Facing pages when Digital Publishing

I used document setup to change a document's intent to Digital Publishing - the master still shows facing pages, which I think is not supposed to show when intent is set to digital publishing.
Anybody seen this? Have a workaround.It's not a show-stopper, but I prefer not to have hanging chads when I go to publish.
P.S. great job with the live demo today Colin and Bob.

Sorry for the delay.
In such scenario you have to provide a dummy MSO with 2 empty states for every page. You can use master pages to make your work faster. For every MSO you set a slideshow with "swipe to change image" checked. This will prevent from swiping to next or previous article.
In the article properties leave the "horizontal scroll only" option unchecked, to allow vertical scrolling within your articles. Also set smooth scrolling to "Off (Snap to Page"). You have to provide buttons with actions "Go to URL" on every page. I would suggest using "navto://relative" format, as described here:
http://helpx.adobe.com/digital-publishing-suite/help/hyperlink-overlays.html#relative_navt o_links
All that said, I am rather skeptical of using button navigation throughout the app. Swipe is far more natural on tablets, and it doesn't constrain your other interactivity on the page as much as dummy MSO. I use this solution mainly when I want to direct my readers to some specific place in the app, or to provide them with a multiple choice, instead of letting them just continue linear reading.
Regards,
Tomek

Similar Messages

How can I publish the alterations I have made to my iWeb pages when the ' Publish Site' button and 'Publish Site Changes' on the file dropdown are grey?

How can I publish the alterations I have made to my iWeb pages when the ' Publish Site' button and 'Publish Site Changes' on the file dropdown are grey?

this is a perfect question for the users in the iWeb forum. https://discussions.apple.com/community/ilife/iweb. Good luck.

Block Pages in digital publishing

hello,
I wanted to know if it is possible to lock the pages of an application of digital publishing in such a way that the transition from one page to another occurs only with buttons and not through the horizontal scroll.
thanks
Paolo

Sorry for the delay.
In such scenario you have to provide a dummy MSO with 2 empty states for every page. You can use master pages to make your work faster. For every MSO you set a slideshow with "swipe to change image" checked. This will prevent from swiping to next or previous article.
In the article properties leave the "horizontal scroll only" option unchecked, to allow vertical scrolling within your articles. Also set smooth scrolling to "Off (Snap to Page"). You have to provide buttons with actions "Go to URL" on every page. I would suggest using "navto://relative" format, as described here:
http://helpx.adobe.com/digital-publishing-suite/help/hyperlink-overlays.html#relative_navt o_links
All that said, I am rather skeptical of using button navigation throughout the app. Swipe is far more natural on tablets, and it doesn't constrain your other interactivity on the page as much as dummy MSO. I use this solution mainly when I want to direct my readers to some specific place in the app, or to provide them with a multiple choice, instead of letting them just continue linear reading.
Regards,
Tomek

Cross-references go to facing page when PDF'd

Is there a workaround for this? Mac, CS5.5. (I also have CS6 but still can't get the file to open!!)
I have a large book file, with facing pages. Cross-references throughout, exporting to PDF via PDF (Print) to get separate pages rather than spreads.
The resulting bookmarks are all correct, but the cross-references go to what would be the right hand page instead of the noted page. So, if the cross-reference is supposed to go to left page 84, it actually goes to right page 85. That works fine if the PDF is viewed in 2-up view, or exported as full spreads, but not in single page view.
Is there a solution? Or is it fixed in CS6?

Yes. There are five in one book. All the page links lead to pages in documents within the book.
The Contents page is in one InDesign document. It has links in it to pages within the other four InDesign documents.
Currently, clicking on the links in the exported PDF of the book takes you to page 1 - except for links to pages within the same InDesign document, and one link on the Contents page which leads to the correct page (that link is set up in the same way as the others).
EDIT: BTW - I will be leaving work in about 30 minutes, so I won't be able to try out any fixes until tomorrow, about 10am (London, UK).
UPDATE: When I checked the broken hyperlinks in Acrobat Professional, all of the page links that led to the cover were set to go to page 0. But in the InDesign document, they're all set to go to the correct page.
Message was edited by: richard_cosgrove

Creating a visible signature on multiple pages when digitally signing a PDF

When I digitally sign a PDF file, is there a way to make the visible signature appear on every page of the PDF at once, instead of just the current page? Specifically, I'd like to place a scan of a professional engineer's seal on every sheet of a PDF containing MEP drawings, in one step, as I digitally sign the file with Adobe Acrobat. I've done some research and haven't found any relevant information for this particular question, so maybe it's not possible? I'd like to know for sure, one way or the other.
Thanks much.
Robert

The appearance of a signature is something of no importance at all, so just stamp the pages first, then sign withou an appearance.

How to add separating line between facing pages when exporting to PDF

Hello,
I've searched a lot and could not find an answer to my question...
I'm creating several multi-page documents with facing (left-right) pages. After that I export these to PDF. I use the same setting for all my files and same settings for exporting.
But one of the documents when exported doesn't have a separating line between the left and right pages and they seem to be one. How can I add this separating line?
Thanks in advance!

