FaceTime worked fine for a year and just quick working??
I had no problems with the Face Time usage on my MACPRO ...then a couple of months ago it just quit working? Says it is off - I click on and preferences and the eternal circle goes non stop?
Anyone else have issues with Face Time?
I called AppleCare yesterday to find out if my Logs had been analyzed and if they had an answer for my FaceTime issue. They did indeed have the answer. It was a "serialization problem". The original logic board in my Mac Pro 1,1 needed to be replaced, right after I purchased it, and the ASP didn't "serialize" the new board. The AppleCare rep told me to take it in to any Apple Store and they will serialize the board or replace it if necessary!!! And they refunded my $19.00 for Single-Incident support since it was due to an oversight by the original ASP! AWESOME!!!!!!!!
I shot over to my local Apple Store and within 5 minutes (FIVE MINUTES!) FaceTime was working!
Not sure if this will help anyone else, but paying $19.00 for AppleCare support is definitely the way to go, and you might even get it refunded!
This was a one week process, since my initial call to Apple, but they reviewed the logs and found the problem. The reps were all very professional and very knowledgeable. I can't say enough about this!! Very Happy!
Similar Messages
-
My Ipad has worked fine for a year and now it won't play music or videos
My Ipad has suddenly stopped playing music and videos??
Swipe your phone to unlock and enter your passcode.
You needed to enter a passcode before using the touch id.
If you touch id isn't working, then erase the old print and re do it.
I use two prints and have no issues using it. -
my ipad 2 touchscreen doesn't work on most of the screen it got cracks all down the left side of my ipad and it has been working fine for a year after cracking but just woke up and touchscreen doesnt work i have tried to reboot it but still nothing
It might be time to contact Apple for an out of warranty repair (actually replacement)
See here: http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Replacement for any model iPad 2 is $249 -
Streaming music with airport express and Apple TV to 2 different systems. No problem with Apple TV. iPad and iPhone 4 and new 5s keep dropping their connection to airport express. Airport express connection to wifi appears to be fine. No dropping by windows PC. This just started recently after working fine for a year. Help?
What does any of this have to do with the Apple TV?
-
My CS2 has worked fine for serval years. All of a suddend my user name, Alan Ford, and sereal number have vanished from my program. How do I correct this?
Hello,
Why do you need to use the regasm utility from the post-build action?
There is a difference between signing the assembly with a strong name and digital signature. The
How to: Sign an Assembly with a Strong Name article in MSDN explains how to sign an assembly with a strong name (.snk). See
How to digitally sign a strong named assembly for adding a digital signature.
You may also find the
What's the Difference, Part Five: certificate signing vs strong naming article helpful. -
My flash drive which worked fine for 2 years crashed
I have a 32G flash drive which worked fine for 2 years. Then the Disk Utility says it needs repairing but the repair command is disabled.
So I transferred the entire content of the drive to another drive .
Now I want to reformat the drive that needed repair and hopefully save keep it as a spare drive. Somehow I don't know how to format it and I'm too lazy to drag up my PC and do it there.
How do I format it straight from my Macbook Air.
Thanks
Sil...cluelessThe following previous discussion covers it and some of the options: How do I format a USB stick on my iMac
-
my apple tv (1st gen) has worked fine for a year/ All of a sudden it has stopped displaying any movies or tv. It only displays my movies or my tv that has been previously down loaded. however it appears connected wirelessly with good signal strength. Have tired swithing off both router and apple TV. Any ideas?
This is a known, ans ongoing issue. Rest assured you're not the only one affected. There are several threads here already discussing this, I suggest searhing them out if you want more details, and possible work-arounds for locally hosted content.
-
Iphone 4 camera worked fine for 2 years then all photos with flash came out as red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414 -
My macbook from 2008 which I bought used worked fine for 3 weeks and then suddenly it started restarting and now it restarts, goes to grey apple screen and a code saying something about a kernel panic appears and it restarts again and again. Help?
Restart the computer and immediately hold the Option key down.
Select the Recovery partition and continue.
On the next pane, select Disk Utility and continue.
When DU opens, select your hard drive in the left column, click the First Aid tab, the click Repair Disk.
When that is done, quit DU and restart in the usual way. -
Extend a network worked fine for 2 years, now it doesn't
Sorry I'm not at home so I've gotta go off bad memory...
My setup has worked fine for a number of years. A non-simultaneous dual band Extreme is the main base station. I have a Express ethernet-ed to the network working without issue. There's also a newer Extreme farther away that has been wirelessly extending the network without too much issue until now. Airport Utility pops up now saying the newer Extreme is unable to extend. All I attempt to do is restart because all my settings seem to have been fine. Original base set to create with extend checked, and the newer Extreme set to extend with the same ssid, password etc.
