Fade out of song? Fade icon does seem to do the trick.

Hello,
I have Logic Pro (Academic Version, which I believe should be the same as the full version--except I cannot update to the next version).
I'm trying to fade out the end of the song, except I can't seem to do it with the fade icon. I can't seem to do it with any of my individual files with some exception.
How can I achieve that typical 80's fade out of a song at the end? And what am I doing wrong?
Thank you in advance.
feflower

Hello,
Hello,
I have Logic Pro (Academic Version, which I believe
should be the same as the full version--except I
cannot update to the next version).
Cheers!
I'm trying to fade out the end of the song, except I
can't seem to do it with the fade icon. I can't seem
to do it with any of my individual files with some
exception.
Use volume automation for song fadeouts...on the master output fader.
How can I achieve that typical 80's fade out of a
song at the end? And what am I doing wrong?
For that,you'll need a time machine,mine rents out at 1,200 USD one way trip to that particular decade.You're not doing anything wrong,you are just using the wrong tool for what you wat to do,which is to fade out the entire mix.
Thank you in advance.
feflower
Cheers

Similar Messages

  • NB550D - battery icon does not always reflect the proper balance of time

    I have just recently purchased an NB550D and I must say that at the outset I am very happy with it. It does tend to be a bit slow but I can live with that.
    My problem however is that the battery icon does not always reflect the proper balance of time. For instance after a full charge it may show 9 hours remaining but after a shutdown and restart it will may show 75% and 3 hours remaining. If I shut down and restart it may show 75% and 6 hours remaining
    When I first started the unit I allowed it to fully discharge (through use) three times as was suggested by the salesman at the store but quite candidly it doesn't seem to have made one scrap of difference!
    Any advice will be appreciated.
    Regards

    Remaining time is not credible value of the battery state - it depends on actual duty of processor and the program wich estimates this sometimes shows wrong that time or corrects this after a while. Percentage of charge of battery is much better factor to use!
    But in case your battery loses from 95% to 75% after restart indictates that's something wrong with the battery or program... In my NB550D after restart (pause for 1 day) the battery loses only 2-3% .

  • Have a 10.6.8 mac and the icloud icon does not appear on the system preferences

    Hello,
    I have a 10.6.8 mac and the icloud icon does not appear on the system preference, even if I'ved upgraded the software.
    Renee

    The minimum requirement for iCloud is Lion 10.7.5 (Mavericks preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is now non-functional - you cannot now open or access a MobileMe account.
    To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
    The requirements for Lion are:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price (though it's reported to have been removed from sale in some countries so may well cease to be available generally) but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
    The requirements for Mountain Lion and Mavericks are:
    OS X v10.6.8 or later
    2GB of memory
    8GB of available space
      and the supported models are:
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    Xserve (Early 2009)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    It is available from the Mac App Store (in Applications).
      You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

  • Icon does not appear in the image thumbnail in Bridge

    After processing a camera raw file using the Camera Raw plug-in, an icon does not appera in the image thumbnail in Bridge. Using raw plug-in created april 19 2007 in windows vista. The same CS2 program does create the icon on another computer using Windoes XP. Jim

    Please check your top toolbar left side, you should see a small arrow icon to expend the toolbar, located near the Tools option
    (Ignore the location side in the sample picture, it should be the opposite for your language )
    If you cannot locate the HP Smart Web Printing there either, Click Tools > Manage Addons
    and make sure the HP Smart Web Printing addon is enabled,
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Recently when I install apps, the icon does not appear on the menu screen, also, it shows that it is down loading at the app store and when complete, I can not open it or reinstall it.  Help Please   o,

    Recently when I install apps, the icon does not appear on the menu screen, also, it shows that it is downloading at the app store and when complete, I can not open it or reinstall it. Has happened on the last 4 free apps. Help Please

    Reset your iPad. Press and hold both the power and home buttons for 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till you iPad starts on it's own. Now try and download an app.

  • Bootcamp disk icon does not appear in the System Preferences/Startup Disk. Any help ideas ?

    Everything works fine but the Bootcamp disk icon does not appear in the System Preferences/Startup Disk.
    When I am in Win7 I am easily rebooting my iMac by right-clicking on the Bootcamp icon.
    When I am in Mac OS I wish to do same but that Bootcamp icon does not appear. Everytime I am restarting my iMac and pressing on the Option key to select the Windows disk.
    Does anyone have an idea how to adjust to bring the Bootcamp icon to the Startup Disk panel ?

    Use BootChamp instead; perhaps you have an NTFS 3rd party driver installed and has its own control panel.

  • After installing an App, the icon does not appear on the desktop?

    After installing an App, the icon does not appear on the desktop? Where would I find it?

    Some people have found that an app (usually iBooks for some reason) hasn't appeared on a homescreen until after the iPad has been reset and has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    Also depending on what the app is have you got an age rating set in Settings > General > Restrictions that is hiding it ?

  • I have a imac mid 2011 model, why can't i connect to airplay?  And the airplay icon does not show in the menu.

