Fact table with datetime measure showing #value error while browsing the cube

Hi All,
I have a cube with a fact table having datetime measure.
when I browse the cube, I am able to see the data for all measures except  for the measure with the datetime as datatype.
Thanks in advance.

Hi jarugulalaks,
Actually this forum is to discuss:
Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
To make this issue clearly, would you mind letting us know more information about this issue? Whether it is the VS IDE issue? Which language are you using? Which kind of app are you developing? Maybe you could share us a screen shot about it.
But like this case posted by you here:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/bc2d30b8-a60d-4f0f-a273-b7cf0f5aaed5/value-error-for-datetime-measure-in-ssas?forum=visualstudiogeneral#bc2d30b8-a60d-4f0f-a273-b7cf0f5aaed5
If it is the SSAS issue, please post this issue to the SSAS forum for dedicated support.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • My I Mac showed an error while updating the OS and now just hangs. What should I do?

    I Mac asked me to update the OS from 10.7.3. It showed an error and now the computer just hangs. Its become excuriatingly slow. Takes about 15-20 minutes to boot up and takes hours to perform any function. I tried to update the OS again but it keeps showing an error in connecting to the server. What do I do.?

    Have you tried booting into the Recovery HD to check/repair your disk. Restart holding Command+R - once booted select Disk Utility and then select Macintosh HD and click on 'repair disk' If it fixes anything click repair disk again until you get a clean pass. Whilst in Disk Utility you could also 'repair disk permissions' With Macintosh HD still selected click on 'repair disk permissions'. Once done, restart as normal from the Apple menu.
    Then try updating again using the 'combo', available here: http://support.apple.com/kb/DL1582
    If you still have problems you could try a Safe Boot: restart holding down the shift key until you see the grey progress bar. Once booted restart as normal from the Apple menu.

  • Error while transporting the cube

    Hi all,
    While I was transporting my cube from Development box to Acceptance box, following error occured.
       Execution of programs after import (XPRA)
       Transport request   : GCDK905220
       System              : NCA
       tp path             : /usr/sap/NCA/DVEBMGS01/exe/tp
       Version and release: 372.04.10 700
       Post-import methods for change/transport request: GCDK905220
          on the application server: bdhp4684
       Post-import method RS_AFTER_IMPORT started for CUBE L, date and time: 20080802045222
       Program terminated (job: RDDEXECL, no.: 04522200)
          See job log
       Execution of programs after import (XPRA)
       End date and time : 20080802045237
       Ended with return code:  ===> 12 <===
    Actually transport failed but the cube was present in the Acceptance box in inactive state
    Please help me for the same.
    With thanks and regards
    Mukul Singhal

    Hi Mukul,
    This is an RC=12 issue.Contact the basis team or raise ticket basis team stating that your specified transport request is got terminated.Basis team will resolve the issue and then you can Import the transport into your acceptance system.
    I hope it will help you.
    Regards
    Suresh B.G.

  • Run Time error while activating the cube 0pp_c03

    Hi All,
    I encountered this error while activating the info cube 0pp_c03
      An exception occurred which is explained in detail below.
      The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
      and
      therefore caused a runtime error.
      The reason for the exception is:
      No text available for this exception
    Regards
    Rohit

    Hi,
    Please check in ST22 for any relevant short dump. the error message is not of much help in anlyzing the problem
    or
    Perform the consistency test with 'RSRV' -->All Elementary Tests --> Master Data --> 'Compare Number Range and Maximum SID for the characteristic 0REQUID'. and correct the error
    Regards,
    Marasa.

  • 'dimension attribute was not found' error while refresing the cube in Excel

    Dear All,
    Thanks for all your support and help.
    I need an urgent support from you as I am stuck up here from nearly past 2-3 days and not getting a clue on it.
    I have re-named a dimension attribute 'XX' to 'xx' (Caps to small)in my cube and cleared all dependencies (In Attribute relationship tab as well).
    But while refreshing the data in excel client (of course after processing the full cube) I get an error
    'Query (1, 1911) the [Dimension Name].[Hierarchy Name].[Level Name].[XX] dimension attribute was not found' error.
    Here I am trying to re-fresh an existing report without any changes with the new data.
    Does not it re-fresh automatically if we clear the dependencies or there something that I am missing here (Like order of the dependencies).
    Cube processed completely after modifications and able to create new reports without any issues for same data. What else could be the reason?
    Can some one help me here?
    Thanks in Advance and Regards,

    Thnaks alot Vikram,
    In se11  ,when i was trying to activate the  /BIC/FZBKUPC , it is showing the warnings  like
    Key field KEY_ZBKUPCP has num. type INT4: Buffering not possible, Transport restricted.What it means.
    In PErformance Window it is showing like:
    A numeric type was used for a key field. A table of this sort cannot be buffered.When buffering, the table records for numeric values cannot be stored in plain text.
    Procedure
    You can enter "no buffering" as an attribute of the technical settings and then repeat the activation process. The table is not buffered.
    If you want to buffer the table, you must replace the type in the key field by a character type, i.e. that you must modify the table.
    Please adivice with your valueable suggestyions.
    Thanks Vikram.