So what's changed if I haven't changed anything? Newer versions of something?
Thanks for any input.First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes." -
So yes like mentioned above...i am a new mac user...have only had it about four days and have had a windows based system always before this. The issue I am having is that I will be in safari and it will work perfect for a while and then i will open a new tab and attempt another website and it will either be extremely slow or will give the error that it cannot connect to the server, however, when i run diagnostics my internet is fine. The only solution i have found is to reboot and geeksquad has been unable to replicate the problem while connected to my computer to try to do so. Does anyone have any suggestions or anyone else with this problem? If you have a "fix" please try layman's terms because again I have no idea about macs haha. Thanks,
So yes like mentioned above...i am a new mac user...have only had it about four days and have had a windows based system always before this. The issue I am having is that I will be in safari and it will work perfect for a while and then i will open a new tab and attempt another website and it will either be extremely slow or will give the error that it cannot connect to the server, however, when i run diagnostics my internet is fine. The only solution i have found is to reboot and geeksquad has been unable to replicate the problem while connected to my computer to try to do so. Does anyone have any suggestions or anyone else with this problem? If you have a "fix" please try layman's terms because again I have no idea about macs haha. Thanks,
-
We bought this itouch for our daughter for Christmas (2011), It has worked fine all this time until now. All of a sudden it will not connect to our home wi fi. All the other ipods/iphones/laptops and desktop are connecting fine so I know it is not the router itself. I have tried all the standard troubleshooting tips (forgetting the network and resetting it on the ipod, turning it off an on, plugging it in and updating the software, we even restored it completely from itunes as a new ipod). It lists the network as available but then when you try to connect it just sits there with the little circle icon thing spinning, trying to connect but never does.Please help!
So you also rebooted your router correct? Does the iPod still connect okay to other networks?
B-rock -
Have just connected a viewsonic external monitor to macbook pro 10.6.8, had everything up and running fine for about an hour then the macbook quit. No power (ws running off power source) Have I killed my macbook? Help!
Aha, all is good.
I went to Library/ColorSync/Profiles/Displays
and to home/Library/ColorSync/Profiles/Displays
and deleted all SyncMaster.icc files. I did leave behind one SyncMaster file in the home/../Displays which had an old date and I new was ok.
Rebooted, plugged in SyncMaster, and a new icc file was automatically created in the /Library/../Displays folder.
My display works normally, now. -
Have lost ability to open Boot Camp on start or restart. Icon does not show up. Had been working for 2 years, then nothing. Recently had problems with Kodak Easy Share in PC partition. Any connection? Any hope of reopening Boogt Camp without losing data already there?
Can you see there is a partition?
Can you boot Windows 7 DVD?
Did you think you would never need a backup image?
So no Safe Boot, no F8, possible?
Paragon CampTune
Paragon CampTune is a commercial product that is designed expressly for this task. http://www.paragon-software.com/home/camptune/ It consists of a downloadable ISO that needs to be burned to a disc and booted from in order to resize the partitions. During testing it was available free, but now costs US$19.95. MR user Rodus reports that it damaged their OS X partiton and a reinstall was required, so heed the warning and have a backup.
Paragon Partition Manager
From the makes of CampTune is a commercial tool that is similar in functionality to GParted Live, but has a more polished/friendly user interface than GParted Live. Previously only the US$79.95 Professional version supported all the features required for this, but as of version 11 the US$39.95 Personal version has also been reported to work. http://www.paragon-software.com/home/pm-personal/
Securing Dual-System Configuration
Imaging is still the most affordable and robust way to secure computer data. Unfortunately Mac OS X backs up only HFS+ volumes, leaving Windows with dual-system configurations unsecured. You can permanently lose all of your data unless you have a Windows-compatible backup solution.
Paragon’s CampTune and Paragon’s Drive Copy for Mac can secure the entire dual-system configuration. CampTune creates traditional images of volumes or entire hard disks, Drive Copy can copy them to other disks. In case of an emergency, you can restore the previously created image or copy all your data back to its original state.
Winclone/Disk Utility
Winclone is a free tool for creating and restoring backup images of your Windows partition. One of its key features is that it can restore to a larger partition than the one the image was created from.
NOTE: Winclone has been discontinued, but for now remains available and capable of completing these tasks (including creating and restoring Windows 7 images).
Winclone updated to support Lion Winclone updates and download
Disk Utility can resize HFS+ (Mac OS) partitions, but is currently incapable of resizing NTFS partitions, so you could use it to reduce the size of the HFS+ partition and create a new larger placeholder MS-DOS (FAT) partition
The full process would be:
Backup Windows partition with Winclone.
