Facing an error your post has been flagged and it is currently under addtional verification

Hi All ,
Please tell me how can i get rid of this issue ?
I am facing an error when i try to post a query on the exchange forum .Below is the error message .
Error message : your post has been flagged and it is currently under addtional verification
Also i have attached a snap please give me the soulution to resolve this error.
Regards
S.Nithyanandham
Thanks & Regards S.Nithyanandham

Hi Richard ,
Please find the below content which i have tried to post.Please help me if anything wrong in the content so that i can change it and repose the content again.
Thanks in Advance
Content:-
Hi ,
Please have a look in to the below mentioned environment.
primary site :Chennai
server 1
server 2
secondary site : Madurai
server 3
Note : All the above three servers are in single DAG .All the database are mounted on the server (server 1) which is located in the primary site .
On that 5 databases we are having 3500 users .Based on the user designation we have allocated the mailbox size.
Query : Each and every day we are having the large no copy queue length for all the five databases to the server located in Madurai site.
Note : This is an urgent requirement , so please someone help me on this thread and also tell me on what basis i have to allocate the required bandwidth for the exchange servers located between Chennai and Madurai site to reduce the copy queue length .
Without having any data in my hand i cannot blankly go and ask my network peoples to provide so and so bandwidth for exchange servers.
Please help me out on this and also tell me is there any tool available to exactly get the required bandwidth for the exchange servers located between the active directory sites.
Thanks & Regards S.Nithyanandham

Similar Messages

This board and "Your post has been changed because invalid HTML.."

I have got warning messages when previewing and posting of...
"Your post has been changed because invalid HTML was found in the message body. The invalid HTML has been removed. Please review the message and submit the message when you are satisfied."
Why can't you just allow users to post "code" samples.
Here are examples on posting code on another site with forums..
http://www.dslreports.com/faq/1037
http://www.dslreports.com/forum/remark,8477196
Quick two quote(s) from that last URL
#1 A code block is very useful when you do not wish anything you type to be interpreted (or misinterpreted) within the code block itself. The format of the text is also exactly preserved, all spaces, and everything.
#2 Within a code block, special characters, > ' &
and so on, can be used without any interpretation
being done on them by the forum software or by the
viewers browser.
If it is possible to do that here, how does one do that?
Please and thank you.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.
Solved!
Go to Solution.

Hi dslr595148,
That is certainly possible and has been implemented. When you are in the editor writing a post look above the window for this symbol.
Thanks for the suggestion!

If your iPad has been stolen and you have the serial

My ipad has been stolen and I was wondering if apple could find it using the serial #

Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
 Cheers, Tom

GroupWise Messenger Error Your Account has been disabled

Has anyone had this error? I have it on one user and can't figure out what is wrong with him.

kpollard,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Your Voucher has been suspended and can no longer be used !!?

Hi guys,
I have purshased 2 vouchers for 2 Java exams it's been a while, they have both expiration date at 31-AUG-2013 , lately when I tried to apply them for my exam at PearsonVue a message appears and tells me that "the voucher is SUSPENDED and can no longer be used"
I don't understand what is going on and they dont even tell why it is suspended
is there something I can do about it? thanks in advance
- Kacem

I'm pretty sure that for this situation, you'll need to contact Oracle Certification Support Oracle University - Support Form. If it is the issue that I suspect, Oracle Certification Support will need to assist. Please provide the voucher numbers when you contact Oracle, they will need to know the voucher numbers and any purchase info you have - where did you purchase, how did you pay, can you provide a receipt?
Regards,
Brandye Barrington
Certification Forum Moderator

On iTunes, while I will be putting a previous back up on my new 6, an error message saying '"your phone has been disconnected" will appear, but my phone will still be connected and nothing has been touched

I need help. I have tried it with the cord that came with my 6, as well as my iPad mini cord, and no matter what cord i use, it still shows "your phone has been disconnected", and no one is disconnecting the cord.

http://support.apple.com/kb/HT4137
How to restore as new.
and this for itunes message
http://support.apple.com/kb/HT1808

Your account has been locked for the next 3 hours due to

I am posting this message on behalf of people unable to access the site due to locked account status.
I have few co workers in my office getting error "Your account has been locked for the next 3 hours due to
too many invalid login attempts. Please try again later.
". They are trying to access the site with valid userID and Password. Is it possible to do a global check for this issue.
Thanks,
RJ

If your account is locked you cannot edit your personal information, make purchases, or access iCloud or MobileMe.
See this for what to do: "This Apple ID has been disabled for security reasons" alert
appears, http://support.apple.com/kb/TS2446

Slingbox: setup problem "your Slingbox has been disconnected due to poor internet connection"

Does anyone have experience in setting up a Slingbox with their Verizon router? If so, have you encountered this error ("your Slingbox has been disconnected due to poor internet connection")? How did you fix it?
Thanks!!

