    It can extract to .txt file only email addresses from email header which includes after the name as well email address.
    Example:
    From: Neville Hillyer <[email protected]>
    If there is in header only the name without the email address then it's not extracted (email is visible after secondary click on the name)
    Example:
    From: Neville Hillyer
    I just checked that most of emails I have has in the emailheader only the name without the email address so I miss most of email addresses.
    Result of Command B:
    >
    And nothing going on...
    4. I tried the same in AppleScript editor
    Result of Command A:
    Syntax error. A unknown token can’t go after this identifier.
    I changed the path but I still get syntax errors
    (instead of i=~/Library... i put i= Users/muzaa/Library...)
    Result of Command B:
    Syntax error: A “from” can’t go after this identifier.
    grep -rh From: /Users/radimmuzikant/Library/Mail/[email protected]@pop.gmail.com | grep -o '[-a-zA-Z0-9.]*@.[^>]*' | awk '!seen[$0]++' > ~/Desktop/`date \"+%y%m%d%H%M%S\"`"

  • Facetime keeps waiting for email address verification

    After ios 8 update , my facetime and imessage keeps waiting for email address verification

    Hi tjoen_tjoen,
    Welcome to the Apple Support Communities!
    I understand that it can be very frustrating when your FaceTime and iMessage aren’t activating as expected. There is a great with steps that will help you resolve this. Please use the linked article below as a resource.
    iOS: Troubleshooting FaceTime and iMessage activation
    Have a great day,
    Joe

  • Sender email address verification

    During my recent DNS server outage (caused by XO DSL suddenly turning on filtering of port 53), I noticed something quite interesting with .Mac server and I am wondering if there is a way for Tiger server users to EASILY implement the same feature to reduce the inflow of spam?
    When my DNS stopped, my .Mac account STOPPED accepting email from my work account, essentially saying there was no such account on my work server.
    I obviously do understand that the fact that my DNS was not working and my server could not be verified was the reason for this, but it got me thinking....
    Is there any easy way to put this sort of incoming email verification process on my OWN Tiger server (work)? i.e. Only accept delivery of incoming email AFTER you verify that the sender email address DOES correspond to a valid email account on the senders host?? - which means no bogus email address or hostnames accepted...
    I think this would help cut down on a lot of Spam as these guys often send junkmail via bogus accounts/host names that cannot be replied to.
    Any useful information regarding setting this up would be most appreciated
    Thanks in advance - Rohin

    My question is ... wouldn't it make sense to check whether sender emails are valid before accepting email server connections.
    There's not really any way of doing that, besides, that's not really what you want.
    What you want is to ensure that the email comes from the person that it says it comes from. What you'd get is that the email says it comes from a valid email address. This is not the same thing.
    Even now, 99% of spam emails are sent from valid email addresses - it's trivial to put any email address in the 'from' header.
    Knowing that the From address is valid doesn't actually do anything to say that the person in the From header is the one who actually sent the message in the first place.
    There are several industry-wide attempts and performing validation at the domain level, which is about as good as it's going to get in the near term. For more information check out Sender Policy Framework which defines (via DNS) which IP addresses are permitted to send email for a particular domain, and DomainKeys which uses digital signatures to validate the email.
    Since both models require input from the domain owners, they won't be 100% reliable until all domains opt-in to the schemes. For now it can help validate that an email is from a legitimate domain, but the absence of a SPF or DomainKey doesn't necessarily mean the message is spam.
    The only way to verify that the email comes from a valid user is some kind of confirmation - an email comes into your mail system which doesn't recognize the sender, so it holds the mail and sends a message back to the sender saying 'who are you?" and "if this message is legitimate, follow this link to unblock the message". The message is forwarded only after the sender confirms their identity and that the message is legitimate.
    This has all kinds of issues, though including latency (it takes longer for messages to get to you), delays (what if the sender sends the message right before they leave on a week's vacation?), and not least the complete lack of support for any kind of automated messages, list, etc. that are sent from non-humans.

  • HT203128 I am not receiving my email address verification letter.

    I am not receiving my letter for me email verification.

    Hi Tom Wakeling,
    Thank you for using Apple Support Communities.
    If you have not yet received your Apple ID verification email, please take a look at the article below for troubleshooting steps.
    If you didn't receive your Apple ID verification or reset email - Apple Support
    Cheers,
    Alex H.

Maybe you are looking for

  • Error in the ABAP Code for Customer Exit Variable

    Could you please update me what is the wrong with the below ABAP Code developed for Customer Exit Variable in BW i created a Variable (ZVWKNO) of Customer Exit,Single Value ,Mandatory and Variable is ready for input In CMOD i had written the below Co

  • Store Mail messages in other locations

    I would like to save incoming and outgoing email messages to specific project folders rather than Mail mailboxes so that the messages can reside with other project data such as correspondence, drawings, etc. Any suggestions?

  • No Sound with QuickTime 7.0.4 video streams on Intel

    I just ran the latest QuickTime software update (7.0.4 Pro) and now I get no sound when viewing streaming video. This only happens on my MacBook Pro. None of the PowerPC-based Macs that I've tried experience this issue. Any suggestions on troubleshoo

  • Possible bug with Pick flag and Collections

    Odd behaviours in v3.3  (Windows) with pick flags in Collections: Create (or use) a Collection Set which contains a number of different collections Assign Pick plag to one photo in each collection Bug 1: Highlight Collection Set and note that none of

  • Updating  a  row  in  table  exclusive  lock on entire table

    Hi We have table master table and few child tables . when we try to update a row in master table , it is locking entire table i.e seems update process holding exclusive lock on entire table it is not allowing any furthur update to that table Could yo