Hi Peter, thanks you for your reply. If I understand correctly what you are saying, I would say this is not the case, because both are exported as spreads and both are displayed 1-up. Please see attached screenshots - first two show exporting options and second two show how it will look in Acrobat if both are displayed 2-up.

When is Digital Publishing Suite coming to Cloud?

Does anyone have an idea when Digital Publishing Suite will be coming to cloud subscription? Is it weeks / months?

From this page here:
http://www.adobe.com/products/creativecloud/stay-a-step-ahead.html
Expect more amazing apps and services in the coming months. Some of the first to arrive will be:
• Adobe Photoshop® Lightroom® 4
• Adobe Digital Publishing Suite, Single Edition
• Adobe Edge full version

Using Pages, how do I get out of "facing pages?"

How do I get out of "facing pages" when using PAGES ?

Hi Joanne, I don'y have Pages, but perhaps we can work backwards from this info in it's PDF on usage...
Here are ways to view facing pages:
Click View in the toolbar and choose Page Thumbnails to view facing pages in the thumbnail view.
Click the Page View control in the bottom-left corner of the window, and then choose Two Up from the pop-up menu to view facing pages side by side in the main document window.
http://manuals.info.apple.com/en_US/Pages09_UserGuide.pdf

When I publish my site on one specific page where i've added {tag_pagecontent} I get the error:Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.

When I publish my site on one specific page where I've added {tag_pagecontent} I get the error:
'Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.'
I'm trying to get a blog module going, I've even deleted the html insert bog with the tag in and re-published which then I don't get the error but as a result no blog either. But then I add the tag in again and publish the error comes back. I've used the dev console and it says that my musicians sample.css is out of date but why is it only out of date when I add in html to my muse site?
HELP!!!! I've searched other threads and to no avail I'm publishing so no direct ftp going on. the only thing I changed in business catalyst was the module stylesheet in order to style the blog. I've tried uploading and replacing all files nothing seems to work. the site is here:
http://www.musicstudentsforhire.co.uk/musicians-samples.html
It's only this page as it has the blog on. Also I've noticed when I've re-published occasionally it will show the mobile version on my desktop and not the desktop version??? no idea why that's happening so I've had to turn that off. any explanation on why that is happening would also be much appreciated.

I haven't received an answer as of yet, I'll post t on here when I do. I de-activated the mobile site because it's my clients site so he needs it to be operational during the day. I hope someone gives me an answer soon.

TS2167 I changed my header in iweb and when I published the site the font had shrunk and it displayed incorrectly. It was only on my home page, not on others. I have iweb 3.0.4. Help!?!?

I changed my header in iweb and when I published the site the font had shrunk and it displayed incorrectly. It was only on my home page, not on others. I have iweb 3.0.4. Help!?!?

Just in-case anyone els runs into this, I figured it out... I was working from my hotel and apperantly the fire wall was not allowing anything to uplaod, but I wasn't getting an error message from iweb, it would say that everything was published succesfully even though it wasn't. Once I went home and used my connection eveything worked fine.

I'm editing a 24 page booklet which when I open in Pages 5.0.1 is single pages. How can I change the format to facing pages to give to the printer?

I'm editing a 24 page booklet which was done about a year ago in another version of Pages. When I open it now in Pages 5.0.1 it comes up as single pages. My question is how do I get it back to a facing pages format to give to the printer?

Export to Pages 09 and use that. Version 5.1 lacks the ability to use alternating left/right margins and many,many other features that are present in Pages 09. Pages 5.1 adds back a vertical ruler ( why ever was it omitted?) but still lacks about 90--that's nine zero, as in "nearly 100"-- features that were in Pages 09. Some of these features are obscure , some very basic. At this point, however, Pages 5.1 is a novelty application, basically useless for any serious work

Strangeness on iWeb Pages When Published

I have multiple pages in iWeb that are all the same look but different text content. All the menus are the same. The colors are the same. I will only be changing text and the page name. So, I create the page the way I want and then duplicate the pages. I publish it to make sure all the links work but to my amazement, some of the page look right but many of the pages are different. I should add that I am not using the built in navigation menus--I created my own using text block with hyperlinks because I needed them to look a certain way. The menus are distorted (stretched, size reduced, position shifted), some of the menus (text blocks with hyperlinks) have switched locations/order, the body regions (with graduated fill) are shifted down or even non-existent. I have a set of links in a text block (paragraph is a link) and the text formatting is also changed in different ways on each page (spacing is off, colors are different, link underlining could be on or off).
These are just one page duplicated and the page names changed with all the hyperlinks added.
I did notice that early on in my development, some page names also caused similar problems. If I named a page "About Us", I had similar problems but "About Me" worked, as did "ABOUT US". On some of the pages, the order of stacking (Send to back, Send to front) changed to menus in different ways. I know this sounds strange but this is my experience yesterday/today. I am so confused
Latest version if iWeb, latest Mac OS X Snow Leopard updates, 27" iMac i5 processor, 8 GB RAM, lots of hard drive space