#1 Are you on
a) DSL
b) FIOS?
#2 At least what the brand and model of your router is.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

"Microsoft" calls to tell you that your PC has been hacked

I just got a call from someone claiming to be from Microsoft. He told me that my computer was infected.
He said that Microsoft knew that the PC was hacked because of the error reports I chose to send them when the pop up came up.
You probaly have seen the ones like this.
This was ineresting since I know that no personal information goes to Microsoft when you send the error reports.
Knowing that ther are a large number of scams like this, I asked for the phone number to call them back. He said that he would call me back. Then after pushing some more he gave me a bunch a random numbers.
If you look at Microsoft's Forum and the have a thread called "Phone warnings from 'Microsoft.'"
Bascially, Mircosoft didn't call me to warn me that my PC was hacked. Someone was fishing trying to get acess to my PC.
If you get a call, beware.
I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.

Does iOS7 tell you if your phone has been fully charged?
Yes, currently I'm using iPhone 4s with iOS 7.1, following behaviour I could observed,
When batter is charging--> Top right corner in the iPhone charging symbol is filled with white color.
When batter is fully charged--> Top right corner in the iPhone charging symbol is filled with black color.

Your account has been deactivated ?

HEllo !
I am unable to login to portal, not even from "portal30" user and "portal30_sso" user.
I am receiving this error :
Your account has been account deactivated
'account_deactivated_err'
How to activate it
Regards
Seemab

Why i am getting this error !
Error: Your account has been deactivated. Please contact the account administrator to activate your account. (WWC-41963)
not even one username is connecting. not even portal30 and portal30_sso .
How to resolve it.
Regards
Seemab

New error with upgrade jboss/tomcat: "Connection handle has been closed and is unusable"