(if the new Windows partition is smaller than the old one make sure you set the preferences in Winclone to save the image as an uncompressed dmg)
Delete old Windows partition
Resize current Mac Partition
Create new Windows partition as MS-DOS (FAT) in free space after Mac OS partition.
(If the new Windows partition is smaller than the old one an additional step is required: shrink the filesystem on the image by selecting Tools->Shrink Windows (NTFS) Filesystem)
Reboot your computer for the new Windows partition to mount properly (winclone may not restore if you don't reboot)
Restore Winclone partition over new Windows partition
An alternate Winclone based process is described in the External Guides section -
VPN working fine.... then just stopped working!
Have posted this before, but was hoping that someone out there has experienced the same issue.
I setup the VPN on 10.6 McMini server and it worked really well for several weeks. Then all of a sudden (without any changes being made to the server) it just stopped working!
I cant get a VPN connection either on the internal network (so no routers involved here) or from external clients. Both of these worked before. Im convinced its def something to do with the server.
The error I get is PPP Server could not be authenticated.
Have tried restarting server, stopping and starting VPN service, turning L2TP and PPP of and on again, changed the shared key.. Checked the DNS with changeip and that is all good....
Hopefully soemone out there will be able to shed some light on this for me...
Here is the log from the VPN :
2011-03-09 09:25:41 GMT Listening for connections...
2011-03-09 09:26:13 GMT Incoming call... Address given to client = 192.168.181.148
Wed Mar 9 09:26:13 2011 : Directory Services Authentication plugin initialized
Wed Mar 9 09:26:13 2011 : Directory Services Authorization plugin initialized
Wed Mar 9 09:26:13 2011 : L2TP incoming call in progress from '192.168.181.161'...
Wed Mar 9 09:26:13 2011 : L2TP received SCCRQ
Wed Mar 9 09:26:13 2011 : L2TP sent SCCRP
Wed Mar 9 09:26:13 2011 : L2TP received SCCCN
Wed Mar 9 09:26:13 2011 : L2TP received ICRQ
Wed Mar 9 09:26:13 2011 : L2TP sent ICRP
Wed Mar 9 09:26:13 2011 : L2TP received ICCN
Wed Mar 9 09:26:13 2011 : L2TP connection established.
Wed Mar 9 09:26:13 2011 : using link 0
Wed Mar 9 09:26:13 2011 : Using interface ppp0
Wed Mar 9 09:26:13 2011 : Connect: ppp0 <--> socket[34:18]
Wed Mar 9 09:26:13 2011 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x5934b5e4> <pcomp> <accomp>]
Wed Mar 9 09:26:13 2011 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x239b96e4> <pcomp> <accomp>]
Wed Mar 9 09:26:13 2011 : lcp_reqci: returning CONFACK.
Wed Mar 9 09:26:13 2011 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x239b96e4> <pcomp> <accomp>]
Wed Mar 9 09:26:13 2011 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x5934b5e4> <pcomp> <accomp>]
Wed Mar 9 09:26:13 2011 : sent [LCP EchoReq id=0x0 magic=0x5934b5e4]
Wed Mar 9 09:26:13 2011 : sent [CHAP Challenge id=0x6e <497c45160158160c673b40066c697935>, name = "tabloidserver.farnham.fcn"]
Wed Mar 9 09:26:13 2011 : rcvd [LCP EchoReq id=0x0 magic=0x239b96e4]
Wed Mar 9 09:26:13 2011 : sent [LCP EchoRep id=0x0 magic=0x5934b5e4]
Wed Mar 9 09:26:13 2011 : rcvd [LCP EchoRep id=0x0 magic=0x239b96e4]
Wed Mar 9 09:26:13 2011 : rcvd [CHAP Response id=0x6e <b9b67750edb8186d6d48bc0b9d9405d000000000000000002f8f465d892860e169ed20ebab1d33 9aaace5ecd0eb28d0700>, name = "garnettgreen"]
Wed Mar 9 09:28:42 2011 : sent [CHAP Success id=0x6e "S=E6415BFDE46D35DD639BE513051169EEE28ECB44 M=Access granted"]
Wed Mar 9 09:28:42 2011 : CHAP peer authentication succeeded for garnettgreen
Wed Mar 9 09:28:42 2011 : DSAccessControl plugin: User 'garnettgreen' authorized for access
Wed Mar 9 09:28:42 2011 : sent [IPCP ConfReq id=0x1 <addr 192.168.181.122>]
Wed Mar 9 09:28:42 2011 : sent [ACSCP ConfReq id=0x1]
Wed Mar 9 09:28:42 2011 : L2TP received CDN
Wed Mar 9 09:28:42 2011 : L2TP hangup
Wed Mar 9 09:28:42 2011 : Connection terminated.