  • Error while Transporting the cube to Testbox

    Hi  All,
    I  Have enhanced my cube  with new Keyfigurs & transportinmg to Test box .It is giving errors like:
    Key field DIMID has num. type INT4: Buffering not possible, Transport restricted
    The SQL statement was not executed
    Table /BIC/FZBKUPC (Error adjusting the database)
    Table /BIC/FZBKUPC could not be activated
    Errors occurred during post-handling RS_AFTER_IMPORT for C
    ZBKUPC InfoCube could not be activated etc........ in Method  execution of Transport Request uncder se09.
    eventhough infocuibe is active in Developement ,But now it is inactive in Test Box & update rules also inactive in Test Box.
    Very thanks in advance.
    Please suggest me what i need to do.

    Thnaks alot Vikram,
    In se11  ,when i was trying to activate the  /BIC/FZBKUPC , it is showing the warnings  like
    Key field KEY_ZBKUPCP has num. type INT4: Buffering not possible, Transport restricted.What it means.
    In PErformance Window it is showing like:
    A numeric type was used for a key field. A table of this sort cannot be buffered.When buffering, the table records for numeric values cannot be stored in plain text.
    Procedure
    You can enter "no buffering" as an attribute of the technical settings and then repeat the activation process. The table is not buffered.
    If you want to buffer the table, you must replace the type in the key field by a character type, i.e. that you must modify the table.
    Please adivice with your valueable suggestyions.
    Thanks Vikram.

  • Java.sql.SqlRecoverableException error while querying the cube

    Hi
    I get the following error when I try to query the cube from a Java program
    java.sql.SqlRecoverableException: no more data to read from the socket.
    This error occurs sometimes and sometimes it does not occur.
    We observed that if many people simultaneously try to query the cube the error crops up.
    Is this a bug or is there a solution or a method to deal with this sort of situation

    That sounds like the connection to the database is not there, or was dropped. Check that you are not maxed out on the number of processes.

  • Oracle Express Error while building the cube

    When we try to build the Express cube using Relation Access manager's Hybrid Maintenance, We encountered the following error raised by the exception manager.
    "SYSTEM ERROR RSALOC02"
    We are using ODBC drivers for connecting and fetching data from oracle RDBMS. When we checked the Log file of the cube, junk characters were printed at the end of the Log.
    signal errorname errortext
    2 FCH.D3 FCH.D4 FCH.D5 FCH.D6>-
    8 THEN-
    ' ' _sqlerrm)
    p
    2   hkT2 ! _W2p )  1 @ H H>8 @U-0 r

    It could be the version of ODBC you are using, or some invalid characters in the data you are trying to fetch. Since this issue is very specific you would be better to open a TAR on metalink. Thanks.

  • THE System showing ABAP error while activating the "lead questionairre".

    Hi Experts,
    I have ceated a new "questionnare" for the leads.
    while making it as active i am getting ABAP errors.
    Please let me know what has went wrong in this area.
    I have copied  the standard one  to create a new questionaree.
    waiting for the response.
    Thanks in advance
    Prajith P

    Hi,
    Are you loading from the Flat File or from ECC?
    If you are loading from FlatFile then you have to specify the InfoObject names in the "Template InfoObjects" area in DataSource-->Fields Tab.
    Then when you create the Transformation then the Rules will be created Automatically.
    Regards,
    rik

  • Error while switching the cube to plan mode.

    Got an error In the process chain plan mode on step
    Loading transactional cube ZTPM_T02 - switch not possible
    when i went to that cube and we have yellow request with
    Requests without Monitor Log: APO Request or Terminated Request Generation.
    Regards,
    Bilvanth

    Hi,
    Chk out this thread ,
    Data Request remains in yellow status after RSAPO_CLOSE_TRANS_REQUEST
    Regards,
    Priya.