Yes, you must use only the basic characters for site and page names. The following gives some info on page naming and characters not to use.
Renaming a website or webpage
You can rename a site or page at any time by double-clicking its name in the site organizer and typing the new name.
The page name appears at the top of the visitor's browser.
The site name is included in the website's address (URL):
http://web.mac.com/your account name/
or
http://web.me.com/your account name/
Renamed pages and sites (as well as the site's URL) change online the next time you publish.
IMPORTANT: If you rename a site, previously created links to your site won't work; be sure to notify your visitors, especially your blog or podcast subscribers.
iWeb now converts spaces in site names to "_". Also avoid non-Roman characters; many get converted to numbers when you publish.
Other characters that aren't recommended for use in website names are: forward and backward slashes (/ \), brackets ([ ]), tilde (~), exclamation point !, question mark (?), "at" sign (@), number sign (#), dollar sign ($), ampersand (&), asterisk (*), colon (:), equal sign (=), comma (,), and single and double quotation marks (' "). Using these characters may result in names with strange numbers in them.

One page in my site has 3 columns but when I publish the site it shows up with 2 columns

I set up the site with 2 columns per page, except for one page which has 3 columns. I looks right in iweb, but when I publish the site it still shows up with 2 columns like the other pages...any idea how to correct that?

Clear your browser's cache (Command+Option+E for Safari) and reload the page.
What's the URL of your site so we can examine it first hand?
OT

IWeb movie pages, when published -- no movies

my iWeb movie pages, when published, came up lame, no movies, only areas where the movies should have been, all with faint Q's with question marks inside them
LONG STORY SHORT, MAKE SURE YOUR MOVIES (as well as being located in your MAC HD and its proper MOVIE sidebar, that you CUT AND PASTE all your MEDIA YOU'RE USING IN YOUR iWeb SITE,
CUT AND PASTE PHOTOS, MOVIES in dupe form right into your desktop where you've published your iWEB site folder.......that way, any browser, a .mac or outside web host, can locate your media better so that you don't get GHOST MEDIA PUBLISHING LIKE I DID...hopefully this will help both of us
ALSO, in any iWeb website (named SITE in your desktop, or iDisc, or whatever or wherever you publish it, or even if you can find where on earth on your HD it is published, remember, if you have any MEDIA at all, NOTE IN MY CASE MEDIA MEANS MOVIES (not photos, so I'm not speaking to the photo blogs people, only iWeb MOVIE folks) anyway, all the compressed poetry video clips are right there, in a separate folder called MEDIA, that is every iWeb site, when published to .mac or a folder, which contains movies in .mp4 format or .mov format, all these will appear right in your site's MEDIA FOLDER....
this is important as a concept....
also, if you're using an outside web host like me (so that all my movies will LOAD QUICKLY), don't forget when FTP'ing (file transfer protocol'ing) your iWeb changes to your web host from your original MAC HD folder....remember to also send to the FTP/outside web host your MEDIA folder inside your SITE
(which i only realized a couple hours ago, and which totally was a revelation, so i'm passing it along to you guys)....
if you'd like to know exactly what i do here in nyc, i video the poetry scene, now for 20 years, and create educational poetry DVDs.... and my website is today's equivalant of operating a virtual business.....
....oh-oh, since I video poetry in NYC and go direct into a standalone DVD recorder to make single tracks of each poem...and then through Popcorn's mp4 program, I can make a movie file
then..through QuickTime Pro's streaming compression system, reduce that file size to under 5 MBs,
well, after lots of headaches, i am able to have 200 streaming video clips on an iWeb site, which apple itself said was impossible, that iWeb was only geared for less ambitious projects
okay, so that is cool..until yesterday, when i began the whole process again with completely new poetry video clips....
first, the iWeb pages were designed correctly...that took time....then i published the new pages to .mac, and only some of the movies showed up on the published pages, some had a big bright Q (which means the browser identifies the movie and will within 20 seconds load that movie), but what wracked my brain all day and night yesterday, why were there areas where the browser only showed the faint Q/Question mark inside (meaning the browser cannot find the movie)
so what the.....!
also i'm going from an iWed Folder to an FTP so I can use an outside web host and bypass THE MUCH SLOWER .mac browser (too slow when using movie clips for visitor to your site having to wait valuable seconds for **** movie to appear...with outside web host process almost immediate)
.....any similar experiences?

I am having the same problem.
Now I am using iWeb 2.03. So when I uploaded the site to my server I see the Media folder you were talking about, and the videos are there. But when I go to the website I still get the faint Q with the question mark.
Here is my site. http://mnorland.dadeschools.net
The videos are supposed to be in the Athletics page, then go to football highlights.
Any help would be appreciated.

How do I get rid of the page border when I publish a page?

As you can see from this photo, there is a line around the page which I'd like to get rid of. All the border strokes are set to 0 in Muse, but it's still there when I publish. Any help would be greatly appreciated

You have a 1 pt black stroke on your page.
Deselect everything, and set the stroke to 0 or the stroke color to none.

Facing pages when Digital Publishing

Similar Messages

Maybe you are looking for