    I have a imac mid 2011 model, why can't i connect to airplay?  And the airplay icon does not show in the menu.

    Hi there cjperido,
    You may find the troubleshooting steps in the article below helpful.
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts5209
    -Griff W. 

  • Hi all everytime i try to downlod itunes it reaches maybe 97% and then it times out i am not sure what seems to be the problem because my internet connection is fine.. any ideas???

    hi all everytime i try to downlod itunes it reaches maybe 97% and then it times out i am not sure what seems to be the problem because my internet connection is fine.. any ideas???

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the iTunes forum appropriate for your system (Mac or Windows).
    Regards.

  • AppleWorks Icon does not stay in the same position after saving

    After I installed AppleWorks 6.2.8, each time I save the file (word prosessor or data base) the icon on the desktop always moves to the right side of the screen below the hard drive icons. If I drag it to different position, then save the file it will move to the right side of the screen. If the saved file is in a folder, it always goes back to it's origional position. In fact, the same thing happens to other applactions (PhotoShop, TurboCad, etc.). This only happens in OS 9.2.2. It does not happen in OSX 10.4.6. The same situation also happens on my iBook and PowerMac G4 MDD after installing AppleWorks 6.2.8.
    My System: PowerMac 7300, Sonnet 1GHz G4, 1GB memory, OS 9.2.2, OSX 10.4.6
    I checked the AppleWorks preferences and Control Panels and could not find any settings.
    This does not happen with AppleWorks 5.
    Anyone know what has happened? Are there settings I am missing?
    Much Thanks,
    Gene
      Mac OS 9.2.x  

    Hello
    If I remember well, AppleWorks 5 was saving one document by rewriting the old one. Doing that, all the file's attributes where kept.
    AppleWorks 6 writes an entirely new file, so the icon is not preserved. Of course, some of us think that it would have been a good idea to keep the parameters of the old file and "paste" them to the new one.
    I wrote a script doing that but it is not perfecly stable.
    For my own use, I build an alias of every file to which I want to give an icon. The file itself doesn't keep the icon (and its position in the window) but the alias keep it.
    If you are really bothered by the standard icon, create a subfolder in which you store the documents and use these two scripts.
    --[SCRIPT hideIt]
    set leDossier to "Macintosh HD:Users:yvankoenig:Desktop:documents AppleWorks:"
    try
    tell application "Finder" to set name of folder (leDossier & "masqué") to ".masqué"
    end try
    --[/SCRIPT]
    --[SCRIPT unHideIt]
    set leDossier to "Macintosh HD:Users:yvankoenig:Desktop:documents AppleWorks:"
    try
    tell application "Finder" to set name of folder (leDossier & ".masqué") to "masqué"
    end try
    --[/SCRIPT]
    You will see the aliases with their icon and the true file will be safe in the hidden subFolder.
    Yvan KOENIG (from FRANCE dimanche 10 septembre 2006 20:44:29)

  • After installing FF 6.02 on Windows 7, the icon does not appear on the desktop and the program does not appear in the All Programs menu

    I just received a new laptop running windows 7 home premium and wanted to install Firefox on it. I tried to install the most recent version. When i installed 6.0.2, the icon did not appear on my desktop (it was a hidden file in my desktop folder) and the program group does not appear in the start menu's All Programs list. The program *does* run though, at least it did a few times. This happened whether i installed as administrator or not. Installing firefox 3.6.22, though, DID create the program group and desktop icon, and upgrading from there removed them again. installing other programs (e.g. vlc, trillian, etc.) did not cause this behavior. I also tried this both with and without McAfee's realtime protection running.

    Some people have found that an app (usually iBooks for some reason) hasn't appeared on a homescreen until after the iPad has been reset and has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    Also depending on what the app is have you got an age rating set in Settings > General > Restrictions that is hiding it ?

  • Menu Bar - Sound Volume icon does not move with the press of the F key

    So I normally press the F keys to control the Sound Volume, right, just like everyone else does -
    but the Sound Volume icon in the Menu Bar at the top right does not respond to the F key at all!
    Isn't it supposed to react simultaneous with the press of the F key?
    I have to actually use my mouse click to make that volume go up and down.
    The actual volume does work with the F key, it goes up and down.
    But to make the 2 work in sync, I have to point the mouse to the one at the Menu Bar, fiddle with it, and then I can use the F key and both work together at the same time.
    If I haven't touched the Menu Bar one for a while and I only use the F key, the Menu Bar one doesn't move at all.
    It's weird. Any ideas?