  • Receiving error while building the cube

    We are trying to populate a cube using AWM with relatively few data records and are receiving following error stack:
    oracle.express.idl.util.OlapiException: java.sql.SQLException: No more data to read from socket
    at oracle.express.idl.ExpressOlapiDataSourceModule.DataProviderInterfaceStub.generic(Unknown Source)
    at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
    at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
    at oracle.olapi.data.source.DataProvider.executeBuild(Unknown Source)
    at oracle.olap.awm.wizard.awbuild.UBuildWizardHelper$1.construct(Unknown Source)
    at oracle.olap.awm.ui.SwingWorker$2.run(Unknown Source)
    at java.lang.Thread.run(Thread.java:595)
    Our database is like:
    Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Running on SunOS 5.9
    Does anybody have an idea as to what could be causing this error?
    Thanks,
    Thomas

    This is a very generic "session has gone away" error that could be caused by any number of things. It may be OS related, but it may also be generic. You can look in the alert log for clues and you can also look in the CUBE_BUILD_LOG to see what was happening immediately before the error. Something like the following query would be a good starting point (assuming that the error was the last build you ran and that you are not using a RAC system).
    SELECT command, status
    FROM cube_build_log
    WHERE build_id = (SELECT max(build_id) from cube_build_log)
    ORDER BY time

  • Error while releasing the custom table

    Hi Everyone,
    Modified the User defined include files of a particular table for one of our requirements ( In the function group of the table maintenance generator ) and encountered an error while releasing the request to Quality server, the error disappeared after regenerating the table, this seem to be happening only when the user includes of a table maintenance is introduced/modified, why the release doesnt work when there is any change in the maintenance generator?,
    Rgds,

    Hi Sailatha,
    After modifying, you need to re-generate everything so that, the changes come in effect.
    Trying to release without re-generating will surely result in error.
    Regards,
    Raj

  • Error while browsing RSViewer.aspx in SSRS

    Hi,
    I am getting the below error while browsing the RsViewer.aspx (Or rdl file). I have moved the rdl file from one environment (where I could browse the rdl file) to another environment. In the new environment, I am getting the  below error while browing
    the rdl file. Both environments are having the same configuration (SQL server 2008 R2 SP3).
    "Type 'System.Web.UI.WebControls.PlaceHolder' does not have a public property named 'style'  "
    Thanks in advance,
    Krishna

    Hi krish456,
    According to your description, after you move SSRS report from one server to another, you got the error message when you preview the repot: Type 'System.Web.UI.WebControls.PlaceHolder' does not have a public property named 'style'.
    As per my understanding, you are using object of System.Web.UI.WebControls.PlaceHolder while a different type was expected, this different type has style properties, which were needed for the report to run properly. It seems that you should be using System.Web.UI.WebControls.Style.
    Reference:
    PlaceHolder Class
    Style Class
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    Wendy Fu
    TechNet Community Support