Wed Mar 9 09:28:42 2011 : rcvd [CHAP Response id=0x6e <b9b67750edb8186d6d48bc0b9d9405d000000000000000002f8f465d892860e169ed20ebab1d33 9aaace5ecd0eb28d0700>, name = "garnettgreen"]
Wed Mar 9 09:28:42 2011 : Connect time 2.5 minutes.
Wed Mar 9 09:28:42 2011 : Sent 0 bytes, received 0 bytes.
Wed Mar 9 09:28:42 2011 : L2TP disconnecting...
Wed Mar 9 09:28:42 2011 : L2TP sent CDN
Wed Mar 9 09:28:42 2011 : L2TP sent StopCCN
Wed Mar 9 09:28:42 2011 : L2TP disconnected
2011-03-09 09:28:42 GMT --> Client with address = 192.168.181.148 has hungupMy Server is OS X 10.6.8 Server, my clients ar all 10.7 but I tested today with an 10.6.6 and it did't work as well.
The protokoll says:
2011-07-28 20:51:28 CEST Incoming call... Address given to client = 192.168.1.166
Thu Jul 28 20:51:28 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:28 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:28 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:28 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:28 2011 : L2TP sent SCCRP
2011-07-28 20:51:29 CEST Incoming call... Address given to client = 192.168.1.167
Thu Jul 28 20:51:29 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:29 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:29 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:29 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:29 2011 : L2TP sent SCCRP
2011-07-28 20:51:31 CEST Incoming call... Address given to client = 192.168.1.168
Thu Jul 28 20:51:31 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:31 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:31 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:31 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:31 2011 : L2TP sent SCCRP
2011-07-28 20:51:35 CEST Incoming call... Address given to client = 192.168.1.169
Thu Jul 28 20:51:35 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:35 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:35 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:35 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:35 2011 : L2TP sent SCCRP
2011-07-28 20:51:39 CEST Incoming call... Address given to client = 192.168.1.170
Thu Jul 28 20:51:39 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:39 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:39 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:39 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:39 2011 : L2TP sent SCCRP
2011-07-28 20:51:43 CEST Incoming call... Address given to client = 192.168.1.171
Thu Jul 28 20:51:43 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:43 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:43 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:43 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:43 2011 : L2TP sent SCCRP
2011-07-28 20:51:47 CEST Incoming call... Address given to client = 192.168.1.172
Thu Jul 28 20:51:47 2011 : Directory Services Authentication plugin initialized
Thu Jul 28 20:51:47 2011 : Directory Services Authorization plugin initialized
Thu Jul 28 20:51:47 2011 : L2TP incoming call in progress from '192.168.1.2'...
Thu Jul 28 20:51:47 2011 : L2TP received SCCRQ
Thu Jul 28 20:51:47 2011 : L2TP sent SCCRP
2011-07-28 20:51:48 CEST --> Client with address = 192.168.1.166 has hungup
2011-07-28 20:51:49 CEST --> Client with address = 192.168.1.167 has hungup
2011-07-28 20:51:51 CEST --> Client with address = 192.168.1.168 has hungup
2011-07-28 20:51:55 CEST --> Client with address = 192.168.1.169 has hungup
2011-07-28 20:51:59 CEST --> Client with address = 192.168.1.170 has hungup
2011-07-28 20:52:03 CEST --> Client with address = 192.168.1.171 has hungup
2011-07-28 20:52:07 CEST --> Client with address = 192.168.1.172 has hungup
Thanks for any help!
Maybe you are looking for
-
Hi All, In asset accounting if we wants to calculate depreciation for Years & Months we can calculate by getting option in depreciation area tab of asset master record. for e.g If situation is 7 yers & 6 months then yera column we give 7 & period col
-
GRC AC Maintain Configuration Settings for BRM
Hello all! I´m folowwing the guide http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0025394a-1564-2e10-2c97-accc8cfd6888?QuickLink=index&- (AC 10.0 Pre-Implementation) and have a doubt. At page 11 the guide shows one screen whit var
-
Hello today I received my L540 and I'm installing all the drivers at the moment. After I installed the trackpad/point drivers I disabled the trackpad. But now I noticed that the middle mouse button isn't working. How can I fix this issue? Also is the
-
The keyboard for my iMac 9, got wet and is not working correctly. Delete ,return, and some other keys not functioning. In all caps including numerals. I've left it to dry for a few days but still will not work. Computer now in Safe boot mode and I ca
-
Logic Pro 9 won't recognize my serial key
hey there, so i used to have Logic Pro 9 installed on my Macbook, but my Macbook died and I've recently had to buy a new one. when I tried to re-install the program, the key provided on the back of 'Installing Logic Pro' isn't being recognized by the