Hi,
This error suddenly appeared when we upgraded from jboss3/tomcat5.0 to jboss4.2/tomcat5.5.
here's the usecase:
1) User clicks on report link
2) Crystal reports web componnent displays screen to fill in report parameters.
3) user enters parameters and clicks submit
4) System throws Exception
The same reports worked fine with jboss 3.2.6/tomcat 5.0. We haven't touched anything in this realm.
Log Excerpt:
09:42:18,842 INFO [datasource] Openning rowset
09:42:18,904 ERROR [reportdefinition] com.crystaldecisions.reports.queryengine.driverImpl.m: JDBC Error: Connection handle has been closed and is unusable
09:42:18,905 ERROR [datasource] Failed to open rowset: the query failed to open rowset
com.crystaldecisions.reports.reportdefinition.datainterface.g: JDBC Error: Connection handle has been closed and is unusable
 at com.crystaldecisions.reports.reportdefinition.datainterface.d.a(Unknown Source)
To try to narrow down the problem, I've updated the jdbc configuration to
 <track-statements>true</track-statements>
here's a recap:
This Boolean element specifies whether to check for unclosed statements when a connection is returned to the pool. If it is true, a warning message is issued for each unclosed statement. If the log4j category org.jboss.resource.adapter.jdbc.WrappedConnection has trace level enabled, a stack trace of the connection close call is logged as well. This is a debug feature that can be turned off in production.
Interestingly enough, this error appears slightly upstream:
(CachedConnectionManager.java:526) - Closing a connection for you. Please close them yourself: org.jboss.resource.adapter.jdbc.WrappedConnection@c76003
java.lang.Throwable: STACKTRACE
 at
org.jboss.resource.adapter.jdbc.WrapperDataSource.getConnection(WrapperDataSource.java:88)
 at com.crystaldecisions.reports.queryengine.driverImpl.k.a(Unknown Source)
 at com.crystaldecisions.reports.queryengine.driverImpl.o.if(Unknown Source)
 at com.crystaldecisions.reports.queryengine.av.new(Unknown Source)
 at com.crystaldecisions.reports.queryengine.av.byte(Unknown Source)
 at com.crystaldecisions.reports.reportdefinition.datainterface.b.a(Unknown Source)
 at com.crystaldecisions.reports.reportdefinition.datainterface.b.a(Unknown Source)
 at com.crystaldecisions.reports.reportdefinition.datainterface.b.a(Unknown Source)
 at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source)
 at com.crystaldecisions.reports.dataengine.ba.try(Unknown Source)
 at com.crystaldecisions.reports.common.av.a(Unknown Source)
 at com.crystaldecisions.reports.common.ag.a(Unknown Source)
 at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown
So the question arises:
1) Is the jboss datasource overly/aggressively closing result sets?
2) or is there a coding error in CRXIR2?
thanks,
bill
Full stack trace:
[2008-03-13 17:26:18,905] [INFO ] org.jboss.resource.connectionmanager.CachedConnectionManager (CachedConnectionManager.java:526) - Closing a connection for you. Please close them yourself: org.jboss.resource.adapter.jdbc.WrappedConnection@c76003
java.lang.Throwable: STACKTRACE
 at org.jboss.resource.connectionmanager.CachedConnectionManager.registerConnection(CachedConnectionManager.java:290)
 at org.jboss.resource.connectionmanager.BaseConnectionManager2.allocateConnection(BaseConnectionManager2.java:417)
 at org.jboss.resource.connectionmanager.BaseConnectionManager2$ConnectionManagerProxy.allocateConnection(BaseConnectionManager2.java:842)
 at org.jboss.resource.adapter.jdbc.WrapperDataSource.getConnection(WrapperDataSource.java:88)
 at com.crystaldecisions.reports.queryengine.driverImpl.k.a(Unknown Source)
 at com.crystaldecisions.reports.queryengine.driverImpl.o.if(Unknown Source)
 at com.crystaldecisions.reports.queryengine.av.new(Unknown Source)
 at com.crystaldecisions.reports.queryengine.av.byte(Unknown Source)
 at com.crystaldecisions.reports.reportdefinition.datainterface.b.a(Unknown Source)
 at com.crystaldecisions.reports.reportdefinition.datainterface.b.a(Unknown Source)
 at com.crystaldecisions.reports.reportdefinition.datainterface.b.a(Unknown Source)
 at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source)
 at com.crystaldecisions.reports.dataengine.ba.try(Unknown Source)
 at com.crystaldecisions.reports.common.av.a(Unknown Source)
 at com.crystaldecisions.reports.common.ag.a(Unknown Source)
 at com.businessobjects.reports.sdk.b.e.a(Unknown Source)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.z.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ak.if(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.ad.int(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.bk.for(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.v.a(Unknown Source)
 at com.crystaldecisions.proxy.remoteagent.v.if(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
 at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setTableLocation(Unknown Source)
 at com.crystaldecisions.reports.sdk.DatabaseController.setTableLocation(Unknown Source)
 at org.apache.jsp.reports.processreport_jsp.switchTables(processreport_jsp.java:131)
 at org.apache.jsp.reports.processreport_jsp.loadReport(processreport_jsp.java:68)
 at org.apache.jsp.reports.processreport_jsp._jspService(processreport_jsp.java:227)
 at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
 at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:387)
 at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:320)
 at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at com.participate.shared.pagecache.client.PageCacheFilter.doFilter(PageCacheFilter.java:760)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at com.participate.util.servlet.ExpiredPasswordFilter.doFilter(ExpiredPasswordFilter.java:92)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at com.participate.pe.channels.client.servlet.ChannelUrlFilter.processUrl(ChannelUrlFilter.java:168)
 at com.participate.pe.channels.client.servlet.ChannelUrlFilter.doFilter(ChannelUrlFilter.java:100)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at com.participate.util.servlet.BlockIpAddressFilter.doFilter(BlockIpAddressFilter.java:224)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at com.outstart.multiapp.filters.KeepOtherSessionsAliveFilter.doFilter(KeepOtherSessionsAliveFilter.java:88)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at com.participate.util.servlet.SetCharacterEncodingFilter.doFilter(SetCharacterEncodingFilter.java:151)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
 at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:179)
 at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
 at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)
 at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
 at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
 at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)
 at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
 at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:580)
 at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
 at java.lang.Thread.run(Thread.java:619)


OK. I found the problem along with a workaround.


The problem:


a programming practice clashes with a new jboss 'safety check'.


Programming practice:


crystal reports gets a database connection in one jsp page, then tries to use it on another jsp/servlet


Jboss safety check:
Jboss/tomcat new comes configured out-of-the-box with a 'cached connection
manager', which


"Check[s] for unclosed connections and transaction terminated checks in servlets/jsps."


 Summary


In short, if a servlet/jsp ends and it leaves a database connection open, Jboss will automatically close it.




Workaround: 
Comment out two entries in these two files:


1) conf/jboss4/pe/deploy/jboss-web.deployer/server.xml


2) conf/jboss4/pe/deploy/jboss-web.deployer/META-INF/jboss-service.xml


The two entries:




1)


 <Valve className="org.jboss.web.tomcat.service.jca.CachedConnectionValve" 
 cachedConnectionManagerObjectName="jboss.jca:service=CachedConnectionManager" 
 transactionManagerObjectName="jboss:service=TransactionManager" /> 


2)


 <depends>jboss.jca:service=CachedConnectionManager</depends> 




Comments on the workaround


The 'cached connection manager' basically makes sure that the application cleans up after bad programmers. It seems most helpful in development, load testing, or trouble shooting.