  • Error while browsing assets | ATG10.2

    Hi
    we are getting the following error while browsing the assets in Content Administration
    We upgraded our application from ATG9.4 to ATG10.2 and we are using WAS 7.0.0.25 as application server.
    [11/6/13 14:50:39:403 CST] 00000016 servlet       I com.ibm.ws.webcontainer.servlet.ServletWrapper init SRVE0242I: [BCCEAR] [/AssetUI] [/assetPicker/plugins/repositorySearchResults.jsp]: Initialization successful.
    [11/6/13 14:50:51:171 CST] 00000013 servlet       I com.ibm.ws.webcontainer.servlet.ServletWrapper init SRVE0242I: [BCCEAR] [/atg] [/templates/layout/html/100.jsp]: Initialization successful.
    [11/6/13 14:50:51:312 CST] 00000013 servlet       I com.ibm.ws.webcontainer.servlet.ServletWrapper init SRVE0242I: [BCCEAR] [/PubPortlets] [AssetsPortlet]: Initialization successful.
    [11/6/13 14:50:51:377 CST] 00000013 servlet       I com.ibm.ws.webcontainer.servlet.ServletWrapper init SRVE0242I: [BCCEAR] [/PubPortlets] [/html/AssetsPortlet/detail.jsp]: Initialization successful.
    [11/6/13 14:50:51:515 CST] 00000013 servlet       I com.ibm.ws.webcontainer.servlet.ServletWrapper init SRVE0242I: [BCCEAR] [/PubPortlets] [/html/AssetsPortlet/assetProperties.jsp]: Initialization successful.
    [11/6/13 14:50:51:632 CST] 00000013 servlet       I com.ibm.ws.webcontainer.servlet.ServletWrapper init SRVE0242I: [BCCEAR] [/PubPortlets] [/html/views/item/gsa/oneColumnView.jsp]: Initialization successful.
    [11/6/13 14:50:51:730 CST] 00000013 servlet       I com.ibm.ws.webcontainer.servlet.ServletWrapper init SRVE0242I: [BCCEAR] [/PubPortlets] [/html/views/property/string/simpleView.jsp]: Initialization successful.
    [11/6/13 14:50:51:737 CST] 00000013 SystemOut     O /atg/dynamo/servlet/dafpipeline/DynamoServlet --- java.lang.NullPointerException
    at org.apache.taglibs.standard.tag.common.fmt.BundleSupport.findMatch(BundleSupport.java:302)
    at org.apache.taglibs.standard.tag.common.fmt.BundleSupport.getLocalizationContext(BundleSupport.java:180)
    at org.apache.taglibs.standard.tag.common.fmt.SetBundleSupport.doEndTag(SetBundleSupport.java:80)
    at com.ibm._jsp._simpleView._jspx_meth_fmt_setBundle_0(_simpleView.java:911)
    at com.ibm._jsp._simpleView._jspService(_simpleView.java:130)
    at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:99)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)..............................................
    11/6/13 14:50:51:740 CST] 00000013 servlet       E com.ibm.ws.webcontainer.servlet.ServletWrapper service SRVE0068E: Uncaught exception created in one of the service methods of the servlet /html/views/property/string/simpleView.jsp in application BCCEAR. Exception created : java.lang.NullPointerException
    at org.apache.taglibs.standard.tag.common.fmt.BundleSupport.findMatch(BundleSupport.java:302)
    at org.apache.taglibs.standard.tag.common.fmt.BundleSupport.getLocalizationContext(BundleSupport.java:180)
    at org.apache.taglibs.standard.tag.common.fmt.SetBundleSupport.doEndTag(SetBundleSupport.java:80)
    at com.ibm._jsp._simpleView._jspx_meth_fmt_setBundle_0(_simpleView.java:911)
    at com.ibm._jsp._simpleView._jspService(_simpleView.java:130)
    at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:99)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:831)
    Any pointers will be helpful.
    Thanks

    Thanks David and Gareth
    The issue of browsing assets is resolved now. I had to update the IBM SDK for Websphere to IBM SDK 1.6 SR10

  • Logical fact table with fragmented data sources with different dimensions

    Hello.
    I have a logical fact table with four logical table sources. Three of the LTS's share the same dimensions, but the fourth LTS has one dimension (called Dim_A) less. In the physical layer the dimension Dim_A is joined to the first three physical fact tables, but not to the fourth fact table (since it doesn't have that dimensionality). In the BMM layer the logical fact table is joines to the logical dimansion Dim_A.
    When I run an analysis on this RPD the measures from the logical fact is aggregated correctly (union of all four table sources) as long as I doesn't include Dim_A, but as soon as I include dimension Dim_A I get the error message:
    +State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14052] Internal Error: Logical column Dim_A.Column_X has no physical sources that can be joined to the physical fact table source [Logical table sources (Priority=0): Fact_B.Fact_Y]. (HY000)+
    I would like a solution where the analysis returns correctly aggregated measures also for the LTS with the "missing" dimension, but with a dimension value NULL for this LTS. Or something like this.
    Is there a way to set this up in the RPD.
    Thanks,
    Henning Eriksen

    The SQL could look something like this.
    SELECT dim_a.col_1, fact_a.measure_1
    FROM db.dim_a
    JOIN
    db.fact_a
    ON fact_a.col_2 = dim_a.col_2
    WHERE fact_a.date = '28-nov-2012'
    UNION ALL
    SELECT dim_a.col_1, SUM (fact_b.measure_1)
    FROM db.dim_a
    JOIN
    db.fact_b
    ON fact_b.col_2 = dim_a.col_2
    WHERE fact_b.date = '28-nov-2012'
    UNION ALL
    SELECT dim_a.col_1, SUM (fact_c.measure_1)
    FROM db.dim_a
    JOIN
    db.fact_c
    ON fact_c.col_2 = dim_a.col_2
    WHERE fact_c.date = '28-nov-2012'
    UNION ALL
    SELECT NULL, SUM (fact_d.measure_1)
    FROM    db.fact_d
    WHERE fact_d.date = '28-nov-2012'
    I would appreciate if you could give me some hints for the RPD.
    Thanks,
    Henning

Maybe you are looking for