    I see what Al is seeing. Normally I just use one method or the other. The Volume Adjustment keys provide visual feedback, so it's unnecessary to check the menu extra, i.e. the Volume menu bar icon, to see the same feedback.
    The slight delay in the reaction of the Volume menu extra, when open and while adjusting the volume with the Volume keys is normal.
    They're independent methods for adjusting the Volume setting. The Volume menu extra takes a moment to refresh when the slider is displayed and you're changing the setting via the Volume keys.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • Windows 10 reservation icon does not show in the tray in flex 14

    I checked out the other thread. I have both the updates installed, infact my system is completely up to date. I also tried running that script, and tried the task scheduler thing. Also tried executing the gwt.exe directly still no good. I tried everything I could find online. I bought the lenovo flex 14 a coule of days ago. The system has been up to date for one day now. But I still dont have the tray icon. I havent disabled any wiindows features from control panel either. I have genuine windows 8.1 single language edition. Any help would be greatly appriciated. Never mind, it just showed up. How do I delete this thread?

    Hi,i placed my res for windows 10 a while ago and have an email confirming the res was made etc...my pc crashed and started running badly three days agoi used the refresh recovery option to reinstall my pc and have applied all updated i could find along theway from win 8 then 8.1 etc..Pc woks find again but now there is no windows 10 icon I followed some help from microsoft to find out why and it sais i dont qualify for the updatewhat has happened between the original version and the refresh  please help  

  • Windows 10 reservation icon does not show in the tray

    Hi
    I have a 1/2 year old lenovo t440p with Windows 8.1 - totally updated on Windows Update.
    A windows 10 reservation icon should be shown on the lower right part of the tray, but it doesn't. A have searched different solutions, and tried manually to run gwx etx.
    I there any reason related to Lenovo, that it is not possible to make a reservation for Windows 10 at present time (it should have been possible since 29 May 2015).
    [Topic title edited to conform to additional posts in this discussion.]

    i have 3 lenovo laptops, W550s, Lenovo edge 15", Yoga 13, HP laptop and desktop, and Toshiba laptop. i have same problem with with only lenovo branded products. all with win 8.1 pro. you must have KB3035583 update installed. some people say that the script below helped them: REG QUERY "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\UpgradeExperienceIndicators" /v UpgEx | findstr UpgEx
    if "%errorlevel%" == "0" GOTO RunGWX
    reg add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\Appraiser" /v UtcOnetimeSend /t REG_DWORD /d 1 /f
    schtasks /run /TN "\Microsoft\Windows\Application Experience\Microsoft Compatibility Appraiser"
    :CompatCheckRunning
    schtasks /query /TN "\Microsoft\Windows\Application Experience\Microsoft Compatibility Appraiser"
    schtasks /query /TN "\Microsoft\Windows\Application Experience\Microsoft Compatibility Appraiser" | findstr Ready
    if NOT "%errorlevel%" == "0" ping localhost >nul &goto :CompatCheckRunning
    :RunGWX
    schtasks /run /TN "\Microsoft\Windows\Setup\gwx\refreshgwxconfig" paste to a notepad file and change the extension to .cmd this did not worked for any of the lenovo laptop.  Lenovo must have a software issue which prevents icon appear. todat microsoft tech remotely worked for 4 hours and fixed w550s. he spent another 4 hrs on second lenovo edge but no success. he is trying to run script above but did not worked on lenovo edge. will try another microsoft tech tomorrow morning. we need lenovo to fix this issue whatever causes this problem. all other brand PCs i have and other PCs we use in office gets the upgrade notification. lenovo please weigh in and fix the issue.

  • HT5137 Words with Friends has frozen. After double clicking the home button, swiping or pressing the icon does not bring up the minus sign.

    On my IPad Words With Friends has frozen. I have double clicked on the home button and identified the WWF icon. When I press and hold or swipe vertically the icon darkens but does not shake or bring up the minus sign. Any suggestions?

    Force close apps
    1. Double tap the home button to bring up the multi-tasking view
    2. Swipe the app's windows upwards to close
    3. The app will fly off the screen
    http://support.apple.com/kb/ht5137

Maybe you are looking for

  • System commands - disk access

    To emulate the "clrscr" command (from C), I am determining the name of the OS and then passing the appropriate command to the Runtime object: if ((menu.osName.lastIndexOf("sun") != -1) || (menu.osName.lastIndexOf("inux") != -1))   System.out.println(

  • What is proper syntax for using PassBack in a Report page select statement

    In my select statement I reference the passBack function using: onClick="javascript:passBack()" In my Page Header I (Typically) define the passBack function as: <script language="JavaScript" type="text/javascript"> function passBack(passVal1,passVal2

  • Creating reports on Applicants

    Hi Gurus, I am trying to create a report on applicants using query sq01. I have picked PCH as my Logical Database but I do not know what other options that are available to me apart from using OBJECTS. My standard screen is giving me the same screen

  • IPAK Selection variable ABAP

    Hi All I am trying to set the value of a selection variable in an Ipak using ABAP using the following code l_t_range-low = datetime. l_t_range-sign = 'I'. l_t_range-option = 'GT'. I need to extract records with a timestamp greater than the value set

  • File permission

    When I click to open files on my MAC a message comes up saying I don't have permission to view, this includes any files that are emailed to me.  I can preview them, but not open them.  I have been having this trouble a little over the past few weeks