In production, you can likely comment them out with minimal
impact on the application.

Your appleid has been disabled

It's been over couple of months,I been trying to access and update my macbook pro applications,whenever i am trying to login the message pops up and says your appleid has been disabled contact support. It all started when someone used my account and downloaded content without my knowledge,through my e-mail i came to know about the transaction. Instantly i send the mail regarding this transaction and apple support disabled my id. After that i was been told to change my password,i did the same and my id was re-enabled,Thanks to apple support. But that time i was not able to use the same card for transaction,i was been told to change the payment options,as i cant change my card cuz i have only one bank account and only one debit card that too with ICICI bank,India. Now,out of nowhere i received the message your appleid has been disabled and again i cant update my macbook pro apps. So,there are 2 issues
1. Cant login using my apple id
2. Cant use the same card for the transaction in the appstore.

I recently helped someone with a similar issue. Someone had stolen their credit card information and used it with a completely unrelated iTunes account. Apple went on to disable every account that this family used because they had that same credit card associated with it. So, if your about to charge back iTunes charges on your credit card because you didn't do it, change your payment method first. I was able to call 1-800-APL-CARE to get it fixed. Whenever they tried to do something else to correct it like resetting my password, I'd tell them "my brother just recently had this problem and said you guys chatted with the iTunes team to fix it." Once the agent did that, the accounts were working again, good luck to everybody that has to call Apple to get this resolved.

I am receiving a message that my ID has been disabled, and I followed the steps to change the password, but still receive the same message. Cannot access app store or do updates.

I am receiving a message that my ID has been disabled, and I followed the steps to change the password, but still receive the same message. Cannot access app store or do updates.

In what way are you receiving this message? It is very common to get an email telling you that your ID has been disabled, and asking you to confirm all your details so the sender can steal your identity online.....

Database error - ORA-00028: your session has been killed

Hi, I'm working with Discoverer 10g and eBS 11.5.9
I have an application user (oracle) which works perfectly when I login with Discoverer Viewer, but when I try to login with Discoverer Desktop (the Oracle application user check box is checked),I have the following behaviour:
1. I (apparently) connect to the DB
2. I choose the responsibility
3. I receive the error:
Enable to connect to: oracle@rac
Database error - ORA-00028: your session has been killed
The strange thing is that this application user works perfectly with Viewer.....
Anyone knows if there is some lock at the database level, and which lock ? or it's something related to the Discoverer Administrator's permissions ?
Thanks in advance
Alessandro

Hi, I'm working with Discoverer 10g and eBS 11.5.9
I have an application user (oracle) which works perfectly when I login with Discoverer Viewer, but when I try to login with Discoverer Desktop (the Oracle application user check box is checked),I have the following behaviour:
1. I (apparently) connect to the DB
2. I choose the responsibility
3. I receive the error:
Enable to connect to: oracle@rac
Database error - ORA-00028: your session has been killed
The strange thing is that this application user works perfectly with Viewer.....
Anyone knows if there is some lock at the database level, and which lock ? or it's something related to the Discoverer Administrator's permissions ?
Thanks in advance
Alessandro

"SQlite Version Error The application has been updated, but your version of SQlite is too old and the application cannot run." What is this all about?? Shall I give up on Firefox?

When I tried to use Firefox this morning I got this message with exclamation marks.
"SQlite Version Error The application has been updated, but your version of SQlite is too old and the application cannot run."
What is this all about?? Shall I give up on Firefox?

Sorry to hear that. I understand your frustration and I hope they send back a better working N78-3.
Myself, I count myself lucky. Everything works perfectly for me right now...email, bluetooth, maps, gps, 3rd party apps, battery life, 3G, wifi, etc. etc.
The only issue I've been having is the dreaded reboots but I believe that may have to do with 3rd party apps. I recently uninstalled Google Search app from my N78 and since then it hasn't rebooted or shown any issues. This seems odd at first but makes sense if you think about the fact that the Google Search app loads itself into memory and runs in the background at all times.
I did this this past Tuesday night and so far no reboots, crashes or any problems. I'm sure I just jinxed myself but I've been using it heavily over the last few days with no issues. Prior to this, it would usually reboot every 2 days. If it doesn't reboot for another few days I'll be happy.
I would normally not stand for this but I just love the phone and if I got something else it'd probably be the iPhone 3G which has perhaps more software bugs and issues than the N78-3!!
Best of luck. Here's hoping they release an update soon.

Facing an error your post has been flagged and it is currently under addtional verification

Similar Messages

Maybe you are looking for